Rxreliance

Stand, 1 monitor free stand l sit/stand, free standing sit/stand workstation converts any existing fixed height desk to a height adjustable workstation and will allow for easy vertical height adjustment for monitors weighing 5 to 16 lbs.; Silver; Black Work Surface

Shelving, 2-Tier for 6, 9, and 12 Drum Locker, Two-tier of movable shelves, including mounting brackets. 16-in wide with 2-in lip. For use with 6, 9, and 12-drum lockers

Panel. Glacier white powder-coated steel panel hides hood's interior components on the rear to provide finished appearance, Rear finish, 8inch, XL, Floormat, Recommended when hood is mounted on a casework island with back exposed. Adds 1.5inch to overall depth of Floor-Mount hoods.

Keyboard Tray arm. Articulating arm suspends keyboard, one finger movement. Large keyboard tray accommodates keyboard and mouse. Arm extends up to 24 inch, collapses to 3inch when not in use. Mount Included, 7019-500HY-NM, 8111SPEC HDWR.

Dual Monitor Arm, 7500-Wing, easily adjustable monitor height and position. Monitors can be positioned either side-by-side or one above the other. Hold 3.5-13.5 lbs per monitor, 8111.

Drawer unit, 1 lock 11. 81inx17. 20inx5. 91in load capacity 22 lbs.

Blower. Intelli-Sense Multi-Speed Coated Steel Blower, 115v, Motor Type: Energy Efficient Direct Drive ECM MotorCFM: Between 1000 and 2000, Less than 1000, Hood Application: Low to moderately corrosive, HP: 1, 12.25inchinner diameter Inlet, 7.0 inch x 13.50 inch Outlet.

Blower. Intelli-Sense Multi-Speed Fiberglass Blower, 230v, Motor Type: Energy Efficient Direct Drive ECM MotorCFM: Between 1000 and 2000, Less than 1000, Hood Application: Low to moderately corrosive, HP: 1, 10.38inchinner diameter, 10.75 inch outer diameter.

Sash-glider kit, weight: 5. 0 lbs, weight metric: 2. 0 kg.

Utility and File Cabinet, with 2 shelves, double door, 36inchhigh x 13inch deep, M30 width.

Work Surface. SpillStopper Work Surface, Molded of corrosion-resistant epoxy resins, dished and contoured to conform to interior of Protector Hoods. Pre-drilled 1.5in diameter holes for venting and 2.5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional, Cupsink separate

Work Surface. SpillStopper Work Surface, 5 ft w x 36. 0in d, No cupsink cutout, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate, interior of Protector Hood

Work Surface. SpillStopper Work Surface, 36. 0in deep, 5 ft, Right rear cupsink cutout, Dimensions: 60. 0in w x 36. 0in d x 1. 25in h, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood

Work Surface. SpillStopper Work Surface, 6 ft w x 36in d, no cutouts, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Shelf for 30 Gallon, 30 and 90 Minute EN Safety Cabinets, Material: Powder coated steel, Dimensions: 29.21in W x 1.18in H x 17.3in D, hold up to 165-lbs (75-kgs) and adjust on 1-1/4-inch (32-mm) increments for versatile storage. 1-inch (30-mm) high ledge help prevent sliding off.

Shelf for 45 Gallon, 30 and 90 Minute EN Safety Cabinets, Material: Powder coated steel, Dimensions: 41.02in W x 1.18in H x 17.3in D, hold up to 165-lbs (75-kgs) and adjust on 1-1/4-inch (32-mm) increments for versatile storage. 1-inch (30-mm) high ledge help prevent sliding off.

Tray for 30 Gallon, 30 and 90 Minute EN Safety Cabinets with a 3-1/2-inch (89-mm) curved edge provide additional protection against leaks and spills, Color: Light Grey, Material: Polypropylene, Dimensions: 29.13in W x 3.47in H x 17.09in D

Tray for 45 Gallon, 30 and 90 Minute EN Safety Cabinets with a 2-inch (51-mm) curved edge provide additional protection against leaks and spills. Color: Black, Material: Polyethylene, Dimensions: 40.95in W x 1.97in H x 16.93in D

Base Cover for 30 Gallon, 30 Minute EN Safety Cabinet, Material: Melamine resin laminated chipboard, Color: Yellow, Dimensions: 30.95in W x 3.43in H x 1.5in D, It serves to conceal the integrated transport base, Prevent dust and debris from collecting underneath the cabinet

Base Cover for 45 Gallon, 30 Minute EN Safety Cabinet, Material: Melamine resin laminated chipboard, Color: Yellow, Dimensions: 42.76in W x 3.35in H x 1.5in D, It serves to conceal the integrated transport base, Prevent dust and debris from collecting underneath the cabinet

