• 0
Shop Products $

Pump marprene tubing, For Use With AKTA start.

UV module, AKTA start is equipped with a UV monitor to continuously measure the absorbance of the liquid in the UV flow cell at a fixed wavelength (280 nm), Incorporates durable and reliable LED technology that is ready-to-use without any warm-up time.

Conductivity cell, monitor continuously reads the conductivity of the liquid in the conductivity flow cell, For Use With AKTA start

Tubing cutter.

Stop plug 5/16 pk5, Connector 5/16IN male, Polyetheretherketone.

Stop Plug 1/16inch Male, Polyetheretherketone, Fingertight.

Peristaltic pump[110.5Z20.P47], single-channel, consists of a four-roller pump head that delivers low pulsation, accurate flow rates enable reproducible isocratic or gradient elution, provides flow rates up to 5 ml/min

Inlet tubing kit, Contains the inlet tubing for AKTA start, for two inlets.

Complete tubing kit, Contains the complete AKTA start tubing connections.

USB cable used on AKTA start.

Accessory box for AKTA start.

UV flow cell. Replacement UV flow cell (2mm path length) for AKTA start, 2 mm flow cell for UV-LED monitor U9-L. Included with AKTA pure equipped with U9-L. Can be used as second UV monito

Buffer Valve. Buffer valve is used as a switching valve for gradient formation. It enables the use of two buffers, A and B, which are required for forming gradient during runs, For Use With AKTA start

Sample valve allows either the buffer or the sample to enter the flow path. The sample valve enables the direct application of the sample onto the column using the pump.

Outlet valve[CTV-31-32U-1], used to direct the flow to the fraction collector or to the waste, For Use With AKTA start

Manual Injection Valve Kit, contains the stator and rotor of the valve, For Use With AKTA start.

Injection valve. Manual injection valve, 6-port rotary valve that is manually operated to transfer the preloaded sample onto the column. The sample loop (for the injection of small sample volumes [25 ul to 5 ml], or a Superloop injection loop for larger sample volumes [10 to 150 ml])

Cable assembly for Frac30 fraction collector.

Bowl assembly of Frac30 fraction collector.

Buffer bottle tray for AKTA start.

T-slot holders, Column holding slots used in AKTA start.

Mains cable 220 V, Replacement power cable for AKTA start (220V) - EU use.

Drive sleeve. Replacement drive sleeve for Frac30 fraction collector used with AKTA start. Used on the drive bushing to prevent bowl slippage

Column clamp for use with AKTA systems, such as AKTA pure, AKTA avant and AKTA start. Fits columns with OD between 10 and 21 mm

Mixer. AKTA start mixer is a 0.4 ml static mixer, used for blending buffers during gradient runs, ensuring reproducibilty across purification runs.

Screw lid kit, Bottle top for buffer bottles used with AKTA systems. Lid is polypropylene sized for GL45 glass bottles with membrane (Ethylenepropylenediene ) that allows tubing to be passed through.

Tubing holder, holds tubing in place in frac arm.

Union (titanium), for use with AKTA systems, Connects 1/16 in female to 1/16 in female fittings.

Connector. Fingertight Connector 1/16inch Male, Fingertight fittings (black) for use with AKTA systems, Polyetheretherketone

Superloop, 1/16inch fittings, 10 ml, can be used in conjunction with 7-port valves, Flexible: inject large or small sample volumes, High reproducibility and recovery, 130 x 30 mm

Superloop, 1/16inch fittings, 50 ml, can be used in conjunction with 7-port valves, Flexible: inject large or small sample volumes, High reproducibility and recovery, 130 x 30 mm

Fill port. Injection Fill port, INV-907, for small samples, A range of manual and automated valves to meet a variety of performance requirements.

Superloop, For sample loading (from 1ml to 150ml) onto AKTA systems. Max pressure 14 psi (0.1 MPa). M6 connectors are attached, For use with aqueous solutions and alcohols only.

Fingertight Connector 1/16inch Male for Tubing.

Inlet Filter Assembly kit. Inlet Filter Assembly Kit, Contents: 1x Support net, 1x Filter (mounted on a fliterholder), 1x Screw lid and cap membrane, For Use With classic AKTA, Polypropylene (PP), Titanium Alloy (Ti alloy)

Union (black PEE) for connecting fittings used with AKTA systems. This union connects 1/16 in female to 1/16 in female fittings.

Ferrule (Ethylenetetra fluorethylene) for use with OD 1/8 inch tubing on AKTA systems.

Tubing connector 1/8inch, polyetheretherketone, Connection: 5/16inch maleFor 1/8inch outer diameter, black, for use with tubing used on AKTA systems

Inlet filter set, 10 filters/nets, 25 mm, Polypropylene, Includes: 10xNet ring, 10xsupport screen.

Sample loop for use with AKTA systems. Wetted materials are Polyetheretherketone. Tubing Inner diameter 0.75 mm, Outer diameter 1/16IN fitted with fingertight connectors 1/16IN, 2ml INV-907

Sample loop for use with AKTA systems. Wetted materials are Polyetheretherketone. Tubing Inner diameter 0.75 mm, Outer diameter 1/16IN fitted with fingertight connectors 1/16IN, 1ml INV-907

Short Column Holder, for columns 26 mm inner diameter, For Use With classic AKTA.

Tricorn storage/shipping device.

Empty Glass Columns, C Series, Cytiva - 19-5103-01, C 16/70

Empty Glass Columns, C Series, Cytiva - 19-5003-01, C 10/40

Empty Glass Columns, C Series, Cytiva - 19-5001-01, C 10/10

Accessories for HiScale Columns, Cytiva - 28-9666-49, Column Tube, 16×200 mm

Spare 8 position cell changer, 10mm pathlength.

Xenon lamp for libra.

KIT TRICORN 5 FILTER - 29053586, Tricorn™ 5 filter kit, 7 µm porosity

KIT TRICORN 10 FILTER - 29053612, Tricorn™ 10 filter kit, 7 µm porosity

EXTENDED WARRANTY VWR 16 SAMPLE P.S.

EXTENDED WARRANTY VWR 96 SAMPLE P.S.

illustraâ„¢ TempliPhiâ„¢ Sequence Resolver Kits, Cytiva - 28-9035-29, illustraâ„¢ TempliPhiâ„¢ Sequence Resolver Kit

HITRAP_HIPREP 1_16 CONNEC AKTA.

HiScreen IMAC FF is a ready-to-use 4.7 ml Column. Designed for process development and prepacked with the well-known affinity medium, IMAC Sepharose Fast Flow. The medium is charged with the metal ion of choice and used in affinity separations (Immobilized Metal Affinity Chromatography).

HiScreen Ni FF is a ready-to-use 4.7 ml Column. Designed for process development and prepacked with the well-known affinity medium, Ni Sepharose 6 Fast Flow. The medium is precharged with Ni ions and used in affinity separations, such as purification of histidine-tagged proteins.

Tubing Fittings and Unions for HiTrap Columns, Cytiva. Tubing Fittings and Unions for HiTrap Columns, GE Healthcare - 18-4284-01, Filter tool, 60 MM

Category