• 0
Shop Products $

Capillary Installation Gauge. for Varian, for use with 1/16 inch ferrules

EP Scientific Low-Carbon Total Organic Carbon Vials, Tubes and Bottles, Thermo Scientific - SCT-18100/TOC, 17 ml (0.58 oz.), Culture Tubes, Flat Bottom, with Closure 18 x 100, Certified <20ppb TOC

CAPILLARY SFC BOOSTERPUMP OUT - G4301-60056

CAPILLARYDAMPER 2SS06MM ID - G4280-81301

CAPILLARYDAMPER 1SS06MM ID - G4280-81300

PM KIT FOR 1220 LC WITH MANUAL - G4280-68750

PM KIT 1120 COMPACT LCMANUAL INJECTOR - G4280-68710

LC PUMP CONNECTING TUBEPTFE - G4280-67304

TUBINGPTFE16CM WITH FITTINGS3MM OD - G4280-60034

PEEK CAPILLARY 25UM X 10CM - G4240-87310

FUSED SILICA/PEEK CAPILLARY 50UM 50CM - G4240-87304

FUSED SILICA/PEEK CAP 75UM100CM - G4240-87303

FUSED SILICA/PEEK CAP 100UM100CM - G4240-87302

FUSED SILICA/PEEK CAPILLARY 25UM105CM - G4240-87301

FUSED SILICA/PEEK CAPILLARY 15UM 90CM - G4240-87300

SST MODIFIED DETECTOR LINE - G3440-60600

TUBE 1/16 INCH 0038INCH X 975 MM - G3440-60336

INERT SST 0031IN ID 1000MM PPIP CARRIER - G3440-60310

SST 0031INID 1000MM PPIP CARRIER LINE - G3440-60300

INERT TUBE 1/16 INCH 0038 INCH X 975MM - G3440-60236

UM+ TUBE 1/16 IN 0020 IN X 1000MM CPM - G3440-60234

INERT TUBE 1/16 INCH 0031 INCH X 1000MM - G3440-60035

INERT TUBE 1/16 INCH 0010 INCH X 1000MM - G3440-60033

NI TUBE 1/16IN X 0031IN ID 1000MM LONG - G3440-20037

TUBE 1/16 INCH 0031 INCH X 1000MM - G3440-20035

TUBE 1/16 INCH 0010 INCH X 1000MM - G3440-20033

PVA CE CAPILLARY 100UM 60CM UNIVERSAL - G160U-61419

PVA CE CAP FOR HSDC 75UM 56CM EFF1 - G1600-68319

PVA CE CAP FOR MS 75UM 125CM TOT1 - G1600-67319

CE-MS CAPILLARY L/125CM 50UM 2/PK - G1600-67311

CE STANDARD CAPILLARY 75UM 104CM 2/PK - G1600-64311

CE EXT LIGHT PATH CAP 50UM 104CM 2/PK - G1600-64232

CE STANDARD CAPILLARY 50UM 104CM 2/PK - G1600-64211

CE STANDARD CAPILLARY 75UM 245CM 2/PK - G1600-63311

CE STANDARD CAPILLARY 100UM 72CM 2/PK - G1600-62411

SST CAPILLARY 280X017MM 1/16IN FITTING - G1375-87400

FUSED SILICA/PEEK CAPILLARY 75UM 65CM - G1375-87327

WASTE TUBE FEP 16MM OD 08MMID - G1375-87326

FUSED SILICA/PEEK CAPILLARY 25UM 55CM - G1375-87323

FUSED SILICA/PEEK CAPILLARY 25U 35CM - G1375-87322

FUSED SILICA/PEEK CAPILLARY 25U 22CM - G1375-87321

CAPILLARY FS/PK 005 X 700 - G1375-87319

SEAT CAPILLARY 75UM 150MM - G1375-87316

OQ/PV CAPILLARY FOR U-LC SYSTEM - G1375-87314

FUSED SILICA/PEEK CAPILLARY 50UM 70CM - G1375-87313

FUSED SILICA/PEEK CAPILLARY 50U 55CM - G1375-87310

FUSED SILICA/PEEK CAPILLARY 50UM 28CM - G1375-87309

FUSED SILICA/PEEK CAPILLARY 75UM 40CM - G1375-87308

FUSED SILICA/PEEK CAPILLARY 100UM 22CM - G1375-87305

FS/PEEK CAPILLARY 100UM 1115MM - G1375-87303

FUSED SILICA/PEEK CAPILLARY 50UM 20CM - G1375-87302

FUSED SILICA/PEEK CAPILLARY 50UM 22CM - G1375-87301

SEAT CAPILLARY 50UM 150MM - G1375-87300

FUSED SILICA/PEEK CAPILLARY 100UM 50CM - G1364-87306

FUSED SILICAPEEK CAPILLARY 50UM 50CM - G1364-87305

FUSED SILICA/PEEK CAPILLARY 25UM 50CM - G1364-87304

SST CAPILLARY 06X270 2 1/16IN MALE - G1361-67501

SST CAPILLARY 06X170 2X1/16IN MALE - G1361-67500

SS CAPILLARY 06X367 MM 1/16IN MALE - G1361-67306

SS CAPILLARY 06X40 MM 1/16IN MALE - G1361-67305

SS CAPILLARY 06X111 MM 1/16IN MALE - G1361-67304

HEAT EXCHANGER 1290 SERIES LONG UP - G1316-80012

HEAT EXCHANGER/COOLER 15UL - G1316-80004

FUSED SILICA/PEEK CAPILLARY 100UM 12CM - G1315-87338

FUSED SILICA/PEEK CAPILLARY 100UM 30CM - G1315-87333

FUSED SILICA/PEEK CAPILLARY 50UM 12CM - G1315-87328

FUSED SILICA/PEEK CAPILLARY 50UM 40CM - G1315-87323

FUSED SILICA/PEEK CAPILLARY 25UM 60CM - G1315-87318

SST CONNECTING CAPILLARY FOR SST PREP - G1315-87305

CP-WAX 51 FOR AMINES 25MX 025MM X 02UM - CP7405

PORABOND U 25M X 032MM X 7UM ON 5 INCH - CP7381I5

CARBOBOND 25M X 053MM X 10UM - CP7374

CARBOBOND 50M X 053MM X 5UM - CP7372

PORABOND Q 50M X 053MM X 10UM - CP7355

PORABOND Q 25M X 053MM WITH 2PT - CP7354PT

PORABOND Q 10M X 053MM WITH 2PT - CP7353PT

PORABOND Q 10M X 053MM X 10UM ON 5 INCH - CP7353I5

PORABOND Q 25M X 032MM WITH 2PT - CP7351PT

PORABOND Q 25M X 032MM X 5UM - CP7351

PORABOND Q 10M X 032MM X 5UM - CP7350

PORABOND Q 25M X 025MM WITH 2PT - CP7348PT

PORABOND Q 25M X 025MM X 3UM - CP7348

CP-SIL 5 CB UM 50M X 053MM X 10UM - CP7140

CP-SIL 5 CB UM 25M X 053MM X 050UM - CP7135

PORAPLOT Q ULTIMETAL 25M X 053MM X 20UM - CP6954

CP-MOLSIEVE 5A UM 25M X 053MM X 50UM - CP6938

CP-SIL 8 CB UM 50M X 053MM X 50UM - CP6681

CP-SIL 5 CB UM 25M X 053MM X 50UM - CP6670

CP-SIL 5 CB UM 10M X 053MM X 50UM - CP6666

ULTIMETAL PLUS TUBING 50M X 053MM ID - CP6581

ULTIMETAL PLUS TUBING 50M X 032MM ID - CP6580

ULTIMETAL PLUS GUARD COLUMN 10M X 053MM - CP6578

ULTIMETAL PLUS GUARD COLUMN 5M X 053MM - CP6577

ULTIMETAL PLUS GUARD COLUMN 2M X 053MM - CP6576

UM PLUS TRANSFER LINE 2M X 075MMID - CP6573

UM PLUS TRANSFER LINE 2M X 025MMID - CP6571

UM TUBING METHYL DEACTIVATED 2M X 053MM - CP6530

CP-SIL 88 50M X 025MM X 020UM - CP6173

VF-200MS 20M X 015MM X 060UM - CP5892

VF-200MS 20M X 015MM X 015UM - CP5891

VF-17MS 20M X 015MM X 015UM - CP5884

FLX SS CPILRY 018X250MM ULTIM3000SD TMO - 8002-0826

FLX SS CPILRY 018X350MM ULTIM3000SD TMO - 8002-0825

FLX SS CPILRY 018X450MM ULTIM3000SD TMO - 8002-0824

FLEX SS CPILRY 018X550MM ULTIM3000 TMO - 8002-0823

FLX SS CPILRY 013X450MM ULTIM3000RS TMO - 8002-0822

FLX SS CPILRY 013X350MM ULTIM3000RS TMO - 8002-0821

FLX SS CPILRY 013X250MM ULTIM3000RS TMO - 8002-0820

FLX SS CPILRY 013X550MM ULTIM3000RS TMO - 8002-0818

PEEK TUB 16X025 SPD20A/AV/M20A 1PK SHM - 8001-0824

FEP TUBE 3X15MM LC2010/SIL20A/C 1PK SHM - 8001-0823

SS CPILRY 16MMODX03MMID X2M L 1PK SHM - 8001-0822

SS CPILRY 16X08MM X2M LC-20AP 1PK SHM - 8001-0821

CONNECTION CAPILLARY 400MM 017MM ID - 79826-87608

CAP CONN 5 - 79826-87605

CAP CONN 1 - 79826-87601

TUBES VERSAPLATE-PSA 100MG 96/PK - 7552101C

TUBES VERSAPLATE-PPL 100MG 96/PK - 7551901C

TUBES VERSAPLATE-C18 OH 100MG 96/PK - 7551601C

TUBES VERSAPLATE-CERTIFY100MG 96/PK - 7550901C

TUBES VERSAPLATE-C18HF 100MG 96/PK - 7550201C

TUBES VERSAPLATE-C18 100MG 96/PK - 7550101C

TUBES VERSAPLATE-PLEXA PAX 30 MG 96/PK - 5982-0602

CAPILLARY ST 017X1200 NX/NX - 5500-1462

CAPILLARY ST 06X900 - 5500-1456

CAPILLARY ST 05X500 LONG SOCKET - 5500-1451

CAPILLARY ST 094X60 SI - 5500-1447

CAPILLARY ST 094X1450 NX/NX - 5500-1445

CAPILLARY ST 094X1150 SX - 5500-1444

CAPILLARY ST 06X1450 NX/NX - 5500-1442

CAPILLARY ST 06X1150 SX - 5500-1441

CAPILLARY ST 012X2000 SX/U6 - 5500-1434

CAPILLARY ST 012X350 SX U6 - 5500-1433

CAPILLARY ST 012X300 NX/NX - 5500-1432

CAPILLARY ST 1X1900 SX/SI - 5500-1415

CAPILLARY ST 012X1200 SX/SX - 5500-1398

