• 0
Shop Products $

VACUUM SEAL SET VS22 CPL - 11075810

VALVE F/CHROM INJECTION 1/4 UNF-28 - 044867

CONTROLLER VACUUM VC100

CONDENSER DRY ICE

PUMP VACUUM CHEMICAL RESISTANT C410

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Coated receiving flask, 1000 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Coated evaporating flask, 1000 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Vacuum regulator /moisture trap

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Evaporation flask clip

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Full fluorine ether rubber ring

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Rubber ring

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Distillation spider, 50 ml without flask

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Vapor tube

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Foam brake, 250 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Connector, NS 24/40, NS 14/20

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Connector, NS 24/40, NS 19/22

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Connector NS 24/40, NS 29/42

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Receiving flask, 2000 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Receiving flask, 1000 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Receiving flask, 500 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Receiving flask, 250 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Receiving flask, 100 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Evaporating flask, 2000 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Evaporating flask, 1000 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Evaporating flask, 500 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Evaporating flask, 250 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Evaporating flask, 100 ml

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Evaporating flask, 50 ml

LED Digital Rotary Evaporators, LED rotary evaporator with manual lift (76533-234) with glassware set V12 vertical (76533-244), cooling surface 1200 cm² and heating bath (76533-236)

LED Digital Rotary Evaporators, LED rotary evaporator with manual lift (76533-234) with glassware set D17 diagonal (76533-242), cooling surface 1700 cm² and heating bath (76533-236)

LED Digital Rotary Evaporators, LED rotary evaporator with manual lift (76533-234) with glassware set V17C (76533-240), vertical coated anti-explosion, cooling surface 1700 cm² and heating bath (76533-236)

LCD Digital Rotary Evaporators, LCD rotary evaporator with automatic lift (76533-232) with glassware set V12 vertical (76533-244), cooling surface 1200 cm² and heating bath (76533-246)

LCD Digital Rotary Evaporators, LCD rotary evaporator with automatic lift (76533-232)) with glassware set D17 diagonal (76533-242), cooling surface 1700 cm² and heating bath (76533-246)

LCD Digital Rotary Evaporators, LCD rotary evaporator with automatic lift (76533-232) with glassware set V17C (76533-240), vertical coated anti-explosion, cooling surface 1700 cm² and heating bath (76533-246)

LCD Digital Rotary Evaporators, LCD rotary evaporator with automatic lift (76533-232) with glassware set V17 vertical (76533-238), cooling surface 1700 cm² and heating bath (76533-246)

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Heating bath for LCD rotary evaporator, LED display, room temperature to 180 °C

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Glassware set D17, diagonal, cooling surface 1700 cm² includes evaporating flask (NS 24/40) and receiving flask (KS 35/20)

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Glassware set V12, vertical, cooling surface 1200 cm² includes evaporating flask (NS 24/40) and receiving flask (KS 35/20)

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Glassware set V17C, vertical coated anti-explosion, cooling surface 1700 cm² includes evaporating flask (NS 24/40) and receiving flask (KS 35/20)

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Glassware set V17, vertical, cooling surface 1700 cm² includes evaporating flask (NS 24/40) and receiving flask (KS 35/20)

Glasswares and Heating Baths for VWR® Digital Rotary Evaporators, Heating bath for LED rotary evaporator, room temperature to 180 °C

USB TO MALE 8 PIN MINI DIN CABLE 6FT - 27340

Accessories for Vortex Mixers, TX4, ZX3, RX3, ZX4, CLASSIC and WIZARD, VELP Scientifica - A00000019, Foam stand for 4 tubes, Ø 29 mm

Accessories for Vortex Mixers, TX4, ZX3, RX3, ZX4, CLASSIC and WIZARD, VELP Scientifica - A00000013, Customizable soft foam top

Accessories for Vortex Mixers, TX4, ZX3, RX3, ZX4, CLASSIC and WIZARD, VELP Scientifica - A00000012, Foam stand for 19 microvials eppendorf, 1.5 ml

