Rxreliance

Nebulizer. SeaSpray Nebulizer, 2mL/min uptake for Elan, Optima 3000RL, Plasma Series. The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization efficiency for trace level analyses.

Nebulizer. MicroMist Nebulizer, 0.4mL/min uptake for Elan, Optima 3000RL, Plasma Series. The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes.

Nebulizer. MicroMist Nebulizer, 0.2mL/min uptake for Elan, Optima 3000RL, Plasma Series. The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 - 0.6 mL/min.EzyFit connector with 1.3 mm o.d. X 0.50 mm i.d

ESI Super Rack, 27 position (3x9) (28mm) for auto sampler.

ESI Super Rack, 10 position (2x5) (61mm) (Holds 250mL bottles).

Stopcock 1-Way for use with SC-Autosampler rinse lines.

High Flow Sample Probe, Carbon fiber support, 0.8mm inner diameter (blue marker) for ESI Autosampler.

Sample Rack 45 Position/120 cc (Oils) for ESI autosampler.

Enclosure for SC-14 (without ULPA filter) for Auto sampler ESI.

Enclosure including ULPA filter for SC-8 ESI autosampler.

PC3 DV with PFA-ST Nebulizer ompact Peltier Cooled inlet system which incorporates the ESI cyclonic spray chamber. The peltier within the PC3 can be air or water cooled

Nut. Glass Tube Nut, 25 mm. A variety of hardware fittings are required to connect the glassware to Elemental Analyzer. The nuts, Washers, O-Rings and other fittings listed here are identical to the parts which were shipped with your instrument. Use them as replacement parts to insure p

Wrench for 2400 Combustion Tube, 25 mm.

Quartz Oxygen Pyrolysis Tube.Combustion tubes are composed of pure fused quartz which is 99% Si02. Fused quartz has been chosen because of its very high purity and low thermal expansion rate. Because we care about your safety.

Platinum Gauze Strip.

Replacement Air Filter Element for Filter Assembly.

Graphite/Vespel Ferrule, 2-hole: 1/8inch, 0.8mm holes suitable for installing 2x0.53mm column.

Wall mounting clamps for your Click-on Inline Filters.

Soft Carrying Case.

Soil Vapor Intrusion tube. Conditioned, Stainless Steel, Enhanced recoveries, even of highly contaminated sites, From chloromethane through diesel range hydrocarbons, After the analysis, Tubes are clean and ready for re-sampling reducing costs.

Soil Vapor Intrusion tube. Un-Conditioned, Stainless Steel, Enhanced recoveries, even of highly contaminated sites, From chloromethane through diesel range hydrocarbons, After the analysis, Tubes are clean and ready for re-sampling reducing costs.

GC Start UP Kit 1/8inch Lines Copper Tubing and Fitting for (3) Gases.

UV Windows 1/2Dx1/16T.

Quartz Combustion Boats pk10.

High sensitivity absorption cell 5inch.

Low sensitivity absorption cell 1inch.

Replacement Carbon, 500g.

Sample Substrate Chromosorb, 250mL.

Basic Spares Kit for SMS 100 with no Catalyst Tubes.

Ball Joint Cassette Torch Injector Support Adapter, For ELAN DRC II.

Injector Adapter. Cassette Torch, For use with the Corrosian-Resistant Torch and the Ryton Scott Spray Chamber. For cassette torch mounts.

Spray Chamber Adapter.

NexION Instrument Filter, Replacement instrument filter for left side of system.

NexION Instrument Filter, Replacement instrument filter for back side of system.

Adjustable Torch Mount Assembly for NexION.

Nafion Drying Tube.

Amalgamator Tube for SMS 100.

Sample Gas Transfer Tubing Assembly.

Vapor Trap Kit with Carbon Material Hg.

Injector Fork Kit.

CVAAS Tubing Kit.

Nickel Boats pk42.

MPP Santoprene Tubing, 0.38mm, Orange green, Pk12.

MPP Santoprene Tubing, 0.38mm, Orange green, Pk12.

MPP PVC Tubing. Flared, 0.64mm, Orange white, 12/pk. Flared tubing is easier to change and more reliably connected than non-flared small-bore tubing.

MPP Solvent Tubing. Flared, 0.57mm, White yellow, 12/pk. Resistant to kerosene. Flared tubing is easier to change and more reliably connected than non-flared small-bore tubing.

High Purity PFA Tubing (5 m coil) (1/16in OD) (blue marker) 0.8mm ID.

CTFE High-flow 8 port valve for SC-FAST (0.8mm).

Brass Nut, Size: 1/4in, Pk5.

