• 0
Shop Products $

Homogenizer, Polytron PT2500E. 230V, Benchtop homogenizer, drive unit only, powerful 500W motor with LED display, 500 - 30,000 RPM, quick coupling accommodates generators sizes 3,5,7,12,20 mm for volumes from 0.05 -2000 ml

Homogenizer, Polytron PT2500E. 115V, Benchtop homogenizer, drive unit only, powerful 500W motor with LED display, 500 - 30,000 RPM, quick coupling accommodates generators sizes 3,5,7,12,20 mm for volumes from 0.05 -2000 ml

Homogenizer, Polytron, Pt 10-35 Gt. Benchtop Pkg: Homogenizer, Stand, Vessel Holder. Low-Noise, 30,000 Rpm, Generators 5 ++ 36 Mm, Volume 0.1 To 4000 Ml, 115V, 60Hz. Connect Gens. F/ Pt3000/Pt3100(D); Pta Gens. Require Pt-Da/Pta Adapter

Homogenizer, Polytron, Pt 10-35 Gt. Benchtop Drive Unit, High-Power, Low-Noise, 30,000 Rpm, F/ Generators 5 ++ 36 Mm, Volume 0.1 To 4000 Ml, 115V, 60Hz. Connect All Generators For Pt3000/Pt3100(D). Pta Gens. Require Pt-Da/Pta Adapter

Homogenizer, Polytron, Pt 3100D, Benchtop Pkg Unit. Includes: Sturdy H-Stand (Pt-St 3001) Benchtop Programmable 1200W Constant-Speed Motor, Rs-232, Cable, Software For Pc, 30,000 Rpm, Generators 5 ++ 36 Mm, Volume 0.1 To 4000 Ml, 115V, 60Hz.

12 mm Generator. for PT1600E with easy disassembly for easy cleaning with W style Teeth. W - Efficient shredding of difficult-toprocess samples (i.e., tough, brittle, fibrous, sticky or gummy).

12 mm Generator. for PT1600E with easy disassembly for easy cleaning.

Homogenizer Ika T50 Digital 230V.

Homogenizer Ika T50 Digital 115V.

Homogenizer Ika T25 Digital 230V.

Homogenizer Ika T18 Digital 230V.

Homogenizer Ika T18 Digital 115V.

Homogenizer Ika T10 Basic 230V.

Flexiroll Cell Roller System. Includes: Power Supply And Adaptor 6 Roller Rods Remote Digital Controller 20 O-Rings For 15Ml Tubes 20 O-Rings For 50-Ml Tubes. Holds Three Roller Bottles And Can Spin From .5 To 80 Rpm Or Spin 20 15Ml Or 50 Ml Tubes. The Temp Range Is From 4-60 Degrees C: 220 V

Stirring tube. For use with the IKA ULTRA-TURRAX Tube Drive Volume: 5 - 15 ml Packing unit: 25 pack

Dispersing tubes. For use with the IKA ULTRA-TURRAX Tube Drive Volume: 5 - 15 ml Packing unit: 25 pack

Homogenizer Motor Drives, Glas-Col® - 099CK54, Homogenizer motor/control/chuck/90-degree clamp

Plate Stand. R1827 For use with ULTRA-TURRAX T18 and T25 disperser/homogenizers. Dimensions: 20Wx31.6Dx100Hcm. Maximum load: 5kg. Supporting rod: 16mm diameter. Slip-resistant foil. Use with boss head clamp 33994-088.

BEAD HOMOGENIZER 24 PLACE

BEAD HOMOGENIZER REFRIG 24 PLACE

TUBE HOLDER OPTIONAL 12X5ML TUBES - D2400-R5V2-VW

TUBES PREFILD 2ML SILICA/ZIRCON MIX PK50 - D1034-MX-VW

TUBES PREFILLED 5ML ZIRCONIUM 3MM PK50 - D1034-30-VW

TUBES PREFILLED 5ML SS 3MM PK50 - D1034-28-VW

TUBES PREFILLED 5ML ZIRCONIUM 0.5MM PK50 - D1034-05-VW

TUBES PREFILD 2ML GARNET/6MM BALL PK50 - D1033-30G-VW

TUBES PREFILLED 2ML SS 3MM PK50 - D1033-28-VW

TUBES PREFILLED 2ML ZIRCONIUM 3MM PK50 - D1032-30-VW

TUBES PREFILLED 2ML ZIRCONIUM 1.5MM PK50 - D1032-15-VW

TUBES PREFILLED 2ML ZIRCONIUM 1.0MM PK50 - D1032-10-VW

TUBES PREFILLED 2ML ZIRCONIUM 0.5MM PK50 - D1032-05-VW

TUBES PREFILLED 2ML ZIRCONIUM 0.1MM PK50 - D1032-01-VW

TUBES PREFILD 2ML GLASS BEADS 0.5MM PK50 - D1031-05-VW

TUBES PREFILD 2ML GLASS BEADS 0.1MM PK50 - D1031-01-VW

BEAD HOMOGENIZER 6 PLACE

HOMOGENIZER OMNI BEAD RUPTOR 24 - 19-070

HOLDER TUBES 30X50ML HOMOGENIZER HI CAP - 2014

DISPERSER SYSTEM DIGITA OV 625 115V 60HZ - SA20910470

DISPERSER DIGITAL OV 625 115V 60HZ - F20910470

DISPERSING TOOL D20 S25F P R25E - A00000480

DISPERSING TOOL D20 S25C P R25C - A00000479

DISPERSING TOOL D20 S20C P R20S - A00000478

DISPERSING TOOL D20 S5S P R5S - A00000473

DISPERSING TOOL D20 S40C P R25C - A00000472

DISPERSING TOOL D20 S25F P R25M - A00000469

DISPERSING TOOL D20 20F P R20M - A00000464

DISPERSING TOOL D20 S20F P R20E - A00000463

DISPERSING TOOL D20 S20F P R20C - A00000462

HOMOGENIZER PRECELLYS EVOLUTION TOUCH - P002511-PEVT0-A.0

KIT LYSING PROTEIN SAFE SOFT TISSUE - P000973-LYSK0-A.0

HOMOGENIZER PRECELLYS 24 TOUCH - P002391-P24T0-A.0

GenoLyte® Homogenizer and 5120 Mixer/Mill® Grinder Accessories, SPEX SamplePrep - 1200C-10, 1200C-10 chiller hose, blue, 42L×0.5 IN.Int.Ø, fitted with a CPC Quick-Disconnect male valves coupling

Grinding Dishes for 8550 ShatterBox®, SPEX SamplePrep - 8521-H, 8504-H grinding container with handles, hardened steel, 650 ml

Grinding Dishes for 8550 ShatterBox®, SPEX SamplePrep - 8506-H, 8504-H grinding container with handles, zirconia, 170 ml

Grinding Dishes for 8550 ShatterBox®, SPEX SamplePrep - 8504-H, 8504-H grinding container with handles, tungsten carbide, 240 ml

Grinding Dishes for 8550 ShatterBox®, SPEX SamplePrep - 8501-H, 8501-H grinding container with handles, hardened steel, 270 ml

Multi Vial Adapters, SPEX SamplePrep - 8019, 8019 multi vial adapter, aluminum, holds 7×5 ml plastic vials

Multi Vial Adapters, SPEX SamplePrep - 8018, 8018 multi vial adapter, aluminum, holds 7×2 ml 2310 vials

Grinding Vial Sets and Grinder Balls, SPEX SamplePrep - 8001LC, 8001LC metal hardened steel low chrome vial set, non sterile

GenoLyte® Homogenizer and 5120 Mixer/Mill® Grinder Accessories, SPEX SamplePrep - 1217, 1217 GenoLyte® homogenizer vial holder, 1×3.5 ml agate vial 3120

GenoLyte® Homogenizer and 5120 Mixer/Mill® Grinder Accessories, SPEX SamplePrep - 1213, 1213 GenoLyte® homogenizer vial holder with Sseeve, 2×7 ml vial

Grinding Vial Sets and Grinder Balls, SPEX SamplePrep - 5006, 5006 tungsten carbide-lined vial set, non sterile

Vials for Homogenizers, SPEX SamplePrep - 2256, 2256 clear plastic jar with white aluminum lined plastic screw cap, 16 oz. (480 ml), 3.5Ext.Ø×3.375 IN.H, non sterile

Geno/Grinder® Homogenizer Accessories, SPEX SamplePrep - 2261, 2261 extractor

Vial and Jar Holders, SPEX SamplePrep - 2257, 2257 homogenizer foam holder, 16× grinding vials (2255 vials)

1600 MiniG® Automated Homogenizer Accessories, SPEX SamplePrep - 1688, 1688 MiniG® homogenizer foam block, holds 2×75 ml jars 2254 PC jars

Grinding Vials, SPEX SamplePrep - 6133PC-T, 6133PC-T grinding vials, polycarbonate, reinforced cap with slip-on cap, 12 ml, clear cap, non sterile

Grinding Balls, Steel, SPEX SamplePrep - 6133B, ¿/16 IN. (14 mm), 6133B hardened steel ball

Grinding Vial Sets and Grinder Balls, SPEX SamplePrep - 5006B, 5006B tungsten carbide grinding ball, 5/16 IN. (7.9 mm)

2030 Geno/Grinder® Automated Homogenizer, SPEX SamplePrep - 2030, 2030 Geno/Grinder® automated high-throughput homogenizer with Ccamp for one microplate

1200C Temperature Controlled GenoLyte®, SPEX SamplePrep - 1200C, 3×2 ml vials, 1200C Temperature Controlled GenoLyte®

SP Bel-Art ProCulture Micro-Tube Homogenizer System, Bel-Art Products, a part of SP - F65100-0000, Cordless Homogenizer Unit

Accessories for BenchMasher 400 Paddle Blender, Benchmark Scientific - IPD4400-B400F2, Blender bags, 400 ml, with full nylon filter

Accessories for BenchMasher 400 Paddle Blender, Benchmark Scientific - IPD4400-B400F1, Blender bags, 400 ml, with lateral (side) filter

Accessories for BenchMasher 400 Paddle Blender, Benchmark Scientific - IPD4400-B400, Blender bags, 400 ml, 300×180 mm

BenchMasher 400 Paddle Blender, Benchmark Scientific - IPD4400-E, 3 - 400 ml, BenchMasher 400 paddle blender, US plug

BenchMasher 400 Paddle Blender, Benchmark Scientific - IPD4400, 3 - 400 ml, BenchMasher 400 paddle blender, US plug

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD1196-40, 96 well plate, 2 ml, pre-filled with 4 mm balls, with sealing mat

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - D1134-50, Stainless steel grinding balls, 5 mm

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD1133-40, Stainless steel grinding balls, 4 mm

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - D1133-28, Stainless steel grinding balls, 2.8 mm

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD9600-10SBS, Stainless steel grinding balls, 10 mm

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD9600-25BS, Stainless steel grinding balls, 25 mm

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD9600-50T, Adapter for 4×15/50 ml tubes (set of 2)

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD9600-25G, Replacement gasket for 25 ml stainless steel jar

BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Scientific - IPD9600

Bead Genieâ„¢ Bead Mixers, Scientific Industries Inc - SI-B101, Bead mixer, Bead Genieâ„¢, without plug

Bead Genieâ„¢ Bead Mixers, Scientific Industries Inc - SI-B100, Bead mixer, Bead Genieâ„¢

TUBE BEAD PRE-FILLED 2ML PK500

Accessories for Omni Bead Ruptor Homogenizer, Omni International - 19-900M, Active grinding media, 50/pack

Accessories for Omni Bead Ruptor Homogenizer, Omni International - 27-1003, Tube holders set of 2, 50 ml

Bead Ruptor 96 Bead Mill Homogenizer, Omni International - 27-0001, Bead Ruptor 96

Bertin Instruments Metal tubes, Bertin Corp - P000952-LYSK0-A.0, Metal tubes

Bertin Instruments Metal tubes, Bertin Corp - P000951-LYSK0-A.0, Full M-pack

Bertin Instruments Anti-rotation Kit for Precellys 24, Bertin Corp - S000704-PR240-A.0, Antirotation kit

Bertin Instruments White Blocking Plate, 2 ml, Bertin Corp - S000680-PR240-A.0, White blocking plate, 2 ml

Bertin Instruments User Maintenance Kit for Precellys Evolution, Bertin Corp - S000808-PEVO0-A.0, Precellys Evolution maintenance kit

Cryolys Evolution, Bertin Corp - P000671-CLYS2-A.0, 1.5 kg (3.3 lbs.) of dry ice, Cryolys® Evolution

Polytron® Generator, PT-DA/2WEC-E192, Kinematica - 11030276, Polytron® 20 mm generator, PT-DA 20/2WEC-E192

Polytron® Generator, PT-DA/2MEC, Kinematica - 11030293, Polytron® 25 mm generator, PT-DA 25/2MEC-E192 for the extraction and dissolution of organic materials

Polytron® Generator, PT-DA/BEC (BIOTRONA), Kinematica - 11030288, Polytron® 20 mm generator, PT-DA 20/BEC-E192 (BIOTRONA)

Polytron® Generator, PT-DA/BEC (BIOTRONA), Kinematica - 11030286, Polytron® 12 mm generator, PT-DA 12/BEC-E157 (BIOTRONA)

Polytron® Generator, PT-DA/BEC (BIOTRONA), Kinematica - 11030034, Polytron® 7 mm generator, PT-DA 07/BEC-E107 (BIOTRONA) 

Polytron® Disposable 12 mm Generator, PT-DA 12/2SYN-E123, Kinematica - 11030035, Polytron® Disposable 12 mm generator, PT-DA 12/2SYN-E123

Lab Blender Stomacher 400 Evo 80-400Ml. Stomacher 400 EVO Lab Blender, provides maximum performance, minimising noise and consumable waste. For sample volumes from 80 ml to 400 ml, offers fast reliable blending and homogenisation of a broad range of laboratory samples.