CAPILLARY ST FLOW CELL 80-200ML/MIN - 5500-1345

CAPILLARY ST FLOW CELL 40-80ML/MIN - 5500-1344

CAPILLARY ST FLOW CELL 15-40ML/MIN - 5500-1343

CAPILLARY ST FLOW CELL 4-8ML/MIN - 5500-1342

CAPILLARY ST 05X280 LONG SOCKET - 5500-1336

CAPILLARY ST 05X800 LONG SOCKET - 5500-1335

CAPILLARY ST 05X400 LONG SOCKET - 5500-1334

CAPILLARY ST 05X600 LONG SOCKET - 5500-1333

CAPILLARY ST 012X680 M/M - 5500-1303

CAPILLARY ST 012X340 M/M - 5500-1302

CAPILLARY ST 012X85 M/M - 5500-1300

CAPILLARY MP35N 017X250 SL/SL - 5500-1280

SPLITTER-CAPILLARY 005-ID L-1000MM - 5067-5939

FLEX CAPILLARY 05X150MM NO FITTINGS - 5022-6509

UNCOATED FUSED SILICA TUBING - 19091-21050

TUBE NICKEL 1/16IN 460MM - 18900-80255

TUBE ASSEMBLY TOOL PTFE - 18900-20850

TUBE 1/16IN SS 304 375MM LONG - 18900-20281

1/16INCH STAINLESS STEEL TUBE 400MM LONG - 18900-20280

TUBE 11 IN - 18900-20250

TUBING COLORED PTFE/04250FT 8 LENGTHS - 17-6035

TUBING COLORED PTFE/042 50FT 6LGS(3X3) - 17-6030

BIODIESEL RET GAP EN14105 AND ASTM D6594 - 160-BD65-5

FSDEACTIVATEDHI-TEMP-320MM X 5M - 160-2855-5

FSDEACTIVATED -050MM X 5M - 160-2655-5

FSDEACTIVATED -050MM X 1M - 160-2655-1

FSDEACTIVATED -050MM X10M - 160-2655-10

FSUNDEACTIVATED -050MM X10M - 160-2650-10

FSUNDEACTIVATED -075MM X 5M - 160-2644-5

FSDEACTIVATED -100MM X 1M - 160-2635-1

FSUNDEACTIVATED -100MM X 5M - 160-2634-5

FSUNDEACTIVATED -100MM X10M - 160-2634-10

FUSED SILICA DEACTIVATED - 0150MM X 1M - 160-2625-1

FUSED SILICA DEACTIVATED - 0150MM X 10 - 160-2625-10

FSUNDEACTIVATED -180MM X 5M - 160-2610-5

FSUNDEACTIVATED -180MM X10M - 160-2610-10

FSUNDEACTIVATED -530MM X 5M - 160-2530-5

FSUNDEACTIVATED -530MM X10M - 160-2530-10

FSDEACTIVATED -450MM X 5M - 160-2455-5

FSDEACTIVATED -450MM X 1M - 160-2455-1

FSDEACTIVATED -450MM X10M - 160-2455-10

FSUNDEACTIVATED -320MM X 5M - 160-2320-5

FSUNDEACTIVATED -320MM X10M - 160-2320-10

FS UNDEACTIVATED 250MM X 5M - 160-2250-5

FSDEACTIVATED -200MM X 5M - 160-2205-5

FSDEACTIVATED -200MM X 1M - 160-2205-1

FSDEACTIVATED -200MM X10M - 160-2205-10

FSUNDEACTIVATED -200MM X 5M - 160-2200-5

FSNDL STK(100MM)DEACTIVATED X 5M - 160-1010-5

FSNDL STK(100MM)DEACTIVATED X 1M - 160-1010-1

FSNDL STK(100MM)DEACTIVATED X10M - 160-1010-10

Disposable Animal Feeding Needles Flexible Plastic (Ptfe) 18G X 3inch, 2.0Mm Ball.

Drying Tube, Dessicant, Ace Glass Incorporated - 9421-10, Beaded Top Joint

400MM POROSITY E FILTER TUBE.

500MM POROSITY D FILTER TUBE.

400MM POROSITY D FILTER TUBE.

FILTER TUBE, POROSITY D FRITTED DISC, #15 ACE THREDS.

500MM POROSITY C FILTER TUBE.

400MM POROSITY C FILTER TUBE.

500MM POROSITY B FILTER TUBE.

400MM POROSITY B FILTER TUBE.

FILTER TUBE, POROSITY B FRITTED DISC, #15 ACE THREDS.

500MM POROSITY A FILTER TUBE.

400MM POROSITY A FILTER TUBE.

FILTER TUBE, POROSITY A FRITTED DISC, #15 ACE THREDS.

40ML POR D FILTER TUBE, 24/40 INNER JOINTS TOP & BOTTOM, TWO VALVE INLETS.

40ML POR D FILTER TUBE, 24/40 INNER JOINTS TOP & BOTTOM, TWO STOPCOCK INLETS.

9590 VIAL, Conical bottom, threaded joint. 1ML HEAVY WALL VIAL, CONICAL BOTTOM, 7/10 OUTER JOINT EXTERNALLY THREADED.

9586 TUBE, Capillary Gas Delivery. CAPILLARY TUBE,GAS DELIV 14/10 JOINTS.

9586 TUBE, Capillary Gas Delivery. CAPILLARY TUBE 10/10JT GAS DELIVERY.

9586 TUBE, Capillary Gas Delivery. TUBE CAPILLARY GAS DELIV 7/10M.

9584 TUBE, Drying. TUBE, DRYING 14/10.

9584 TUBE, Drying. 10/10JT DRYING TUBE 90 DEGREE.

9584 TUBE, Drying. TUBE DRYING 7/10M.

9581 TUBE, Craig Recrystallization. PTFE INNER PLUG, CRAIG.

9581 TUBE, Craig Recrystallization. GLASS PLUG CRAIG.

9581 TUBE, Craig Recrystallization. 2ML GLASS OUTER CRAIG.

9581 TUBE, Craig Recrystallization. 1ML GLASS OUTER CRAIG.

9581 TUBE, Craig Recrystallization. TUBE CRAIG 1ML.

9581 TUBE, Craig Recrystallization. TUBE CRAIG 2ML.

9579 TUBE, GC Collection. TUBE, GC COLLECTION 5/5M.

9419 TUBES, Drying. 14/20 DRYING TUBE.

9420 TUBES, Drying. 19/22 DRYING TUBE.

9421 DRYING TUBE. 14/20 DRYING TUBE.

9420 TUBES, Drying. 14/20 DRYING TUBE.

Plasticrit Plastic Hematocrit Tubes. Provides the identical capillary action as glass hematocrit tubes.They eliminate the possibility of contamination due to breakage with no compromise in accuracy. These 75mm polycarbonate pipets are heparinized.

Plasticrit Plastic Hematocrit Tubes. Provides the identical capillary action as glass hematocrit tubes.They eliminate the possibility of contamination due to breakage with no compromise in accuracy. 75mm polycarbonate pipets. Complies with FDA, NIOSH, CDC, and OSHA safety reommendations. Case is 5 vials of 200 tubes.

8683 TEST TUBE, Quartz (without Lip). QUARTZ TEST TUBE.

8664 TUBE, Thief, Sampling. 40 X 1 OD THIEF TUBE, CS/6.

8651 TUBE, Pressure, Diehls-Adler. 100ML PRESSURE TUBE.

8650 TUBE, Pressure, Diehls-Adler. 20.3CM (8) PRESSURE TUBE.

8650 TUBE, Pressure, Diehls-Adler. 15.2 (6) PRESSURE TUBE.

8650 TUBE, Pressure, Diehls-Adler. 10.2CM (4) PRESSURE TUBE.

PRESSURE TUBE 48ML38.1M10.2CM C#15. TUBE, PRESSURE, 48ML, 150psi, 38.1MMOD, 10.2CM LONG, COMPLETE WITH #15 BACK-SEAL PLUG

PRESSURE TUBE 120ML38.1M20.3CM C#15. TUBE, PRESSURE, 120ML, 150psi, 38.1MMOD, 20.3CM LONG, COMPLETE WITH #15 BACK-SEAL PLUG

PRESSURE TUBE 185ML38.1M30.5CM C#15. TUBE, PRESSURE, 185ML, 150psi, 38.1MMOD, 30.5CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 120ML38.1M20.3CM C#15. TUBE, PRESSURE, 120ML, 150psi, 38.1MMOD, 20.3CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 38ML25.4M20.3CM C#15. TUBE, PRESSURE, 38ML, 150psi, 25.4MMOD, 20.3CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 100ML38.1M17.8CM C#15. TUBE, PRESSURE, 100ML, 150psi, 38.1MMOD, 17.8CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 35ML25.4M17.8CM C#15. TUBE, PRESSURE, 35ML, 150psi, 25.4MMOD, 17.8CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 15ML25.4M10.2CM C#15. TUBE, PRESSURE, 15ML, 150psi, 25.4MMOD, 10.2CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 27ML19M30.5CM C#7. TUBE, PRESSURE, 27ML, 150psi, 19MMOD, 30.5CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 3ML8M30.5CM C#7. TUBE, PRESSURE, 3ML, 150psi, 8MMOD, 30.5CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 8ML13M20.3CM C#7. TUBE, PRESSURE, 8ML, 150psi, 13MMOD, 20.3CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 2ML8M20.3CM C#7 FS P. TUBE, PRESSURE, 2ML, 150psi, 8MMOD, 20.3CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 9ML19M10.2CM C#7. TUBE, PRESSURE, 9ML, 150psi, 19MMOD, 10.2CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 4ML13M10.2CM C#7. TUBE, PRESSURE, 4ML, 150psi, 13MMOD, 10.2CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUNGER VALVE

