• 0
Shop Products $

Polyethylene Stoppers, Kimble Chase - 774240-0024

Polyethylene Stoppers, Kimble Chase - 774240-0019

Polyethylene Stoppers, Kimble Chase - 774240-0014

Polypropylene Solvent Addition Funnels, DWK Life Sciences - 629050-0000, Solvent Addition Funnel, Set of Five

Graduated polypropylene Microcentrifuge Tube. 1.5Ml Self Standing Micrewtube Microcentrifuge Tube Only. Made Of Polypropylene, Can Withstand Temperature From -196C To +121C.Tubes Are Certified Rnase, Dnase, Dna And Pyrogen Free. Graduated. Pk/1000.

BRAND Test Tube Racks, BrandTech - 4341001

VWR Eco Spatulas. Were found to biodegrade an average of 13.9% in the first 162 days of testing under conditions that simulate a biologically active landfill using the ASTM D-5511 test protocol.

Cover Low Loss. Low Loss Cover

Filter. Sparger,Omnifit,Stainless,10 Micron,1/8In Od Tubing

Life Latch New Generation Pail Container. 6.5 gallon white screw-top pail with white gasketed lid. Moisture-resistant. Vacuum-tight seal. Un-certified for Groups 1&2. FDA approved plastic.

POLYPROPYLENE ROUND BOTTOM FLASK SUPPORT, 171MM DIAMETER X 51MM HIGH.

Spinbar Restrainer. Scienceware Spinbar Restrainer

Polypropylene 120ml sterile Colilert collection/test vessel without sodium thiosulfate tablet. Assembled with 38 mm leak-proof screwthread cap. Optically clear & non-flourescent. Meets EPA requirement For Bact-T .

Polypropylene Thermocouple Clamp. Provides the easiest and most secure way to hold thermocouple probes in the laboratory. Accepts 1/16, 1/8 and /4 in dia probes. Stainless steel support arm is 1/4in dia x 8in long.

Polyethylene Stopper. Polyethylene, linear high-density stoppers fit Neck Ground to [standard taper] Stopper size 16. Yellow and blue with a closed bottom. Enlarged flange is designed to protect the neck if the glassware item is tipped over. 6 stoppers per case.

Griffin Beaker, Polypropylene. Translucent polypropylene beaker for compatibility and good chemical and break resistance. With blue-screened graduations. Meets the requirements of ISO 7056. Capacity: 5000mL. Graduation interval: 200mL.

Griffin Beaker, Polypropylene. Translucent polypropylene beaker for compatibility and good chemical and break resistance. With blue-screened graduations. Meets the requirements of ISO 7056. Capacity: 3000mL. Graduation interval: 200mL.

Griffin Beaker, Polypropylene. Translucent polypropylene beaker for compatibility and good chemical and break resistance. With blue-screened graduations. Meets the requirements of ISO 7056. Capacity: 2000mL. Graduation interval: 200mL.

Large Funnel. Polypropylene. Top O.D.: 250mm. Stem O.D.: 30mm. Length: 260mm.

Polypropylene Funnel. Top O.D.: 30mm. Stem O.D.: 2mm. Length: 47mm.

Measuring Scoop. One-piece, molded HDPE (high density polyethylene). Length: 250mm. Volume: 150mL.

Measuring Scoop. One-piece, molded HDPE (high density polyethylene). Length: 185mm. Volume: 65mL.

Antistatic Microspatula, Opaque, 140 mm. Autoclavable for sterile applications. Single-use spatulas help to reduce cross contamination, are resistant to dilute acids and bases, and the unique hollow core minimizes thermal transfer. Comply with FDA regulations for food-contact applications.

VWR Disposable Spatulas. Virgin polypropylene. Economical. Ideal for Transferring, Manipulating, and Mixing Materials. Unique Spatula Shape Aids Collection of Valuable Materials. Help Minimize Cross Contamination. Macro Type. Green. 310mm.

VWR Disposable Spatulas. Virgin polypropylene. Economical. Ideal for Transferring, Manipulating, and Mixing Materials. Unique Spatula Shape Aids Collection of Valuable Materials. Help Minimize Cross Contamination. Standard Type. Blue. 210 mm.

Test Tube Rack, Polypropylene. Holds 40 tubes. Maximum tube diameter: 2cm. 4x10 configuration. Red.

Test Tube Rack, Polypropylene. Holds 40 tubes. Maximum tube diameter: 2cm. 4x10 configuration. White.

Test Tube Rack, Polypropylene. Holds 55 tubes. Maximum tube diameter: 1.8cm. 5x11 configuration. Blue.

Test Tube Rack, Polypropylene. Holds 55 tubes. Maximum tube diameter: 1.6cm. 5x11 configuration. Red.

Test Tube Rack, Polypropylene. Holds 55 tubes. Maximum tube diameter: 1.6cm. 5x11 configuration. Blue.

Test Tube Rack, Polypropylene. Holds 55 tubes. Maximum tube diameter: 1.6cm. 5x11 configuration. White.

Test Tube Rack, Polypropylene. Holds 84 tubes. Maximum tube diameter: 1.3cm. 6x14 configuration. White.

SUPPORT ASSEMBLY, 47MM FRITTED RESERVOIR. Replacement Components. Polypropylene hose connection. Glassware system for vacuum filtration using 47mm membranes.

FEEDING TUBES PLTS 18GAX50MM PNK BX50 - FTP-18-50-50

FEEDING TUBES PLTS 15GAX64MM BLU BX250 - FTP-15-64

HINGE BOX PP F/100 MTUBE BLUE PK5 - 93.877.610

HINGE BOX PP F/100 MTUBE PINK PK5 - 93.877.210

BOX W/LID PP 81 MTUBE BLUE PK5 - 93.876.681

BOX W/LID PP 81 MTUBE ORANGE PK5 - 93.876.381

BOX W/LID PP 81 MTUBE PINK PK5 - 93.876.281

BOX W/ LID 81 MICROTUBE PP NEUTRAL PK5 - 93.876

RACK 18 PLACE F/TUBES 13-15MM PC PK1 - 93.850

INSERT A 6-WELL PET 0.4µM TRANSLCNT PK24 - 83.3930.040

TUBE FLT MIC 1.5ML SFSEAL CAP PCR PK1000 - 72.706.400

TUBE MICR 1.5ML SFSEAL CAP BRN PK1000 - 72.706.001

.5ML MICRO TUBE SAFE SEAL PCR PERF PK500 - 72.704.400

2ML MICROTUBE WIDE HINGE CAP PP PK500 - 72.691

25ML SC TUBE 25X54 FLAT BASE PP CS1200 - 60.9922.270

30ML SC TUBE 25X80 FB PS CS500 - 60.9922.221

TUBE 5ML 16X50 FB PS YELCAP STR CS2000 - 60.9921.532

TUBE 75X13 FCBR NEU CAP ASMGRAD CS1000 - 60.614.011

MICROVETTE APT 250 250UL K2EDTA PK50 - 20.1331.100

FORCEPS DET BROAD TIP PS PK100 - 5378-1062

FORCEPS DET POINTED PS STERILE PK100 - 5378-1061

FORCEPS DET POINTED/ANGLED PS PK100 - 5378-1060

PADDLE PP WHITE 1190MM - 8332P-1

Patient Bedsides, Caplugs Evergreen - 395-6066-T30, 600 ml, Emesis basins

Patient Bedsides, Caplugs Evergreen - 395-6050-A30, 7600 ml (8 qt.), Wash basin

Test Tube Caps, Caplugs Evergreen - 300-2911-020

Disposable Forceps, Burkle - 5378-1052, Disposable forceps, broad tip

Disposable Forceps, Burkle - 5378-1051, Disposable forceps, pointed

Disposable Forceps, Burkle - 5378-1050, Disposable forceps, pointed/angled

Disposable Forceps, Burkle - 5378-0042, Disposable forceps, broad tip

Disposable Forceps, Burkle - 5378-1042, Disposable forceps, broad tip

Disposable Forceps, Burkle - 5378-0041, Disposable forceps, pointed

Disposable Forceps, Burkle - 5378-1041, Disposable forceps, pointed

Disposable Forceps, Burkle - 5378-0040, Disposable forceps, pointed/angled

Disposable Forceps, Burkle - 5378-1040, Disposable forceps, pointed/angled

Resin Pellets Solid Matrix, Environmental Express® - SC400, Resin pellets solid matrix