AS 501.3 Separating funnel attachment - For shaking out, eluting, extracting, gassing out, dissolving, Dimensions (W x D x H): 480 x 505 x 190 mm, Capacity: 4 x 500 or 3 x 1000 or 2 x 2000 ml, Weight: 3720 g

AS 501.4 Fixing clip support. AS 501.4 Fixing clip attachment - Dimensions (W x D x H): 475 x 460 x 95 mm, Capacity: 110 x AS 2.1 (25 ml) fixing clips (volume): 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS

AS 501.2 Separating funnel attachment. Dimensions (W x D x H): 480 x 505 x 190 mm, Capacity: 12 x 50 ml or 10 x 100 ml or 6 x 250 ml. Weight: 4180 g

Homogenizer Genolyte Tissue 115V/230V. Homogenizer, GenoLyte, Power Cord: 3-prong grounded plug, Motor: 1/7 HP, Clamp Speed: 750, 2000, 3000, 4000 RPM, Applications, Protein Extraction, Biofuel research, Dimension: 15x8in, Voltage: 115V / 60Hz or 230V / 50Hz

Ball Mill Double Jar Capacity 200W Motor. Ball mill, Designed for Double Jar Capacity, 200W motor and designed to take two of any Shimpo ball mill jar sizes(1l, 2l, 3l, 5l and 10l), Robust yet compact design, Very well made, Main body is strong steel construction for a long life and quiet operation

Ball Mill 200W Motor Robust F/Single Jar. Ball mill, Designed for single jars, 200W motor and is compatible with all of the Shimpo Ball Mill Jars(1l, 2l, 3l, 5l and 10l), Robust yet compact design, Very well made, the main body is a strong steel construction for a long life and quiet operation

Grinding Container Small Tungsten Carbide 80mL. Grinding Container, Includes puck, dish with gasket, and lid, made of solid tungsten carbide, has reinforcing aluminum band, Long-wearing and very high efficiency, Composition: Major Elements G W, C, Co, Dim

Rack for grinding containers. Rack, Holds one or three 8507 or 8508 grinding containers in Shatterbox, Four locating pins for positioning either one or three small containers, with handles to easily lift, lid is matched to Shatterbox clamp and holds down

Grinding Container Small Hardened Steel 90 mL. Grinding Container, Includes puck, dish with gasket, and lid, made of 52-100 hardened steel, Moderate resistance to abrasion, High durability and efficiency, Suitable for slurry grinding, Resists chemical att

Grinding Container Zirconia Ceramic 170mL. Grinding Container, lined with Mg-stabilized zirconia ceramic, Includes puck, dish with O-ring gasket, and lid, Extremely high resistance to abrasion, wears very slowly, High efficiency, Suitable for slurry grind

Grinding Container Alumina Ceramic 170mL. Grinding Container, lined with 99.5% alumina ceramic, Includes puck, dish with O-ring gasket, and lid, Ideal for grinding extremely hard, brittle samples, Long-wearing, very abrasion-resistant, moderate efficiency

Grinding Container Tungsten Carbide 240 mL. Grinding Container, lined with tungsten carbide, Includes puck, ring, dish with O-ring gasket, and lid, High resistance to abrasion, Long-wearing and very high efficiency, Suitable for slurry grinding, Dimension

Grinding Container Hardened Steel 270 mL. Grinding Container, with puck, dish, and lid, made of 52-100 hardened tool steel, High durability and efficiency, Suitable for slurry grinding, Hardness: Mohs 5.5 - 6, Moderate resistance to abrasion, Dimensions:

Adapter for 6135 Vial. Adapter, Material: Aluminum, for (6135) 75mL Polypropylene Grinding Vial with Attached Cap, For use with the 8000M Mixer/Mill-High-Energy Ball Mill

Adapter for 6134 Vial. Adapter, Material: Aluminum, for (6134) 35mL Polypropylene Grinding Vial with Attached Cap, For use with the 8000M Mixer/Mill-High-Energy Ball Mill

Clamp for Slurry Grinding. Clamp, permit slurry grinding in the 8003 Alumina Ceramic Grinding Vial Set, prevent leakage during sample grinding

Agate Ball 1/2 in. Agate Ball, Replacement, Handmade from flawless Brazilian agate, for 8014 Grinding Vial Set, Ideal for grinding and mixing samples, Composition: Major element - Si; Minor elements - Al, Na, Fe, K, Ca, Mg, Hardness: Mohs 6-7, Diameter: 1

Grinding Vial Set Agate 45mL. Grinding Vial Set, Handmade from flawless Brazilian agate, Ideal for grinding samples in the 8000M/8000D Mixer/Mill, high resistance to abrasion, Hardness: Mohs 6-7, Composition: Major element-Si, Minor elements-Al, Na, Fe,

Methacrylate Ball 1/2 in. Grinding balls, Methacrylate, Disposable, ideal for pulverizing soft, brittle materials and for mixing powders, Composition: Major Element - C, Hardness: Mohs 1.5, Compatible with all SPEX SamplePrep plastic grinding vials, Diame

Zirconia Ceramic Ball 1/2 in. Ceramic Ball, Replacement, for 8005 Zirconia Ceramic Grinding Vial Set, Extremely high resistance to abrasion, wears very slowly, and results in little contamination, Hardness: Mohs 8 1/2, Composition: Major Element-Zr, Minor

8000D Mixer/Mill Dual High-Energy Ball Mill, with dual clamps that grinds dry, brittle samples, CE Approved, Motor: 1/3 hp, Dimensions: 25in(L)x21in(W)x14in(H), Electronic timer, Equipped with forced-air cool

Crucible Regular-Purity Graphite 44.5mL. Crucible, Material: Regular-Purity Graphite, also capable of casting 40 mm glass disks, Dimensions: 57.1mm(OD)x38.1mm(tall)x40mm(OD), with flat bottom, Chemically inert and heat-resistant, Cost effective, Disposabl

Crucible Regular-Purity Graphite 32 mL. Crucible, Material: Regular-Purity Graphite, also capable of casting 33.7mm glass disks, Dimensions: 50.8mm(OD)x38.1mm(tall)x33.7mm(OD), with flat bottom, Chemically inert and heat-resistant, Cost effective, Disposa

Crucible Regular-Purity Graphite 27 mL. Crucible, Material: Regular-Purity Graphite, also capable of casting 31 mm glass disks, Dimensions: 44.4mm(OD)x38.1mm(tall)x31 mm(OD), with flat bottom, Chemically inert and heat-resistant, Cost effective, Disposabl

Polycarbonate End Plug Mid-Size. Mid-Size Polycarbonate End Plug, Replacement, Made of durable polycarbonate, Ideal for grinding soft plant and animal tissues and eliminates metal contamination, Cleanable with hot water, Withstands liquid nitrogen tempera

Poly-Vial Set Mid-Size. Mid-Size Poly-Vial Set, For grinding soft tissues without metal contamination, includes one Mid-Size Polycarbonate Encapsulated Impactor, two Mid-Size Polycarbonate End Plug, and three Mid-Size Polycarbonate Center Cylinders, cylin

Large Extractor/Vial Opener Mid-Size Grinding Vial Adapter. Large Extractor/Vial Opener, for use with mid-size grinding vials/Adapter, Quick and easy installation, Compatible with 6881, 6883 and 6885 Mid-Size Grinding Vial Set

Impactor Cr-Free Steel Mid-Size. Mid-Size Impactor, Made of Cr-free ASTM 06 steel, Replacement, designed for grinding electronic components for RoHS/WEEE compliance testing, Withstands liquid nitrogen temperatures, for (6883) Mid-Size Cr-Free Grinding Via

Grinding Vial Accessory Package, contains one (6807) Multi-Vial Holder, one (6754) Extractor/Vial Opener, and one (6755) Vial Rack, ideal for running small grinding vials in the 6875 Freezer/Mill or 6875D Freezer/Mill

Mid-Size Vial Adapter package, includes 6884 Mid-Size Vial Adapter for 6804 Extractor/Vial Opener, and 6887 Mid-Size Vial Adapter, used for 6885 Mid-Size Poly-Vial in 6875D Freezer/Mill

Large Grinding Vial Accessory Package. Large grinding vial accessory package, Includes 6804 large extractor/vial opener and 6805 vial rack, Recommended when using large grinding vials in the 6875 Large Freezer/Mill, Compatible with Large Grinding 6801 an

Mid-Size Vial Adapter Kit is attachment for the 6808 extractor, it allows the extractor to remove the end plugs from mid-size vials,

Large Vial extractor. Extractor, opens large grinding vial sets used in large Freezer/Mills, provides higher throughput while reducing operator effort, Suction cups secure the extractor to the bench top, Samples can be removed while the vials are still co

Multi-vial Holder for small and micro vials, holds up to four small grinding vials (6751, 6761, 6771, 6781S), also hold up to four 6757 microvial set, Ideal for grinding multiple samples in the 6875 Freezer/Mi

Rack for Large Grinding Vials, Durable epoxy-coated steel construction, holds six (6801) or (6871) sets for storage and handling

Large Extractor/Vial Opener, lifts grinding vials in and out of the 6875 large Freezer/Mill, used to remove the end plugs from the center cylinders of large and mid-size grinding vials, Lever assists with end plug extraction,

Extractor for Microvials, end plug extractor for 6757 microvial set, Holds up to three microvals, Suction cups secure the extractor to the bench top, Samples can be removed while the vials are still cold

Microvial Impactor, for the 6757 microvial set.

Microvial End Plug (2).

Microvial Cylinder, Replacement, for the 6757 microvial set.

Delrin End Cap without Tungsten Carbide Insert, Replacement, for 5004 Tungsten Carbide Lined Grinding Vial Set - 5 mL

Methacrylate Center Cylinder Replacement. Methacrylate Center Cylinder, Replacement, for 5004 Tungsten Carbide Lined Grinding Vial Set - 5 mL, Disposable, Composition: Major Element G C, Hardness: Mohs - 1.5

Tungsten Carbide Grinding Ball 7.9mm. Grinding Ball, Tungsten Carbide, Replacement, for mixing and grinding samples, used with 5004 Tungsten Carbide Lined Grinding Vial Set - 5 mL, High resistance to abrasion, Long-wearing and very high efficiency, Hardne

Grinding Vial Set Tungsten Carbide Lined 5mL. Grinding Vial Set Tungsten Carbide Lined, Includes two slip-on Delrin caps with tungsten carbide inserts, six disposable methacrylate center cylinders and two 5/16 in grinding balls, High resistance to abrasi

Prep-Aid Vertrel XF One-quart bottle. Prep-Aid Vertrel XF, Liquid fluorocarbon grinding aid, Prevents caking, reduces contamination, Enhances the grindability of almost any sample, Quickly evaporates, useful for grinding samples such as cement to particle

Paraffin Binder 450g. Paraffin Binder, with a particle size of less than 30 um, Ideal for samples which crumble or ablate after pressing, Blends quickly and completely with samples, Forms air-stable sample disks, Moisture resistant and resist contaminatio

Paraffin Binder 150g. Paraffin Binder, with a particle size of less than 30 um, Ideal for samples which crumble or ablate after pressing, Blends quickly and completely with samples, Forms air-stable sample disks, Moisture resistant and resist contaminatio

UltraBind 450g. UltraBind, Specially formulated powder with particle size of less than 20um, Ideal for samples which crumble or ablate after pressing, Blends quickly and completely with samples, Self lubricating, Moisture resistant, include low level of

X-Press 35-ton. X-Press, hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets, Automatic and fully programmable, CE Approved, Ideal for repetitive pressing of sample pellets for XRF, IR, Dimensions: 20x13x22.5inc

Manual/Press Carver 12-ton. Manual/Press, Full-size 25-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm pellet die sets, Manually controlled, Rugged, reliable, CE Approved, Ideal for pressing sample pellets for IR, Dimen

Edge-Flaring Tool 35 mm. Edge-Flaring Tool, for flaring the edge of Spec-Caps to create a tighter fit in the pellet die, prevents sample loss and pellet jamming, Increases the rim diameter to 35 mm, Compatible with 3615 33 mm Spec-Caps, Size: 31mm

Sleeve-and-Plunger Set 31mm. Sleeve-and-Plunger Set, used with 3623 31mm Evacuable Pellet Die Set and any PrepAid sample binder, Allows easy preparation of XRF disks with binder matrix, Ideal for smaller amounts (less than 1g) of analyte, prevents damage

Steel Pellet 31mm. Steel Pellet, Replacement or spare, for 3623 31mm Evacuable Pellet Die Set, Ideal for routine pressing of non-abrasive materials, Polished face of pellet ensures a flat analytical surface, Made with a close tolerance and sharp edges, Si

Clamp Adapter, for the 8000D Dual Mixer/Mill, Required when running 8010 Multiple Sample Adapter with vials 1 in. (25.4 mm) in length (3111, 3114, 3117) or when running 3127 vials with 8011 Multiple Sample Adapter

Multiple Sample Adapter for four Vials. Multiple sample adapter, holds seven vials, each 3/4 in.(19.1 mm) in diameter, Ideal for high-throughput applications that involve processing multiple smaller samples, Process 4 or 8 samples at a time with 8000M or

Multiple Sample Adapter for Seven Vials. Multiple sample adapter, holds seven vials, each 1/2 in.(12.7 mm) in diameter, Ideal for high-throughput applications that involve processing multiple smaller samples, Process 7/14 samples at a time with 8000M/8000

Grinding Vial Set Stainless Steel 65mL. Grinding Vial Set, stainless steel, High durability and efficiency, Resists chemical attack, Suitable for slurry grinding, Hardness: Mohs 5 - 5.5, Ideal for grinding hard, brittle samples to an analytical fineness i

Tungsten Carbide Pellet 31mm. Tungsten Carbide Pellet, Replacement or spare, for 3623 31mm Evacuable Pellet Die Set, Ideal for routine pressing of abrasive materials, Harder than steel pellets, Polished face of pellet ensures a flat analytical surface, Si

Evacuable Pellet Die Set, 31mm. Evacuable Pellet Die Set, standard sample disks for XRF, includes evacuable die body, base, plunger, two 31 mm polished steel pellets (3623ST), O-ring vacuum seals, and knock-out ring for sample disk extraction, Compatible

Manual/Press Carver 25-ton. Manual/Press, Full-size 25-ton (22.7 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets, CE Approved, Ideal for pressing sample pellets for XRF, IR, Dimensions: 10

X-CELL Closed 43mm. X-CELL, Disposable, closed, X-ray cell with collar, Material: contaminate-free polyethylene, used for fast, dependable, reproducible running of liquid samples in Horiba Sulfur Analyzer, Includes a snap-on collar and cup with vent and

X-CELL Closed 43mm. X-CELL, Disposable, closed, X-ray cell with collar, Material: contaminate-free polyethylene, used for fast, dependable, reproducible running of liquid samples in Horiba Sulfur Analyzer, Includes a snap-on collar and cup with vent and

X-CELL Universal Closed 31mm. X-CELL, Universal, Disposable, closed, X-ray cell with collar, Material: contaminate-free polyethylene, used for fast, dependable, reproducible running of liquid samples in XRF spectrometers, Includes a polyethylene snap-ri

Mylar Thin Film (Roll) 0.25mil. Mylar Thin Film (Roll), for XRF liquid sample cups, Dimensions: 73mm (wide) x 92m (long), Incredibly strong and heat resistant to over 100 degC, Resistant to organic chemicals, fit all SPEX SamplePrep X-Cells, Thickness:

Kapton Thin Film (Roll) 0.3mil. Kapton Thin Film (Roll), for XRF liquid sample cups, Dimensions: 73mm (wide) x 15m (long), Incredibly strong and heat resistant to over 300 degC, Chemically impervious, Phosphate-based surface coating, Thickness: 0.3mil (

Shatterbox Friction Disk.