PRESSURE TUBE 1ML8M10.2CM C#7. TUBE, PRESSURE, 1ML, 150psi, 8MMOD, 10.2CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUNGER VALVE

TEMPERATURE MEAS PARRTYPE I. HYDROGENATION TEMPERATURE MEASUREMENT UNIT FOR USE WITH 7482 PARR TYPE I

PRESSURE TUBE ONLY 15ML#7 13M 30.5CM NP. TUBE ONLY, PRESSURE, 15ML, #7, 13MMOD, 30.5CM LONG, NO PLUG

PRESSURE TUBE ONLY 3ML#7 8M 30.5CM NP. TUBE ONLY, PRESSURE, 3ML, #7, 8MMOD, 30.5CM LONG, NO PLUG

PRESSURE TUBE ONLY 9ML#7 13M 20.3CM NP. TUBE ONLY, PRESSURE, 9ML, #7, 13MMOD, 20.3CM LONG, NO PLUG

PRESSURE TUBE ONLY 2.5ML#7 8M 20.3CM NP. TUBE ONLY, PRESSURE, 2.5ML, #7, 8MMOD, 20.3CM LONG, NO PLUG

PRESSURE TUBE ONLY 9ML#7 19M 10.2CM NP. TUBE ONLY, PRESSURE, 9ML, #7, 19MMOD, 10.2CM LONG, NO PLUG

PRESSURE TUBE ONLY 1ML#7 8M 10.2CM NP. TUBE ONLY, PRESSURE, 1ML, #7, 8MMOD, 10.2CM LONG, NO PLUG

PRESSURE TUBE 2.5ML8M20.3CM C#7. TUBE, PRESSURE, 2.5ML, 150psi, 8MMOD, 20.3CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUG

PRESSURE TUBE ONLY 185ML#15 38.1M 30.5NP. TUBE ONLY, PRESSURE, 185ML, #15, 38.1MMOD, 30.5CM LONG, NO PLUG

PRESSURE BOTTLE 1850ML60PSIC#36. BOTTLE, PRESSURE, 1850ML, 60psi, COMPLETE WITH #36 BACK-SEAL PLUG

PRESSURE BOTTLE 950ML60PSIC#36. BOTTLE, PRESSURE, 950ML, 60psi, COMPLETE WITH #36 FRONT-SEAL PLUG

PRESSURE BOTTLE 325ML60PSIC#36. BOTTLE, PRESSURE, 325ML, 60psi, COMPLETE WITH #36 BACK-SEAL PLUG

PRESSURE BOTTLE 325ML60PSIC#36. BOTTLE, PRESSURE, 325ML, 60psi, COMPLETE WITH #36 FRONT-SEAL PLUG

PRESSURE TUBE ONLY 38ML#15 25.4M 20.3 NP. TUBE ONLY, PRESSURE, 38ML, #15, 25.4MMOD, 20.3CM LONG, NO PLUG

PRESSURE BOTTLE 1850ML60PSIC#25. BOTTLE, PRESSURE, 1850ML, 60psi, COMPLETE WITH #25 FRONT-SEAL PLUG

PRESSURE BOTTLE 950ML60PSIC#25. BOTTLE, PRESSURE, 950ML, 60psi, COMPLETE WITH #25 FRONT-SEAL PLUG

PRESSURE BOTTLE 75ML60PSIC#25. BOTTLE, PRESSURE, 75ML, 60psi, COMPLETE WITH #25 BACK-SEAL PLUG

PRESSURE BOTTLE 75ML60PSIC#25. BOTTLE, PRESSURE, 75ML, 60psi, COMPLETE WITH #25 FRONT-SEAL PLUG

PRESSURE BOTTLE 175ML60PSIC#25. BOTTLE, PRESSURE, 175ML, 60psi, COMPLETE WITH #25 BACK-SEAL PLUG

PRESSURE BOTTLE 25ML60PSIC#7. BOTTLE, PRESSURE, 25ML, 60psi, COMPLETE WITH #7 FRONT-SEAL PLUG

PRESSURE BOTTLE 14ML60PSIC#7. BOTTLE, PRESSURE, 14ML, 60psi, COMPLETE WITH #7 FRONT-SEAL PLUG

PRESSURE BOTTLE 8ML60PSIC#7. BOTTLE, PRESSURE, 8ML, 60psi, COMPLETE WITH #7 FRONT-SEAL PLUG

PRESSURE TUBE 2ML8M17.8CM C#7. TUBE, PRESSURE, 2ML, 150psi, 8MMOD, 17.8CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUG

PLUNGER VALVE#15 3/8 TUBE END. PLUNGER VALVE, #15, 3/8in TUBE END

PRESSURE TUBE ONLY 300ML#36 50M 30.5 NP. TUBE ONLY, PRESSURE, 300ML, #36, 50MMOD, 30.5CM LONG, NO PLUG

PRESSURE TUBE ONLY 200ML#36 50M 20.3 NP. TUBE ONLY, PRESSURE, 200ML, #36, 50MMOD, 20.3CM LONG, NO PLUG

PRESSURE BOTTLE ONLY 1850ML#36NP. BOTTLE ONLY, PRESSURE, 1850ML, #36, NO PLUG

PRESSURE BOTTLE ONLY 950ML#36NP. BOTTLE ONLY, PRESSURE, 950ML, #36, NO PLUG

PRESSURE BOTTLE ONLY 325ML#36NP. BOTTLE ONLY, PRESSURE, 325ML, #36, NO PLUG

PRESSURE TUBE ONLY 90ML#3650M 10.2CM NP. TUBE ONLY, PRESSURE, 90ML, #36, 50MMOD, 10.2CM LONG, NO PLUG

PRESSURE BOTTLE ONLY P-VALVE #15 O-RING. BUSHING ONLY, PLUNGER VALVE, #15, O-RING INCLUDED

PRESSURE TUBE ONLY 60ML#25 38.1M 10.2 NP. TUBE ONLY, PRESSURE, 60ML, #25, 38.1MMOD, 10.2CM LONG, NO PLUG

PRESSURE TUBE 185ML38.1M30.5CM C#15. TUBE, PRESSURE, 185ML, 150psi, 38.1MMOD, 30.5CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE WITH THERMOWELL

PRESSURE TUBE 60ML25.4M30.5CM C#15. TUBE, PRESSURE, 60ML, 150psi, 25.4MMOD, 30.5CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE WITH THERMOWELL

PRESSURE TUBE 120ML38.1M20.3CM C#15. TUBE, PRESSURE, 120ML, 150psi, 38.1MMOD, 20.3CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE WITH THERMOWELL

PRESSURE TUBE 38ML25.4M20.3CM C#15. TUBE, PRESSURE, 38ML, 150psi, 25.4MMOD, 20.3CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE WITH THERMOWELL

PRESSURE TUBE 100ML38.1M17.8CM C#15. TUBE, PRESSURE, 100ML, 150psi, 38.1MMOD, 17.8CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE WITH THERMOWELL

PRESSURE TUBE 35ML25.4M17.8CM C#15. TUBE, PRESSURE, 35ML, 150psi, 25.4MMOD, 17.8CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE WITH THERMOWELL

PRESSURE TUBE 48ML38.1M10.2CM C#15. TUBE, PRESSURE, 48ML, 150psi, 38.1MMOD, 10.2CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUNGER VALVE WITH THERMOWELL

PRESSURE TUBE ONLY 210ML#25 38.1M 30.5NP. TUBE ONLY, PRESSURE, 210ML, #25, 38.1MMOD, 30.5CM LONG, NO PLUG

PRESSURE TUBE ONLY 140ML#25 38.1M 20.3NP. TUBE ONLY, PRESSURE, 140ML, #25, 38.1MMOD, 20.3CM LONG, NO PLUG

PRESSURE TUBE ONLY 120ML#25 38.1M 17.8NP. TUBE ONLY, PRESSURE, 120ML, #25, 38.1MMOD, 17.8CM LONG, NO PLUG

PRESSURE BOTTLE ONLY P-VALVE#7 O-RING. BUSHING ONLY, PLUNGER VALVE, #7, O-RING INCLUDED

PRESSURE BOTTLE ONLY 325ML#25NP. BOTTLE ONLY, PRESSURE, 325ML, #25, NO PLUG

PRESSURE BOTTLE ONLY 175ML#25NP. BOTTLE ONLY, PRESSURE, 175ML, #25, NO PLUG

PRESSURE TUBE 60ML38.1M10.2CM C#25. TUBE, PRESSURE, 60ML, 150psi, 38.1MMOD, 10.2CM LONG, COMPLETE WITH #25 BACK-SEAL PLUG

PRESSURE BOTTLE ONLY PRSR75ML#25NOPLUG. BOTTLE ONLY, PRESSURE, 75ML, #25, NO PLUG

PRESSURE TUBE ONLY 18ML#7 19M 17.8CM NP. TUBE ONLY, PRESSURE, 18ML, #7, 19MMOD, 17.8CM LONG, NO PLUG

PRESSURE TUBE ONLY 8ML#7 13M 17.8CM NP. TUBE ONLY, PRESSURE, 8ML, #7, 13MMOD, 17.8CM LONG, NO PLUG

PRESSURE TUBE ONLY 2ML#7 8M 17.8CM NP. TUBE ONLY, PRESSURE, 2ML, #7, 8MMOD, 17.8CM LONG, NO PLUG

PRESSURE TUBE 300ML50M30.5CM C#36. TUBE, PRESSURE, 300ML, 150psi, 50MMOD, 30.5CM LONG, COMPLETE WITH #36 BACK-SEAL PLUG

PRESSURE BOTTLE ONLY PRESR25ML#7 NOPLUG. BOTTLE ONLY, PRESSURE, 25ML, #7, NO PLUG

PRESSURE TUBE 200ML50M20.3CM C#36. TUBE, PRESSURE, 200ML, 150psi, 50MMOD, 20.3CM LONG, COMPLETE WITH #36 BACK-SEAL PLUG

PRESSURE BOTTLE ONLY PRESR14ML#7 NOPLUG. BOTTLE ONLY, PRESSURE, 14ML, #7, NO PLUG

PRESSURE TUBE 170ML50M17.8CM C#36. TUBE, PRESSURE, 170ML, 150psi, 50MMOD, 17.8CM LONG, COMPLETE WITH #36 BACK-SEAL PLUG

PRESSURE TUBE 170ML50M17.8CM C#36. TUBE, PRESSURE, 170ML, 150psi, 50MMOD, 17.8CM LONG, COMPLETE WITH #36 FRONT-SEAL PLUG

PRESSURE BOTTLE ONLY 8ML#7 NOPLUG. BOTTLE ONLY, PRESSURE, 8ML, #7, NO PLUG

PRESSURE TUBE 90ML50M10.2CM C#36. TUBE, PRESSURE, 90ML, 150psi, 50MMOD, 10.2CM LONG, COMPLETE WITH #36 BACK-SEAL PLUG

PRESSURE TUBE 90ML50M10.2CM C#36. TUBE, PRESSURE, 90ML, 150psi, 50MMOD, 10.2CM LONG, COMPLETE WITH #36 FRONT-SEAL PLUG

PRESSURE TUBE 210ML38.1M30.5CM C#25. TUBE, PRESSURE, 210ML, 150psi, 38.1MMOD, 30.5CM LONG, COMPLETE WITH #25 BACK-SEAL PLUG