Accessories for Magnetic Hotplate Stirrers, AREX Digital PRO, AREX-6 Digital PRO, AREC.X Digital, VELP Scientifica - A00000268, Temperature probe AISI 316 Ti

TOP PLATE ONLY 6 PLACE BILL-BOARD PP - CG-1869-10

Paddle Stirring Polypropylene 16.7X171Cm. Stirring paddle, Material: polypropylene, for gentle stirring in plastic and glass containers, Shatterproof, Warp res, Dimensions: Length: 19cm (7.5 inch), Width: 16.7 cm (6.6 inch), Total length: 171 cm (67.3 inc

Paddle Stirring Polypropylene 13X117 Cm. Stirring paddle, Material: polypropylene, for gentle stirring in plastic and glass containers, Shatterproof, Warp res, Dimensions: Length: 15.5cm (6.1inch), Width: 13cm (5.1 inch), Total length: 117cm (46.1 inch)

Plastic screw-caps with aperture, red, GL 25, Material: PBT, For Use With GL45 laboratory glass bottles

Pouring ring, GLS 80, blue (PP) for Quick release closure for Duran GLS 80 laboratory bottle.

Premium pour ring, TPCH260, -196 to +260 deg C, with out colorants USP/FDA conformity, gl45, 4mm.

Plasticware Starter Kit, Beaker Set, Graduated Cylinder Set of 4 (10, 25, 50 & 100ml), Wash Bottle 250/500 ml, Reagent Bottle, PP, Narrow Mouth 250/500 ml, Reagent Bottle, PP, Narrow Mouth, Reagent Bottle, PP, Wide Mouth, Reagent Bottle, PP, Wide Mouth, Measuring Jug

Carrier Tray 15x 9.5x 4.5 in. Carrier Tray, Polypropylene molded carrier tray is steam autoclavable, builtin handle for easy carrying of reagent bottles or other laboratory ware using one hand. Overall depth including the handle is 6 in, nestable for easy storage when empty, Size: 15x 9.5x 4.5 in

Laboratory Tray 15 x 12 x 3 in. Laboratory Tray, Multi-purpose polypropylene molded trays can be used for sterilizing, drying glassware, porcelainware, and other laboratory supplies, These steam autoclavable trays have tapered walls designed for nesting, Size: 15 x 12 x 3 in

Laboratory Tray 18 x 14 x 3 in. Laboratory Tray, Multi-purpose polypropylene molded trays can be used for sterilizing, drying glassware, porcelainware, and other laboratory supplies, These steam autoclavable trays have tapered walls designed for nesting, Size: 18 x 14 x 3 in

PVC Tubing Caps, Dempsey Industries - CB3

CAP 18-400 RIBBED W/FOAMED PE LINER PP - 12698-178

CUP SUCTION PE 8OZ F/SPRAY BOTTLE - TGS-503

PVC Tubing Caps, Dempsey Industries - M68

Plastek Pad with Custom Foam Pad, Protektive Pak® - PPK-28844, Plastek Pad with Custom Foam Pad

Cover for Industrial Over Step, Dempsey Industries - 025-0185-5CC, Industrial over step cover

PVC Tubing Caps, Dempsey Industries - M67

PVC Tubing Caps, Dempsey Industries - M66

PVC Tubing Caps, Dempsey Industries - M65

CONTAINER WHITE POLYETHYLENE 64OZ - 81258

PVC Tubing Caps, Dempsey Industries - B55

PVC Tubing Caps, Dempsey Industries - M55

PVC Tubing Caps, Dempsey Industries - M57

PVC Tubing Caps, Dempsey Industries - M59

PVC Tubing Caps, Dempsey Industries - M60

PVC Tubing Caps, Dempsey Industries - M58

PVC Tubing Caps, Dempsey Industries - B45

PVC Tubing Caps, Dempsey Industries - M56

Storage Bags and Sheetings, Sunland Manufacturing - 16X100, Poly film, semi clear white, LDPE, thick

PVC Tubing Caps, Dempsey Industries - M54

PVC Tubing Caps, Dempsey Industries - B19

PVC Tubing Caps, Dempsey Industries - M48

PVC Tubing Caps, Dempsey Industries - M47

PVC Tubing Caps, Dempsey Industries - M46

PVC Tubing Caps, Dempsey Industries - M41

PVC Tubing Caps, Dempsey Industries - B49

PVC Tubing Caps, Dempsey Industries - B40

PVC Tubing Caps, Dempsey Industries - M15

PVC Tubing Caps, Dempsey Industries - M30

SPILLMASTER BLUE - 9520073

PVC Tubing Caps, Dempsey Industries - M36

PVC Tubing Caps, Dempsey Industries - M11

PVC Tubing Caps, Dempsey Industries - M6

PVC Tubing Caps, Dempsey Industries - B40S

PVC Tubing Caps, Dempsey Industries - B43

PVC Tubing Caps, Dempsey Industries - B35

PVC Tubing Caps, Dempsey Industries - B20

PVC Tubing Caps, Dempsey Industries - CB108

PVC Tubing Caps, Dempsey Industries - CB101

PVC Tubing Caps, Dempsey Industries - B16T

PVC Tubing Caps, Dempsey Industries - B90

PVC Tubing Caps, Dempsey Industries - CB100

PVC Tubing Caps, Dempsey Industries - CB1

PVC Tubing Caps, Dempsey Industries - B25

PVC Tubing Caps, Dempsey Industries - B17

PVC Tubing Caps, Dempsey Industries - B24

PVC Tubing Caps, Dempsey Industries - B03

PVC Tubing Caps, Dempsey Industries - B12

PVC Tubing Caps, Dempsey Industries - B18

PVC Tubing Caps, Dempsey Industries - B21

PVC Tubing Caps, Dempsey Industries - B07

PVC Tubing Caps, Dempsey Industries - B02

PVC Tubing Caps, Dempsey Industries - B22

Syringe Covers, Dempsey Industries - 025-0185-010, Dissipative syringe cover

Syringe Covers, Dempsey Industries - 025-0185-020, Dissipative syringe cover

Static Mixer Soldering Nozzle, HISCO - MA6-3-12-S, Static Mixer Soldering Nozzle, 12 Elements

SOLO® Microgourmet Food Container, Marion Janitorial Supply - DCCMN320100, Microgourmet Food Container, Single Compartment

Industrial Over Step, Dempsey Industries - 2.500-SPECIAL, Industrial over step, 2.25×0.7 IN.

Dispensing Narrow-Mouth Caps, Grainger - 3TTP7, Dispensing Narrow-Mouth Caps, 22 - 400 mm

Soldering Cartridges, OK International - TS1WP-1000, Plunger, Natural Extended Wiper LDPE, 2.5, 6, 8, 12 oz.

Soldering Cartridges, OK International - TS120C-250, Cartridges, 355 ml, Natural HDPE

Soldering Cartridges, OK International - TS20P-100, Plunger, White Wiper, MDPE, 20 oz.

Soldering Cartridges, OK International - TS20C-100, Cartridges, 591 ml, Natural HDPE

Azlon Lightweight Funnel 40Mm. Azlon Lightweight Funnel, Material: Pp, Are Economically Priced Funnels with Ribs Which Prevent Air Lock and Speed Filtration, Maximum Temperature for HDPE is 110 Degree C and 120 Degree C for Pp, the Two Smallest Are HDPE,

Carboy Spill Stand 1/2 Gallon. New Folding Carboy Spill Stand, for Bench-Top Use with a Folding Feature to Allow Access to Drawers, High Density Polyethylene with Corrosion Resistant Stainless Steel, Tray Has a 2 Gallon Capacity, Depth Inch: 21 In, Width:

Duran Pure Screw Cap With Lip Seal, From Pfa, Gl 45, Temperature Resistant: -196 To+260 Degree C, For Duran Laboratory, Linerless, Is Optimally Suited To Utilize In Processes Are Both Chemically And Thermally Demanding, Ideal For Dry Heat Sterilization /Depyrogenation, 5Pk.