Hardened Tool Steel Grinding Vial Set 5 mL. Hardened Tool Steel Grinding Vial Set, Durable, tough, and suitable for general-purpose grinding, Grinding ball is made of type 52-100 steel, Dimensions: 19.1 mm x 47.6 mm, Includes two slip-on cap and steel bal

Agate Vial Set 22.2 x 50.3mm. Agate Vial Set, 3.5ml vol with one 1/4in ball, Ideal for grinding and mixing samples in 5100/ 8000M and 8000D Mixer/Mill, High resistance to abrasion & long wearing for efficiency, Diameter: 22.2mm diameter x 50.3mm length

Methacrylate Grinding Ball 1/4in. Methacrylate Grinding Ball, Disposable, ideal for pulverizing soft, brittle materials and for mixing powders, Composition: Major Element G C, Hardness: Mohs 1.5, Compatible with all SPEX SamplePrep plastic grinding vials,

Agate Grinding Ball 1/4in. Agate Grinding Ball, for 3118 Agate Grinding Vial Set (1.6 mL), Handmade from flawless Brazilian agate, Extremely high resistance to abrasion, Composition: Major element-Si; Minor elements-Al, Na, Fe, K, Ca, Mg, Diameter: 1/4in,

Hardened Steel Grinding Ball 1/4 in. Hardened Steel Grinding Ball, for 3117 Hardened Tool Steel Vial Set (2.5 mL/5 mL), Made of type 52-100 steel, Composition: Major Element G Fe; Minor Elements G Cr, Si, Mn, C, Durable and tough, Diameter: 1/4in, Hardnes

Hardened Tool Steel Grinding Vial Set 2.5 mL. Hardened Tool Steel Grinding Vial Set, Durable, tough, and suitable for general-purpose grinding, Grinding ball is made of type 52-100 steel, Dimensions: 12.7 mm (diameter) x 25.4 mm (long), Includes a slip-on

Pre-Filled tubes with 2.8 mm SS Grinding Balls 2 mL. Pre-Filled microfuge tubes, Self-standing, with screw-cap, with 2.8 mm Stainless Steel Grinding Balls, Most dense of all the grinding media, moderate cost, suitable for tissues, Size: 2 mL

Stainless Steel Grinding Balls, Size: 2.8 mm.

Pre-Filled tubes with 800 um Silica Beads 2 mL. Pre-Filled microfuge tubes, Self-standing, with screw-cap, with 800 um acid washed silica beads, suitable for molds and pollen, Size: 2 mL

Pre-Filled tubes with 400 um Silica Beads 2 mL. Pre-Filled microfuge tubes, Self-standing, with screw-cap, with 400 um acid washed silica beads, ideal for yeasts such as Saccharomyces, Size: 2 mL

Pre-Filled tubes with 100 um Silica Beads (600mg) 2 mL. Pre-Filled microfuge tubes, Self-standing, with screw-cap, with 100 um acid washed silica beads (600mg), Suitable for Bacteria samples, Size: 2 mL

Pre-Filled tubes with Silica and Zirconium Beads 2mL. Pre-Filled microfuge tubes, with screw-cap, 100 um Silica Beads, 1.4 mm zirconium beads and a 4 mm silica bead (Acid Washed), SSuitable for biofilms and plant tissues, Size: 2 mL

Pre-Filled tubes with 800 um and 1.4 mm Zirconium beads 2mL. Pre-Filled microfuge tubes, with screw-cap, with 800 um and 1.4 mm Zirconium beads (acid washed), Suitable for mycelium and soft leaves, Size: 2 mL

Pre-Filled tubes with Garnet and Zirconium Beads 2mL. Pre-Filled microfuge tubes, with screw-cap, 500 um Garnet and a 6 mm Zirconium Grinding Satellite, Suitable for general sample shredding, Size: 2 mL

Pre-Filled tubes with 6.0 mm Zirconium Beads 2mL. Pre-Filled microfuge tubes, with 6.0 mm Zirconium Beads (Ceria Stabilized), Self-standing, with screw-cap, has two large (6mm) heavy balls that are able to grind tougher plant samples more effectively and

Pre-Filled tubes with 3.0 mm Zirconium Beads 2mL. Pre-Filled microfuge tubes, with 3.0 mm Zirconium Beads (Acid Washed), Self-standing, with screw-cap, Good for larger tissue samples, Excellent chemical resistance to organics, Size: 2 mL

Zirconium Beads - Acid Washed, Size: 3mm.

Pre-Filled tubes with 200um Zirconium Beads 2mL. Pre-Filled microfuge tubes, with 200um Zirconium Beads (Acid Washed), Self-standing, with screw-cap, ideal for bacteria, small yeasts (example: Pichia), Size: 2 mL

Pre-Filled tubes with 1.7 mm Zirconium Beads 2mL. Pre-Filled microfuge tubes, with 1.7 mm Zirconium Beads (Acid Washed), Self-standing, with screw-cap, Effective for larger tissue samples and fine plant materials, Size: 2 mL

Pre-Filled tubes with 1.4 mm Zirconium Beads 2mL. Pre-Filled microfuge tubes, with 1.4 mm Zirconium Beads (Acid Washed), Self-standing, with screw-cap, Suitable for small tissue samples and biomass, Size: 2 mL

Pre-Filled tubes with 100um Zirconium Beads 2mL. Pre-Filled microfuge tubes, with 600 mg of 100 um Zirconium Beads (Acid Washed), Self-standing, with screw-cap, suitable to disrupt finer soils, Size: 2 mL

Pre-Filled tubes with 1.0 mmZirconium Beads 2mL. Pre-Filled microfuge tubes, with 1.0mm Zirconium Beads (Acid Washed), Self-standing, with screw-cap, suitable to disrupt finer soils, Size: 2 mL

Pre-Filled tubes with Silica beads 2mL. Pre-Filled microfuge tubes, with 100um Silica Beads (Molecular Biology Grade), Self-standing, with screw-cap, For Bacteria Applications, Size: 2 mL

Foam Holder, for 2mL Tubes, Thick, rugged foam block holds 48 microfuge tubes.

Cryo-Block for 2255 Cryogenic Grinding Vial Set. Cryo-Block, for 2255 Cryogenic Grinding Vial Set, Material: Aluminum, includes two Cryo-Blocks, For use with 2189 clamp, holds eight 2255 vials, allows 16 samples to be run simultaneously (Geno/Grinder spee

Cryogenic Grinding Vial Pack, designed for grinding tough samples such as bone and plant material at room temperature using Geno/Grinder, consists of 2 end plugs, a polycarbonate cylinder and 2 stainless steel grinding balls,

Polycarbonate Vial with Screw-On Cap 50 mL. Polycarbonate Vial with Screw-On Cap, Holds up to 1/2 inch grinding media, Dimensions: 1-1/8 in diameter x 4-1/2 in long (2.9 cm x 11.4 cm), Compatible with 2196-16-PE Holder and 2664 Cryo-Block, Well Volume: 50

Polycarbonate Vial with Screw-On Cap 15 mL. Polycarbonate Vial with Screw-On Cap, withstand liquid nitrogen temperatures, Dimensions: 5/8 in diameter x 4-3/4 in long (1.6 cm x 12.1 cm), Compatible with 2661 Cryo-Block, useful for pesticide residue analysi

Polycarbonate Vial with Screw-On Cap 15 mL. Polycarbonate Vial with Screw-On Cap, Short, Pre-cleaned with grinding load per vial 6 mL, Ideal for larger samples, Dimensions: 1-1/8 in diameter x 1-2/3 in long (28.6 mm x 43.2 mm), Compatible with 2660 Cryo-B

Vial Set Pre-Cleaned 15 mL Short Polycarbonate, Well Shape: Flat bottom, Well Volume: 15 mL, Well Working Volume: 6 mL, Makes sample preparation faster and easier, compatible with Cryo-Block to preserve temp

Vial with Screw-On Cap 5mL Frosted PE. Vial with Screw-On Cap 5 mL Frosted Polyethylene, Ideal for larger samples that are too big for standard titer plates, Diameter: 1/2 x 2 in (12.7 mm x 50.8mm). Holds 3/8in (9.5mm) steel grinding ball, Grinding load p

Vial with Screw-On Cap 5 mL Polycarbonate, Ideal for larger samples that are too big for standard titer plates, Diameter: 1/2 x 2 in (12.7 mm x 50.8 mm). Holds 3/8in (9.5mm) steel grinding ball, Grinding load pe

Vial Set 5 mL Frosted Polyethylene. Vial Set 5mL Frosted Polyethylene (24), Makes sample preparation faster and easier, Each vial is loaded with 3/8in (9.5mm) Steel Grinding Ball, Well Shape: Flat bottom, Well Volume: 5 mL, Well Working Volume: 1.5mL, wit

Vial Set Pre-Cleaned 5 mL Polycarbonate. Vial Set Pre-Cleaned 5mL Polycarbonate, includes 24 pre-cleaned PC Vial, Each vial is loaded with one 3/8 in (9.5 mm) Steel Grinding Ball, Well Shape: Flat bottom, Well Volume: 5 mL, Well Working Volume: 1.5mL, wit

Cap-Mat for Square 24 - Well Titer Plate. Cap-Mat specifically designed for Square, 24 - Well Titer Plate, Sealing mat, Tightly seals, Prevents spills and well-to-well contamination, sterilized and reused, Made of rugged silicone rubber

Cap-Mat for Square 24 - Well Titer Plate. Cap-Mat specifically designed for Square, 24 - Well Titer Plate, Sealing mat, Tightly seals, Prevents spills and well-to-well contamination, Made of rugged silicone rubber, sterilized and reused

Titer Plate 24 - Square Well. Titer Plate 24 - Well Square, Deep well has a volume of 10 ml and a working volume of 4 mL, Alphanumeric marks for well identification, Durable polypropylene construction, Process 192 samples at a time by running two titer pl

Titer Plate 24 - Square Well. Titer Plate 24 - Well Square, Deep well has a volume of 10 ml and a working volume of 4 mL, Alphanumeric marks for well identification, Durable polypropylene construction, Process 192 samples at a time by running two titer pl

Cap-Mat for Round 96 - Well Titer Plate. Cap-Mat specifically designed for Round, 96 - Well Titer Plate, Sealing mat, Tightly seals, Prevents spills and well-to-well contamination, Made of rugged silicone rubber, sterilized and reused

Titer Plate 96 - Round Well. Titer Plate 96 - Well Round, Deep well has a volume of 1.0 ml and a working volume of 0.7 mL, Alphanumeric marks for well identification, Durable polypropylene construction, Process 192 samples at a time by running two titer p

Micro X-CELL 31mm. Micro X-CELL, Disposable X-ray cell with collar, Features: 6.3 mm window is centered in standard 31mm sample holder, Material: Polyethylene, Aperture: 6.3mm, Capacity: 0.5ml, Outer Diameter: 1.244in, Can be run with open back, sealed

Micro X-CELL 31mm. Micro X-CELL, Disposable X-ray cell with collar, Features: 6.3 mm window is centered in standard 31mm sample holder, Material: Polyethylene, Aperture: 6.3mm, Capacity: 0.5ml, Outer Diameter: 1.244in, Can be run with open back, sealed

X-CELL Double Open-Ended 31 mm. X-CELL Double Open-Ended Disposable X-ray cell Collar holds ring in place while film is being applied, Includes a polyethylene snap-ring and collar, and open body, Material: polyethylene, Aperture: 24.5mm, Capacity: 10ml,

Cap-Mat for Square 96 - Well Titer Plate. Cap-Mat specifically designed for Square, 96 - Well Titer Plate, Sealing mat, Tightly seals, Prevents spills and well-to-well contamination, Made of rugged silicone rubber, sterilized and reused

Titer Plate 96 - Square Well. Titer Plate 96 - Well Square, Deep well has a volume of 2.4 ml and a working volume of 2 mL, Alphanumeric marks for well identification, Durable polypropylene construction, Process 192 samples at a time by running two titer p

Vial Holder Short 15 mL. Vial Holder Short, Used in the Geno/Grinder for shaking samples in short 15 mL vials (PC). Holds up to 12 x 15 mL vials

Clamp Adjustable, MiniG is supplied with this adjustable clamp that easily adjusts to fit various sizes of titer plates and vials. It accommodates up to 48 x 2 mL trays of vials when stacked

Foam Holder, Rugged block for the MiniG that holds six standard 50 mL tube.

Foam Holder for MiniG 15 mL, Rugged foam block holds 12 standard 15 mL tubes.

Tungsten Carbide Ball 7/16 in. Replacement tungsten carbide ball for Tungsten Carbide Grinding Vial Set and Steel-Jacketed Tungsten Carbide Grinding Vial Set, High resistance to abrasion, Long-wearing and very high efficiency, Hardness: Mohs 8 1/2 + Knoop

Grinding Vial Set Tungsten Carbide 55 mL. Grinding Vial Set Tungsten Carbide, High resistance to abrasion, includes tungsten carbide-lined body, two screw-on tungsten carbide-lined caps, two 7/16in (11.2mm) tungsten carbide balls, and eight corprene gaske

Alumina Ceramic Ball 1/2 in (12.7 mm). Replacement alumina ceramic ball for Alumina Ceramic Grinding Vial Set, Long-wearing, very abrasion-resistant, and moderate efficiency, Made of 99.5% pure aluminum oxide, Hardness: Mohs 9; Rockwell R45N 83; Knoop 210

Mixer/Mill High-Energy Ball Mill 115V/60HZ. Mixer/Mill High-Energy Ball Mill, Voltage: 115V/60Hz, Motor: 1/3 hp, 1725 RPM at 60Hz, Power Cord: 3-prong grounded plug, Timer/Controls 100 minute range. Expandable up to 1,000 or 10,000 range, Dimensions: 21

Mixer/Mill - Dual High-Energy Ball Mill 230V/50Hz. Mixer/Mill - Dual High-Energy Ball Mill, Voltage: 230V/50Hz, Power Cord: 2-prong European plug, Motor: 1425 RPM at 50Hz, Clamp Movement: 2 1/3 in (5.9cm) back-and-forth, 1 in (2.5cm) side-to-side, Dimen

High-Purity Graphite Crucible 27 mL Capacity. Graphite Crucible, with flat bottom, Chemically inert and heat-resistant, Made of high-purity graphite with total metallic impurity limitsof 2 ppm, Ideal for trace-level analytical work, Diameter: 44.4 mm O.D.

Grinding Vial Set Large 25 g sample Size. Grinding Vial Set, Large, Includes: Large Stainless Steel Impactor (1), Large Stainless Steel End Plugs (2), and one pack of (6801C4) Large Polycarbonate Center Cylinders, No Slurry Grinding, Sample Capacity - Gri

Vial Impactor extractor for Freezer/Mill Vial, Magnetic.

Grinding Vial Set Stainless Steel. Grinding Vial Set, Set includes stainless steel impactor, SS center cylinder, two end plugs, and pack of 10 O-rings. Used to grind hard samples like bone and circuit boards. Sample grinding capacity 0.1 gram - 5.0 gram,

O-rings for Stainless Steel Grinding Vial Set(Set of 10).