PRESSURE TUBE 140ML38.1M20.3CM C#25. TUBE, PRESSURE, 140ML, 150psi, 38.1MMOD, 20.3CM LONG, COMPLETE WITH #25 BACK-SEAL PLUG

PLUNGER VALVE T-WELL30.5CM. PLUNGER VALVE, T-WELL, 30.5CM

PRESSURE TUBE 120ML38.1M17.8CM C#25. TUBE, PRESSURE, 120ML, 150psi, 38.1MMOD, 17.8CM LONG, COMPLETE WITH #25 BACK-SEAL PLUG

PLUNGER VALVE T-WELL20.3CM. PLUNGER VALVE, T-WELL, 20.3CM

PLUNGER VALVE T-WELL17.8CM. PLUNGER VALVE, T-WELL, 17.8CM

PRESSURE TUBE 185ML38.1M30.5CM C#15. TUBE, PRESSURE, 185ML, 150psi, 38.1MMOD, 30.5CM LONG, COMPLETE WITH #15 BACK-SEAL PLUG

PRESSURE TUBE 185ML38.1M30.5CM C#15. TUBE, PRESSURE, 185ML, 150psi, 38.1MMOD, 30.5CM LONG, COMPLETE WITH #15 FRONT-SEAL PLUG

PLUNGER VALVE T-WELL10.2CM. PLUNGER VALVE, T-WELL, 10.2CM

PRESSURE TUBE 60ML25.4M30.5CM C#15. TUBE, PRESSURE, 60ML, 150psi, 25.4MMOD, 30.5CM LONG, COMPLETE WITH #15 BACK-SEAL PLUG

PRESSURE TUBE 1ML8M10.2CM C#7. TUBE, PRESSURE, 1ML, 150psi, 8MMOD, 10.2CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUG

PRESSURE TUBE 38ML25.4M20.3CM C#15. TUBE, PRESSURE, 38ML, 150psi, 25.4MMOD, 20.3CM LONG, COMPLETE WITH #15 BACK-SEAL PLUG

PRESSURE TUBE 35ML25.4M17.8CM C#15. TUBE, PRESSURE, 35ML, 150psi, 25.4MMOD, 17.8CM LONG, COMPLETE WITH #15 BACK-SEAL PLUG

8531 TUBES, Drying, Schwartz. 17 X 150MM TUBE SCHWARTZ.

8531 TUBES, Drying, Schwartz. 17 X 100MM TUBES SCHWARTZ.

8450 COLOR STABILITY TUBE. TUBE.

8450 COLOR STABILITY TUBE. STOPPER.

7617 O-RING - Rodaviss. 29/42 NITRILE O-RING RODAVISS JOINTS.

7616 CAP, Joint, with Hole - Rodaviss. 45/50 CAP RODAVISS W/HOLE.

7616 CAP, Joint, with Hole - Rodaviss. 29/42 CAP RODAVISS W/HOLE.

7616 CAP, Joint, with Hole - Rodaviss. 19/22 CAP RODAVISS W/HOLE.

7616 CAP, Joint, with Hole - Rodaviss. 14/20 CAP RODAVISS W/HOLE.

7612 JOINTS - Rodaviss. 45/50 OUTER RODAVISS.

7612 JOINTS - Rodaviss. 45/50 INNER RODAVISS.

7612 JOINTS - Rodaviss. 29/42 OUTER RODAVISS.

7612 JOINTS - Rodaviss. 29/42 INNER RODAVISS.

7612 JOINTS - Rodaviss. 14/20 OUTER RODAVISS.

7612 JOINTS - Rodaviss. 14/20 INNER RODAVISS.

6448 MANIFOLD, Pressure, Epoxy Coated. EPOXY COATED MANIFOLD ONLY.

5844 ADAPTER, Nylon or PTFE, NPT, Tubing to Ace-Thred. 25MM 1/4 PTFE ADAPTER.

GAS DISPERSION TUBE, FRITTED. Porosity: Coarse. Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D.x20mm long. Overall length is approximately 10in.

GAS DISPERSION TUBE, FRITTED. Porosity: Medium. Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D.x20mm long. Overall length is approximately 10in.

GAS DISPERSION TUBE, FRITTED. Porosity: Fine. Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D.x20mm long. Overall length is approximately 10in.

SCREW THREAD TUBE, GL. Tubing Dimensions O.D.xWall: 40x2.3mm. OAL: 100. Thread Size: 45. O.D: 44.50. Height: 26.0. I.D: 34.5. Tubing: 40.0. Screw thread tube for replacement on apparatus using the GL thread which is manufactured to I.S.O. specifications. (GL is the I.S.O.

SCREW THREAD TUBE, GL. Tubing Dimensions O.D.xWall: 28x2.0mm. OAL: 100. Thread Size: 32. O.D: 31.50. Height: 16.0. I.D: 23.0. Tubing: 28.0. Screw thread tube for replacement on apparatus using the GL thread which is manufactured to I.S.O. specifications. (GL is the I.S.O.

SCREW THREAD TUBE, GL. Tubing Dimensions O.D.xWall: 22x1.8mm. OAL: 100. Thread Size: 25. O.D: 24.50. Height: 18.5. I.D: 18.0. Tubing: 22.0. Screw thread tube for replacement on apparatus using the GL thread which is manufactured to I.S.O. specifications. (GL is the I.S.O.

SCREW THREAD TUBE, GL. Tubing Dimensions O.D.xWall: 16x1.8mm. OAL: 100. Thread Size: 18. O.D: 17.50. Height: 15.5. I.D: 11.0. Tubing: 16.0. Screw thread tube for replacement on apparatus using the GL thread which is manufactured to I.S.O. specifications. (GL is the I.S.O.

SCREW THREAD TUBE, GL. Tubing Dimensions O.D.xWall: 12x1.5mm. OAL: 100. Thread Size: 14. O.D: 13.75. Height: 12.0. I.D: 8.45. Tubing: 12.0. Screw thread tube for replacement on apparatus using the GL thread which is manufactured to I.S.O. specifications. (GL is the I.S.O.

MELTING POINT TUBE, CLOSED ONE END. 0.8-1.1mm O.D.x0.25 wall tubes, Vial of 100. Similar to CG-1840, but closed at one end. Tube is manufactured from borosilicate glass and packaged 100 tubes per vial. The Code -02 has a smaller I.D. to conform to U.S.P. XXI requirements.

MELTING POINT TUBE, CLOSED ONE END. 1.5-1.8mm O.D.x0.20 wall tubes, Vial of 100. Similar to CG-1840, but closed at one end. Tube is manufactured from borosilicate glass and packaged 100 tubes per vial. The Code -02 has a smaller I.D. to conform to U.S.P. XXI requirements.

MELTING POINT TUBE, OPEN BOTH ENDS. 0.8-1.1mm O.D.x0.25 wall tubes, Vial of 100. Tube is manufactured from borosilicate glass and packaged 100 tubes per vial. The Code-02 has a smaller I.D. to conform to U.S.P XXI requirements.

MELTING POINT TUBE, OPEN BOTH ENDS. 1.5-1.8mm O.D.x0.20 wall tubes, Vial of 100. Tube is manufactured from borosilicate glass and packaged 100 tubes per vial. The Code-02 has a smaller I.D. to conform to U.S.P XXI requirements.

TLC Spotting Capillary Tubes. Length: 10.2cm. Noncalibrated tubes made from borosilicate glass for use with aqueous and organic solutions. Packed in 0.23kg package.

Wrapped Hematocrit Tube, Heparin coated. HEMATO-CLAD Mylar Wrapped Hematocrit Tube, Heparin Coated, Color: Red, reduces the occurrence of accidental breakage. In the event of breakage, helps contain the blood sample and protects against cuts from broken glass