Base Cover for 30 Gallon, 90 Minute EN Safety Cabinet, Material: Powder-coated sheet steel, Color: yellow, Dimensions: 32.21in W x 3.35in H x 0.59in D,It serves to conceal the integrated transport base, Prevent dust and debris from collecting underneath the cabinet

Base Cover for 45 Gallon, 90 Minute EN Safety Cabinet, Material: Powder-coated sheet steel, Color: yellow, Dimensions: 44.02in W x 3.35in H x 0.59in D, It serves to conceal the integrated transport base, Prevent dust and debris from collecting underneath the cabinet

Cabinet Mover for relocating EN Safety Cabinets, Fits 30- and 45-Gallon Models, Material: Steel, Dimensions: 5.51in W x 3.54in H x 23.62in D, Color: Black, To move a heavy EN cabinet - maneuver through doorways and tight spaces where pallet jacks are not practical

Wall Hanger Assembly/Kit, For 20 gallon safety, and 12/17 gallon Piggyback cabinet.

Lable pack for hazardous cabinet, Contains: Acid, Base, Corrosive, Flammable Solid, Organic Peroxide, Pyrophoric, Toxic, Oxidizer, Water-Reactive, and Self-Reactive, compliant with NFPA 1, NFPA 400, and IFC code for storage of hazardous material

ChemCor SpillSlope Shelf 24in. ChemCor SpillSlope Shelf, Material: Galvanized Steel, for 15 gal Under Fume Hood Safety Cabinet, Size: 24in, adjust on 3in (76-mm) increments for versatile storage. Meets ANSI MH28.1

ChemCor SpillSlope Shelf 36in. ChemCor SpillSlope Shelf, Material: Galvanized Steel, for 23 gal Under Fume Hood Safety Cabinet, Size: 36in, adjust on 3in (76-mm) increments for versatile storage. Meets ANSI MH28.1

ChemCor SpillSlope Shelf 48in. ChemCor SpillSlope Shelf, Material: Galvanized Steel, for 31 gal Under Fume Hood Safety Cabinet, Size: 48in, adjust on 3in (76-mm) increments for versatile storage. Meets ANSI MH28.1

Overhead Arms, Production Basics - 8538

Tube Footrest for RTW Bench, Production Basics - 8655

Tube Footrest for RTW Bench, Production Basics - 8656

Adjustable Tube Footrest for C-Leg Bench, Production Basics - 8664, Adjustable Footrest

Adjustable Tube Footrest for C-Leg Bench, Production Basics - 8665, Adjustable Footrest

Footrest. For use with modular workstations (11005-006, -010, -030, -034). Adjustable-height tubular support that attaches to back frame. Features a black wrinkle epoxy powder-coated finish. Height: 152.4cm. Shipping weight: 14.1kg.

Footrest Plate, Production Basics - 8668

Bottle Holder. Single. Designed to hold 500mL squeeze bottle. Made from chemically-resistant plastic. Keeps top-heavy bottles from tipping over, offering protection from messy and costly spills. With double-sided tape. Can also be screw-mounted. Hole diameter: 8.1cm. Dimensions: 10.2Lx8.4Hx10.2Dcm.

Protector Acid Storage Cabinet Vent Kit. For venting cabinet through work surface and into a fume hood.

BASE STAND FULL SIZE CABINET. The Base Stand is used to raise the bottom cabinet of a stack from the floor. Fits all standard cabinets. Only available in Black. Dimensions 480 x 480 x 200mm.

Super Erecta Wire Shelving. Adjustable stainless steel shelving for corrosive environments. Meets MIL-S-40144E specifications. Adjustable leveling bolts compensate for uneven surfaces. 61Wx121.9Lcm. 7.3kg.

Weather cap zero pressure 10 inch diameter. PVC. Zero pressure weathercap, 10 diameter. Ducting parts.

PVC Duct. For use with Protector VS Ventilation Stations. Nominal 15.2cm diameter round by 3m long.

PVC Elbow. For use with Protector VS Ventilation Stations. 90[degree], for 15.2cm diameter round duct.

Flexible Duct Connection. For use with Protector VS Ventilation Stations. For 15.2cm diameter round duct. Comes with two clamps.

Blower Transition Adapter. For use with Protector VS Ventilation Stations. 10.79x19.68cm rectangle to 15.2cm diameter round.

Zero-Pressure Weathercap. PVC. For use with Protector VS Ventilation Stations. For use with 15.2cm diameter round duct.

Elbow 90 12 diameter. PVC. 90-degree elbow coupling, 12 diameter. Ducting parts.

Duct, plastic, 10 inchx10 feet. PVC. 10 diameter, 10' length duct. Ducting parts.

Coupling elbow 90 degree 10 inch. PVC. 90 degree elbow coupling, 10 diameter. Ducting parts.