Vial Rack for Small Grinding Vial Durable glass. Vial Rack for Small Grinding Vial, Durable glass-reinforced acetal construction, Holds up to sixteen small grinding vials: Small Grinding Vial Set, Small Poly-Vial Set, Small Cr-Free Grinding Vial Set, for

Extractor/Vial Opener for Small Vial, easier to open cold grinding vials immediately after they have been removed from the Freezer/Mill, Compatible with small grinding vials: Small Grinding Vial Set, Small Poly-Vial S

Sample extraction tool, for removing ground samples from the 6757 Microvial Set. Simply inserted the extraction tool into an individual vial, then push it through to clear sample from the tube

Impactor Small Stainless Steel. Replacement Impactor Small Stainless Steel, for Small Grinding Vial Set, Withstands liquid nitrogen temperatures, Autoclavable and reusable, Made of 440C stainless steel

Grinding Vial Polypropylene 75 mL. Grinding Vial Polypropylene with Attached Cap, Suitable for slurry grinding, Compatible with 3112 Methacrylate Grinding Balls, 3/8 in. (9.5 mm) and 8006A Methacrylate Balls, 1/2in (12.7mm), Hardness: Mohs 1 1/2, Sample C

Grinding Vial Polypropylene 35mL. Grinding Vial Polypropylene, with Attached Cap, Disposable ideal for pulverizing soft, brittle materials and for mixing liquid in the 8000M Mixer/Milland 8000D Dual Mixer/Mill, Sample Capacity - Grinding/Mixing: 15 mL,

Grinding Vial with Slip-On Cap 12 mL PS. Grinding Vial with Slip-On Cap, Disposable, Polystyrene, Sample Capacity - Grinding: 5mL, Sample Capacity - Mixing: 5 mL, Hardness Mohs: 1 1/2, Suitable for slurry grinding, Typical composition: Major Element-C, Di

Vial Holder 5 mL. Vial Holder, Used in the Geno/Grinder for shaking samples in 5 mL vials (PC and PEF), Vial holder accommodates up to 48 x 5 mL vials

Clamp Adjustable for Geno/Grinder large lid. Clamp Adjustable for Geno/Grinder large lid, It holds up to three layers of deep-well titer plates and other titer plates, tubes and vials of equal or lesser height, hand-knob with a quick-release button, o mo

Cryoplate use adjustable clamp for Geno/Grinder. Cryoplate keeps samples cold during the grinding process in the Geno/Grinder, used with the adjustable clamp, place the cryoplate on top of vials or titer plates loaded in the adjustable clamp, Fasten the

Clamp Adjustable for Geno/Grinder, to fit various sizes of titer plates and vials, easily fits up to 6 deep-well titer plates and up to sixteen 50 mL tubes, Release mechanism for sliding clamp up and down the shaft, Tite

Zirconia grinding bead, Size: 6mm.

Grinding Cylinder Ceramic 5/32in x 5/16in. Grinding Cylinder Ceramic, Small, with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS)/extracting oil fr

Grinding Cylinder Ceramic 5/16in x 5/8in. Grinding Cylinder Ceramic, Medium, with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS)/extracting oil fr

Grinding Cylinder Ceramic 3/8x7/8in. Grinding Cylinder Ceramic, Large, with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (applications QuEChERS)/extracting

Grinding Bead Low Binding Zirconium 200 um. Grinding Bead Low Binding Zirconium, Acid washed Zirconium grinding beads. Chemically treated to keep samples from binding to titer plate wells. Particle Size: 200 um. Used for lysing dilute samples of cells in

Grinding Bead Low Binding Zirconium 100 um. Grinding Bead Low Binding Zirconium, Acid washed Zirconium grinding beads. Chemically treated to keep samples from binding to titer plate wells. Particle Size: 100 um. Used for lysing dilute samples of cells in

Zirconium Grinding Bead 200-400um. Zirconium Grinding Bead - Molecular Biology Grade, Particle Size: 200-400um, Acid washed RNase/DNase-free treated Zirconium beads, Treated to inactivate contaminating enzymes and remove fine particles, Compatable with Ti

Grinding Bead Low Binding Silica 100 um. Grinding Bead Low Binding Silica, Acid washed silica grinding beads. Chemically treated to keep samples from binding to titer plate wells. Particle Size: 100 um. Used for lysing dilute samples of cells in the Geno/

Grinding Bead Low Binding Silica 400 um. Grinding Bead Low Binding Silica, Acid washed silica grinding beads. Chemically treated to keep samples from binding to titer plate wells. Particle Size: 400 um. Used for lysing dilute samples of cells in the Geno/

Silica Grinding Bead 400-600um. Silica Grinding Bead - Molecular Biology Grade, Particle Size: 400-600um, Acid washed RNase/DNase-free treated silica grinding beads, Suitable for most basic cell lysis applications using the Geno/Grinder, Compatable with T

Silica Grinding Bead 400-600 um. Silica Grinding Bead, Acid washed, Suitable for most basic cell lysis applications using the Geno/Grinder, Treated to remove fine particles and contaminates, Bead/Particle Size: 400-600 um, Compatible with all Titer Plate

Grinding Bead Low Binding Silica 800 um. Grinding Bead Low Binding Silica, Acid washed silica grinding beads. Chemically treated to keep samples from binding to titer plate wells. Particle Size: 800 um. Used for lysing dilute samples of cells in the Geno/

Silica Grinding Bead 800-1000um. Silica Grinding Bead - Molecular Biology Grade, Particle Size: 800-1000um, Acid washed RNase/DNase-free treated silica grinding beads, Suitable for most basic cell lysis applications using the Geno/Grinder, Compatable with

Grinding Bead Silica 800-1000 um. Grinding Bead Silica, Acid washed, Particle Size: 800-1000um, Treated to remove fine particles and contaminates, Suitable for basic cell lysis applications using the Geno/Grinder, Treated to remove fine particles and con

Grinding Ball Stainless Steel 7/16 in (11 mm). Grinding Ball Stainless Steel, made of 440C stainless steel, Suitable for grinding extra large or tough samples in the Geno/Grinder, For grinding large or tough samples in titer plates and Vial Sets, Autoclav

Grinding Ball Stainless Steel 3/8 inch (9.5 mm). Grinding Ball Stainless Steel, made of 440C stainless steel, Compatable with 24-Well Titer Plates, 5 mL Polycarbonate/PE Vial, Suitable for grinding small tissue samples in the Geno/Grinder, Autoclavable an

Grinding Ball Stainless Steel 5/32 inch (4 mm). Grinding Ball Stainless Steel, made of 440C stainless steel. Used with grinding Ball Dispenser and all 96-well titer plates, Suitable for grinding small tissue samples in the Geno/Grinder, Autoclavable and r

Magnetic Tip Pack of 96. Magnetic Tip, Converts micropipette dispensers into pin magnets for removing grinding balls deep-well titer plates, Strong magnet easily removes grinding balls from titer plate well, Compatible with 2150 5/32 in. (4 mm) Grinding B

Magnetic Tip Pack of 12. Magnetic Tip, Converts micropipette dispensers into pin magnets for removing grinding balls from titer plate, Strong magnet easily removes grinding balls from titer plate wells, Compatible with 2150 5/32 in. (4 mm) Grinding Ball,

Nesting Plate, used to stack titer plates vertically in the adjustable clamp for the MiniG, plate keep the samples secure during the grinding process

ShatterBox Ring & Puck mill 115V/60Hz. ShatterBox Ring & Puck mill, Voltage: 115V/60Hz, Motor: 1/2 hp, 835 RPM, Power Cord: 3-prong grounded plug, Timer/Controls: LCD digital display with environmentally safe, push-buttonmembrane switch, Dimensions: 19

Grinding Container Large Hardened Steel, High durability and efficiency, Suitable for slurry grinding, Hardness: Mohs 5 1/2 - 6; Rockwell - C 60-65, Grinding load: 30-100 ml, Durable, tough, and suited for grinding

Grinding Vial Set Round-Ended Hardened Steel 35 mL. Grinding Vial Set Round-Ended Hardened Steel, Includes one screw-on cap, one O-ring, two 1/2 in (12.7 mm), and four 1/4in (6.35 mm) steel balls (Hardened Steel Ball Set), Suitable for slurry grinding, Di

Silicon Nitride Ball 1/2in (12.7mm). Replacement silicon nitride ball for Silicon Nitride Grinding Vial Set, Extremely high resistance to abrasion and very long-wearing due to superior hardness, Hardness: Mohs: 8 1/2 + Knoop 1600, Major Elements- Si; Min

Grinding Vial Set Silicon Nitride 45 mL. Grinding Vial Set Silicon Nitride, Includes solid silicon nitride vial and slip-on cap, Silicon Nitride Balls, 1/2 in. (12.7 mm), and seven corprene gaskets, Suitable for slurry grinding, Hardness: Mohs: 8 1/2 + Kn

Ball Set Stainless Steel. Replacement stainless steel grinding balls for Stainless Steel Grinding Vial Set, Includes two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) hardened 440C stainless steel balls, Resists chemical attack, Hardness: Mohs 5-5 1/2; Roc

Zirconia Ceramic Grinding Vial Set 45mL. Zirconia Ceramic Grinding Vial Set, includes solid zirconia ceramic grinding vial, slip-on cap, Zirconia Ceramic Balls, 1/2 in. (12.7 mm) and 7 corprene gaskets, useful for blending powders and emulsions, grinding

Grinding Vial Set Steel-Jacketed Tungsten Carbide 55 mL. Grinding Vial Set Steel-Jacketed Tungsten Carbide, screw-on caps and vial body are made of 304 SS and lined with tungsten carbide. Set Includes two 7/16 in (11.2 mm) tungsten carbide balls and six e

Cryo-Block for 15 mL Polycarbonate Vial. Cryo-Block, Aluminum block for the MiniG that holds six 15 mL Short Polycarbonate Vial with Screw-On Cap

Cryo-Block for 50 mL Centrifuge Tube. Cryo-Block, Material: Aluminum, for the MiniG that holds Six 50 mL round-bottom centrifuge tubes

Grinding Vial with Screw-On Cap Polystyrene 135 mL. Grinding Vial with Screw-On Cap, Polystyrene, Suitable for slurry grinding, Compatible with Methacrylate Grinding Balls, 3/8 inch (9.5 mm) and Methacrylate Balls, 1/2 inch, Wet /Dry-Mixing/grinding load:

Hardened Steel Ball Set. Replacement hardened steel grinding ball Set, includes two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls, Made of type 52-100 steel, Hardness: Mohs 5 1/2 - 6; Rockwell - C 60-65, High Durable and tough grinding balls su

Grinding Vial Set Hardened Steel 5.7 cm. Grinding Vial Set Hardened Steel, High durability and efficiency, includes a screw-on cap with O-ring, two 1/2 in (12.7 mm) and four 1/4 in.(6.35 mm) steel balls, Suitable for slurry grinding, Hardness: Mohs 5 1/2

Mixer/Mill High-Energy Ball Mill 230V/50Hz. Mixer/Mill High-Energy Ball Mill, Voltage: 230V/50Hz, Motor: 1/3 hp, 1425 RPM at 50Hz, Power Cord: 3-prong grounded plug, Timer/Controls 100 minute range. Expandable up to 1,000 or 10,000 range, Dimensions: 21

Short Nichrome Crucible Tongs 9 in. (229 mm) long. Short Nichrome Crucible Tongs for handling graphite crucibles, Constructed of a heat resistant nickel-chromium (nichrome) alloy, Inner Diameter: 1.000in, Overall Outer Diameter: 1.250in, Overall Height: 9

High-purity Graphite Crucible 8.4 mL. High-purity Graphite Crucible, with conical bottom, Chemically inert and heat-resistant, Made of high-purity graphite with total metallic impurity limitsof 2 ppm, Ideal for trace-level analytical work, Diameter: 31.8

Nichrome Crucible Rack 1.250in. Nichrome Crucible Rack, Heat-resistant, Constructed of a heat resistant nickel-chromium (nichrome) alloy, Withstands temperatures as high as 1200 C, Holds 6 Regular-Purity Graphite Crucible, Material: Nichrome, Inner Diame

Cryogenic Transfer Hose 6 ft (1.8 m) Long. Cryogenic Transfer Hose, Long, flexible stainless steel hose suitable for transferring cryogenic fluids such as liquid nitrogen. Fitted with a 3/8 inch (9.5 mm) NPT male fitting on one end and a female fitting on

Cryogenic Transfer Hose 4 ft (1.2 m) Short. Cryogenic Transfer Hose, Short, flexible stainless steel hose suitable for transferring cryogenic fluids such as liquid nitrogen. Fitted with a 3/8 in (9.5 mm) NPT male fitting on one end and a female fitting on

Portable Cryogenic Dewar 25L. Portable Cryogenic Dewar, Sturdy, aluminum 5-wheel roller base for safe and easy portability from room to room, Includes liquid withdraw device for dispensing liquid nitrogen directly into the Freezer/Mill and Large Freezer

Vial Adapter-closed end Mid-Size, vial holder is used as adapter for Mid-Size Poly-Vials, adapter is closed at the back end to provide the shim necessary to hold the PC end plugs firmly in place and prevent sample leakage

Vial Adapter Mid-Sized. Vial Adapter/holder Mid-Sized, with stainless steel end plugs, it open at the back end to allow the force of the impact to strike against the back anvil of the Freezer/Mill coil, For use with High capacity Freezer/Mill and Dual C

Encapsulated Impactor Mid-Size PC. Replacement encapsulated impactor Polycarbonate for Mid-Size Poly-Vial Set, Ideal for grinding soft plant and animal tissues and eliminates metal contamination, Withstands liquid nitrogen temperatures, cleaned with hot w

Replacement End Plug Mid-Size Cr-Free Steel. Replacement Cr-free steel end plugs for Mid-Size Cr-Free Grinding Vial Set, Specifically designed for grinding electronic components for RoHS/WEEE compliance testing, Withstands liquid nitrogen temperatures, A

Cr-Free Grinding Vial Set Mid-Size 25 mL. Cr-Free Grinding Vial Set Mid-Size, For grinding electronic components to test for chromium under RoHS/WEEE directives, Withstands liquid nitrogen temperatures, Polycarbonate center cylinders Transparent plastic,

Center Cylinder Mid-Size Polycarbonate. Replacement polycarbonate center cylinders for Mid-Size Grinding Vial Set, Mid-Size Poly-Vial Set/Mid-Size Cr-Free Grinding Vial Set, Transparent plastic center cylinder allows visual checking of the grinding progr

Center Cylinder Mid-Size Polycarbonate. Replacement polycarbonate center cylinders for Mid-Size Grinding Vial Set, Mid-Size Poly-Vial Set/Mid-Size Cr-Free Grinding Vial Set, Transparent plastic center cylinder allows visual checking of the grinding progr

Grinding Vial Set Mid-Size 25 mL. Grinding Vial Set, Mid-Size, Withstands liquid nitrogen temperatures, with Stainless steel end plugs and impactor and polycarbonate center cylinder, Transparent plastic center cylinder allows visual checking of thegrindin

Freezer/Mill Dual Chamber Cryogenic Grinder 230/50HZ. Freezer/Mill Dual Chamber Cryogenic Grinder, Voltage: 230/50HZ, Power Cord: 2-prong European plug, Timer/Controls:Touch-screen programmable controls for grinding cycles, time, pre-cooling and cooling

Freezer/Mill Dual Chamber Cryogenic Grinder 115V/60HZ. Freezer/Mill Dual Chamber Cryogenic Grinder, Voltage: 115V/60HZ, Power Cord: 3-prong grounded plug, Timer/Controls:Touch-screen programmable controls for grinding cycles, time, pre-cooling and cooli

Freezer/Mill High Capacity Cryogenic Grinder 230V/50Hz. Freezer/Mill High Capacity Cryogenic Grinder, Auto-Fill System, Voltage: 230V/50Hz, Power Cord: 2-prong European plug, Timer/Controls: Touch-screen programmable controls for grinding cycles, pre-co

Freezer/Mill High Capacity Cryogenic Grinder 115V/60HZ. Freezer/Mill High Capacity Cryogenic Grinder, Auto-Fill System, Voltage: 115V/60Hz, Power Cord: 3-prong grounded plug, Timer/Controls: Touch-screen programmable controls for grinding cycles, pre-co