Regular Trough, Material: Polypropylene, Colour: Blue, Capacity: 100 Ml, cs24.

Chilltrough Disposable, Material: Polypropylene Liner, Capacity: 100Ml case of 1600.

Packaging bucket 5l. Packaging bucket, PP, white, Air-tight closure, Complete with lid, for transport, packaging and storing of various materials, With strong handle, Quality closure, Air-tight closure, Complete with lid, non-aggressive chemicals in environmental protection, hospitals, Size: 5l

Packaging bucket 3l. Packaging bucket, PP, white, Air-tight closure, Complete with lid, for transport, packaging and storing of various materials, With strong handle, Quality closure, Air-tight closure, Complete with lid, non-aggressive chemicals in environmental protection, hospitals, Size: 3l

Packaging bucket 10l. Packaging bucket, PP, white, Air-tight closure, Complete with lid, for transport, packaging and storing of various materials, With strong handle, Quality closure, Air-tight closure, Complete with lid, non-aggressive chemicals in environmental protection, hospitals, Size: 10l

Packaging bucket 2l. Packaging bucket, PP, white, Air-tight closure, Complete with lid, for transport, packaging and storing of various materials, With strong handle, Quality closure, Air-tight closure, Complete with lid, non-aggressive chemicals in environmental protection, hospitals, Size: 2l

Packaging bucket 1l. Packaging bucket, PP, white, Air-tight closure, Complete with lid, for transport, packaging and storing of various materials, With strong handle, Quality closure, Air-tight closure, Complete with lid, non-aggressive chemicals in environmental protection, hospitals, Size: 1l

Thread Adapter Silver. Thread Adapter, Material: Polypropylene, External Thread: US BUTTRESS, Inner Thread: 2in BSP, Color:Silver

Thread Adapter, Material: Polypropylene, External Thread: 61MM - TRISURE, Color:Black.

Thread Adapter, Material: Polypropylene, Internal Thread: 63MM - 2in BSP, Color:White.

Thread Adapter Blue. Thread Adapter, Material: Polypropylene, External Thread: MAUSER, Inner Thread: 2in BSP, Color: Blue

Thread Adapter Natural. Thread Adapter, Material: Polypropylene, External Thread: 61 MM, Inner Thread: 3 in COARSE, Color:Natural

Thread Adapter, Material: Polypropylene, External Thread: 61 MM, Inner Thread: 2in BSP, Color: Gray.

Gas Tight Barrel Pump, Medium-contacting parts PP and PVC soft (hose), Steplessly extendable telescopic tube, Two adapters for original containers, Pump capacity: 200ml per stroke, Configure with universal adapter 34-70 mm, with 2 screw joint adapters 3/4in with lock nuts

Sterilin Universal container 30mL. Sterilin Universal container, RNase free, DNase free, human DNA free, Non-Pyrogenic, Plain, Aseptic, Material: Polypropylene, with self-standing conical base, 1/2 turn Quickstart cap for ease of handling, Maximum RCF: 9500 xg, 95kPa compliant, Capacity: 30mL

Sterilin Universal container 30mL. Sterilin Universal container, RNase free, DNase free, human DNA free, Non-Pyrogenic, Printed, Graduated label, Aseptic, with self-standing conical base, Material: Polypropylene, 1/2 turn Quickstart cap for ease of handling, Maximum RCF: 9,500 x g, Capacity: 30mL

Sterilin Universal container 30mL. Sterilin Universal container, RNase free, DNase free, human DNA free, Non-Pyrogenic, Plain, Aseptic, with self-standing conical base, Material: Polypropylene, 1/2 turn Quickstart cap for ease of handling, Maximum RCF: 9,500 x g, 95kPa compliant, Capacity: 30mL

Sterilin Universal container 30mL. Sterilin Universal container, RNase free, DNase free, human DNA free, Non-Pyrogenic, Printed, Irradiated, Material: Polypropylene, with self-standing conical base, 1/2 turn Quickstart cap for ease of handling, Maximum RCF: 9500 xg, 95kPa compliant, Capacity: 30mL

Replacement set for pipette stand, two perforated plates/one drip pan. For up to 40 pipettes of different sizes, for all measuring and full pipettes up to a maximum diameter of 18 mm

Pipette stand 40 slots. Pipette stand, Material: Polypropylene, chrome-plated steel, Adjustable height up to 450 mm, with 40 slots, Diameter: 10 - 18 mm, Frame for pipettes with two rotating perforated plates and drip pan, for all measuring and full pipettes up to a maximum diameter of 18 mm

Polypropylene Insert 0.25mL. Insert, Material: Polypropylene, BM with Bottom Spring, for opening of Large opening screw thread, crimp top, Snap Seal, Snap ring and RAM vials containing a nominal I.D. Of 6mm, conical design permits complete sample removal, Size: 0.25mL

Polypropylene Insert 0.25mL. Insert, Material: Polypropylene, BM, No Spring, for opening of Large opening screw thread, crimp top, Snap Seal, Snap ring and RAM vials containing a nominal I.D. Of 6mm, conical design permits complete sample removal, Size: 0.25mL

Insert Polypropylene 0.1mL. Insert, Material: Polypropylene, LV with Bottom Spring, for opening of standard opening screw thread and standard opening crimp top vials containing a nominal I.D. Of 5mm, conical design permits complete sample removal, Size: 0.1mL

Insert Polypropylene 0.1mL. Insert, Material: Polypropylene, LV, No Spring, for opening of standard opening screw thread and standard opening crimp top vials containing a nominal I.D. Of 5mm, conical design permits complete sample removal, Size: 0.1mL

Vial, Material: Polypropylene, WISP, Limited Volume, GPI 13-425, Dimensions: 15x45mm, Size: 2.5mL.

Vial, Clear, Material: Glass, High Recovery, Large Opening, 12x32mm, 11mm Crimp, Size: 1.5 mL.

Vial, TPX, Material: Plastic, Dimensions: 12X32mmm, 11mm Crimp, Size: 0.75mL.

Vial, Snap Ring, Material: Polypropylene, Dimensions: 12X32mmm, 11mm Crimp, Size: 0.75mL.

Vial, TPX, Limited Volume, Large Opening, Screw Thread, 12x32mm, GPI 10-425, Size: 0.75mL.

Vial Polypropylene 0.75mL. Vial, Material: Polypropylene, Limited Volume, Large Opening, Screw Thread, Dimensions: 12x32mm, GPI 10-425, Size: 0.75mL

Vial, Amber Polypropylene, Limited Volume, Standard Opening, 12x32mm, 11mm Crimp, Size: 0.5mL.

Vial 0.3ml. Vial, color: Clear, With Marking Spot With Fused Insert, Snap Ring, Dimensions: 12X32mm, 11mm Crimp, volume: 0.3ml

Vial 0.5ml. Vial, material: Polypropylene, Limited Volume, Large Opening, Screw Thread, Dimensions: 12X32mm, Gpi 10-425, volume: 0.5ml

Vial, material: Polypropylene, Limited Volume, Ram, Dimensions: 12X32mm, 9mm Thread, volume: 0.5ml.