BULB 13/16MM FOR CAPILLARY TUBES CS100 - 51674

4IN BOROSIL GL FIL/7 BRL 1.2MM PK75 - 7B120F-4

6IN BOROSIL GL FIL/7 BRL 1.0MM PK60 - 7B100F-6

4IN BOROSIL GL FIL/7 BRL 1.0MM PK60 - 7B100F-4

4IN BOROSIL GL FIL/5 BRL 1.2MM PK65 - 5B120F-4

4IN BOROSIL GL FIL/3 BRL PK100 - 3B120F-4

PV850 CAPILLARY KIT - 300753

EPUMP CAPILLARY KIT - 300744

6IN BOROSIL GL FIL/2 BRL PK100 - 2B150F-6

4IN BOROSIL GL FIL/2 BRL PK100 - 2B150F-4

6IN BOROSIL GL FIL 2MM OD PK125 - 1B200F-6

4IN BOROSIL GL FIL 2MM OD PK125 - 1B200F-4

6IN BOROSIL GL2MM OD PK125 - 1B200-6

4IN BOROSIL GL 2MM OD PK200 - 1B200-4

6IN BOROSIL GL W/FIL 1.5MM OD PK225 - 1B150F-6

4IN BOROSIL GL W/FIL 1.5MM OD PK300 - 1B150F-4

3IN BOROSIL GL W/FIL 1.5MM OD PK225 - 1B150F-3

6IN BOROSIL GL 1.5MM OD PK225 - 1B150-6

4IN BOROSIL GL 1.5MM OD PK300 - 1B150-4

3IN BOROSIL GL 1.5MM OD PK300 - 1B150-3

6IN BOROSIL GL W/FIL 1.2MM OD PK350 - 1B120F-6

4IN BOROSIL GL W/FIL 1.2MM OD PK400 - 1B120F-4

3IN BOROSIL GL W/FIL 1.2MM OD PK350 - 1B120F-3

6IN BOROSIL GL 1.2MM OD PK350 - 1B120-6

4IN BOROSIL GL 1.2MM OD PK350 - 1B120-4

3IN BOROSIL GL 1.2MM OD PK350 - 1B120-3

6IN BOROSIL GL W/FIL 1.0MM OD PK500 - 1B100F-6

4IN BOROSIL GL FIL 1.0MM OD PK500 - 1B100F-4

3IN BOROSIL GL FIL 1.0MM OD PK500 - 1B100F-3

6IN BOROSIL GL 1.0MM OD PK500 - 1B100-6

4IN BOROSIL GL 1.0MM OD PK500 - 1B100-4

3IN BOROSIL GL 1.0MM OD PK500 - 1B100-3

MINIVETTE POCT 20UL EDTA PURPLE PK200 - 17.2113.120

DISPENSER SAFEPETTE MANUAL 1/BX - SD2050

CAPILLARY TUBE PLAIN APPROX 55UL 2000/BX - P75-2000M

CAPILLARY TUBE ORGANIZER 6/PK - CTO-10

CAPILLARY TUBE PRECALIBRATD ~55UL BX2000 - R60-2000M

TUBING .010ID .0625OD 30CM BLU STRIP PK5 - 47305-25-30

TUBING .010ID .0625OD 20CM BLU STRIP PK5 - 47305-25-20

TUBING .010ID .0625OD 10CM BLU STRIP PK5 - 47305-25-10

TUBING .005ID .0625OD 30CM RED STRIP PK5 - 47305-13-30

TUBING .005ID .0625OD 20CM RED STRIP PK5 - 47305-13-20

TUBING .005ID .0625OD 10CM RED STRIP PK5 - 47305-13-10

Rack Culture Tube 303 SS W/Clips 16Mm. Culture Tube Rack, is designed for roller culture tubes, material: 303 stainless steel construction, Includes spring clips that prevent tubes from moving in the rack, 16mm

Thermowell Assembly 316L SS 36L 10 1/2In. Thermowell Assembly, for 1965 And 1967-Style Angled Sidearm Flasks, 3-Port, 5/16in OD Thermowell Tube,1/4in Siphon And Vent Tubes, Includes 45mm Polypropylene Cap And Silicone Gasket, 316 L Stainless Steel 32 Ra Finish, Tube Length: 10 1/2in, Size: 36L

Thermowell Assembly 316L SS 15L 12-3/4In. Thermowell Assembly, for 1965 And 1967-Style Angled Sidearm Flasks, 3-Port, 5/16in OD Thermowell Tube,1/4in Siphon And Vent Tubes, Includes 45mm Polypropylene Cap And Silicone Gasket, 316 L Stainless Steel 32 Ra Finish, Tube Length: 12 3/4in, Size: 15L

Thermowell Assembly 316L SS 6L 10-7/8In. Thermowell Assembly, for 1965 And 1967-Style Angled Sidearm Flasks, 3-Port, 5/16in OD Thermowell Tube,1/4in Siphon And Vent Tubes, Includes 45mm Polypropylene Cap And Silicone Gasket, 316 L Stainless Steel 32 Ra Finish, Tube Length: 10 7/8in, Size: 8L

Thermowell Assembly 316L SS 6L 10-1/2In. Thermowell Assembly, for 1965 And 1967-Style Angled Sidearm Flasks, 3-Port, 5/16in OD Thermowell Tube,1/4in Siphon And Vent Tubes, Includes 45mm Polypropylene Cap And Silicone Gasket, 316 L Stainless Steel 32 Ra Finish, Tube Length: 10 1/2in, Size: 6L

Thermowell Assembly 316L SS 3L 6In. Thermowell Assembly, for 1965 And 1967-Style Angled Sidearm Flasks, 3-Port, 5/16in OD Thermowell Tube,1/4in Siphon And Vent Tubes, Includes 45mm Polypropylene Cap And Silicone Gasket, 316 L Stainless Steel 32 Ra Finish, Longest Tube Length: 6in, Size: 3L

Thermowell Assembly 316L SS 1L 4In. Thermowell Assembly, for 1965 And 1967-Style Angled Sidearm Flasks, 3-Port, 5/16in OD Thermowell Tube,1/4in Siphon And Vent Tubes, Includes 45mm Polypropylene Cap And Silicone Gasket, 316 L Stainless Steel 32 Ra Finish, Longest Tube Length:4in, Size: 1L

Quad Additon Assembly 45Mm Universal. Quad Additon Assembly, 45mm, Universal, for Gl45 Sidearms, Material: 316l SS With Electropolish Finish, Ra 32 Or Better,Outside only, Supply With PP Blue Open Top S/Cap & White Silicone Liner, Insertion Length: 3-3/32in, Dimension: 1/4in Od x 4 1/4in Long

Iob Assembly Low Profile for 3L Vessel. Low Profile IOB Assembly, uses smooth bearing action and fits under the 100mm screw cap with PTFE cap seal and silicone gasket. Allows for smoother and better mixing inside the spinner flasks, Size: 3l

Thermowell Assembly Lw Profile 3L Vessel. Low Profile Thermowell Assembly, 45mm, for 3l Vessel, Seam Welded - Electropolish Finish, 316L SS Material Ra 32 Finish Or Better, Thermowell Tube: 5/16inOD x0.242inID X 1.0in, Fill Tube: 1/4inOD x0.152inID X 1.0in, Vent Tube:.250inOD x0.152inID X 1.0in

Triple/Quad Addition Assembly Universal. Triple & Quad Addition Assembly, Universal, Material: 316L SS with electropolish finish RA 32 or better inside and out, Used for Gl45 Sidearms, Includes polypropylene blue open top screw cap & white silicone liner, with Individual ports, Size: 45mm

Blade Assembly Pitch L/H Stainless Steel. L/H Stainless Steel Pitch Blade Impeller Assembly for 10 liter Vessels, Material: 316L Stainless Steel with Electropolish Finish, Left Hand, Dimensions: 3-1/4in, Usually Requires 2 Each

Blade Assembly Pitch R/H Stainless Steel. Stainless Steel pitch blade for 10L bioreactor systems. Right hand upward, Material: 316L Stainless Steel, Size: 3-1/4in

Cooling Coil Stainless Steel 17-5/8In. Stainless Steel Cooling Coil, for cell culture temperature manipulation within the 10l bioreactor vessel, Material: 316L Stainless Steel, Tubing: 5/16in, Overall Length: 17 5/8in, Coil: 4 5/8:, Number of Turns: 5

Port Assembly Sample 3/8In 3L Bioreactor. Sample Port Assembly, Stainless Steel, Ideal for 3l bioreactors, Fits 3/8in hole, Material: stainless steel 316l, Dimensions: 9 3/16in oal, Insertion length: 7 3/4in, Tube: 1/4in od x 5/32in id with ra finish, with hose barb

Port Plug Assembly, 3/8in, Used in 3, 7, and 10L Bioreactors, Includes O-Ring and Hex Nut.

Port Plug Assembly, 3/4in, Used in 3, 7, and 10L Bioreactors, Includes O-Ring and Hex Nut.

Port Plug Stainless Stl 1/4In Headplate. Stainless steel port plug, fits onto stainless steel head plate for 3 & 7 liter bioreactor vessel, Material: 316l SST with electropolish finish, 1/2-20 tpi threads, for 3l & 7l bioreactor systems - English threads, for 1/4in port on headplate

Port Plug Stainless Stl 1/2In Headplate. Stainless steel port plug, fits onto stainless steel head plate for 10 liter bioreactor vessel, 316l stainless steel with electropolish finish, 1/2-20 tpi threads, for 10l bioreactor systems - English threads, for 1/2in port on headplate

Gas Liquid Additon Assembly Autclv 45Mm. Gas Liquid Addition Assembly 45mm for Vertical Sidearm Vessels, seals with a silicone liner, autoclavable, Glass Addition Tube Type 1 A Borosilicate Glass, Compression Cap, Front/Rear Nylon Ferrule, Compression Fitting, One Blue PP Screw Cap/ Silicone Liner

Tube Plaintop Leighton Shrt 19X95Mm CS36. Plain Top Leighton Tube Short Style, Material: Type 1 Class A Borosilicate Glass, Tube Dimensions: 19x95mm, Window Size: 14x55mm, Cover-Slip: 13x27mm 13x54mm, Stopper Size: no. 2, Short neck allows easy entry & removal of cover slips, fit Self-Locking Racks

Glue Rtv Red No 106 2.8Oz F/Silicone Pad. RTV Red Glue, Number 106, Used for replacing silicone pads in pipette cans. Easy to use nozzle and adheres to SS aluminum, glass, and rigid plastics, Curing Time: 24 Hours, Temperature Range: 60 to 260C, Storage Conditions: Below 27C, Size: 2.8oz

Tube Pressure No36 Top 500Ml 30.5Cm Long. Tube, Pressure, 500Ml, Number 36 Top, Number 7 Sample Port, 60Mm Od, 30.5Cm Long, Complete With Back-Seal Plugs

Tube Pressure No 36Top 500Ml 30.5Cm Long. Tube, Pressure, 500Ml, Number 36 Top, Number 7 Sample Port, 60Mm Od, 30.5Cm Long, Complete With Front-Seal Plugs

Tube Only Number36 Top 500Ml 30.5Cm Long. Tube Only, Pressure, 500Ml, Number 36 Top, Number 7 Sample Port, 60Mm Od, 30.5Cm Long, No Plugs

Tube Only, Pressure, 500Ml, Number 36, 60Mmod, 30.5Cm Long, No Plug.