Freezer/Mill High Capacity Cryogenic Grinder 230V/50Hz. Freezer/Mill High Capacity Cryogenic Grinder, Voltage: 230V/50Hz, Power Cord: 2-prong European plug, Timer/Controls: Touch-screen programmable controls for grinding cycles, time, impact rate, pre-c

Freezer/Mill High Capacity Cryogenic Grinder 115V/60HZ. Freezer/Mill High Capacity Cryogenic Grinder, Voltage: 115V/60Hz, Power Cord: 3-prong grounded plug, Timer/Controls: Touch-screen programmable controls for grinding cycles, time, impact rate, pre-c

Replacement Steel Large Impactor. Replacement Cr-free Large steel impactor for Large Cr-Free Grinding Vial Set, Specifically designed for grinding electronic components for RoHS/WEEE compliance testing, Withstands liquid nitrogen temperatures, Autoclavabl

Replacement End Plug Large Cr-Free Steel. Replacement Cr-free steel end plugs for Large Cr-Free Grinding Vial Set, Specifically designed for grinding electronic components for RoHS/WEEE compliance testing, Withstands liquid nitrogen temperatures, Autocla

Grinding Vial Set Large Cr-Free 25 g. Grinding Vial Set, Includes Large Cr-Free Steel Impactor (1), two Large Cr-Free Steel End Plugs (2), and one pack of Large Polycarbonate Center Cylinders, Transparent plastic center cylinder, Sample Capacity - Grindin

Center Cylinder Large Stainless Steel, for Large Grinding Vial Set, Replaces polycarbonate center cylinders when sample contact withplastic is not acceptable, Withstands liquid nitrogen temperatures, Made of nonmagne

Impactor Large Stainless Steel. Replacement Impactor Large Stainless Steel, for Large Grinding Vial Set, Withstands liquid nitrogen temperatures, Autoclavable and reusable, Made of 440C stainless steel

End Plug Large Stainless Steel. Replacement End Plug Large Stainless Steel, for Large Grinding Vial Set, Withstands liquid nitrogen temperatures, Autoclavable and reusable, Made of 440C stainless steel

Center Cylinder Large Polycarbonate. Replacement polycarbonate center cylinders for Large Grinding Vial Set, Large Poly-Vial Set, and Large Cr-Free Grinding Vial Set, Transparent plastic center cylinder allows visual checking of the grinding progress, Wi

Center Cylinder Large Polycarbonate. Replacement polycarbonate center cylinders for Large Grinding Vial Set, Large Poly-Vial Set, and Large Cr-Free Grinding Vial Set, Transparent plastic center cylinder allows visual checking of the grinding progress, Wi

Replacement end plugs for Stainless Steel Grinding Vial Set (one flat and one flanged, includes a pack of 10 O-rings)

Freezer/Mill Cryogenic Grinder 230V/50Hz. Freezer/Mill Cryogenic Grinder, Voltage: 230V/50Hz, Power Cord: 2-prong European plug, Timer/Controls Touch-screen programmable controls for grinding cycles, time, impact rate, pre-cooling and cooling times, Dim

Freezer/Mill Cryogenic Grinder 115V/60Hz. Freezer/Mill Cryogenic Grinder, Voltage: 115V/60Hz, Power Cord: 3-prong grounded plug, Timer/Controls Touch-screen programmable controls for grinding cycles, time, impact rate, pre-cooling and cooling times, Dim

Replacement Steel Small Impactor. Replacement Cr-free Small steel impactor for Small Cr-Free Grinding Vial Set, Specifically designed for grinding electronic components for RoHS/WEEE compliance testing, Withstands liquid nitrogen temperatures, Autoclavabl

Replacement End Plug Small Cr-Free Steel. Replacement Cr-free steel end plugs for Small Cr-Free Grinding Vial Set, Specifically designed for grinding electronic components for RoHS/WEEE compliance testing, Withstands liquid nitrogen temperatures, Autocla

Cr-Free Grinding Vial Set Small. Cr-Free Grinding Vial Set, designed to grind electronic components for RoHS/WEEE compliance testing, Polycarbonate center cylinder, Transparent plastic, Cr-free steel end plugs and impactor are autoclavable and reusable, S

Encapsulated Impactor Small PC. Replacement encapsulated impactor Polycarbonate for Small Poly-Vial Set, Ideal for grinding soft plant and animal tissues and eliminates metal contamination, Withstands liquid nitrogen temperatures, cleaned with hot water a

End Plug Small Polycarbonate. Replacement End Plug Small Polycarbonate, durable, for Small Poly-Vial Set, Ideal for grinding soft plant and animal tissues and eliminates metal contamination, Withstands liquid nitrogen temperatures, cleaned with hot water

Microvial Holder, Accessory Type: Vial and Vial Set.

Microvial Set for Small quantities. Microvial Set, ideal for grinding very small quantities of samples such as plant and animal tissue, Unique vial holder allows liquid nitrogen to flow freely around each microvial, Withstands liquid nitrogen temperatures

Extractor for small vial in Small Poly-Vial Set. Extractor for small vial, Features: Easily removes end plugs from vial, Suction cups secure extractor to the bench top, Compatable with Small Grinding Vial Set, Small Poly-Vial Set, Small Cr-Free Grinding V

End Plug Small Stainless Steel. Replacement End Plug Small Stainless Steel, for Small Grinding Vial Set, Withstands liquid nitrogen temperatures, Autoclavable and reusable, Made of 440C stainless steel

Center Cylinder Small Polycarbonate. Replacement polycarbonate center cylinders for Small Grinding Vial Set, Small Poly-Vial Set, and Small Cr-Free Grinding Vial Set, Transparent plastic center cylinder allows visual checking of the grinding progress, Wi

Grinding Vial Set Small 0.5 - 4mL. Grinding Vial Set Small, Includes Small Stainless Steel Impactor (1), Small Stainless Steel End Plugs (2), and one pack of Small Polycarbonate Center Cylinders, Transparent plastic, Closed grinding prevents cross-contam

Diffuser Used for the manual filling of Liquid Nitrogen using Short Cryogenic Transfer Hose (4 ft (1.2 m)) or Long Cryogenic Transfer Hose 6 ft (1.8m)

Shatterbox Drive Belt, 4 required.

Delrin End Cap with Tungsten Carbide Insert. Replacement Delrin End Cap with Tungsten Carbide Insert for Tungsten Carbide Lined Grinding Vial Set, 5 mL

Tungsten Carbide Insert, Replacement, for end cap in Tungsten Carbide Lined Grinding Vial Set, 5 mL

UltraBind 150 g. UltraBind Specially formulatedpowder with a particle size of less than 20 um, Combines the moisture resistance of Paraffin Binder along with the ease of removing a prepared disk from the die set associated with the Cellulose Binder, bon

Cellulose Binder 20 um 450 g. Cellulose Binder, with a particle size of less than 20 um, Ideal for samples which crumble or ablate after pressing, Blends quickly and completely with samples at 10-25% by weight toform XRF sample disks, Bonds 600-750 sample

Cellulose Binder 150 g. Cellulose Binder, Particle Size: /= 20, Ideal for samples which crumble or ablate after pressing, Can be blended with sample at 10% by weight to form XRF sample disk, or used undiluted as sample matrix with Sleeve-and-Plunger Set,

X-Press 35-Ton Automated 230V/50Hz. X-Press 35-Ton Automated, Voltage: 230V/50Hz, Platen Size: 3.25 inch (8 cm) diameter, Daylight: Adjustable 2.0 to 6.0 inches (5 to 15 cm), Screw Adjustment: 3.5 inches (9 cm), Dimensions 20.0 in. (50.8 cm) high x 13.0

Carver hydraulic laboratory pellet press/Manual, Full-size 12-ton (10.9 metric ton), accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, an

Spec-Caps 30mm. Spec-Caps Shallow, thin-walled aluminum cap for reinforcing XRF pellets, witrh Painted outer surface, Minimizes contamination during sample handling, Protects the bore of the pellet die from abrasive samples, Compatible with 31mm Evacuab

Spec-Caps Pre-Flared 31 mm x 8 mm. Spec-Caps Pre-Flared, hallow, thin-walled aluminum cap for reinforcing XRF pellets, Prevents sample loss and pellet jamming, Reinforces sample disks to resist chipping and breaking, Minimizes contamination during sampl

Spec-Caps Pre-Flared 31 mm x 8 mm. Spec-Caps Pre-Flared, hallow, thin-walled aluminum cap for reinforcing XRF pellets, Prevents sample loss and pellet jamming, Reinforces sample disks to resist chipping and breaking, Minimizes contamination during sampl

Spec-Caps 30mm. Spec-Caps Shallow, thin-walled aluminum cap for reinforcing XRF pellets, witrh Painted outer surface, Minimizes contamination during sample handling, Protects the bore of the pellet die from abrasive samples, Compatible with 31mm Evacuab

Edge-Flaring Tool (30 mm and 40 mm). Tool for flaring the edge of Spec-Caps to create a tighter fit in the pellet die. Simply press the tapered end of the Edge-Flaring Tool into the compatible Spec-Cap, Increases the Spec-Cap rim diameter to 31 mm or 4

Spec-Caps 38mm. Spec-Caps Shallow, thin-walled aluminum cap for reinforcing XRF pellets, witrh Painted outer surface, Minimizes contamination during sample handling, Protects the bore of the pellet die from abrasive samples, Compatible with 40mm Evacuab

Spec-Caps 38mm. Spec-Caps Shallow, thin-walled aluminum cap for reinforcing XRF pellets, witrh Painted outer surface, Minimizes contamination during sample handling, Protects the bore of the pellet die from abrasive samples, Compatible with 40mm Evacuab

Sleeve-and-Plunger Set for Evacuable Pellet Die Set 35mm. Sleeve-and-Plunger Set, Ideal for smaller amounts (1 g) of analyte, Used with 35mm Evacuable Pellet Die Set and any PrepAid sample binder, Allows easy preparation of XRF disks with binder matrix

Pellet steel 35mm. Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be

Pellet Tungsten Carbide 35mm. Pellet Tungsten Carbide, Replacement or spare 35mm polished, for Evacuable Pellet Die Set, Ideal for routine pressing of abrasive materials, Harder than steel pellets, Polished face of pellet ensures a flat analytical surface

Evacuable Pellet Die Set 35 mm. Evacuable Pellet Die Set, Ideal for pressing sample disks for XRF analysis, Load limit: 50 tons (45.4 metric tons), includes evacuable die body, base, plunger, two 35 mm polished steel pellets, O-ring vacuum seals and knock

Spec-Caps 33mm. Spec-Caps Shallow, thin-walled aluminum cap for reinforcing XRF pellets, witrh Painted outer surface, Minimizes contamination during sample handling, Protects the bore of the pellet die from abrasive samples, Compatible with 35mm Evacuab

Spec-Caps 33mm. Spec-Caps Shallow, thin-walled aluminum cap for reinforcing XRF pellets, witrh Painted outer surface, Minimizes contamination during sample handling, Protects the bore of the pellet die from abrasive samples, Compatible with 35mm Evacuab

Sleeve-and-Plunger Set 40 mm. Sleeve-and-Plunger Set, used with Evacuable Pellet Die Set and any PrepAid sample binder. Instructions included, Allows easy preparation of XRF disks with binder matrix supporting a layer of sample, prevents damage, Ideal fo

Pellet steel 40mm. Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be

Pellet Tungsten Carbide 40mm. Pellet Tungsten Carbide, Replacement or spare 40 mm polished, for Evacuable Pellet Die Set, Ideal for routine pressing of abrasive materials, Harder than steel pellets, Polished face of pellet ensures a flat analytical surfac

Evacuable Pellet Die Set 40mm. Evacuable Pellet Die Set, Ideal for pressing KBr disks for IR analysis, Set includes evacuable die body, base, plunger, two 40 mm polished steel pellets, O-ring vacuum seals and knock-out ring for sample disk extraction, Loa

Pellet steel 13mm. Pellet steel, polished for use with Evacuable Pellet Die Set, Polished face of pellet ensures a flat analytical surface on thesample disk, Made with a close tolerance and sharp edges so that sample powderwill not feather into the gap be

Evacuable Pellet Die Set 13 mm. Evacuable Pellet Die Set, Ideal for pressing KBr disks for IR analysis, includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction, Load

X-CELL 31mm Universal Closed. X-CELL Universal Closed, Disposable X-ray cell used for running of liquid samples in XRF spectrometers, Includes a polyethylene snap-ring and cup with snap-post vent and reservoir, Material: PE, Aperture: 24.5mm, Capacity:

X-CELL 31 mm Closed. X-CELL Closed, Disposable X-ray cell used for running of liquid samples in XRF spectrometers, Includes a polyethylene snap-ring and cup with snap-post vent and reservoir, Material: Polyethylene, Aperture: 24.5mm, Capacity: 8ml, Over

X-CELL 31 mm Closed. X-CELL Closed, Disposable X-ray cell used for running of liquid samples in XRF spectrometers, Includes a polyethylene snap-ring and cup with snap-post vent and reservoir, Material: Polyethylene, Aperture: 24.5mm, Capacity: 8ml, Over

X-CELL 40 mm Closed. X-CELL Closed, Disposable X-ray cell used for running of liquid samples in XRF spectrometers, Includes a polyethylene snap-ring and cup with snap-post vent and reservoir, Material: Polyethylene, Aperture: 31.5mm, Capacity: 13ml, Ove

Bubble-Free Insert Polyethylene 40 mm. Bubble-Free Insert for 40 mm Closed X-Cell, Material: Polyethylene, To assemble, simply push Forms an inverted-cone shelf under which air bubbles can be trapped once the cell is filled and sealed, partially filled, D

Bubble-Free Insert Polyethylene 40 mm. Bubble-Free Insert for 40 mm Closed X-Cell, Material: Polyethylene, To assemble, simply push Forms an inverted-cone shelf under which air bubbles can be trapped once the cell is filled and sealed, partially filled, D

X-CELL 40 mm Closed. X-CELL Closed, Disposable X-ray cell used for running of liquid samples in XRF spectrometers, Includes a polyethylene snap-ring and cup with snap-post vent and reservoir, Material Polyethylene, Aperture: 31.5mm, Capacity: 13ml, Over

Ultralene Thin Film (Roll) 2 7/8 in (73 mm). Ultralene Thin Film (Roll), Window, for XRF liquid sample cup, Thickness: 0.16 mil (4 um), Heat resistant up to 100 deg C, Box has a serrated edge for tearing thin window film to desired length, Dimension: 2

Thin Film (Roll) Polypropylene 0.2mil 2 7/8in. Thin Film (Roll), Material: Polypropylene, Width: 2 7/8in, Thickness: 0.2mil, window film for XRF liquid sample cups, Heat resistant up to 100 degree C, Reasonably resistant to acids, bases, and many organic

Vial Polycarbonate with Slip-On Cap 5 mL. Vial Polycarbonate with Slip-On polyethylene Cap, mixing/grinding load: 2 mL, Suitable for slurry grinding, Typical composition: Major Element - C, Hardness: Mohs 1 1/2, Dimension: 50.8 mm (Length), 12.7 mm (Diame

Grinding Vial with Slip-On Cap 5 mL. Grinding Vial with Slip-On Cap, Material: Polystyrene, polyethylene cap, mixing/grinding load: 2 mL, Suitable for slurry grinding, Typical composition: Major Element - C, Hardness: Mohs 1 1/2, Dimension: 12.7 mm (Diame

Grinding Ball 1/4 in (6.35 mm). Grinding Ball, Replacement, High durability and efficiency with moderate resistance to abrasion, Resists chemical attack, Typical composition: Major Elements - Fe, Cr; Minor Elements - Ni, Mn, S, Si, Made of type 440C stain

Ball Steel 1/4in.