Vial 0.3ml. Vial, Glass Insert/Plastic Outside, Wisp, Limited Volume, Gpi 13-425, Dimension: 15X45mm, volume: 0.3ml

Vial 0.1 ml. Vial, Tpx, Plastic, Limited Volume, Standard Opening,Dimensions:12X32mm, 11Mm Crimp, volume: 0.1 ml

Vial 0.1 ml. Vial, material: Polypropylene, Plastic, Limited Volume, Standard Opening,Dimensions:12X32mm, 11Mm Crimp, volume: 0.1 ml

Vial 0.1 ml. Vial, Tpx, material: Polypropylene, Limited Volume, Ram,Dimensions:12X32mm, 9Mm Thread, volume: 0.1 ml

Vial, material: Polypropylene, Limited Volume, Ram, Dimensions:12X32mm, 9Mm Thread, volume: 0.1 ml.

Vial 0.1 ml. Vial, Tpx, Plastic, Limited Volume, Standard Opening,Dimensions:12X32mm, Gpi 8-425, volume: 0.1 ml

Vial 0.1 ml. Vial, material: Polypropylene, Limited Volume, Standard Opening, Dimensions:12X32mm, Gpi 8-425, volume: 0.1 ml

Mini Sampler. Size: 0.1mL. Ideal for retrieving small, specific volume samples of powders or similar materials. Use a separate spoon for each material sampled to avoid cross contamination. Molded of white high impact polystyrene. 25 per bag, 10 bags per case.

Mini Sampler. Size: 0.05mL. Ideal for retrieving small, specific volume samples of powders or similar materials. Use a separate spoon for each material sampled to avoid cross contamination. Molded of white high impact polystyrene. 25 per bag, 10 bags per case.

Needle-Type Tank Spigot, PP. Two Teflon O-rings for positive sealing. Only for NALGENE tanks up to 100 gals. with factory-welded threaded boss.

Polypropylene Bucket. Can be autoclaved or gas sterilized. Durable enough for handling photographic chemicals and most corrosive liquids. Nylon-coated wire bail handle. Do not sterilize with radiation or dry heat. Not suitable for strong alkalis. White. Capacity: 13.2L.

Polypropylene Bucket. Can be autoclaved or gas sterilized. Durable enough for handling photographic chemicals and most corrosive liquids. Nylon-coated wire bail handle. Do not sterilize with radiation or dry heat. Not suitable for strong alkalis. White. Capacity: 7.6L.

Incubation, Center Well. Polypropylene. Well is 10mm in diameter with capillary tubing attached and 70mm in length. Used for metabolic studies of biological materials. Particularly useful in measuring C14O2 yields following incubation.

Round Dipping Basket. HDPE fabricated dipping baskets are made with 1/8 thick walls, 3/16 diameter perforations on 5/16 centers. Takes 140 F on a continuous basis or more for shorter periods (up to 160 F). Supplied with sturdy swinging handle which allows easy storage and loading. 12x12.

Round Dipping Basket. Polypropylene fabricated dipping baskets withstands 180 F on a continuous basis or up to 200 F for shorter periods. Excellent chemical resistance. Supplied with swinging handle. Perforations 1/8 diameter on 21/64 center. 6 x 6.

Polypropylene Stirrers. Centrifugal blades. 100mm blade width fully extended. Blades are made of chemically resistant polypropylene and are fixed to a PVC-covered steel-steel rod that is 8mm diameter x 350mm long. Clockwise motion directs flow -upward. -

230mm HDPE Funnel. 230 mm inside I.D. funnel. Ideal for many applications in the laboratory and industry. Upper portion of funnel is straight sided to help prevent spill-over. Maximum temperature for-HDPE is 110 C. -

120mm HDPE Funnel. 120 mm inside I.D. funnel. Ideal for many applications in the laboratory and industry. Upper portion of funnel is straight sided to help prevent spill-over. Maximum temperature for-HDPE is 110 C. -

100mm HDPE Funnel. 100 mm inside I.D. funnel. Ideal for many applications in the laboratory and industry. Upper portion of funnel is straight sided to help prevent spill-over. Maximum temperature for-HDPE is 110 C. -

7.9Mm Connector Y-Type. Cs/72, Sp/12

Linear Porous Polyethylene Rod. Can withstand temperatures up to 93[degree]C (200[degree]F). Coarse grade porosity. 6 rods per size per case.

Fritware Porous Rod. Linear porous polyethylene withstands temperatures up to 93[degree]C. Coarse grade porosity. Diameter: 12.7mm. Length: 305mm.

TUBE, PP, THISTLE WITH STEM, 12/PKG, 72/CASE. The flared top thistle tube is made from polypropylene which is chemical resistant, unbreakable, and safe.

BOX, PS, 24 COMPARTMENT. Organize and Store 35mm Slides, Hardware, Corks, Stoppers and Lab Items Usually Lost In The Drawers Crystal-clear, styrene plastic affords full visibility of contents. A tight-fitting, hinged lid keeps objects contained.

HOLDER, PP, THERMOMETER, 3/PKG, 36/CASE. This convenient holder clips onto the edge of a beaker or other vessel and holds a thermometer vertically near the side of the container for safe, easy reading.

Flaskup Flask Holders. For 25ml flasks. Eliminates unwanted tilting of small, top-heavy flasks. Inside wall has a slight taper to the open bottom, allowing a variety of flask shapes to fit into one holder. Wide base allows easy handling and table top stability. Polypropylene. Autoclavable.

SAFE-LAB Teflon Stoppers, Hollow. Comes with polypropylene nut for easy removal from flask. Standard taper joint size: 24/40.

Polyethylene Tray. Low-density polyethylene. Rugged, long-lasting, and corrosion-resistant. Heavy walls and wide top flanges. Withstand temperatures up to 77[degree]C. With Scienceware needle-type polyethylene faucet with 12.7mm bore. Dimensions: 55Lx65Wx10.2cm.

Polyethylene Tray. Low-density polyethylene. Rugged, long-lasting, and corrosion-resistant. Heavy walls and wide top flanges. Withstand temperatures up to 77[degree]C. Dimensions: 40Lx60Wx15.2cm.

Flaskup Flask Holder. For 50mL flasks. Molded from glass-filled polypropylene. Durable and easy to clean. Inside wall has slight taper to open bottom. Wide base keeps flasks stable. Side slots can be used as sight windows. Autoclavable at 121[degree]C.

FLASKUP, FLASK HOLDER, PP, 100ML. Unique flask holders are molded from glass filled polypropylene, are durable and easy to clean.

FILLPOUR, FUNNEL, PP, LARGE, 10/PKG. This device reduces difficulties in handling dialysis bags.

FILLPOUR, FUNNEL, PP, SMALL, 10/PKG. This device reduces difficulties in handling dialysis bags.

Scintillation Vial Rack. Polypropylene. Holds 24 scintillation vials (30mm) for storage or preparation of cocktails. Autoclavable. Dimensions: 29.8Wx12.7Dx9.5Hcm. Shelf height: 4.4cm.

Nalgene Check Valve, High-Density Polyethylene, Thermo Scientific. Includes silicone diaphragm for prevention of back pressure, designed for use with -+ in. (6.35mm)- 5/16 in. (7.94mm) id tubing.

Autoclavable Tubing Clamp. Acetal clamp will not distort, rust or corrode, and features 15-position stepped control throttles that control flow from full open to complete closure. Clamp fits tubing from 3.2-11mm OD.

Nalgene Quick Disconnect Connectors, High-Density Polyethylene, Thermo Scientific. Provide fast, smooth connections, tabulations slide together snugly with a twist, allows for rapid joining or separation of apparatus lines.

Nalgene Quick Disconnect Connectors, High-Density Polyethylene, Thermo Scientific. Provide fast, smooth connections, tabulations slide together snugly with a twist, allows for rapid joining or separation of apparatus lines.

Fitting, Sanitary, Sani-Tech Adapter 1 inch Tri Clamp, PP, non sterile.

Nalgene Mini Hose Barb Connectors; Pp, Thermo Scientific. Allow connections between 0.75 in sanitary fitting to flexible tubing of 0.375 in. comes with an inner diameter of 3/8in. or -+ in.