Multivapor P-12 complete, Evaporate up to 12 samples simultaneously by efficient vacuum vortex technology, Setup: Rack, adapters, tubes. Condenser: S-type, V-stand, P+G Receiving Vessel: 2L, P+G Safety Shield: Included Vacuum Pump, Without Interface

Multivapor P-12 complete, Evaporate up to 12 samples simultaneously by efficient vacuum vortex technology, Setup: Rack, adapters, tubes; Condenser: Cold trap, V-stand, P+G, Receiving Vessel: 2L, P+G Safety Shield: Includes V-300 Vacuum Pump w/ sec. Cond, I-300Pro Interface

FlashPure EcoFlex Silica catridge 220g. FlashPure EcoFlex Silica catridge, Particle shape: Irregular, Particle size: 40-63um, Pore size: 55-75A, Surface area: 470-530m2/g, Max.Pressure: 150psi /10bar, Default flowrate: 120 mL/min, Loading capacity: 220mg-22g, Column volume: 280 mL, weight: 220g

FlashPure EcoFlex Silica catridge 40g. FlashPure EcoFlex Silica catridge, Particle shape: Irregular, Particle size: 40-63um, Pore size: 55-75A, Surface area: 470-530m2/g, Max.Pressure: 300psi / 20bar, Default flowrate: 40 mL/min, Loading capacity: 40mg-4.0g, Column volume: 50 mL, weight: 40g

FlashPure EcoFlex Silica catridge 25g. FlashPure EcoFlex Silica catridge, Particle shape: Irregular, Particle size: 40-63um, Pore size: 55-75A, Surface area: 470-530m2/g, Max.Pressure: 300psi / 20bar, Default flowrate: 32 mL/min, Loading capacity: 25mg-2.5g, Column volume: 32 mL, weight: 25g

FlashPure EcoFlex Silica catridge12g. FlashPure EcoFlex Silica catridge, Particle shape: Irregular, Particle size: 40-63um, Pore size: 55-75A, Surface area: 470-530m2/g, Max.Pressure: 300psi / 20bar, Default flowrate: 30 mL/min, Loading capacity: 12mg-1.2g, Column volume: 20 mL, weight: 12g

NitroVap 2LV Nitrogen Generator 35.8 x 27.0 x 41.9 cm. NitroVap 2LV Nitrogen Generator, RapidVap N2/48 Evaporation Systems, for RapidVap Vertex Dry Evaporators, Weight: 54.0 lbs, Dimensions metric: 35.8 x 27.0 x 41.9 cm, With no electrical requirements, minimum flow rate of 335 liters per minute

Cold Trap 4L. Cold Trap, Method: Direct trap or Glass trap, Dehumidifying capacity: Max. 0.9 kg, Max. Low temperature Fall time: -45 deg C, Bath dimension: Cylindrical, 153 x 235 mm, External dimensions: 345x475x726mm, Power source 50/60Hz: AC 100V 5A(15A), Applications: Evaporator, Capacity: 4L

Aluminum Block 17x120mm. Aluminum Block, Accomodates 15 ml Conical Tube, For RapidVap Vertex Dry Evaporators, Angled in the Vertex, the sample capacity is 12 ml, Handle: Stainless steel, Port diameter: 0.5cm, It is for insertion of the temperature probe to monitor temperature, Dimension: 17x120mm

Base/Cart. For use with the Laborota 20 series rotary evaporators. Consists of a base cabinet for glassware, solvents, or accessories, mounted on a fully maneuverable caster platform.

Vapor Temperature Sensor. For use with the Laborota 20 series evaporators. Determines the vapor temperature of evaporating gases.

Evaporating Flask, 20 L. For use with the Laborota 20 series rotary evaporators. Round bottom flask used to hold samples to be distilled.

Powder Flask, 10 L. For use with the Laborota 20 series rotary evaporators. Round bottom flask used to hold samples to be distilled.

LR 20 ACCESSORY CLAMP. Clamp S 40/41 for the LR 20 rotary evaporator.

LR 20 ACCESSORY SEAL. Seal 55/98 for the LR 20 rotary evaporator.

RECEIVING FLASK. Plastic coated receiving flask. 1,000mL.

RECEIVING FLASK. Plastic coated receiving flask. 2,000mL.

