• 0
Shop Products $

Extraction SPE Disk Glassware and Manifolds. Anodized Aluminum Clamp, 47 mm All SPE Manifolds are supplied with three-way valves that allow the venting to atmosphere of each station without affecting the vacuum in the rest of the system.

Filtration Microfiltration Assembly 90 mm with Stainless Steel Support Ultra-Ware. Support Type; Stainless. Grad. Funnel Capacity (mL); 1000. Filter Size (mm); 90. Approx.

ULTRA-WARE Funnel/Support Assembly, 47mm Stainless Steel Support. Mounts in Millipore filtering manifolds. Removable 316 stainless screen filter support. Aluminum clamp sandwiches filter between funnel and base. With 300mL funnel. Diameter: 76mm. Height: 229mm.

Funnel/Support Assembly, Ultra-Ware, 47mm PTFE Face Support. For use with Millipore filtering manifolds. With PTFE faced fritted-glass support base, 300mL graduated funnel, aluminum clamp, number 8 silicone stopper. Clamp sandwiches filter between funnel and base. Autoclave with filter in place.

Filter Flask. 1L flask is compatible with the ULTRA-WARE Funnel/Support Assembly, 47mm Stainless Steel Support (KT953805-0000). Also for use with Millipore filtering manifolds.

Filtration Microfiltration Assembly 90 mm with Fritted Glass Support Ultra-Ware. Support Type; Fritted Glass. Grad. Funnel Capacity (mL); 1000. Filter Size (mm); 90. Approx.

Funnel/Support Assembly, 47mm Glass Support. For use with Millipore filtering manifolds. With coarse fritted-glass support base, 300mL graduated funnel, aluminum clamp, number 8 silicone stopper. Clamp sandwiches filter between funnel and base. 35mm prefilter. 9.6cm2 filter area.

Filtration Microfiltration Assembly 25 mm with Stainless Steel Support Ultra-Ware. Support Type; Stainless. Graduated FunnelCapacity (mL); 15. Filter Size (mm); 25. Approx.

Flasks Filtration Flask. Flask, 125 mL, #5 Rubber Stopper Joint, #2 Hose Connection This flask is manufactured from heavy wall borosilicate glass to assure the mechanical strength needed for vacuum filtration. The side arm accepts standard 1/4 (6 mm) I.D. tubing for connection to vacuum sources.

Filtration Microfiltration Assembly 25 mm with Fritted Glass Support Ultra-Ware. Support Type; Fritted Glass. Graduated FunnelCapacity (mL); 15. Filter Size (mm); 25. Approx.

INFINITYLAB SOL FILTRATION HOLDER BASE - 5191-6778

CrossLab Solvent Filtration and Filter Membranes for HPLC, Agilent Technologies - 5191-6776, InfinityLab solvent filtration assembly

Rack, Tube, 16/17Mm, 25-Place, Stainless Steel Z Shape.

Flask Filter 40/35 1000Ml. Vwr Filter Flask Graduated To 1L Capacity With 40/35 Joint

Flask Filter Graduated 1L. Vwr

Filter Flask Graduated 125Ml. Vwr

Base Glass F/ Ss Support. Vwr

Filter Holder Ss Support. Vwr

Fritted Support Base. Vwr

Filter Holder W/Gls Supprt. VwrAll Glass Filter Holder Assembly With Funnel. Fritted Base, Cap, Clamp, 47Mm

Gasket Ptfe 47Mm. Vwr Ptfe Gasket For Use Under The Supplort Screen 47Mm

Support Screen Ss 47Mm. Vwr47Mm Diameter Steel Mesh Support Holder

Glass Base 47Mm F/Ss Sprt. Vwr 47Mm Diameter Steel Mesh Support Holder

Filter Holder W/Ss Support. Vwr Glass Filter Holder With Stainless Steel Screen 47Mm