Nalgene Valved, Barbed, Quick-Disconnect Fitting, Thermo Scientific. Fluid flow stops when fitting halves are separated, designed for one-handed quick disconnect with flexible tubing, leak proof connection between two tubes

Nalgene Valved, Barbed, Quick-Disconnect Fitting, Thermo Scientific. Fluid flow stops when fitting halves are separated, designed for one-handed quick disconnect with flexible tubing, leak proof connection between two tubes

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

Nalgene Tubing Connectors, Polypropylene, Thermo Scientific. Resin free of animal derived components, non-tapered hose barbs maximize liquid flow, double bagged to maintain cleanliness, autoclavable, connectors are resistant to gases.

SCIENCEWARE Cover. For Sterilizing Tray, model 62662-401. Fits outside tray rim (25.4mm skirt); 3.2mm thick. Steam autoclavable at 121[degree]C.

Nalgene Pans, High-Density Polyethylene, Thermo Scientific. Rugged, durable pans tapered for nesting, without covers, used for soaking labware or used for ice baths, tapered for nesting, chemically resistant to most acids, bases and alcohols.

Nalgene Pans, High-Density Polyethylene, Thermo Scientific. Rugged, durable pans tapered for nesting, without covers, used for soaking labware or used for ice baths, tapered for nesting, chemically resistant to most acids, bases and alcohols.

Nalgene Instrument/Pipet Sterilizing Pan, Filled Polypropylene, Thermo Scientific. Horizontal design allows pipets to be fully immersed in disinfectant, has groove for cover to minimize spillage of hazardous materials and a hand grip on the cover.

SCIENCEWARE Cover. For Sterilizing Tray, model 62662-445. Fits outside tray rim (25.4mm skirt); 3.2mm thick. Steam autoclavable at 121[degree]C.

SCIENCEWARE Cover. For Sterilizing Tray, model 62662-423. Fits outside tray rim (25.4mm skirt); 3.2mm thick. Steam autoclavable at 121[degree]C.

Nalgene Pans, Polypropylene, Thermo Scientific. Pans are tapered for nesting to save space, rolled edges provide extra stiffness for carrying heavy contents, heavy wall construction will withstand rugged use and repeated autoclaving, autoclavable

Nalgene Pans, Polypropylene, Thermo Scientific. Pans are tapered for nesting to save space, rolled edges provide extra stiffness for carrying heavy contents, heavy wall construction will withstand rugged use and repeated autoclaving, autoclavable

Nalgene Pans, Polypropylene, Thermo Scientific. Pans are tapered for nesting to save space, rolled edges provide extra stiffness for carrying heavy contents, heavy wall construction will withstand rugged use and repeated autoclaving, autoclavable

Nalgene Pans, Polypropylene, Thermo Scientific. Pans are tapered for nesting to save space, rolled edges provide extra stiffness for carrying heavy contents, heavy wall construction will withstand rugged use and repeated autoclaving, autoclavable

Nalgene Sterilizing Pans, Polypropylene, Thermo Scientific. Useful for drying and sterilizing instruments and labware, for collecting and washing soiled lab equipment, rolled edges for extra stiffness, handles for easy carrying, tapered for nesting, autoclavalbe.

Nalgene Sterilizing Pans, Polypropylene, Thermo Scientific. Useful for drying and sterilizing instruments and labware, for collecting and washing soiled lab equipment, rolled edges for extra stiffness, handles for easy carrying, tapered for nesting, autoclavalbe.

SCIENCEWARE Electrophoresis Plate Rack. A-shaped rack stores glass plates of various sizes. Reinforced bars. Three wide slots for double plates and 7 slots for single plates. Epoxy-coated, durable steel rack holds heavy plates securely. Rubber pads on the bottom of the rack eliminate sliding.

Polypropylene Rack. Stackable, three-tier rack. Rows are numbered and lettered for easy sample identification. Lower plate has rounded wells with drain holes. Rack features hand grips on end plates. 32 places. Dimensions: 21Lx11Wcm. For tube O.D. 16-20mm. Height: 12.7cm. Clear.

Nalgene Autoclaving Baskets, Polypropylene, Thermo Scientific. Baskets hold labware during autoclaving and washing, allow complete venting and draining, smooth surface will not scratch plastic or glass, white polypropylene will not rust

Nalgene Autoclaving Baskets, Polypropylene, Thermo Scientific. Baskets hold labware during autoclaving and washing, allow complete venting and draining, smooth surface will not scratch plastic or glass, white polypropylene will not rust

Polypropylene Basket. Feature a sturdy, one-piece molded construction. Secure fitting polypropylene lid holds tubes during rinse or automatic washing. Steam autoclavable at 121[degree]C. Dimensions: 23Lx23Dx23Hcm.

Polypropylene Basket. Features a sturdy, one-piece molded construction. Secure fitting polypropylene lid holds tubes during rinse or automatic washing. Steam autoclavable at 121[degree]C. Dimensions: 15Lx15Dx15Hcm.

Polypropylene Basket. Features a sturdy, one-piece molded construction. Secure fitting polypropylene lid holds tubes during rinse or automatic washing. Steam autoclavable at 121[degree]C. Dimensions: 12.7Lx10Dx10Hcm.

Polypropylene Basket. Features a sturdy, one-piece molded construction. Can be autoclaved at 121[degree]C for sterilizing test or culture tubes. Will not rust or corrode. Sides tapered for nesting of multiple baskets when stored. Without lid. Dimensions: 23Lx23Dx23Hcm.

Polypropylene Basket. Features a sturdy, one-piece molded construction. Can be autoclaved at 121[degree]C for sterilizing test or culture tubes. Will not rust or corrode. Sides tapered for nesting of multiple baskets when stored. Without lid. Dimensions: 15Lx15Dx15Hcm.

KIM-KAP Polypropylene Cap. Disposable. Serve as a closure for KIM-RAK culture tube systems or other culture tubes of comparable sizes. Autoclavable. For tube OD 20mm. Natural.

Rectangular Support. Cast iron base, black enamel finish, plated steel rod. Bore size: 127x203mm. Rod size: 10mmx50.8cm.

CLAMP JOINT PLASTIC 45/50 - CS004550

[ST] Joint Clips, Kemtech America - CS002942, Plastic Joint Clip

[ST] Joint Clips, Kemtech America - CS001922, Plastic Joint Clip

[ST] Joint Clips, Kemtech America - CS001420, Plastic Joint Clip

Stirring Rod, Polypropylene. Length: 203mm. O.D.: 4.7mm. Steam autoclavable at 121[degree]C.

Nalgene Stirring Rod, Polypropylene, Thermo Scientific. Provides functionality of both a stir rod and a rubber policeman in one convenient tool, autoclavable, chemically compatible with a wide range of lab reagents.

Spatula, Micro, Stainless Steel, Glazed Finish. With curved, square-cut, sharpened tip 0.3cm wide at one end; rounded spoon at the other end. Overall length: 16.5cm.

Scoops, Polypropylene. Molded, one-piece construction with smooth finish. 20.3Lx12.1Wcm.

Scoops, Polypropylene. Molded, one-piece construction with smooth finish. 12.7Lx5.1Wcm.

Scoops, Polypropylene. Molded, one-piece construction with smooth finish. 8.9Lx3.81Wcm.

Nalgene Safety Half-Liter Bottle Carriers, Thermo Scientific. Easily and safely holds up to six standard half-liter reagent bottles in any profile, can be used to carry most other half-liter glass or plastic bottles, snug-fitting cover latches securely to base

VWR Acid Bottle Carrier. Pour-through opening permits safe pouring without removing lid. 2.37L capacity. Made of chemical-resistant polyethylene. Unique domed lid provides impact protection. Made to hold standard U.S. 2.36L reagent bottles having maximum diameter of 12.7cm.

Tubing Sinker. Fluoropolymer sinker keep tubing at bottom of container. Ideal for use with pumps and dispensers. With hose barb ends for simple tubing connection. Solvent-resistant and autoclavable. Autoclavable. Fits tubing size I.D. 4.7mm to 6mm.