Grinding Vial Set Stainless Steel 2.5mL. Grinding Vial Set, stainless steel, Resists chemical attack, Suitable for slurry grinding, High Durable, tough, and suitable for general-purpose grinding in the 5100 Mixer/Mill, Hardness: Mohs 5-5 1/2, Rockwell-C 5

Methacrylate Grinding Ball 3/8 in. Methacrylate Grinding Ball, Disposable, ideal for pulverizing soft, brittle materials and for mixing powders, Typical composition: Major Element - C, Hardness: Mohs 1 1/2, Compatible with all SPEX SamplePrep plastic grin

Grinding Vial with Slip-On Cap 2.5 mL. Grinding Vial with Slip-On Cap, Material: Polystyrene, Sample Capacity - Grinding/Mixing: 1ml, Hardness: Mohs 1 1/2, Vial is 1/2 in. Diameter x 1 in. Long (12.7x25.4mm), Disposable grinding vial ideal for pulverizing

Cryo-Block for 48 Microcentrifuge or PCR Tube. Cryo-Block, Aluminum block holds 48 standard (1.5 - 2mL) microcentrifuge or PCR tube, Enables high-throughput cryogenic grinding in the Geno/Grinder, Increases yields by grinding samples at sub-zero temperatu

Cryo-Block for 96 Microcentrifuge or PCR Tube. Cryo-Block, Aluminum block holds 96 standard (0.6 mL) microcentrifuge or PCR tube, Enables high-throughput cryogenic grinding in the Geno/Grinder, Increases yields by grinding samples at sub-zero temperatures

Cryo-Block for 50mL Polycarbonate Cryovial. Cryo-Block, Aluminum block holds 6 - 50mL Polycarbonate Cryovial, Enables high-throughput cryogenic grinding in the Geno/Grinder, Increases yields by grinding samples at sub-zero temperatures, Preserves pesticid

Cryo-Block for 5 mL Polyethylene Vial. Cryo-Block, Aluminum block holds 24 - 5 mL Polyethylene Vial, Enables high-throughput cryogenic grinding in the Geno/Grinder, Increases yields by grinding samples at sub-zero temperatures, Preserves pesticides, RNA f

Cryo-Block for 5 mL Polycarbonate Vial. Cryo-Block, Aluminum block holds 24 - 5 mL Polycarbonate Vial, Enables high-throughput cryogenic grinding in the Geno/Grinder, Increases yields by grinding samples at sub-zero temperatures, Preserves pesticides, RNA

Cryo-Block for 15 mL Polycarbonate Vial. Cryo-Block, Aluminum block holds 15 - Polycarbonate Vial- 15 mL, Enables high-throughput cryogenic grinding in the Geno/Grinder, Increases yields by grinding samples at sub-zero temperatures, Preserves pesticides,

Cryo-Block for 15 mL Short PC Vial. Cryo-Block, Aluminum block holds 6 - 15 mL Short Polycarbonate Vial (6), Enables high-throughput cryogenic grinding in the Geno/Grinder, Increases yields by grinding samples at sub-zero temperatures, Preserves pesticide

Cryo-Adapter for 96 - Well Titer Plate, round, with Extruded aluminum insert, Cryo-Blocks are chilled in Cryo-station, and then used for high-throughput cryogenic grinding in the Geno/Grinder, Increases yields by gr

Cryo-Station for temperature sensitive sample. Cryo-Station holds temperature sensitive sample that are chilled for cryogenic grinding or to preserve pesticides, for extraction, with insulated jacket, Includes cutting board, Reaches liquid nitrogen temper

Cap-Mat for Rectangular 48 - Well Titer Plate. Cap-Mat specifically designed for Rectangular, 48 - Well Titer Plate, Sealing mat, Tightly seals, Prevents spills and well-to-well contamination, sterilized and reused, Made of rugged silicone rubber

Cap-Mat for Rectangular 48 - Well Titer Plate. Cap-Mat specifically designed for Rectangular, 48 - Well Titer Plate, Sealing mat, Tightly seals, Prevents spills and well-to-well contamination, Made of rugged silicone rubber, sterilized and reused

Titer Plate 48 - Rectangular Well. Titer Plate 48 - Well Rectangular, Deep, well has a volume of 5 mL and a working volume of 2 mL, Alphanumeric marks for well identification, Durable polypropylene construction, Process 96 samples at a time by running two

Titer Plate 48 - Rectangular Well. Titer Plate 48 - Well Rectangular, Deep, well has a volume of 5 mL and a working volume of 2 mL, Alphanumeric marks for well identification, Durable polypropylene construction, Process 96 samples at a time by running two

Foam Holder for 15 mL Centrifuge Tubes, Thick, rugged polyethylene foam block holds 24 standard 15 mL centrifuge tubes that are 119 mm in length, Ideal for grinding large samples in the Geno/Grinder, Compatible with

Foam Holder for 50 mL Centrifuge Tubes, Thick, rugged polyethylene foam block holds 16 standard 50 mL centrifuge tubes that are 115 mm in length, Ideal for grinding large samples in the Geno/Grinder, Compatible with

Geno/Grinder 230V/50Hz CE Approved. Geno/Grinder is an automated high-throughput plant & animal tissue homogenizer and cell lyser, Voltage: 230V/50Hz, Power Cord: 3-prong standard North American plug, CE Approved, Features: LCD screen displays, Dimensio

Geno/Grinder 115V/60Hz CE Approved. Geno/Grinder is an automated high-throughput plant & animal tissue homogenizer and cell lyser, Voltage: 115V/60Hz, Power Cord: 3-prong standard North American plug, CE Approved, Features: LCD screen displays, Dimensio

Cryo-Block for 15 mL Centrifuge Tube. Cryo-Block, Material: Aluminum, for the MiniG that holds fifteen 15 mL round-bottom centrifuge tubes

Cryoblock for MiniG 5 mL. Cryoblock for MiniG, Lightweight, for 5 ml vials with a hollow base and a lid to help the samples maintain cold temperature during processing

Cryoblock for MiniG 2 mL. Cryoblock for MiniG, Lightweight, for 2 ml vials with a hollow base and a lid to help the samples maintain cold temperature during processing

MiniG- Automated Tissue Homogenizer and Cell Lyser. MiniG - Automated Tissue Homogenizer and Cell Lyser, Voltage: 115V / 60Hz or 230V / 50Hz, Motor 1/7 HP, Power Cord 3-prong grounded plug-115V / 60Hz.2-prong european cord for 230V / 50Hz, Dimension: 2

Foam Block 5mL Rugged that holds 24 standard 5mL tubes.

Foam Block 2mL used in the 1690 adjustable clamp for the 1600 MiniG.

Accessories for Bead Ruptor 24 Bead Mill Homogenizer, Omni International - 19-8005, Bead Ruptor Cryo Cooling Unit

Manual Heavy Duty Stand 99 cm -145 cm (39in- 57in). Manual Heavy Duty Stand, Material: Carbon steel, painted, Vessel: 122 cm (48in) maximum diameter, Includes: Portable heavy duty stand, includes four swivel casters, two with brakes, Easily move mixer without dismounting, Size: 99 cm -145 cm

Plate Mount 260 mm x 100 mm x 6.4 mm (10in x 4in x 1/4in). Plate Mount, Material: Electropolished 304 stainless steel, Weight: 1.3 kg (2.8 lb), Includes: Plate mount. Includes plate, four mounting bolts, four flat washers, four split lock washers, and hex key, Dimension: 260 mm x 100 mm x 6.4 mm

Propeller & Shaft 152 mm. Propeller & Shaft, Blade Material: Polished 316L stainless steel, Shaft Length: 914 mm (36in), Shaft Diameter: 13 mm (1/2in), Flow Pattern: Axial, Pitched blade propeller 152 mm (6in) diameter, welded to 914 mm (36in) shaft, Use with: 1540 mixer, esirable for pharmaceutical

Crossover Industrial Mixer, Caframo - A354, Three-Bladed Propeller and Shaft

Chuck Key Only, Material 420 stainless steel, Multipurpose Tool Chuck key and 3 mm hex tool in one, Dimensions 132 mm x 70mm, Weight 160 g (5.6 oz), High strength and high wear resistance, includes hex tool for chuck installation, Chuck key and 3 mm hex tool provided for installation

Chuck Set, Material 420 stainless steel, Impeller Shaft Diameters Adjustable to 15.9 mm (Gin), Fits Motor Shaft 24.8 mm (0.98GC|), Multipurpose Tool Chuck key and 3 mm hex tool in one, Weight 1.1 kg, High strength and high wear resistance, includes set screw and hex tool for installation

Chuck Shaft Guard, Material: Polycarbonate ABS, Fasteners 3 mm hex bolts, Length 200 mm (7.9GC|), three 3 mm hex bolts, and hex key, Protects operators from moving parts, Easy to clean, Use with: Included with 1540 mixer, compatible with the bolts included for simple installation

C-Clamp Set, Material Cast 304 stainless steel, electropolished, Angle Positioning Bolt Compatible with 19 mm (3/4in) wrench, C-Clamp Adjustment Screw Compatible with a 22 mm (GPin) wrench, Includes C-clamp, clamp adaptor, four mounting bolts, four split and lock washers, and hex key

Garnet Beads Bulk 0.7mm. Garnet Beads Bulk, RNase and DNase Free, Recommended for soil, clay, sediment, waste water and feces, Diameter: 0.7mm, Quantity: 500 g

New Brunswick Innova42R Stackable or benchtop incubator shaker 2.5 cm. New Brunswick Innova42R Stackable or benchtop incubator shaker, Cast iron triple-eccentric counterbalanced drive, Programmable, Large viewing window/ internal light, Built-in water

Saw-Tooth Multi-Prep Probes 7mm. Open-Slotted Multi-Prep Probe, For homogenizing multiple samples, Durable 7mm open-slotted tooth design, Ideal for soft and liquid base samples, Advantages over plastic probes/tip, saw-teeth design manufactured from superior 316 stainless steel and PTFE

Saw-Tooth Multi-Prep Probes 10mm. Saw-Tooth Multi-Prep Probe, For homogenizing multiple samples, Durable 10mm saw-tooth design, Ideal for sample types, liquid to tough, Advantages over plastic probes/tip, saw-teeth design manufactured from superior 316 stainless steel and PTFE

Spider Tube Rack, Used with the Multi-Prep Homogenizer System, Accommodates 50ml conical tubes.

Spider Tube Rack, for Multi-Prep Homogenizer System, accomodates conical tube sizes 5-15ml.

Multi-Prep Rapid Homogenizer 220 Volts 50/60 Hz. Multi-Prep Rapid Homogenizer, 220 Volts 50/60 Hz, Speed Control: 2000 - 18000 RPM, Power: 805 Watts, Sample volume Minimum: 2ml for 7mm Probe/3ml for 10mm Probe, Noise rating: 68 dB, Dimensions: 10.6 X 14.6 X 14.5 inch, 60 oscillations per minute

Multi-Prep Rapid Homogenizer 120 Volts 50/60 Hz. Multi-Prep Rapid Homogenizer, 120 Volts 50/60 Hz, Speed Control: 2000 - 18000 RPM, Power: 805 Watts, Sample volume Minimum: 2ml for 7mm Probe/3ml for 10mm Probe, Noise rating: 68 dB, Dimensions: 10.6 X 14.6 X 14.5 inch, 60 oscillations per minute

VWR bead mill homogenizer is specifically designed for grinding, lysing, and homogenization of biological samples. Ideal solution for extraction of nucleic acids, proteins and small molecules from the toughest samples. Compatible wtih 0.5 mL, 2 mL and 7mL tubes

Generator Probes and Replacement Components, Replacement Lower Flanged Bearing, 20 mm, PTFE, Pack of 2

Generator Probes and Replacement Components, Replacement Lower Flanged Bearing, 10 mm, PTFE, Pack of 2

Generator Probes and Replacement Components, Replacement Upper Washer, PTFE, Pack of 5

Generator Probes and Replacement Components, Replacement Lower Sleeve Bearing, 7 mm, PTFE, Pack of 2

Generator Probes and Replacement Components, Replacement Lower Sleeve Bearing, 5 mm, PTFE, Pack of 2

Generator Probes and Replacement Components, Replacement Bearing, GenPk. Pack of 6

Generator Probes and Replacement Components, Replacement Lower Flanged Bearing, 30 mm, PTFE, Pack of 2

Bead Ruptor Pre-Filled Bead Tubes, 2 ml, Omni International - 19-621, Micro-Organism Lysing Mix, with 0.1 mm Glass Beads

Bead Ruptor Pre-Filled Bead Tubes, 2 ml, Omni International - 19-623, Hard & Fibrous Mix with 0.15 mm Garnet Beads

Con-Torque Tissue Homogenizer 115V. Con-Torque Tissue Homogenizer, Stirrer Speed: 0 - 400 rpm, Maximum Torque: 196 oz-in, Electrical: 115V at 50/60Hz, with power unit, chucking device and universal support, with integral clamp fits on support rods, Dimension (with stand): 15in x 13.5in x 35 in

Accessories for Omni Tissue Master 125 Handheld Homogenizer, Omni International - F2107-10, Tissue Master 10 mm Probe

Accessories for Omni Tissue Master 125 Handheld Homogenizer, Omni International - F2107-07, Tissue Master 7 mm Probe

Accessories for Omni Tissue Master 125 Handheld Homogenizer, Omni International - F2107-05, Tissue Master 5 mm Probe

Accessories for Omni Tissue Master 125 Handheld Homogenizer, Omni International - 62810, Tissue Master Motor Brush

Accessories for Omni Tissue Master 125 Handheld Homogenizer, Omni International - F22000, Tissue Master Stand Assembly

Tough Micro-Organism Lysing Vk05 kit, is made with inert 0.5mm glass beads, It is designed for tough micro-organism lysing like yeast, fungi, cyanobacteria, phytoplankton, contains 25 preps of 15mL, ready-to-use with the Precellys Evolution homogenizer

Stainless Steel Container with Lid. 1L container. For use with single-speed, two-speed, and seven-speed Waring laboratory blenders.

Seward Stomacher Mark II Lab Blenders. Model: 3500. 110V, 60Hz, 90W. 48.3Lx48.3Wx44.5Hcm. Mixing Capacity: 1000-3500ml. For large volumes. Paddles compress sample w/ controlled pressure. Microprocessor controls, preset mixing speeds and time settings, continuous cycle. Contamination free.

Strainer bag. For Seward Stomacher 400 (58976-916, -960). Working Volume: 80-400mL. Features 65um thick polyethylene. Inner plastic mesh bag retains sample, prevents puncturing of the bag. Gamma irradiated to ensure sterility.