Stainless Steel Nut, Size: 1/8in, Pk5.

Tubing. Stainless Steel, 125cm, Outer Diameter: 1/16in, Inner Diameter: 0.02in.use: Sample Input/Output, Pk2.

NaCl Windowundrilled.

Stainless Steel Bulkhead Adapter, Size: 1/4inch to 1/4inch Tube.

Replacement Elementused for Air Dryer Filter for Pre-Filter.

Disk. Barium Fluoride for Microscope, Diameter: 13mm, Length: 1mm, Infrared windows allow you to support microsamples for infrared analysis with the microscope.

Disk. Barium Fluoride for Microscope, Diameter: 13mm, Length: 2mm, Infrared windows allow you to support microsamples for infrared analysis with the microscope.

Disk. Zinc Selenide for Microscope, Diameter: 13mm, Length: 1mm, Infrared windows allow you to support microsamples for infrared analysis with the microscope.

Cylindrical Cell Holder, 50mm.

Window KBr 25mm.

Cylindrical Cell Holder.

GSV Fitting, Reducingunion, 1/8inch to 1/16inch.

Injector Septa. BTO(Bleed Temperature Optimized), 11mm diameter, For GC/MS applications, T is the finest GC septum we have tested. Formulated to extend low-bleed and outstanding mechanical properties of premium GC septa to the highest-temperature applications.

Sample loop 3.5mL 125 seconds.

Sample loop 4.0mL 145 seconds.

Sample loop 4.5mL 165 seconds.

Sample loop 5.0mL 185 seconds.

Sample loop 5.25 mL.

Tubing. Capillary Tubing 18inch 0.043 x 0.017 for Mira Mist. 0.5 meters of.044inch OD X.018inch ID. Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.

Tubing. Capillary Tubing 18inch 0.043 x 0.017-10 pack for Mira Mist Nebulizer. 0.5 meters of .044inch OD X .018inch ID Clear with attached BRC 3 fitting for sample lines. (10-pack)

Gas line 2 mm gas line with UpChurch fittings for Mira Mist Nebulizer. 2 mm gas line with UpChurch fingertight fittings for Mira Mist and Ari Mist nebulizers.

Quick Release for PE Optima 2000, 4000, 5000 series.

Adapter 1/4inch for 3000 & ICP-MS f/Mira Mist. 1/4inch Swagelok for PE Optima 3000 series, PE Sciex ICP/MS

Tubing .043inch ODx.018inch ID polyethylene 10ft for Mira Mist Nebulizer. 3 meters of.043inch OD X.018inch ID Clear Polyethylene for sample lines.

Tubing .043inchODx.018inch ID polyethylene 100ft for Mira Mist Nebulizer. 30 meters of.043inch OD X.018inch ID Clear Polyethylene for sample lines.

Stirrer-6.5 inches long.

Vial, 20mL Polypropylene 21.5mm x 100mm, 500 per kit.

Rack 40 position 20ml vials.

Kit-Rinse/Drain CONN 72 IN 3/16IN.

Drain Pump Tubing and Connector Kit Tygon.

Bottle, Polypropylene Bottle 1 Rinse Containers, 1 Liter.

ST Nebulizer line, Connects to port number 3 0.15 .i.d. red marker.

ST Nebulizer line, Connects to port number 3 0.2 .i.d. Purple marker.

ST Nebulizer line, Connects to port number 3 0.3 .i.d. Yellow marker.

ST Nebulizer line, Connects to port number 3 0.5 .i.d. Orange marker.

Sample Loop, Connects to ports number 1 and 4 1000 uL.

Sample Loop, Connects to ports number 1 and 4 2000 uL.

Internal Standard addition tee, Used with ST nebulizer 0.15.

Internal Standard addition tee, Used with ST nebulizer 0.2.

Internal Standard addition tee, Used with ST nebulizer 0.25.

Internal Standard addition tee, Used with ST nebulizer 0.3.

Internal Standard addition tee, Used with ST nebulizer 0.5.

Ferrule nut fittings set, M5, Quantity 10.

High Flow ST nebulizer line, Connects to port number 3 0.25 i.d. Green marker.

Sample Loop, 0.5mL connect to ports number 1 and 4.

Sample Loop, 1mL, Connect to ports number 1 and 4.

Sample Loop, 2mL, Connect to ports number 1 and 4.

Sample Loop, 3mL connect to ports number 1 and 4.

Sample Loop, 4mL connect to ports number 1 and 4.

Internal Standard addition tee, Used with ST nebulizer 0.25.

Internal Standard addition tee, Used with ST nebulizer 0.5.