DuraSharp® Shears for DuraSeal® Sealing Film, Diversified Biotech - DSH-100, DuraSharp® Shears

Spoon, mini sampler, .50ml, Avoid cross contamination by using a different spoon for each sample. .10, .50 and 1.0 ml models have a rounded bowl for easier emptying of the spoon and a thinner neck that minimizes extra material collection

Wash Bottle Carrier, blue, polythene, Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions, Labeled with bold, eye-catching letters for safe and positive identification of common laboratory solutions

STAND, PP, PIPETTE SUPPORT. For safe and orderly storage of up to 28 pipettes, this polypropylene stand holds pipettes in a vertical position.

Polypropylene Tray. Steam autoclavable and offers resistance to temperatures up to 135[degree]C. Dimensions: 45.7Lx45.7Wx10.2Dcm.

Large Polypropylene Funnel. Size: 350mm. With handles are ideal for filling drums, barrels, tanks and carboys providing ample volume and fast flow. Molded natural polypropylene funnels are autoclavable at 121[degree]C.

Tabletop Buchner Funnel. With perforated removable plate. Made of high density polyethylene 6.4mm thick with non-porous ring at periphery of plate which seals filter paper when used. 260mm inside diameter, 178mm overall height, 127mm rim to plate.

Tabletop Buchner Funnel. With medium porosity removable plate. Made of high density polyethylene 6.4mm thick with non-porous ring at periphery of plate which seals filter paper when used. 914mm inside diameter, 375mm overall height, 375mm rim to plate.

Tabletop Buchner Funnel. With medium porosity removable plate. Made of high density polyethylene 6.4mm thick with non-porous ring at periphery of plate which seals filter paper when used. 457mm inside diameter, 292mm overall height, 229mm rim to plate.

Tabletop Buchner Funnel. With medium porosity fixed plate. Made of high density polyethylene 6.4mm thick with non-porous ring at periphery of plate which seals filter paper when used. 457mm inside diameter, 292mm overall height, 229mm rim to plate.

Buchner Funnel. Size: 26cm. With fixed or removable perforated filter plate.

Tabletop Buchner Funnel. With coarse porosity removable plate. Made of high density polyethylene 6.4mm thick with non-porous ring at periphery of plate which seals filter paper when used. 260mm inside diameter, 178mm overall height, 127mm rim to plate.

Poxygrid 50mL Centrifuge Tube Rack. Formed of steel wire with epoxy coating and supports conical bottom of tube as well as a half height location. Convenient to grip and move. Dimensions: 76Wx64Hmm.

Drying Tube with Tube Fittings. Unbreakable polyethylene straight tubes, 16mm I.D. x 19mm O.D. (5/8x 3/4). Each tube is supplied with two polypropylene fittings which accept 6.4 to 9.5mm (1/4 to 3/8) I.D. tubing. Drying agent not included.

Three-Way White Stopcock. Bore size: 8mm. Accepts 10mm tubing I.D. PVDF (polyvinylidene fluoride) is a fluoroplastic resistant to most chemicals and withstands temperatures up to 204[degree]C. Serrated tubulations accept rubber or plastic tubing. Maximum pressure rating: 5psi.

Eisco Polypropylene Graduated Cylinders with Hexogonal Base, Class B - FSC1043, 2000 ml

Eisco Polypropylene Graduated Cylinders with Hexogonal Base, Class B - FSC1042, 1000 ml

Eisco Polypropylene Graduated Cylinders with Hexogonal Base, Class B - FSC1041, 500 ml

Eisco Polypropylene Graduated Cylinders with Hexogonal Base, Class B - FSC1040, 250 ml

Eisco Polypropylene Graduated Cylinders with Hexogonal Base, Class B - FSC1039, 100 ml

Eisco Polypropylene Graduated Cylinders with Hexogonal Base, Class B - FSC1038, 50 ml

Eisco Polypropylene Graduated Cylinders with Hexogonal Base, Class B - FSC1037, 25 ml

Eisco Polypropylene Graduated Cylinders with Hexogonal Base, Class B - FSC1036, 10 ml

Bottle Soda Preform With Cap. Sturdy and thick walled plastic test tube with cap is made from soda bottle material, ensures a durable test tube with a tightly screwed cap, to maximize lab use and minimize leaks. Total length is 126mm, inner diameter is 22mm, and outer diameter is 24mm.

Bottle Wide Neck Pp Reagent Rigid 1000Ml. Bottle Reagent, Polypropylene, wide neck, rigid can be autoclaved leak proof, suitable for universities and industrial laboratories, Capacity: 1000 ml.

Bottle Wideneck Polypropylene Rgnt 500Ml. Bottle Reagent, Polypropylene, wide neck, rigid can be autoclaved leak proof, suitable for universities and industrial laboratories, Capacity: 500 ml.

Bottle Wideneck Polypropylene Rgnt 250Ml. Bottle Reagent, Polypropylene, wide neck, rigid can be autoclaved leak proof, suitable for universities and industrial laboratories, Capacity: 250 ml.

Bottle Wideneck Polypropylene Rgnt 125Ml. Bottle Reagent, Polypropylene, wide neck, rigid can be autoclaved leak proof, suitable for universities and industrial laboratories, Capacity: 125 ml.

Bottle Wide Neck Polypropylene Rgnt 60Ml. Bottle Reagent, Polypropylene, wide neck, rigid can be autoclaved leak proof, suitable for universities and industrial laboratories, Capacity: 60 ml.

Bottle Wide Neck Polypropylene Rgnt 30Ml. Bottle Reagent, Polypropylene, wide neck, rigid can be autoclaved leak proof, suitable for universities and industrial laboratories, Capacity: 30 ml.

Lid, Omni, Color: Clear, Size: 6.3quart.

Funnel 64oz. Funnel, Stackable, dishwasher safe, Side ribbing lets air escape when pouring, Top diameter: 8.12in, Full height: 8.00in, Stem height: 1.83in, Bottom diameter: 0.780in, 8IN Outer Diameter, Material: polyethylene, Size: 64oz

Displacement Vessel, Material: Polypropylene, Medium, with spout, for specific gravity experiment, Size: 250ml

Specific Gravity Balls Set - 47346-00, Specific Gravity Balls Set

Polypropylene Powder Funnels, Powder Funnel, Polypropylene, 80 mm diameter, Scienceware

Small Polypropylene Utility Funnels, Hutzler - 802, Small Utility Funnels, Polypropylene, 60mm diam.

Economy Short Stem Funnels, Hutzler - 804, Economy Short Stem Funnels, Top ID, mm: 83, Stem Length, mm: 24

Small Polypropylene Utility Funnels, Hutzler - 808, Small Utility Funnels, Polypropylene, 110mm diam.

Plastic Funnels - 2209-04

Plastic Funnels - 2209-03

Plastic Funnels - 2209-02

Polyvinyl Bakelite Jar Caps - 87A003A89, Bakelite Jar Caps, 89mm, Polyvinyl Liner

70MM BAKELITE JAR CAP PE LINER - CAP-00313

Cap Black Phenolic for Bakelite Jar. Cap, Style: Solid Polyethylene Lined for maximum resistance, Color: Black, Material: Phenolic, Neck Finish: 58-400 mm for Bakelite Jar

48MM BAKELITE JAR CAP PE LINED - CAP-00267

33MM BAKELITE JAR CPVNYL CTD PULP LINER - CAP-00216

Large Utility Funnels, Hutzler - 832-WN, Large Utility Funnels, Pack of 6

Thistle Tube Polypropylene Funnel, Bel-Art - F14751-0000_SE, Thistle Tube Polypropylene Funnel

White Metal Jar Caps - 87A001C70A, White Metal Jar Caps, 70 mm

Funnel Support - 45103, Funnel Support

FUNNEL BUCHNER POLYPROPYLENE 165 ML - 57105

Polypropylene Buchner Funnel - 57105-PK/12, Polypropylene Buchner Funnel

Y-Shaped Connectors - 222565, Polypropylene Y Connectors, Fits 1/4 IN. Tubing

Straight Connector - 227245, Straight Connector

Polypropylene Funnels, Dynalon - 412334-0002, Funnel, Poly, 114 mL (4 oz)