Closure bags. For Seward Stomacher 400 (58976-916, -960). Made of 65um thick polyethylene. Features a wire closure strip across the top and rounded corners. Gamma irradiated. Working volume is 80-400mL.

Seward Stomacher Mark II Lab Blenders. Model: 400C. 110V, 60Hz, 170W. 33.7Lx33.7Wx27.9Hcm. Mixing Capacity: 80-400mL. Paddles compress sample w/ controlled pressure. Microprocessor controls, preset mixing speeds and time settings. One-touch, user-programmable functions. Contamination free.

Seward Stomacher Mark II Lab Blenders. Model: 80 Biomaster. 110V, 60Hz, 75W. 32.3Lx29.2Wx19.1Hcm. Mixing Capacity: 5-80ml. Paddles compress sample w/ controlled pressure. Microprocessor controls, preset mixing speeds and time settings, continuous cycle. Space-saving. Contamination free.

POLYTRON PT 1300D Handheld Homogenizer. 220V, 50Hz. 100W motor. Digital speed control up to 30,000rpm. Breaks down plant and animal tissue, prepares emulsions and samples for titrations, and extracts pesticides from soil samples. EasyCare generators (required for operation) sold separately.

POLYTRON PT 1300D Handheld Homogenizer. 110V, 60Hz. 100W motor. Digital speed control 7,000 to 30,000rpm. Breaks down plant and animal tissue, prepares emulsions and samples for titrations, and extracts pesticides from soil samples. EasyCare generators (required for operation) sold separately.

Standard Universal Homogenizer. Package Includes: (1) 120V Bio-Gen PRO200 homogenizer, (1) 7x75mm flat-bottom generator probe and (1) 10x115mm saw tooth generator probe.Sliding variable speed control switch clicks back in forth in to place to select your ideal homogenizing speed.

Deluxe Universal Homogenizer. Package Includes: (1) 120V Bio-Gen PRO200 homogenizer, (1) Stand Assembly (1) 7x75mm flat-bottom generator probe and (1) 10x115mm saw tooth generator probe. ideal homogenizing speed.

Standard Micro Homogenizer Package. Includes Bio-Gen PRO200 Homogenizer, 5x75mm PRO Quick Connect Generator Probe, 120V.

Premium MULTI-GEN 7XL Homogenizer. Package Includes PRO200 Homogenizer, Adapter and One 12-Pack of MULTI-GEN 7XL Generator Probes, 120V. Ideal homogenizing speed.

Premium Micro Homogenizer Package. Includes: (1) 120V Bio-Gen PRO200 homogenizer, (1) Stand Assembly, (1) 5x75mm flat-bottom generator probe and (1) 7x75mm saw tooth generator probe. Ideal for homogenizing inside 0.5ml, 1.5ml or 2ml microcentrifuge tubes.

Standard MaX-Homogenizing Package. Includes: (1) 120V Bio-Gen PRO200 homogenizer and (1) 10x115mm flat-bottom generator probe. Volumes as small as 0.25ml and up to 30ml can be easily processed.

Deluxe Micro Homogenizer Package with PRO200 and 5x75mm/7x75mm Generator Probes 120V.

Multi-Gen 7 Motor Unit Adapter for Homogenizer Generators.

Quick Connect Open Slotted Tooth Homogenizer Generator Probe, 30x200mm, Stainless Steel.

Quick Connect Saw Tooth Homogenizer Generator Probe, O.D.xLength: 20x115mm, Stainless Steel.

Quick Connect Saw Tooth Homogenizer Generator Probe, O.D.xLength: 10x115mm, Stainless Steel.

Quick Connect Saw Tooth Homogenizer Generator Probe, O.D.xLength: 7x95mm, Stainless Steel.

Quick Connect Flat Bottom Homogenizer Generator Probe, O.DxLength: 5x75mm, Stainless Steel.

Handheld Homogenizer. PRO250 Speed Range: 10000 to 30, 000rpm, 3/4-horsepower, 120V motor handles features 6-speed selectable variable speed control. Homogenize samples with volumes as small as 0.03ml or as large as 5-Liters. Optional stand assemblies are available.

Handheld Homogenizer. PRO200 Speed Range: 5, 000 to 35, 000rpm, Homogenize samples with volumes as small as 0.03ml or as large as 1-Liter, High-torque motor. 120V, 50/60Hz. Optional stand assembly is available for hands-free homogenizing.

Homogenizer. BeadBlaster 24 place Microtube Homogenizer, 100V to 240V, Fast, efficient homogenization in about 35 seconds, For all sample types, from soft tissue to boneHigh throughput - up to 24 samples

Tubes with Stainless Steel Beads, 2.8mm Acid Washed, 2.0ml.

Starter Kit, Triple-Pure Zirconium Beads, for BeadBug Microtube Homogenizer.

High Impact Zirconium Bead. Triple-Pure, High Impact Zirconium Beads, 3.0mm, Product Type: Microtube Homogenizer Tube Kit, Includes: Prefilled 2.0ml Non-Skirted Screw Cap tubes with caps and sealing rings.

High Impact Zirconium Bead. Triple-Pure, High Impact Zirconium Beads, 1.5mm, Product Type: Microtube Homogenizer Tube Kit, Includes: Prefilled 2.0ml Non-Skirted Screw Cap tubes with caps and sealing rings.

High Impact Zirconium Bead. Triple-Pure, High Impact Zirconium Beads, 1.0mm, Product Type: Microtube Homogenizer Tube Kit, Includes: Prefilled 2.0ml Non-Skirted Screw Cap tubes with caps and sealing rings.

High Impact Zirconium Bead. Triple-Pure, High Impact Zirconium Beads, 0.5mm, Product Type: Microtube Homogenizer Tube Kit, Includes: Prefilled 2.0ml Non-Skirted Screw Cap tubes with caps and sealing rings.

High Impact Zirconium Bead. Triple-Pure, High Impact Zirconium Beads, 0.1mm, Product Type: Microtube Homogenizer Tube Kit, Includes: Prefilled 2.0ml Non-Skirted Screw Cap tubes with caps and sealing rings.

Tube empty pack cap.

Silica Glass Beads, 1.0mm (Acid Washed), Product Type: Microtube Homogenizer Tube Kit, Includes: Prefilled 2.0ml Non-Skirted Screw Cap tubes with caps and sealing rings.

Silica Glass Beads, 0.5mm (Acid Washed), Product Type: Microtube Homogenizer Tube Kit, Includes: Prefilled 2.0ml Non-Skirted Screw Cap tubes with caps and sealing rings.

Silica Glass Beads, 0.1mm (Acid Washed), Product Type: Microtube Homogenizer Tube Kit, Includes: Prefilled 2.0ml Non-Skirted Screw Cap tubes with caps and sealing rings.

Beadbug microtube homogenizer.

Beadbug microtube homogenizer.

Handheld Homogenizer, 115V or 230V, Homogenize most samples in under 30 seconds, For volumes from 100l to 250 mL, Supplied with both 5mm and 7mm generator probes

Pestle, 1.5mL, pack100.

Pestle, 0.5mL, pack100.

Homogenizer. Handheld, Kinematica Polytron, PT 1200 E, Ergonomic design, 115V

BeadBug Microtube homogenizer, Electrical: 115v, Speed: 2800 to 4000rpm, Maximum capacity: 3x2ml, Dimension: 6.9x8.3x5.3in, Extremely powerful mixing action, for lysis, grinding or homogenization,

Homogenizer. The BeadBug is a high energy microtube homogenizer for processing up to three 2. 0ml tubes simultaneously. Optimized, high speed mixing motion causes rapid cell disruption through impact with microbeads. Fast and efficient, most samples are homogenized in 45 seconds or less.

Deluxe Quantitative Stirling Engine - 1002594, Deluxe Quantitative Stirling Engine

Empty Tube Kit,with caps and sealing rings,Screw cap 2.0ml polypropylene tubes, empty, for use with bead homogenizers, pack of 1000. 7 x 4 x 4inch.Used with BeadBlaster 24 ( BR19-00 and BR19-01) and BeadBug (BR16-00 and BR16-00-220) Microtube Homog

Stand. Storage and Mounting Stand for D1000 Hand Held Homogenizer.6 x 30.5 x 21mm,stand helps to save benchtop space and provides a convenient place to sterilize and store the D1000 between uses

Generator Head, 7mm x 50mm, saw tooth, for use in microtubes. Fits D1000 hand held homogenizer. Pack of 5.

Generator Head, 5mm x 50mm, for use in microtubes. Fits D1000 hand held homogenizer. Pack of 5.

Generator Head, 14mm x 130mm, saw tooth, for 50-250ml vessels. For use with D1000 hand held homogenizer.

Generator Head, 10mm x 115mm, saw tooth, for 15ml and 50ml tubes. For use with D1000 hand held homoenizer.

Laboratory Blender/Mixer - 700G

Hard Metal Cutting Beater. An accessory for the A11 Analytical Grinding Mill (33998-408). For substances with a Mohs hardness up to 9.

Grinding Chamber with Lid. Replacement grinding/reduction chamber, for use with the Universal Grinding Mill (33998-050, -048).

Tissue Grinders with PYREX® Glass Pestles, Corning® - 7724-15, 15 ml

Tissue Grinders with PYREX® Glass Pestles, Corning® - 7724-3, 3 ml

PYREX 45mL Potter-Elvehjem Tissue Grinder with PTFE Pestle.

PYREX 17mL Potter-Elvehjem Tissue Grinder with PTFE Pestle.

PYREX 8mL Potter-Elvehjem Tissue Grinder with PTFE Pestle.

PYREX 3mL Potter-Elvehjem Tissue Grinder with PTFE Pestle.

PYREX 1mL PTFE Pestle Tissue Grinder with Steel Shaft.

Molecular Biology Grade Zirconium Beads. Grinding media for VWR Signature Pulsing Vortex Mixers (12620-862, -864). DNase/RNase-free. For preparing samples for molecular biology applications and preparing cells for real time PCR. Size: 200u. PCR patented by Hoffmann-La Roche; requires license.

Acid Washed Zirconium Beads. Grinding media for VWR Signature Pulsing Vortex Mixers (12620-862, -864). Ideal for disrupting fungi, molds, yeast, and bacterial spores. Size: 200u.

Low Protein Binding Silica Beads. Grinding media for VWR Signature Pulsing Vortex Mixers (12620-862, -864). Useful for homogenizing samples for protein analysis and for high protein recovery. Size: 400u.

Acid Washed Silica Beads. Grinding media for VWR Signature Pulsing Vortex Mixers (12620-862, -864). Ideal for disrupting fungi, molds, yeast, and bacterial spores. Size: 400u.

Low Protein Binding Silica/Glass Beads. Grinding media for VWR Signature Pulsing Vortex Mixers (12620-862, -864). Useful for homogenizing samples for protein analysis and for high protein recovery. Size: 800u.

Molecular Biology Grade Silica/Glass Beads. Grinding media for VWR Signature Pulsing Vortex Mixers (12620-862, -864). Treated to be DNase/RNase-free and useful for preparing samples for molecular biology applications. Size: 800u.

Acid Washed Silica/Glass Beads. Grinding media for VWR Signature Pulsing Vortex Mixers (12620-862, -864). Ideal for disrupting fungi, molds, yeast, and bacterial spores. Size: 800u.

Bag. Media bag, Insterprep Sachet, Instantly soluble, pre-weighed, sterile, Fraser Broth media comes with the correct amount of granular media, ready for instant use. Simply add Insterprep sachet, sterile distilled water and sample as per protocol. Manufactured to ISO standards

Bag. Media bag, Insterprep Sachet, Instantly soluble, pre-weighed, sterile, Fraser Broth media comes with the correct amount of granular media, ready for instant use. Simply add Insterprep sachet, sterile distilled water and sample as per protocol. Manufactured to ISO standards

Bag. Media bag, Insterprep Sachet, Instantly soluble, pre-weighed, sterile, Buffered Peptone Water media comes with the correct amount of granular media, ready for instant use. Simply add Insterprep sachet, sterile distilled water and sample as per protocol. Manufactured to ISO standards

Bag. Media bag, Insterprep Sachet, Instantly soluble, pre-weighed, sterile, Buffered Peptone Water media comes with the correct amount of granular media, ready for instant use. Simply add Insterprep sachet, sterile distilled water and sample as per protocol. Manufactured to ISO standards

Tube. Ceramic Prefilled 2.8 Mm, 50Ml Conical Polypropylene Screw Cap Tube. Pre-Filled With Lysing Matrix. For Use On Omni International Bead Ruptor 24. Bead Beating Tubes Are Designed To Withstand The High Forces Generated On The Bead Ruptor Bead Mill.

Tube. Ceramic Prefilled 2.8 Mm, 30ml Conical Polypropylene Screw Cap Tube. Pre-Filled With Lysing Matrix. For Use On Omni International Bead Ruptor 24. Bead Beating Tubes Are Designed To Withstand The High Forces Generated On The Bead Ruptor Bead Mill.

Homogenizer. OmniI Micro Homogenizer is a hand-held battery powered rotor-stator homogenizer designed for use inside or outside of a laboratory setting. The Micro Homogenizer is powered by a 12 volt lithium ion battery, Processing Range: 200uL-100 mL, Power Rating: 35 watt, 10, 000 to 30, 000 rpm

Homogenizer. Mixer Homogenizer, Processing Range: 0.25mL-10L, 600watt, 500-20, 000rpm, Dimension: H(with stand)24X10W inch, stainless steel generator probes ranging in diameter from 7 mm to 35 mm and glass, plastic chambers from 13 mL to 1360 mL with sealed generator probes or blades, 68 db

Homogenizer. Macro Homogenizer, Processing Range: 0.25mL-30L, Blade Assemblies: 1 and 2 inch in sealed chambers from 13 mL to 1360 mL, 1800watt, 1, 000-20, 000rpm, Dimension: H(with stand)24X10W inch, stainless steel generator probes ranging in diameter from 7 mm to 55 mm, 68 db

Chamber Assembly with 10mm Probe, stainless steel, Includes 10mm x 95mm generator probe, 15mL-50mL operating capacity, Sealing gasket made of Neoprene, Ideal for fibrous tissue and for pre processing to reduce sample particle size to 1-2 microns, Compatible with Homogenizers, 50ml

Chamber Assembly, Stainless steel, 2 inch cutting blade assembly and PTFE bearings, 90mL-400mL operating capacity, Interchangeable 20mm x 100mm generator probe, Ideal for fibrous tissue and for pre-processing to reduce particle size to 10 -15 microns, for Homogenizers, 400ml

Chamber Assembly with 20mm Probe, Stainless steel, Includes 20mm x 100mm(Fine)generator probe, 90mL-450mL operating capacity, Ideal for fibrous tissue and for pre-processing to reduce particle size to 1-2 microns, for Mixer and Macro Homogenizers, 400ml

Digital Multi-Tube Vortexer W/Programmable Pulse Mode. Touchpad Controls W/ Independent Led Displays For Speed & Time.Speed 500 To 2500Rpm.Time 1 Sec To 160 Hrs.3.6Mm Orbit.10Lb Capacity.Includes 50X12Mm Tube Rack.Nist Traceable Iso 17025 Accredited Multi-Point

Heavy-Duty Vortex Mixer. With Touchpad Controls And Independent Led Displays For Speed And Time.Continuous Duty 4.9Mm Orbit.Speed 300-3500.Touch Or Continuous Mode.Incl Rack For 1.5Ml Tubes.Nist Traceable Iso 17025 Accredited Multi-Point Speed And Time Calibration Certificate

Microplate Vortex Mixer. With Touchpad Controls And Independent Led Displays For Speed And Time.Continuous Duty 3.5Mm Orbit.Speed 300-3500.Touch Or Continuous Mode.Incl Microplate Holder & Cuphd.Nist Traceable Iso 17025 Accredited Multi-Point Speed And Time Calibration Certificate

Standard micro-homogenizer. VWRmicro-homogenizing package effectively and efficiently processes liquid and soft samples. volumes as small as 0.03ml can be easily processed. fits into 500ul, 1.5ml, and 2ml micro-tubes. includes: 120v bio-gen 200 homogenizer unit and 5x75mm

Deluxe micro-homogenizer. VWRmicro-homogenizing package provides fast and complete breakdown results for all types of samples. processes volumes as small as 0.03ml. fits into 500ul, 1.5ml, and 2ml micro-tubes. includes: 120v bio-gen 200 homogenizer unit, 5x75mm generator probe

Premium micro-homogenizer. VWRmicro-homogenizing package provides fast & complete results, with a stand for hands free usage. processes volumes as small as 0.03ml. fits into 500ul, 1.5ml,& 2ml microtubes. includes: 120v bio-gen 200 homogenizer unit, 5x75mm generator probe

Multi-gen homogenizer. Vwr multi-gen 7xl homogenizing package is designed for homogenizing of multiple samples without risk of cross contamination and cleaning between samples. probes are made from 316 stainless steel and ptfe. includes: 120v bio-gen 200 homogenizer unit

Standard homoginizer. VWRuniversal homogenizing package can process within 1.5ml-50ml tubes, for all types of samples, even tough or stringy. includes: 120v bio-gen 200 homogenizer unit, 7x75mm saw-tooth generator probe, 10x115mm saw-tooth generator probe.