RECEIVING FLASK. Plastic coated receiving flask. 500mL.

RECEIVING FLASK. Plastic coated receiving flask. 100mL.

RECEIVING FLASK. Plastic coated receiving flask. 3,000mL.

RECEIVING FLASK. Plastic coated receiving flask. 250mL.

500mL Powder Flask. For use with the Laborota 4000, 4001, 4002, 4003 rotary evaporators.

2000mL Powder Flask. For use with the Laborota 4000, 4001, 4002, 4003 rotary evaporators.

1000mL Powder Flask. For use with the Laborota 4000, 4001, 4002, 4003 rotary evaporators.

Rotor. For use with the Eppendorf Vacufuge concentrator, basic unit, or complete system. Holds up to 8x16mL, 18x105mm, round-bottom tubes.

Outer Sleeve Only. For Chemglass model CG-1333-A-01.

Accessories for Heidolph® Hei-VAP Rotary Evaporators, Heidolph - 036303100, Vacuum Tubing and Water Tubing Set for Large Scale Evaporators

Vapor Tube Rv 10.70.

Accessories for Vacuum Drying Oven, Yamato - 297071, Shelf Plate for Models ADP200C/210C

Arm Jack. For Rotary Evaporator, RE-200 Series.

Buchi Rotary Evaporator Spare Parts, 3 L, PLASTIC+GLAS BJ 35/20 Receiving Flask

Buchi Rotary Evaporator Spare Parts, 2 L, PLASTIC+GLAS BJ 35/20 Receiving Flask

Evaporating Flask. Standard Taper Joint: 24/40. Volume: 500mL. For use with any evaporator.

Buchi Rotary Evaporator Spare Parts, 3 L, PLASTIC+GLAS [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 3 L, PLASTIC+GLAS [standard joint] 24/40 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 2 L, PLASTIC+GLAS [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 2 L, PLASTIC+GLAS [standard joint] 24/40 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 1 L, PLASTIC+GLAS BJ 35/20 Receiving Flask

Buchi Rotary Evaporator Spare Parts, 1 L, PLASTIC+GLAS [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 1 L, PLASTIC+GLAS [standard joint] 24/40 Evaporating Flask

Protecting Ring with O-Rings. Replacement accessory for use with Brinkmann rotary evaporator models EL130, EL131, EL141.

Buchi Rotary Evaporator Spare Parts, KD-26, rotating vacuum seal

Replacement Insert. Replacement glassware for Buchi SafetyVAP Rotary Evaporators, Models R-200/205.

Buchi Rotary Evaporator Spare Parts, 3 L, BJ 35/20 Receiving Flask

Buchi Rotary Evaporator Spare Parts, 3 L, pear shaped [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 3 L, pear shaped [standard joint] 24/40 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 2 L, pear shaped [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 2 L, pear shaped [standard joint] 24/40 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 1 L, pear shaped [standard joint] 29/42 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 1 L, pear shaped [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 1 L, pear shaped [standard joint] 24/40 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 500 mL pear shaped [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 500 mL pear shaped [standard joint] 24/40 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 250 mL pear shaped [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 250 mL pear shaped [standard joint] 24/40 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 100 mL pear shaped [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 100 mL pear shaped [standard joint] 24/40 Evaporating Flask

Buchi Rotary Evaporator Spare Parts, 50 mL pear shaped [standard joint] 29/40 Evaporating Flask. Buchi Rotary Evaporator Spare Parts, 50 mL pear shaped [standard joint] 24/40 Evaporating Flask

FIXING CUP - 000633

Trap, Rotary Evaporator. Size: 100mL; Upper Joint Size: [ST] 24/40 Outer; Lower Joint Size: [ST] 24/40 Inner. Reduces foam carry-over in rotary evaporators. Trap is used between vapor duct tube and evaporator flask.

Trap, Rotary Evaporator. Size: 250mL; Upper Joint Size: [ST] 24/40 Outer; Lower Joint Size: [ST] 24/40 Inner. Reduces foam carry-over in rotary evaporators. Trap is used between vapor duct tube and evaporator flask.