Coupling straight 10 inch. PVC. Female duct coupling, 10 diameter. Ducting parts.

Spiral Tube for Labconco Fume Hoods. For temporary installations. Neoprene-impregnated fiberglass reinforced with steel wire. Includes rigid duct connector and two clamps. 3.05m tube length. 27.94cm diameter.

Duct connection, flexible for 12duct. Flexible duct connection for 12 diameter duct. Ducting parts.

Thermoplastic duct 12diameter. PVC. 12 diameter, 10' length duct. Ducting parts.

Weather cap, zero pressure. PVC. Zero pressure weathercap, 12 diameter. Ducting parts.

SELF-CLOSING DOOR KIT R-HINGE - 9914701P

Accessories for Drum Storage Cabinets, Eagle Mfg - 1954, Drum Lifter

Drawer Units, Production Basics - PB-8605, C-Leg and Easy-Lift Series Drawer, 6 IN.

Drawer Units, Production Basics - PB-8610, C-Leg and Easy-Lift Series Drawer, 12 IN.

Parts Bin Panel, Production Basics - PB-8627

Drawer with Mounting Kit, Production Basics - PB-8601

Drawer Units, Production Basics - PB-8607, C-Leg and Easy-Lift Series Drawer, 3 IN.

Drawer Units, Production Basics - PB-8570, Pedestal Drawer Unit, with 2 - 6 IN. and 12 IN. Drawers and Leveling Feet

Drawer with Mounting Kit, Production Basics - PB-8606

Suspended Drawer Unit with Mounting Kit, Production Basics - PB-8849

COVER WORKSTATION ESD TAG BLUE 48X48IN - FHSB4848

PANEL TRESTON BACK M36 X 25.19IN - E802913-49

Lista Aluminum Drawer Divider, Arlink - D150-09S, Lista Aluminium Drawer Divider

Lista Aluminum Drawer Divider, Arlink - D100-08S, Lista Steel Divider Drawer

VWR Front Panel for horizontal channel, 4 Cutouts for Decora Duplex, M1800.

VWR Service Panel (1 pc), in upright, Three 1IN holes.

VWR Service Panel (1 pc), in upright, Cutout for one decora duplex.

Replacement Shelf and Polyethylene Trays/Sumps for Justrite Safety Cabinets, Justrite - 29050

Replacement Shelf and Polyethylene Trays/Sumps for Justrite Safety Cabinets, Justrite - 29051

Replacement Shelf and Polyethylene Trays/Sumps for Justrite Safety Cabinets, Justrite - 29052

Replacement Shelf and Polyethylene Trays/Sumps for Justrite Safety Cabinets, Justrite - 29054

Replacement Shelf and Polyethylene Trays/Sumps for Justrite Safety Cabinets, Justrite - 29055

Replacement Shelf and Polyethylene Trays/Sumps for Justrite Safety Cabinets, Justrite - 29058

OXYGEN MONITOR ATMOSENSE 230V - 5255590

STAND HYDRAULIC 3FT SOLO LOGIC 115V - 5185300

STAND HYDRAULIC 4FT SOLO LOGIC 115V - 5185400

STAND HYDRAULIC 5FT SOLO LOGIC 115V - 5185500

STAND HYDRAULIC 6FT SOLO LOGIC 115V - 5185600

STAND HYDRAULIC 3FT SOLO LOGIC 230V - 5185310

STAND HYDRAULIC 4FT SOLO LOGIC 230V - 5185410

STAND HYDRAULIC 5FT SOLO LOGIC 230V - 5185510

STAND HYDRAULIC 6FT SOLO LOGIC 230V - 5185610

UV LAMP KIT LOGIC BIOSAFETY CABINET - 3289100

BASE STAND NON-WELDED 3FT LOGIC - 5171300

STAND TELESCOPING 3FT LOGIC FIXED FEET - 5173300

STAND TELESCOPING 3FT LOGIC CASTERS - 5173310

VENTUS II CANOPY 3FT LOGIC CLASS II A2 - 3889210

PREFILTER KIT 3FT WASHABLE LOGIC - 3288600

BASE STAND NON-WELDED 4FT LOGIC - 5171400

STAND TELESCOPING 4FT LOGIC FIXED FEET - 5173400

STAND TELESCOPING 4FT LOGIC CASTERS - 5173410

VENTUS II CANOPY 4FT LOGIC CLASS II A2 - 3889211

PREFILTER KIT 4FT WASHABLE LOGIC - 3288601

BASE STAND NON-WELDED 5FT LOGIC - 5171500

STAND TELESCOPING 5FT LOGIC FIXED FEET - 5173500

STAND TELESCOPING 5FT LOGIC CASTERS - 5173510

VENTUS II CANOPY 5FT LOGIC CLASS II A2 - 3889212