Deluxe homogenizer. VWRuniversal homogenizing package can process within 1.5ml-50ml tubes, for all types of samples, even tough or stringy with a stand assembly for hands free usage. includes: 120v bio-gen 200 homogenizer unit, 7x75mm and 10x115mm saw-tooth generator probe, 200 stand assembly

Bio-gen hand-held homogenizer. VWRbio-gen 200 homogenizer, 120v has a 144 watt, high-torque motor with a variable speed adjustment from 5000 to 33000 rpm, allowing for quick homogenization with a maximum noise level of only 68 db. for processing within various tube sizes to small beakers

Handheld homogenizer. VWR250 homogenizer combines the power of a 3/4 hp, 576 watt motor with variable speed control from 10000 to 30000 rpm. ideal for processing volumes from 0.03ml to 5l with generator probes from from 5mm to 30mm.

Digital benchtop homogenizer with stand. VWR400d Digital benchtop homogenizer, 120v with led display. compact digital benchtop unit with 576 high watt motor, uses 5mm to 30mm generator probes, and can process samples from 0.03ml to 5l. motorized pro trac stand included.

Digital benchtop homogenizer with stand. VWR400d Digital benchtop homogenizer, 120v with led display. compact digital benchtop unit with 576 high watt motor, uses 5mm to 30mm generator probes, and can process samples from 0.03ml to 5l. motorized pro trac stand included.

Homogenizer stand assembly. VWR200 stand assembly used only for the bio-gen 200 homogenizer unit, 6 x 6 inch padded base.

Homogenizer stand assembly. VWR250 stand assembly used only for the bio-gen 200 homogenizer unit, 6 x 6 inch padded base.

Soft Tissue Homogenizing Mix (2mL Tubes) - 50 Pack. Tubes closed with Screw cover and o-ring. RNAse/DNAse free rocessing range: 300uL - 1.8mL

Hard Tissue Grinding Mix (2mL Tubes) - 50 Pack. Tube 2mL reinforced tubes closed with Screw cover.RNAse/DNAse free Processing range: 300uL - 1.8mL

Tough Micro-Organism Lysing Mix (2mL Tubes) - 50 Pack. Tube 2mL tubes closed with Screw cover and o-ring.RNAse/DNAse free Processing range: 300uL - 1.8mL

Zirconium Ceramic Oxide Bulk Beads 2.8mm. 2.8mm zirconium Oxide beads for use with the Omni Bead Ruptor.325g of beads to fill up to 500x2mL sample tubes

MaX-Homogenizing Package, Standard. VWR 200 MAX HOMOGENIZING PACKAGE IS IDEAL FOR HOMOGENIZING IN VARIOUS TUBE SIZES FROM 10ML TO 50ML FOR ALL TYPES OF SAMPLES. TYPICAL VOLUME RANGE OF 1.5ML TO 30ML CAN BE EFFICIENTLY HOMOGENIZED. INCLUDES: 120V BIO-GEN 200 HOMOGENIZER AND 10X115MM

Hard Tissue Grinding Mix (30mL Tubes) - 50 Pack. Tube 30mL reinforced tubes closed with Screw cover.RNAse/DNAse free Processing range: 300uL - 1.8mL

Stand assembly. VWR 250 stand assembly small footprint used only for the 250 homogenizer unit, 6 x 6 inch padded base.

Adapter. VWR multi-gen adapter for multi-gen 7xl generator probes (required for vwr homogenizer unit & multi-gen generator probe use)

Generator probe. VWR GenPack 12-pack designed for homogenizing of multiple samples without the risk of cross contamination and cleaning between samples. for samples volumes within 1.5ml-50ml tubes. made from 316 stainless steel /PTFE. pack of 12. VWR GenPack adapter sold separately and required to connect GenPack probe to homogenizer motor unit.

Generator probe. VWR flat-bottom generator probe 5mm x 75mm, recommended for 0.5ml,1.5ml, and 2ml tubes, best used with sample volumes below 0.4ml, compatible with all homogenizer models

Generator probe. VWR saw-tooth generator probe 7mm x 95mm, recommended for 1.5ml, 2ml, 5ml, and 10ml tubes, volume of 0.4ml or above within 1.5ml tube, compatible with all homogenizer models

Generator probe. VWR saw-tooth generator probe 10mm x 115mm, recommended for 10ml, 15ml, and 50ml tubes, compatible with all homogenizer models

Generator probe. VWR saw-tooth generator probe 20mm x 115mm, recommended for 50ml tubes and small beakers, compatible with all homogenizer models

Generator probe. VWR saw-tooth generator probe 20mm x 200mm, recommended for large beakers and containers, compatible with pro250 and all benchtop homogenizer models

Generator probe. VWR openslotted generator probe 37mm x 200mm, recommended for large beakers and containers, compatible with both pro400 benchtop homogenizer models

Generator probe. VWR openslotted generator probe 30mm x 200mm, recommended for large beakers and containers, compatible with pro250 and all benchtop homogenizer models

Generator probe. VWR openslotted generator probe 37mm x 340mm, recommended for large beakers and containers, compatible with both pro400 benchtop homogenizer models

Generator probe. VWR openslotted generator probe 43mm x 200mm, recommended for large beakers and containers, compatible with both pro400 benchtop homogenizer models

Generator probe. VWR openslotted generator probe 43mm x 340mm, recommended for large beakers and containers, compatible with both pro400 benchtop homogenizer models

Generator probe. VWR openslotted generator probe 59mm x 200mm, recommended for large beakers and containers, compatible with both pro400 benchtop homogenizer models

Homogenizing mix. Package contains 50 x 2 ml reinforced Screw cap tubes pre-filled with 2.8 mm high density ceramic beads, certified RNAse/DNAse free. ideal for processing tough tissues such as muscle and skin. 2ml bead kits are compatible with the bead ruptor 24/bead ruptor 12 mill homogenizers.

Homogenizing package. VWR 250 max homogenizing package is perfect for homogenizing in 10ml-50ml tubes and medium-large beakers. most effective for sample volumes of 1.5ml to 2.5l. includes: 120v pro250 homogenizer unit, 10x115mm saw-tooth generator probe, 20x200mm

Homogenizing package. VWR 250 max homogenizing package with stand is perfect for homogenizing in 10ml-50ml tubes and medium-large beakers. most effective for sample volumes of 1.5ml to 2.5l. includes: 120v 250 homogenizer unit, 10x115mm saw-tooth generator probe, 20x 200mm, 250 stand assembly

Omni Tissue Homogenizer B offers variable speeds (5,000 - 30,000 rpm) to homogenize. Disurpt or emulsify samples (.25ml -100ml) in seconds. Uses OMNI TIPS -or- B style probes in 5, 7 or 12mm diameter (sold separately). 115 volts. Includes tool kit, clamp for post mounting & user manual.

Probe stainless steel generator. Flat bottom, 5mm diameter by 75mm length produces fine particle size reduction. Capable of processing sample volumes from .100ml to 10ml. B series design fits OMNI THq and THb homogenizers.

OMNI Tissue Master 125 Economy series homogenizer. Comes complete with a 7mm stainless steel probe. Perfect for light duty use, the TM125 has a 125W motor, variable speed up to 35,000 RPM, and a processing range of 0.25mL to 30mL. Contains everything youmneed to start homogenizing!

OMNI Tissue Master 125 Economy kit offers maximum flexibility. Perfect for light duty use, this kit includes the TM125 homogenizer and 3 stainless steel probes (5, 7 & 10mm diameter). Processing range 0.25mL - 100mL.

Probe. OMNI tip disposable plastic deaggregation homogenizer. 7mm x 110mm flat bottom. 25 per pack. processes samples from .25ml to 30ml. these probes are compatible with thq and thb homogenizers. OMNI tips are disposable, eliminating cross-contamination, but can also be cleaned for re-use.

Probe. OMNI tip disposable plastic deaggregation homogenizer probes. 7mm x 110mm flat bottom. 50 per pack. processes samples from .25ml to 30ml. these probes are compatible with thq and thb homogenizers. OMNI tips are disposable, eliminating cross-contamination, but can also be cleaned

Probe. OMNI tip disposable plastic deaggregation homogenizer probes. 7mm x 110mm flat bottom. 100 per pack. processes samples from .25ml to 30ml. these probes are compatible with thq and thb homogenizers. OMNI tips are disposable, eliminating cross-contamination, but can also be cleaned

Probe. OMNI tip disposable plastic hard tissue homogenizer probes. 7mm x 110mm flat bottom. 50 per pack. processes samples from .25ml to 30ml. these probes are compatible with thq and thb homogenizers. OMNI tips are disposable, eliminating cross-contamination, but can also be cleaned for re-use.

Probe. OMNI tip disposable plastic hard tissue homogenizer probes. 7mm x 110mm flat bottom. 100 per pack. processes samples from .25ml to 30ml. these probes are compatible with thq and thb homogenizers. OMNI tips are disposable, eliminating cross-contamination, but can also be cleaned for re-use.

Blender. The Stomacher 80 microBiomaster laboratory paddle blenders provide small tissue processing solutions for clinical and life science microbiology. Capable of processing samples from 250ul to 80ml, 240V.

Blender. The Stomacher 80 microBiomaster laboratory paddle blenders provide small tissue processing solutions for clinical and life science microbiology. Capable of processing samples from 250ul to 80ml. 110V.

Blade and Half-Moon Impeller BR 10 Cross 50 x 12mm stainless steel AISI 304 length: 400mm Shaft diameter: 8

Micro-organism lysing VK01 - 2mL includes 50 preps of 0.1mm glass beads in 2mL standard tubes. VK01 is designed for micro-organism lysing like gram-, gram+ bacteria, spores and more. Sample size range: from 20mg to 200mg sample or 200UL to 1.6mL culture

Hard tissue homogenizing CK28 - 2mL includes 50 preps of 2.8mm ceramic (zirconium oxide) beads in 2mL standard tubes. CK28 is designed for hard tissue homogenization like ear, lung, heart, spleen, tail, artery, arabidopsis, leaves and more. Sample size range:from 20mg to 200mg tissue or 200-L to 1.6mL culture..

Small Volume Soft Tissue Homogenizing Mix. VWRCeramic Beads with 1.4mm contains 50x 0.5ml screw cap tubes pre-filled with 1.4mm ceramic beads. Certified RNase and DNase free. Recommended for soft tissue samples, biopsies and tissues sections.

Tough Micro-Organism Lysing Mix. VWR Glass Beads with 0.5mm, contains 50x 2ml screw cap tubes pre-filled with 0.5mm glass beads. Certified RNase and DNase free. Recommended for processing cells, bacteria, gram-, gram+ and spores.

Hard Tissue Grinding Mix. VWR Metal Beads with 2.4mm, contains 50x 2ml reinforced screw cap tubes pre-filled with 2.4mm high density metal beads. Certified RNase and DNase free. Recommended for processing hard tissues, dry grinding, skin, muscle, bone, hair, roots and seeds.

Hard Tissue Homogenizing Mix. VWR Ceramic Beads with 2.8mm, contains 50x 1.5ml microtubes pre-filled with 2.8mm ceramic beads. Certified RNase and DNase free. Recommended for processing hard tissues, heart, muscle, skin, tendon, tail and whole organs.

Soft Tissue Homogenizing Mix. VWR Ceramic Beads with 1.4mm, contains 50x 1.5ml microtubes pre-filled with 1.4mm ceramic beads. Certified RNase and DNase free. Recommended for processing soft tissues, brain, liver, kidney and soft plant material.

Hard Tissue Grinding Mix. VWR Metal Bead with 2.4mm, contains 50x 1.5ml microtubes pre-filled with 2.4mm high density metal beads. Certified RNase and DNase free. Recommended for processing hard tissues, dry grinding, skin, muscle, bone, hair, roots and seeds.

Mini bead mill. VWR Homogenizer is specifically designed for grinding, lysing, and homogenization of biological samples. Ideal solution for ex traction of nucleic acids, proteins and small molecules from the toughest samples. Compatible with 0.5ml, 1.5ml microtubes, 2ml and 7mL tubes.

VWR Reinforced 2ml Bead Mill Tubes with Caps, Certified RNase and DNase free.

Ceramic beads. VWR Ceramic Bulk Beads 2.8mm, Certified RNase and DNase free. Recommended for processing soft tissues, brain, liver, kidney and soft plant material.

Ceramic beads. VWR Ceramic Bulk Beads 1.4mm, Certified RNase and DNase free. Recommended for processing soft tissues, brain, liver, kidney and soft plant material.

Bead. VWR Metal Bulk Beads 2.4mm, Certified RNase and DNase free. Recommended for processing hard tissues, dry grinding, skin, muscle, bone, hair, roots and seeds. 500g

VWR Hard Tissue Homogenizing Mix. Hard Tissue Homogenizing Mix, with 2.8 mm Ceramic Beads Package contains 50 X 2 mL reinforced screw cap tubes pre-filled with 2.8 mm ceramic beads. Certified RNase and DNase free.

Soft Tissue Homogenizing Mix. VWR Ceramic Beads with 1.4mm, contains 50x 2.0ml screw cap tubes pre-filled with 1.4mm ceramic beads. Certified RNase and DNase free. Recommended for processing soft tissues, brain, liver, kidney and soft plant material.

Category