Tube Pressure 36 Back-Seal Plug 500Ml. Tube, Pressure, 500Ml, 150Psi, 60Mmod, 30.5Cm Long, Complete With Number 36 Back-Seal Plug

Wireless Tube Rack 13Mm Half Size Orange. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Orange, Size: 13MM Half size

Wireless Tube Rack 13Mm Half Sz Magenta. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Magenta, Size: 13MM Half size

Wireless Tube Rack 13Mm Half Size Green. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Green, Size: 13MM Half size

Wireless Tube Rack 13Mm Half Size Blue. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Blue, Size: 13MM Half size

Wireless Tube Rack 13Mm Full Size Yellow. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Yellow, Size: 13MM Full size

Wireless Tube Rack 13Mm Full Size White. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: White, Size: 13MM Full size

Wireless Tube Rack 13 Mm Full Size Red. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Red, Size: 13MM Full size

Wireless Tube Rack 13Mm Full Size Orange. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Orange, Size: 13MM Full size

Wireless Tube Rack 13Mm Full Sz Magenta. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Magenta, Size: 13MM Full size

Wireless Tube Rack 13Mm Full Size Green. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Green, Size: 13MM Full size

Wireless Tube Rack 13Mm Full Size Blue. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Blue, Size: 13MM Full size

Rfid Label F/Captrack Ct-1 And Ct-2PK10.

Wireless Tube Rack 13Mm Half Size Yellow. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Yellow, Size: 13MM Half size

Wireless Tube Rack 13Mm Half Size White. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: White, Size: 13MM Half size

Wireless Tube Rack 13 Mm Half Size Red. Wireless tube rack, Fully Autoclavable, Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust, Good temperature and chemical resistance, Large, flat endplates for labeling, Color: Red, Size: 13MM Half size

Tubing Connection, Outer Diameter: 1/2in, Port Size: 1/2in NPT, Material: Polypropylene, Designed for secure leak-resistant connections

Tubing Connection, Outer Diameter: 3/8in, Port Size: 1/2in NPT, Material: Polypropylene, Designed for secure leak-resistant connections

Tubing Connection, Outer Diameter: 1/2in, Port Size: 1/4in NPT, Material: Polypropylene, Designed for secure leak-resistant connections

Tubing Connection, Outer Diameter: 3/8in, Port Size: 1/4in NPT, Material: Polypropylene, Designed for secure leak-resistant connections

Tubing Connection, Outer Diameter: 5/16in, Port Size: 1/4in NPT, Material: Polypropylene, Designed for secure leak-resistant connections

Barbed Tubing Connection, Inner Diameter: 3/4in, Port Size: 1/2in NPT, Material: Polypropylene, Wrap NPT threads 3 to 4 times with PTFE tape and wrench tighten for leak-resistant connection

Barbed Tubing Connection, Inner Diameter: 5/8in, Port Size: 1/2in NPT, Material: Polypropylene, Wrap NPT threads 3 to 4 times with PTFE tape and wrench tighten for leak-resistant connection

Tubing Connection Port 1/4-28 Rd 1.8-2Mm. Tubing Connection, Outer Diameter: 1.8-2.0mm, Port Size: 1/4-28, Color: Red, Material: Polypropylene fitting, Green Tefzel ferrule

Tubing Connection Port 1/4-28 Gr 1/16In. Tubing Connection, Outer Diameter: 1/16in, Port Size: 1/4-28, Color: Green, Material: Polypropylene fitting, Blue Tefzel ferrule

Tubing Connection Port5/16-24 Wht 3/16In. Tubing Connection, Outer Diameter: 3/16in, Port Size: 5/16-24, Color: white, Material: Delrin fitting, blue Tefzel ferrule

Barbed Tubing Connection, Inner Diameter: 1/4in, Port Size: 1/2in NPT, Material: Polypropylene, Wrap NPT threads 3 to 4 times with PTFE tape and wrench tighten for leak-resistant connection

Barbed Tubing Connection, Inner Diameter: 3/8in, Port Size: 1/8in NPT, Material: Polypropylene, Wrap NPT threads 3 to 4 times with PTFE tape and wrench tighten for leak-resistant connection

Barbed Tubing Connection, Inner Diameter: 5/16in, Port Size: 1/8in NPT, Material: Polypropylene, Wrap NPT threads 3 to 4 times with PTFE tape and wrench tighten for leak-resistant connection

Barbed Tubing Connection, Inner Diameter: 1/4in, Port Size: 1/8in NPT, Material: Polypropylene, Wrap NPT threads 3 to 4 times with PTFE tape and wrench tighten for leak-resistant connection

Barbed Tubing Connection, Inner Diameter: 1/8in, Port Size: 1/8in NPT, Material: Polypropylene, Wrap NPT threads 3 to 4 times with PTFE tape and wrench tighten for leak-resistant connection

Barbed Tubing Connection, Inner Diameter: 5/32in, Port Size: 1/4in NPT, Material: Polypropylene, Wrap NPT threads 3 to 4 times with PTFE tape and wrench tighten for leak-resistant connection

Tubing Cnxn Port 1/4In Npt Orange 2.5Mm. Tubing Connection, Outer Diameter: 2.5mm, Port Size: 1/4in NPT, Color: orange, Material: Polypropylene fitting, Natural Tefzel ferrule, Polypropylene adapter

Tubing Cnxn Port 1/4In Npt Black 2.2Mm. Tubing Connection, Outer Diameter: 2.2mm, Port Size: 1/4in NPT, Color: black, Material: Polypropylene fitting, natural Tefzel ferrule, Polypropylene adapter

Tubing Cnxn Port 1/4In Npt Green 1/16In. Tubing Connection, Outer Diameter: 1/16in, Port Size: 1/4in NPT, Color: green, Material: Polypropylene fitting, Blue Tefzel ferrule, Polypropylene adapter

Tubing Connection Port 1/4In Npt Nat 4Mm. Tubing Connection, Outer Diameter: 4.0mm, Port Size: 1/4in NPT, Color: natural, Material: PEEK fitting, natural Kel-F ferrule, Polypropylene body

Stuart Glass capillary tubes, open one end, pack of 100.

Stuart Glass capillary tubes, open both ends, pack of 100.

Pressure Tube 100mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 100mL, number 15 top, number 7 sample port, Body Dimension: 38.1mm OD, 17.8cm long, complete with back-seal plugs

Pressure Tube 35mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 35mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 17.8cm long, complete with back-seal plugs

Pressure Tube 18mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 18mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 17.8cm long, complete with back-seal plugs

Pressure Tube 8mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 8mL, number 7 top, number 7 sample port, Body Dimension: 13mm OD, 17.8cm long, complete with back-seal plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 10.2cm long, complete with back-seal plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 15 top, number 7 sample port, Body Dimension: 38.1mm OD, 10.2cm long, complete with back-seal plugs

Pressure Tube 15mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 15mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 10.2cm long, complete with back-seal plugs

Pressure Tube 9mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 9mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 10.2cm long, complete with back-seal plugs

Pressure Tube 4mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 4mL, number 7 top, number 7 sample port, Body Dimension: 13mm OD, 10.2cm long, complete with back-seal plugs

Pressure Tube 210mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 210mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 30.5cm long, complete with front-seal plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 30.5cm long, complete with front-seal plugs

Pressure Tube 200mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 200mL, number 36 top, number 7 sample port, Body Dimension: 50mm OD, 20.3cm long, complete with front-seal plugs

Pressure Tube 140mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 140mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 20.3cm long, complete with front-seal plugs

Pressure Tube 120mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 120mL, number 15 top, number 7 sample port, Body Dimension: 38.1mm OD, 20.3cm long, complete with front-seal plugs

Pressure Tube 38mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 38mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 20.3cm long, complete with front-seal plugs

Pressure Tube 21mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 21mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 20.3cm long, complete with front-seal plugs

Pressure Tube 9mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 9mL, number 7 top, number 7 sample port, Body Dimension: 13mm OD, 20.3cm long, complete with front-seal plugs

Pressure Tube 120mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 120mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 17.8cm long, complete with front-seal plugs

Pressure Tube 100mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 100mL, number 15 top, number 7 sample port, Body Dimension: 38.1mm OD, 17.8cm long, complete with front-seal plugs

Pressure Tube 35mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 35mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 17.8cm long, complete with front-seal plugs

Pressure Tube 18mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 18mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 17.8cm long, complete with front-seal plugs

Pressure Tube 8mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 8mL, number 7 top, number 7 sample port, Body Dimension: 13mm OD, 17.8cm long, complete with front-seal plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 10.2cm long, complete with front-seal plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 15 top, number 7 sample port, Body Dimension: 38.1mm OD, 10.2cm long, complete with front-seal plugs

Pressure Tube 15mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 15mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 10.2cm long, complete with front-seal plugs

Pressure Tube 9mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 9mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 10.2cm long, complete with front-seal plugs

Pressure Tube 4mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 4mL, number 7 top, number 7 sample port, Body Dimension: 13mm OD, 10.2cm long, complete with front-seal plugs

Pressure Tube 210mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 210mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 30.5cm long, without plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 30.5cm long, without plugs

Pressure Tube 200mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 200mL, number 36 top, number 7 sample port, Body Dimension: 50mm OD, 20.3cm long, without plugs

Pressure Tube 140mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 140mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 20.3cm long, without plugs

Pressure Tube 38mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 38mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 20.3cm long, without plugs

Pressure Tube 21mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 21mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 20.3cm long, without plugs

Pressure Tube 9mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 9mL, number 7 top, number 7 sample port, Body Dimension: 13mm OD, 20.3cm long, without plugs

Pressure Tube 120mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 120mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 17.8cm long, without plugs

Pressure Tube 100mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 100mL, number 15 top, number 7 sample port, Body Dimension: 38.1mm OD, 17.8cm long, without plugs

Pressure Tube 35mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 35mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 17.8cm long, without plugs

Pressure Tube 18mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 18mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 17.8cm long, without plugs

Pressure Tube 8mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 8mL, number 7 top, number 7 sample port, Body Dimension: 13mm OD, 17.8cm long, without plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 10.2cm long, without plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 15 top, number 7 sample port, Body Dimension: 38.1mm OD, 10.2cm long, without plugs

Pressure Tube 15mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 15mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 10.2cm long, without plugs

Pressure Tube 9mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 9mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 10.2cm long, without plugs

Pressure Tube 210mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 210mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 30.5cm long, complete with back-seal plugs

Pressure Tube 60mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 60mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 30.5cm long, complete with back-seal plugs

Pressure Tube 200mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 200mL, number 36 top, number 7 sample port, Body Dimension: 50mm OD, 20.3cm long, complete with back-seal plugs

Pressure Tube 140mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 140mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 20.3cm long, complete with back-seal plugs

Pressure Tube 120mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 120mL, number 15 top, number 7 sample port, Body Dimension: 38.1mm OD, 20.3cm long, complete with back-seal plugs

Pressure Tube 38mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 38mL, number 15 top, number 7 sample port, Body Dimension: 25.4mm OD, 20.3cm long, complete with back-seal plugs

Pressure Tube 21mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 21mL, number 7 top, number 7 sample port, Body Dimension: 19mm OD, 20.3cm long, complete with back-seal plugs

Pressure Tube 9mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 9mL, number 7 top, number 7 sample port, Body Dimension: 13mm OD, 20.3cm long, complete with back-seal plugs

Pressure Tube 120mL. Pressure Tube, with sampling port, 150psig at 120 deg C, Capacity: 120mL, number 25 top, number 7 sample port, Body Dimension: 38.1mm OD, 17.8cm long, complete with back-seal plugs

MICROCAP 3.0UL 90MM PK100 - 1-000-0030-90

KIMBLE® Westergren Sedimentation Tube, DWK Life Sciences - 67G70720-035, Westergren sedimentation tube, blue

Tubes Color Comparison Low Form Nessler (Unmatched). Grad. at (mL); 100. Approx. O.D. and Height (mm); 32 x 200. Scale Length (mm); 145-158 With the Shadowless Bottom feature. Rings and legend are durable white ceramic enamel. Rings coincide with specific volumes of liquid.