Economy Polypropylene Funnels, Maryland Plastics - L1000, Economy Funnels, Polypropylene, 58mm diam.0

Economy Polypropylene Funnels, Maryland Plastics - L-1010, Economy Funnels, Polypropylene, 67mm diam.0

Polypropylene Separatory Funnels, 500 ml

Polypropylene Separatory Funnels, 250 ml

Clear Plastic Bowls - 366, Snap Lids for Clear Plastic Bowls

Funnel Set, Dynalon - 241645-0SET, Funnel Set

Polypropylene Short Stem Funnels, 60°, Bel-Art - F14676-0055, 32.8 ml

Polypropylene Separatory Funnels - 81201, 100 ml

SP Bel-Art Wash Bottle Carrier, Bel-Art Products, a part of SP - F11640-0001_SE, Six Place Wash Bottle Carrier

Container, Plastic - 291, -, Deli container with lid, Package of 24

Student Plasticware Set - CHK10051, Student Plasticware Set

Funnel Sets, Rochester - WARD470014-960, Funnel Set, Large, HDPE, Set of Three

Convenience Items - WARD470006-568, Utility Pail

Convenience Items - WARD470006-566, Utility Pail

Economy Vacuum Plate - 7-203-4, Plate, Economy Vacuum

Cups - 2046400, 8 oz., Measuring cup

Polystyrene Spot Plate - WARD470002-082, Polystyrene Spot Plate

Vwr Funnel Disp Ps 55Mm Cs100. Polystyrene Disposable Funnel. For Use With 11Mm Dia. Paper. Tapered At A 60 Degree Angle With Inside Fluting. Top I.D.: 55Mm. Height: 71.5Mm. Stem Length: 27Mm. Stem Opening: 4.3Mm.

NALGENE Pipet Jar. Cross-linked high-density polyethylene pipet jar with dust cover. Resists stress cracking. Flanged base for stability. Diameter x Height: 17.5x91.4cm. For maximum pipet length, 81cm. Caution: See jar label for details regarding use of concentrated sulfuric acid.

NALGENE Pipet Jar. Cross-linked high density polyethylene pipet jar with dust cover. Resists stress cracking. Flanged base for stability. Diameter x Height: 16.5x68.6cm. For maximum pipet length, 61cm. Caution: See jar label for details regarding use of concentrated sulfuric acid.

NALGENE Pipet Jar. Cross-linked high-density polyethylene pipet jar with dust cover. Resists stress cracking. Flanged base for stability. Diameter x Height: 16.5x51.4cm. For maximum pipet length, 41cm. Caution: See jar label for details regarding use of concentrated sulfuric acid.

Eco-Funnel. N/A thread size. For 7.6 and 18.9L Justrite waste containers.

Pot 6In Diam Pfa 2.4L. All PFA construction,, High purity PFA, Excellent Chemical Resistance, Flat bottom for direct use on hotplate, Temperature range -200 C to 200 C

Funnel Pfa 80Ml. High purity PFA, One-piece construction, Use for ultrapure liquid transfer, Translucent, Temperature range -200 C to 200 C

Funnel Pfa 40Ml. High purity PFA, One-piece construction, Use for ultrapure liquid transfer, Translucent, Temperature range -200 C to 200 C

Utility Funnels, Dynalon - 412334-0003, 4 oz.

FUNNEL, PP, BUCHNER, 875ML, 1/PKG, 6/CASE. Easy to clean two-piece, polypropylene Buchner funnels with perforated filter plate. Lightweight, but not top-heavy. Steam autoclavable at 121[degree] C (250[degree] F).

Spigot Closure, PP/TPE. Fits all NALGENE carboys with spigot and selected NALGENE tanks with spigot; use in place of Cat. No. 6422 to provide leakproof seal when autoclaving liquids in a carboy. Also useful when handling could damage or accidentally turn on spigot.

Needle-Type Spigot, LDPE. For safe, efficient dispensing from tanks. Ensure tank and spigot have compatible chemical resistance before installation. Teflon O-ring ensures positive sealing.

Settlometer Jar With Cover, PC For cat#1010-0507.

Spectra/Por Biotech Cellulose Ester(CE) Dialysis Membranes, 100000 MWCO, 10 mm. 10 mm. An Ultra High Purity and Precise Separation Dialysis Membrane. Vol/Length (ml/cm): 0.32. Dia. (mm): 6.4. Fourteen precise MWCOs ranging from 100 Daltons to 1 million Daltons.

Cube Insert for Cubitainer. 10L. Blend of linear low and low density polyethylene manufactured in a cube shape. Designed for use with a corrugated fiberboard overpack. Collapses as product is dispensed. Non-glug design assures product flows from in continuous, uninterrupted stream.

Hand Scraper, Polypropylene. Scraper is ideal for countertops, walls, and floors, and will not scratch stainless steel surfaces. Scraper is unaffected by water, acids, solvents, and sanitizers. FDA and USDA approved. Sterilizable. Width is 11cm. Length is 24.8cm.

Drying Tubes with Fittings. Unbreakable polyethylene straight tubes, 16mm I.D. x 19mm O.D. (5/8x 3/4). Each tube is supplied with two polypropylene fittings which accept 6.4 to 9.5mm (1/4 to 3/8) I.D. tubing. Drying agent not included.

Nalgene Air-Tight Pails, Low-Density Polyethylene, Thermo Scientific. Close fitting, airtight covers make these pails useful for specimens, storage and general utility, handle is a nylon-coated wire bail, lids are white

Nalgene Air-Tight Pails, Low-Density Polyethylene, Thermo Scientific. Close fitting, airtight covers make these pails useful for specimens, storage and general utility, handle is a nylon-coated wire bail, lids are white

Nalgene Graduated Bucket, White High-Density Polyethylene, Thermo Scientific. Extra heavy, molded, polyethylene coated, bail handle and wide-lipped pour spout for easy handling and pouring, graduated in pints and liters.

Polypropylene Bucket. Can be autoclaved or gas sterilized. Durable enough for handling photographic chemicals and most corrosive liquids. Nylon-coated wire bail handle. Do not sterilize with radiation or dry heat. Not suitable for strong alkalis. White. Capacity 10L.

VWR Wash Bottle Carrier. Sturdy, lightweight polypropylene carrier holds up to six wash bottles. Its secure handle provides comfort and control. Autoclavable and chemical-resistant. Holds both 237mL and 473mL bottles. Dimensions: 28.6Lx19.4Wx22.5Hcm.

Covers. Nonsterile. For SCIENCEWARE 96-Well Plates, Deepwell. Polypropylene. Designed for serial dilution procedures. Can separate each well with a sealing ring, reducing cross-contamination. Feature a standard footprint. Compatible with robotic work stations.

Snap Cap, Polyethylene. Size: 5. Replacement for 200, 250, and 500mL KIMAX volumetric flasks.

Nalgene Barbed Bulkhead Fittings, Thermo Scientific. Promote the customization of most nalgene bottles and carboy closures for aseptic transfer of liquids, includes a set of 2 panel mount barbed fittings, kits include instructions and templates, and polypropylene fittings.

Poxygrid, RACK, B.O.D.BOTTLE. These racks have 12 places (3 x 4 rows) for 300 ml Biological ottles.

Nalgene Polypropylene Filling/Venting Closures, Thermo Scientific. Ready to accept additional fluid transfer components such as aseptic connectors and air vent filters, closures are specifically designed to mate with most nalgene bottles and carboys, leakproof systems for secure.

Laboratory Carrier, HDPE, non sterile. Reduces breakage and spillage when transporting glass and plastic bottles. Two foam inserts with six holes (consisting of removable circular sleeves) keep bottles separated. Remove concentric foam sleeves to accommodate up to six bottles with 2-3/8-in.