Foam Break with Flask Clamp, NS 24/40 for Hei-VAP Rotary Evaporators.

Foam Break with Flask Clamp, NS 29/32 for Hei-VAP Rotary Evaporators.

Evaporating Cylinder, 1500ml, NS 24/40 for Hei-VAP Rotary Evaporators.

Evaporating Cylinder, 500ml, NS 24/40 for Hei-VAP Rotary Evaporators.

Spider with 5 Flasks NS 24 100ml, NS 24/40, for Hei-VAP Rotary Evaporators.

Spider with 5 Flasks NS 24 50ml, NS 24/40, for Hei-VAP Rotary Evaporators.

Spider with 5 Flasks NS 24 100ml, NS 29/32, for Hei-VAP Rotary Evaporators.

Spider with 5 Flasks NS 24 50ml, NS 29/32, for Hei-VAP Rotary Evaporators.

Spider with 20 Distillation Sleeves NS 14.5 20ml with Adapater NS 24/40, for Hei-VAP Rotary Evaporators

Spider with 12 Distillation Sleeves NS 14.5 20ml with Adapater NS 24/40, for Hei-VAP Rotary Evaporators

Spider with 6 Distillation Sleeves NS 14.5 20ml, for Hei-VAP Rotary Evaporators.

Spider with 20 Distillation Sleeves NS 14.5 20ml with Adapater NS 29/32, for Hei-VAP Rotary Evaporators

Spider with 12 Distillation Sleeves NS 14.5 20ml with Adapater NS 29/32, for Hei-VAP Rotary Evaporators

Spider with 6 Distillation Sleeves, NA 14.5 20ml, NS 29/32, for Hei-VAP Rotary Evaporators.

Powder Flask, 2000ml, NS 24/40 for Hei-VAP Rotary Evaporators.

Powder Flask, 1000ml, NS 24/40 for Hei-VAP Rotary Evaporators.

Powder Flask, 500ml, NS 24/40 for Hei-VAP Rotary Evaporators.

Evaporating Flask, 5000ml, NS 24/40, NS 14.5 with adapter, for Hei-VAP Rotary Evaporators.

Evaporating Flask, 5000ml, NS 29/32, NS 14.5 with adapter, for Hei-VAP Rotary Evaporators.

Evaporating Flask, 3000ml, NS 29/32, NS 14.5 with adapter, for Hei-VAP Rotary Evaporators.

Evaporating Flask, 2000ml, NS 29/32, NS 14.5 with adapter, for Hei-VAP Rotary Evaporators.

Evaporating Flask, 1000ml, NS 29/32, NS 14.5 with adapter, for Hei-VAP Rotary Evaporators.

Evaporating Flask, 500ml, NS 29/32, NS 14.5 with adapter, for Hei-VAP Rotary Evaporators.

Evaporating Flask, 250ml, NS 29/32, NS 14.5 with adapter, for Hei-VAP Rotary Evaporators.

Evaporating Flask, 100ml, NS 29/32, NS 14.5 with adapter, for Hei-VAP Rotary Evaporators.

Evaporating Flask, 50ml with Adaptor for NS 14.5 to NS 29/32, for Hei-VAP Rotary Evaporators.

Hose Connector Y- Type, 8mm diameter (for splitting vacuum hose), for 1m length Vacuum tubing.

Vacuum Tubing, 1m length, Dimension: ID= 1/2inxOD= 3/4in.

Carbon Filter Cartridge for Model 9000 Benchtop Water Distiller.

Heating bath liquid up to 220 deg C, Size: 5L for Hei-VAP Rotary Evaporators.

AUTOaccurate-sensor, Only in combination with glassware set G3 and G6, For Hei-VAP Precision rotary evaporator

Vapor temperature sensor, For Hei-VAP Advantage and Hei-VAP Precision Rotary evaporator.

Guard shield, Strong and transparent for protection while changing flasks, Attached at the edge of the bath, For Hei-VAP Rotary Evaporator

Rotavac Vario Control RPM Rgulated Vacuum Pump. Three stage diaphragm pump, Even if the gas ballast valves is open and excellent ultimate vauum is reached when working with easily condensable vapors. For Hei-VAP Precision, Dimensions (without condenser): 167x 236x 196mm

Secondary glass condensate condenser for Hei-VAP Vario Pumping Units, RPM Regulated Vacuum Pumps.