Polypropylene Capillary Bores for VWR Microdispensers. Replacement bores for the 53506-223 and 53506-733 VWR microdispensers. Volume: 1000uL. Polypropylene. Pack of 100.

Glass Capillary Bores for VWR Microdispensers. Replacement bores for the 53506-711 VWR microdispenser. Volume: 250uL. Color: Black. Pack of 100.

VWR Replacement Glass Capillary Bores for VWR Microdispensers, Volume: 100/200uL. Color: Blue.

VWR Replacement Glass Capillary Bores for VWR Microdispensers, Volume: 50uL. Color: Green.

VWR Replacement Glass Capillary Bores for VWR Microdispensers, Volume: 25uL. Color: 2 White.

Glass Capillary Bores for VWR Microdispensers. Replacement bores for the 53506-530 VWR microdispenser. Volume: 20uL. Color: Black. Pack of 100.

Glass Capillary Bores for VWR Microdispensers. Replacement bores for the 53506-100 and 53506-450 VWR microdispensers. Volume: 10uL. Color: Orange. Pack of 100.

Glass Capillary Bores for VWR Microdispensers. Replacement bores for the 53506-416 VWR microdispenser. Volume: 5uL. Color: White. Pack of 100.

Polycarbonate Bores. An accessory for Drummond microdispensers.

Wiretol II Capillary Microdispenser. Sizes: 50uL and 100uL. Color code: green. Dual graduations for noncontact delivery. With both standard length and short length plungers.

Wiretol II Capillary Microdispenser. Sizes: 25uL and 50uL. Color code: double white. Dual graduations for noncontact delivery. With both standard length and short length plungers.

Wiretol II Capillary Microdispenser. Sizes: 10uL and 20uL. Color code: orange. Dual graduations for noncontact delivery. With both standard length and short length plungers.

Wiretol II Capillary Microdispenser. Sizes: 5uL and 5uL. Color code: white. Dual graduations for noncontact delivery. With both standard length and short length plungers.

Wiretol II Capillary Microdispenser. Sizes: 1 to 5uL. Color code: white. Dual graduations for noncontact delivery. With both standard length and short length plungers.

Accessories for Fixed Volume Positive Displacement Microdispensers, Drummond - 3-000-388-G, 100 Replacement bores for 100/200µL microdispenser, White color code

Replacement 20uL Bore. Black color code. For Fixed Volume Microdispenser (53507-386).

Replacement 100uL Bores for Microdispensers. Blue color code. For Dialamatic Microdispenser (VWR# 53506-278) and Positive Displacement Digital Microdispenser (positive displacement digital microdispenser (VWR# 53507-012).

Replacement 50uL Bores for Microdispensers. Green color code. For Dialamatic Microdispenser (VWR# 53507-378) and Positive Displacement Digital Microdispenser (positive displacement digital microdispenser (VWR# 53507-010).

Replacement 25uL Bore. Double white color code. For Dialamatic Microdispenser (53506-274).

Replacement 10uL Bores for Microdispensers. Orange color code. For Dialamatic Microdispenser (VWR# 53506-270) and Positive Displacement Digital Microdispenser (positive displacement digital microdispenser (VWR# 53507-006).

Replacement O-Ring Kit. For use with Gel Sequencing Pipettor and Nanoliter Injector. Includes 1 Collet, 1 Small O-Ring, 1 Spacer, 1 Sealing O-Ring, and 1 Allen wrench.

Accessories for Gel Sequencing Pipettor, Variable Volume, Drummond - 3-00-000-203, Replacement Wire Plunger

Calibrated Micropipets, Drummond Scientific - 2-000-201, 100/200 µl, Disposable Micropipets

Calibrated Micropipet. Size: 200uL. Color: red. With one 38.1cm aspirator tube in easy-to-store cylinder. Fire polished. Guaranteed accuracy of -0.5%. Anticoagulant treatment for clinical applications.

Calibrated Micropipet. Size: 100uL. Color: blue. With one 38.1cm aspirator tube in easy-to-store cylinder. Fire polished. Guaranteed accuracy of 0.5perCent. Without anticoagulant treatment for clinical applications.

Calibrated Micropipets, Drummond Scientific - 2-000-075, 75 µl, Disposable Micropipets

Calibrated Micropipet. Size: 50uL. Color: green. With one 38.1cm aspirator tube in easy-to-store cylinder. Fire polished. Guaranteed accuracy of -0.5%. Anticoagulant treatment for clinical applications.

Calibrated Micropipets, Drummond Scientific - 2-000-044, 44.7 µl, Disposable Micropipets

Calibrated Micropipet. Size: 40uL. Color: yellow. With one 38.1cm aspirator tube in easy-to-store cylinder. Fire polished. Guaranteed accuracy of -0.5%. Anticoagulant treatment for clinical applications.

Calibrated Micropipets, Drummond Scientific - 2-000-030, 30 µl, Disposable Micropipets

Calibrated Micropipets, Drummond Scientific - 2-000-025, 25 µl, Disposable Micropipets

Calibrated Micropipet. Size: 20uL. Color: black. With one 38.1cm aspirator tube in easy-to-store cylinder. Fire polished. Guaranteed accuracy of -0.5%. Anticoagulant treatment for clinical applications.

Calibrated Micropipets, Drummond Scientific - 2-000-010, 10 µl, Disposable Micropipets

Calibrated Micropipet. Size: 5uL. Color: white. With one 38.1cm aspirator tube in easy-to-store cylinder. Fire polished. Guaranteed accuracy of -0.5%. Anticoagulant treatment for clinical applications.

MICROCAP 100.0UL 100MM PK100 - 1001000100

Silicone Tip for Microcaps Disposable Micropipets. Replacement silicone tip. For 53440-001, -023, -045, -067, -089, -103, -125, -147, -169, -180, -205, -216, -227, -249, -260.

Capillary Microcap. Capacity: 200uL. Length: 127mm. Accuracy: -1%. Fast, accurate way to transfer liquids in micro quantities. Precision-bore glass capillary tubes cut to predetermined lengths so that fill volumes are constant and precise. Disposable.

Microcaps® Disposable Micropipets, Drummond - 1000040080, 40 µl, Special Size Microcaps

Microcaps® Disposable Micropipets, Drummond - 1-000-0350, 35 µl, Standard Size Microcaps

Microcaps® Disposable Micropipets, Drummond - 1000020032, 20 µl, Special Size Microcaps

MICROCAP 10UL 55MM PK100 - 1000010055

Microcaps® Disposable Micropipets, Drummond - 1-000-0070, 7 µl, Standard Size Microcaps

Capillary Microcap. Capacity: 6.66uL. Length: 72mm. Accuracy: -1%. Fast, accurate way to transfer liquids in micro quantities. Precision-bore glass capillary tubes cut to predetermined lengths so that fill volumes are constant and precise. Disposable.

Microcaps® Disposable Micropipets, Drummond - 1000005055, 5 µl, Special Size Microcaps

Microcaps® Disposable Micropipets, Drummond - 1-000-0033, 3.33 µl, Standard Size Microcaps

MICROCAP 2.0UL 64MM PK100 - 1000002064

Microcaps® Disposable Micropipets, Drummond - 1000001055, 1.0 µl, Special Size Microcaps

Microcaps® Disposable Micropipets, Drummond - 1-000-0002, 0.2 µl, Standard Size Microcap

Replacement 1000uL Bore. Plastic tip. For Positive Displacement Digital Microdispenser (53507-014). Plunger wire and O-ring not required.

Replacement Parts Kits for VWR Microdispensers. Kit includes 1 plunger, 2 O-rings, 1 collet, 3 fluoropolymer resin tips, and 1 coil spring and barrel tube for the 250uL VWR microdispenser (53506-711).

Replacement Parts Kits for VWR Microdispensers. Kit includes 1 plunger, 2 O-rings, 1 collet, 3 fluoropolymer resin tips, and 1 coil spring and barrel tube for the 100/200uL VWR microdispenser (53506-697).

Replacement Parts Kits for VWR Microdispensers. Kit includes 1 plunger, 2 O-rings, 1 collet, 3 fluoropolymer resin tips, and 1 coil spring and barrel tube for the 100uL VWR microdispenser (53506-675).

Replacement Parts Kits for VWR Microdispensers. Kit includes 1 plunger, 2 O-rings, 1 collet, 3 fluoropolymer resin tips, and 1 coil spring and barrel tube for the 50uL VWR microdispenser (53506-653).

Replacement Parts Kits for VWR Microdispensers. Kit includes 1 plunger, 2 O-rings, 1 collet, 3 fluoropolymer resin tips, and 1 coil spring and barrel tube for the 20 uL VWR microdispenser 53506-530 and the 25 uL VWR microdispenser 53506-551.

Replacement Parts Kits for VWR Microdispensers. Kit includes 2 plungers, 2 O-rings, 1 collet, and 1 coil spring and barrel tube for the 20uL VWR microdispenser (53506-518).

Replacement Parts Kits for VWR Microdispensers. Kit includes 2 plungers, 2 O-rings, 1 collet, and 1 coil spring and barrel tube for the 10uL VWR microdispenser (53506-450).

Replacement Parts Kits for VWR Microdispensers. Kit includes 1 plunger, 2 O-rings, 1 collet, 3 fluoropolymer resin tips, and 1 coil spring and spring guide for the 100uL VWR microdispenser (53506-201).