NALGENE Square Media Bottles, PETG, Sterile, Graduated. 60mL. Graduated Range: 10-60mL. Interval: 10mL. Transparency and reduced permeability to CO2/O2 allow media storage up to 6 months. Bottle and cap are radiation sterilized. 24mm cap included. Not autoclavable.

NALGENE Large Square Bottle, Polypropylene, Wide Mouth. 4L bottle is ideal for storing and sterilizing contaminated slides and other small lab items. Bottle features molded-in handgrips and comes with a 100mm polypropylene cap. Not leakproof. Autoclavable.

RACK, PP, ROUND FLOATING, 20PLACES, WHITE, 4/PKG. Even when fully loaded, tubes are completely immersed while tops rest above the rack, floating in a beaker of water.

Y Connector. Autoclavable, polypropylene. 4.7mm (3/16).

Y Connector. Length: 8mm (5/16). Autoclavable, polypropylene. 12 per bag. 6 bags per case.

Y Connector. Length: 9.5mm (3/8). Autoclavable, polypropylene. 12 per bag. 6 bags per case.

Y Connector. Length: 12.7mm (1/2). Autoclavable, polypropylene. 12 per bag. 6 bags per case.

SPILL TRAY POLYPROPYLENE 37L - CG-1988-03

SPILL TRAY POLYPROPYLENE 37L - CG-1988-02

SPILL TRAY POLYPROPYLENE 6L - CG-1988-01

Round Polypropylene Tray. 25.4cm diameter, 7.6cm depth. Heavy-walled 4.8mm. Corrosion-resistant and autoclavable.

PADDLE, HDPE, STIRRING, 3'HANDLE. For mixing liquids in large vats and tanks, these larger HDPE paddles are 76x152mm (3x6) with 25mm (1) diameter handles. With 91cm (3 ft) handle.

SCRAPER, NYLON, RIGID. Molded of glass-reinforced polyimid nylon, scraper is 63mm (2-7/16) wide with a 140mm (5-1/2) long flat blade. The straight, chisel-type 63mm wide scraping edge may be resharpened. Overall length is 286 mm (11-1/4).

Rectangular Polyethylene Bottle Carrier. For 8 bottles. Without partitions. Measures 36x18x15cm deep inside with 25.4mm diameter handle.

SCOOP, PP, 6/PKG, 24/CASE. Rectangular shape molded of rigid polypropylene.

RACK, PP, ROUND FLOATING, 8PLACES, WHITE, 4/PKG. Even when fully loaded, tubes are completely immersed while tops rest above the rack, floating in a beaker of water.

TRAY, LDPE, 21-1/2X25-1/2X4, WITH FAUCET. Molded low-density polyethylene trays are rugged, long-lasting, and corrosion-resistant.

FLASKUP, FLASK HOLDER, PP, 500ML. Unique flask holders are molded from glass filled polypropylene, are durable and easy to clean.

CLAMP, PP, BURETTE, SINGLE. These non-corroding, polypropylene burette clamps do not obscure graduations. Burette is held firmly in place by rubber pads and a concealed steel spring. Center clamp tightens to a standard support rod; 12.5mm (1/2) and 9.5mm (3/8) bushings included. 12 per case.

FLASKUP, FLASK HOLDER, PP, 250ML. Unique flask holders are molded from glass filled polypropylene, are durable and easy to clean.

Spatula. VWR Spatula, standard, disposable, sterile, Material: Polypropylene, Length: 210 mm, Color: Opaque, Ethylene Oxide Sterilized, endotoxin Free/Non-Pyrogenic

Burette. Splinter-proof titrating burette, made of borosilicate glass 3.3, Shatter-proof, resistant to chemicals, Sturdy stand, Precise discharge jet, allowing very fine drops. Burette capacity: 25 ml, Division: 0.05 ml, Precision: +/- 0, 045 ml, Height: 65 cm, Capacity: 1 l

Burette. Splinter-proof titrating burette, made of borosilicate glass 3.3, Shatter-proof, resistant to chemicals, Sturdy stand, Precise discharge jet, allowing very fine drops. Burette capacity: 15 ml, Division: 0.1 ml, Precision: +/-0, 045 ml, Height: 52 cm, Capacity: 0.5 l

Test Tube, 12 x 86mm (5mL), PS, with Rim, Polystyrene tubes can withstand 1500 RPM during centrifugation

Adapter set. LaboPlast adapter set, Includes: Thread adapter 3/4in, Thread adapter 3/4in - Kautex, Thread adapter 3/4in - cylindrical R 3/4in barrel thread, Thread adapter 3/4in - conical R 3/4in barrel thread, Hexagonal key for thread adapter, All adapters have a standard outer thread R 3/4in

Analytical Funnel PP 25mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 80mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids,

Funnel Analytical PP 100mm cs10. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel, Analytical PP 150mm cs5. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 120mm cs10. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 180mm cs5. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Powder PP 60mm cs20. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids, External ribbing is molded into the funnel to prevent air lock

Funnel Powder Pp 80mm cs20. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder PP 100mm cs20. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder PP 120mm cs10. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder Pp 150mm cs10. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder PP 180mm cs5. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Analytical PP 35mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 50mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 65mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Polyester drain discs, 22 mm, PE, 100/pk. For use with membrane hardware where extra support is needed for improved flow rate and throughput. Binder free.

Polyester drain discs, 37 mm, PE, 100/pk. For use with membrane hardware where extra support is needed for improved flow rate and throughput. Binder free.

Double sided carbon tape. 8mm.

Septum, GL14 cap, silicone/PTFE, pk/10.

Septum, GL25 cap, silicone/PTFE, pk/10.

Septum, GL18 cap, silicone/PTFE, pk/10.

Septum, GL32 cap, silicone/PTFE, pk/10.

DuraSeal® Sealing Film, Diversified Biotech - DS12-250, Sealing Film

Polyethylene Molds - Individual - 19 x13 mm. These individual polyethylene molds can be used with EBH2 Block Holders and are suitable for JB-4, JB-4-Plus, Immuno-Bed, LR White, LR Gold or Paraffin embedding. 100 per pack

Disposable smartspatulas, Standard blue, 210mm, Pack of 300, Polypropylene.

Disposable smartspatulas, Macro, Green, 310mm, Pack of 150, Polypropylene.

LaboPlast® Stopcock, Bürkle - 0525-7000, Stopcock Straight- Through

LaboPlast® Stopcock, Bürkle - 0525-5000, Stopcock Straight- Through

LaboPlast® Stopcock, Bürkle - 0525-3000, Stopcock Straight- Through

Accessories for Zone Samplers, Bürkle - 5317-0033, Emptying funnel, separate, V2A

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1050, 50 ml

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1025, 25 ml

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1015, 15 ml

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1010, 10 ml

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1005, 5 ml

Benchtop Draining Racks, Bürkle - 9640-3050, Flexible, PVC, with PP rods

Benchtop Draining Racks, Bürkle - 9640-3040, Flexible, PVC, with PP rods

Wall Mounted Draining Racks, Bürkle - 9640-1050, With 10 rods, 39 rods, 4 rods

Wall Mounted Draining Racks, Bürkle - 9640-1040, With 5 rods, 26 rods, 2 rods

Accessories for Draining Racks, Bürkle - 9640-0421, Rods, PP

Accessories for Draining Racks, Bürkle - 9640-0415, Rods, PP

Accessories for Draining Racks, Bürkle - 9640-0410, Rods, PP

Drum Pumps, Bürkle - 5600-0801

Poxygrid, TUBE HOLDER, SINGLE, 50ML. This holder solves the problem of where to put a single 50ml conical tube where it will not roll or spill.

Acrylic tray for lab supplies - 1/4 inch, clear acrylic 18w x 8h x 15d.

Acrylic tray for lab supplies-1/4inch clear acrylic 12w x 6.5h x 10d.

Category