Guard hood, Strong and transparent to protect from implosions, Provides easy and immediate access to flask and bath, For Hei-VAP Rotary Evaporator

Vacuum Pump V-300, Chemically resistant PTFE diaphragm pump, Suction capacity: 1.8 m3/h, Final vacuum: 5 mbar, Condensation assembly: Secondary condenser, Interface: I-300 Pro, Woulff bottle, Frequency: 50/60 Hz, Dimension: 200x321x291mm, Voltage: 100Volt

Interface. Touch Interface I-300 Pro controls all distillation parameters of a Rotavapor R-300 system, Modes: manual, timer, continuous, AutoDest, drying, methods, Charting, recording, mobile app available, Features: Interface: I-300 Pro Compatibility Pack: Valve unit

Interface. Touch Interface I-300 Pro controls all distillation parameters of a Rotavapor R-300 system, Modes: manual, timer, continuous, AutoDest, drying, methods, Charting, recording, mobile app available, Features: Interface: I-300 Pro Compatibility Pack: R-300, V-300

Interface. Touch Interface I-300 Pro controls all distillation parameters of a Rotavapor R-300 system, Modes: manual, timer, continuous, AutoDest, drying, methods, Charting, recording, mobile app available, Features: Interface: I-300 Pro Compatibility Pack: R-300/V-300

Interface. Touch Interface I-300 Pro controls all distillation parameters of a Rotavapor R-300 system, Modes: manual, timer, continuous, AutoDest, drying, methods, Charting, recording, mobile app available, Features: Interface: I-300 Pro Compatibility Pack: Standalone

Vacuum pump, Capacity: 1.8m3/h, Final Vacuum: 5m bar, Woulff Bottle: Woulff bottle.

Vacubox. V-300 I-300P Vacubox, Capacity: 1.8m3/h, Final Vacuum: 5mbar, Interface: I-300 Pro, Woulff bottle, Condensation Assembly: Secondary condenser

Vacuum pump and controller, V-300 I-300P Vacubox, Capacity: 1.8m3/h, Final Vacuum: 5mbar, Interface: I-300 Pro, Woulff Bottle

Findenser b29 cone, b24 socket, air condenser, for solvent volumes from 5ml up to 1 liter, 0deg c to 60deg c

Findenser b19 cone, b19 socket, air condenser, for solvent volumes from 5ml up to 1 liter, 0deg c to 60deg c

Findenser mini b24 cone, b24 socket, air condenser, for solvent volumes from 5ml up to 1 liter, 0deg c to 60deg c

Findenser mini b14cone, b14 socket, air condenser, for solvent volumes from 5ml up to 1 liter, 0deg c to 60deg c

Findenser mini b19 cone, b19 socket, air condenser, for solvent volumes from 5ml up to 1 liter, 0deg c to 60deg c

Rotary Evaporator. Industrial Rotary Evaporator Enclosure, External Dimension: 68inx34. 75inx96in, Internal Dimensions: 66inx32inx94in, 600 max. CFM at full opening (60 LFPM average), Linear face velocity: 2-Speed, Electrical: 110V, current; 2. 0hz

Rotary Evaporator Enclosure Total Exhaust Enclosure External Dimension: 38inx24inx50in, Internal Dimensions: 37inx21. 5inx38in, Airfl ow characteristics: 350 CFM, Linear face velocity: 2-Speed, Electrical: 110V, current; 2. 0h

Rotary Evaporator Enclosure Ducless Enclosure External Dimension: 38inx24inx48in, Internal Dimensions: 37inx21. 5inx38in, Airfl ow characteristics: 350 CFM, Linear face velocity: 2-Speed, Electrical: 110V, current; 2. 0hz

Laborota 20 Distimatic including automatic drainage of residue and adaptor piece for glassware set A

Tubing Set with Male MPC connector, Fits all Cell Factory Systems.

Tubing Set with Female MPC connector, Fits all Cell Factory Systems.

Category