Replacement Parts Kits for VWR Microdispensers. Kit includes 2 plungers, 2 O-rings, 1 collet, and 1 coil spring and barrel tube for the 5uL VWR microdispenser (53506-416).

Capillary Tubes for VWR 841 Micropipettors, Variable Volume. Capillary tubes are made from borosilicate glass. Volume: 100-200uL. Color: Red. For 53499-944.

Capillary Tubes for VWR 841 Micropipettors, Variable Volume. Capillary tubes are made from borosilicate glass. Volume: 60-100uL. Color: Blue. For 53499-864.

Capillary Tubes for VWR 841 Micropipettors, Variable Volume. Capillary tubes are made from borosilicate glass. Volume: 10-50uL. Color: Green. For 53499-853.

Capillary Tubes for VWR 841 Micropipettors, Variable Volume. Capillary tubes are made from borosilicate glass. Volume: 5-25uL. Color: 2 White. For 53499-842.

Capillary Tubes for VWR 841 Micropipettors, Variable Volume. Capillary tubes are made from borosilicate glass. Volume: 1-5uL. Color: White. For 53499-831.

Fluoropolymer resin-Coated Tips for VWR Microdispensers. Replacement tips for the 1000uL VWR microdispensers (53506-223 and 53506-733).

Wiretol II Capillary Microdispenser. Sizes: 100uL and 200uL. Color code: blue. Dual graduations for noncontact delivery. With both standard length and short length plungers.

Disposable PCR Micropipets. 10ul. Calculated in 1ul divisions. Positive displacement micropipets. Stainless steel plungers. Eliminate contamination from residual aerosols. Decontaminate at temperatures of 204[degree]C or higher. PCR is a patented process of Hoffman-La Roche. License required.

Disposable PCR Micropipets. 5ul. Calculated in 1ul divisions. Positive displacement micropipets. Stainless steel plungers. Eliminate contamination from residual aerosols. Decontaminate at temperatures of 204[degree]C or higher. PCR is a patented process of Hoffman-La Roche. License required.

Microcaps Disposable Micropipets. Capacity: 75ul. Length: 101mm. Suitable for general and hazardous micro-chemical applications. Micropipets consist of a bulb assembly and precision-bore capillary glass tubing. Dispenses with accuracy of +-1%. Micropipets and bulb assembly are sold separately.

Microcaps Disposable Micropipets. Capacity: 44.7ul. Length: 52mm. Suitable for general and hazardous micro-chemical applications. Micropipets consist of a bulb assembly and precision-bore capillary glass tubing. Dispenses with accuracy of +-1%. Micropipets and bulb assembly are sold separately.

Microcaps Disposable Micropipets. Capacity: 40ul. Length: 46mm. Suitable for general and hazardous micro-chemical applications. Micropipets consist of a bulb assembly and precision-bore capillary glass tubing. Dispenses with accuracy of +-1%. Micropipets and bulb assembly are sold separately.

Accessories for Nanoject IIâ„¢ Microinjectors, Drummond Scientific - 3 000 203G/X, Nanoject II Replacement Glass Capillaries

Microcaps Disposable Micropipets. Capacity: 30ul. Length: 78mm. Suitable for general and hazardous micro-chemical applications. Micropipets consist of a bulb assembly and precision-bore capillary glass tubing. Dispenses with accuracy of +-1%. Micropipets and bulb assembly are sold separately.

Microcaps Disposable Micropipets. Capacity: 25ul. Length: 65mm. Suitable for general and hazardous micro-chemical applications. Micropipets consist of a bulb assembly and precision-bore capillary glass tubing. Dispenses with accuracy of +-1%. Micropipets and bulb assembly are sold separately.

Microcaps® Disposable Micropipets, Drummond - 1-000-0090, 9 µl, Standard Size Microcaps

Microcaps Disposable Micropipets. Capacity: 15ul. Length: 54mm. Suitable for general and hazardous micro-chemical applications. Micropipets consist of a bulb assembly and precision-bore capillary glass tubing. Dispenses with accuracy of +-1%. Micropipets and bulb assembly are sold separately.

Microcaps® Disposable Micropipets, Drummond - 1-000-0080, 8 µl, Standard Size Microcaps

Microcaps® Disposable Micropipets, Drummond - 1-000-0060, 6 µl, Standard Size Microcaps

MICROCAPS 5 LAMBDA CS1000 - 1-000-0050/CA

Microcaps Disposable Micropipets. Capacity: 4ul. Length: 32mm. Suitable for general and hazardous micro-chemical applications. Micropipets consist of a bulb assembly and precision-bore capillary glass tubing. Dispenses with accuracy of +-1%. Micropipets and bulb assembly are sold separately.

Microcaps® Disposable Micropipets, Drummond - 1000003055, 3 µl, Special Size Microcaps

Microcaps Disposable Micropipets. Capacity: 3ul. Length: 32mm. Suitable for general and hazardous micro-chemical applications. Micropipets consist of a bulb assembly and precision-bore capillary glass tubing. Dispenses with accuracy of +-1%. Micropipets and bulb assembly are sold separately.

Microcaps® Disposable Micropipets, Drummond - 1000002055, 2 µl, Special Size Microcaps

Microcaps® Disposable Micropipets, Drummond - 1-000-0010-64, 1 µl, Special Size Microcaps

Capillary Microcap. Capacity: 0.5uL. Length: 32mm. Accuracy: -1%. Fast, accurate way to transfer liquids in micro quantities. Precision-bore glass capillary tubes cut to predetermined lengths so that fill volumes are constant and precise. Disposable.

Capillary Microcap. Capacity: 0.25uL. Length: 32mm. Accuracy: -1%. Fast, accurate way to transfer liquids in micro quantities. Precision-bore glass capillary tubes cut to predetermined lengths so that fill volumes are constant and precise. Disposable.

VWR Disposable Micropipets. Capacity: 100uL. Color Code: Blue. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

VWR Disposable Micropipets. Capacity: 75uL. Color Code: Purple. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

MICROCAP 10.0UL 64MM 100/PK - 1000010064

VWR Disposable Micropipets. Capacity: 50uL. Color Code: Green. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

VWR Disposable Micropipets. Capacity: 25uL. Color Code: 2 White. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

VWR Disposable Micropipets. Capacity: 20uL. Color Code: Black. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

VWR Disposable Micropipets. Capacity: 10uL. Color Code: Orange. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

VWR Disposable Micropipets. Capacity: 5uL. Color Code: White. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

Calibrated Disposable Micropipets. Capacity: 1 to 5ul. Ideal for a variety of liquid transfer work. Anticoagulant-treated for clinical applications. Fire polished. +-0.5% accuracy. Supplied in a conveniently designed cylinder. Has one 38.1cm rubber aspirator tube.

Bores, Replacement, Capacity: 100/200uL, Glass; For micropipetters/dispensers, green, Pk100.

Bores, Replacement, Capacity: 50uL, Material: Glass; For micropipetters/dispensers, green, Pk100.

Bores, Replacement, Capacity: 25uL, Material: Glass; For dispensers, white, Pk100.

Bore, Replacement, For micropipetters, dispensers, Capacity: 10ul, Pk100.

Bore, Replacement, For all microdispensers; Glass; Color code: White; Capacity: 1 to 5ul, Pk100.

Microcap, 0.5ul, 64mm, O.D 0.0210inchxI.D 0.0039inch.

Microcaps® Disposable Micropipets, Drummond - 1-000-2000-E, 200 µl, Standard Size Microcaps, with EDTA

KIMAX Capillary Melting Point Tubes. Length: 90mm (USP). Inner diameter: approximately 0.8 to 1.1mm with a 0.25mm wall thickness. Tubes have one sealed end and one open end.

KIMAX Capillary Melting Point Tubes. Length: 100mm (USP). Inner diameter: approximately 0.8 to 1.1mm with a 0.25mm wall thickness. Both ends of tube are open. Comply with United States Pharmacopoeia requirements.

KIMAX Capillary Melting Point Tubes. Length: 100mm. Outer diameter: approximately 1.5 to 1.8mm with a 0.2mm wall thickness. Both ends of tube are open.

Chemistry, Micro, Capillary Gas Delivery Tube, 14/10. PYREX brand, Deluxe Version, [standard taper] 14/10. Threaded Components.

Bore for Gel Sequencing Pipettor, Variable Volume. Bore, 0.35mm.

VWR Micro-Hematocrit Capillary Tubes. Clear band tube with Heparin is calibrated 6cm from tip. Overall length: 7.5cm. ID: 0.5-0.6mm. Precision bore tubes are fire-polished.

VWR Disposable Micropipets. Capacity: 44.7uL. Color Code: Purple and Green. Treated with the anticoaguLant, heparin, for clinical applications. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

VWR Disposable Micropipets. Capacity: 44.7uL. Color Code: Purple and Blue. Calibrated to contain with permanent fill lines. Packed in easy dispensing canisters. Has one 38.1cm aspirator tube. Made of borosilicate glass.

Caraway Capillary Tubes. Plain, blue color code. Tapered tips facilitate micro-blood sample collection. Volume of full tube is 350uL. Tubes may be sealed with Critocap tube closure (15407-023). Length: 7.5cm. O.D.: 0.4cm. I.D.: 0.3cm.

Micro-Hematocrit Capillary Tubes. Volume: 70uL. Manufactured from soda lime glass, packed in plastic vials with reclosable snap-lock caps to maintain cleanliness. Ends may be sealed by flame, sealing clay, or patented caps. Plain, blue color code. I.D.: 1.1x75mm.

Capillary Tube, Microhematocrit, 100% PLASTIC, Red Tip, Sodium Heparinized, 100/Vial, 10 Vials/Unit.

Capillary Tube, Microhematocrit, Soda Lime Glass, Blue Tip, Plain, 100/Vial, 10 Vials/Unit.

Capillary Tube, Microhematocrit, Soda Lime Glass, Green Tip, Ammonium Heparinized, 100/Vial.

Capillary Tube, Microhematocrit, Soda Lime Glass, Red Tip, Sodium Heparinized, 100/Vial.

Pipets 5 In, micro capillary.

EP Scientific Low-Carbon Total Organic Carbon Vials, Tubes and Bottles, Thermo Scientific - 3115-OTWS-2, 30 ml (1.01 oz.), Polysulphone Tube

Category