Stopper Number8 Silicone W/Hole. Vwr Silicone Stopper Astm Size 8 With Hole

Aluminum Clamp 47Mm. Vwr Aluminum Clamp To Hold 47 Mm Filter And 300Ml Funnel

Suport Base 47Mm Frst Glass. Vwr Glass Base For 47Mm Glass/Filter Holder

Funnel Glass 300Ml Replcement. Vwr 300Ml Glass Funnel For Use With 47Mm Filter

Ptfe Gasket For Use Under The Supplort Screen 25Mm. Vwr

Ss Support Screen For Filter 25Mm. Vwr

Silicone Stopper Astm Size 5 With Hole. Vwr

Aluminum Clamp To Hold 25 Mm Filter And 15Ml Funnel. Vwr

Base Gls F/Stainless Support 25Mm. Vwr 25Mm Diameter Steel Mesh Support Holder

25Mm Glass Frit Based Filter Holder. Vwr

Glass Funnel 25Mm 15Ml. Vwr15Ml Graduated Funnel For Use On 25 Mm Filter Holders

Filter Holder W/Stainless Support. Vwr47Mm Diameter Steel Mesh Support Holder

Filter Holder W/Glass Supprt. Vwr47Mm Glass Frit Based Filter Holder

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XPH-20254

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XPH-20204

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XPH-16254

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XPH-16204

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-24242

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-20252

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-20202

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-16252

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-16202

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-16162

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-20251

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-20201

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-18181

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-16161

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-14241

FILTER AIR PLE MERV8 SELF-SUPRTED CS12 - XP-STD-10201

ROLL/PAD STREAMLINE SYN PE/FM 30X90FT - P100-R30

FILTER 14-3/4X29-3/4X1 MERV8 - MX40-143429341

Filter Disc, Packing Support, Ace Glass Incorporated - 5848-100, 80 mm for Adapter, Glass Filter Disc, Porosity A

Disposable Fluid Path Replacements. 10/Package for sentino microbiology pump. the polypropylene adapter is specifically designed for use with microfunnel filter funnels. the tubing is 2 feet long made of a thermoplastic elastomer. the adapter is polypropylene.

ZANDER Filter Element.

Capsule Sinker Spiral 316Ss. Spiral 316ss capsule sinker 1.32 x. 46 inch capacity

47MM NYLON RETAINING RING.

25MM NYLON RETAINING RING.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH #15 O-RING JOINTS.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH #15 O-RING JOINTS.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH #15 O-RING JOINTS.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

VACUUM MANIFOLD, 405MM LONG, (4) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH #15 O-RING JOINTS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH #15 O-RING JOINTS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH 14/20 INNER ENDS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH 14/20 INNER ENDS.

VACUUM MANIFOLD, 310MM LONG, (3) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

47MM MEMBRANE FILTRATION APPARATUS INCLUDES 1000ML FILTER FLASK WITH ACE-SAFE HOSE CONNECTION, 500ML GRADUATED FUNNEL, POROSITY B (70-100 micron) FRITTED DISC, NYLON ADAPTER AND RETAINING RING.

SpectroMembrane Thin-Film Sample Support Carrier Frames. Etnom-S thin-film sample support substance attached to a frame serves as a carrier to avoid direct handling of thin-film material. Automatically detaches from frame leaving a taut wrinkle-free sample support. Circle Dia: 76.2mm. Gauge: 3.0u.

8765 MANIFOLD, Vacuum, Firestone. 5 PORT PTFE HDL MANIFOLD.

8765 MANIFOLD, Vacuum, Firestone. 5 PORT UHDPE HDL MANIFOLD.

8765 MANIFOLD, Vacuum, Firestone. 4 PORT PTFE HDL MANIFOLD.

8765 MANIFOLD, Vacuum, Firestone. 4 PORT UHDPE HDL MANIFOLD.

8765 MANIFOLD, Vacuum, Firestone. 3 PORT PTFE HDL MANIFOLD.

8765 MANIFOLD, Vacuum, Firestone. 3 PORT UHDPE HDL MANIFOLD.

8763 Manifold, Vacuum, Dual. COMPLETE DUAL VACUUM GLASS MANIFOLD UNIT WITH FIVE 4MM STRAIGHT BORE PTFE STOPCOCKS. UNIT INCLUDES A #15 END PLUG AND TWO ACE-SAFE TUBING CONNECTORS FOR 1/4 AND 1/2 TUBING.

8763 Manifold, Vacuum, Dual. COMPLETE DUAL VACUUM GLASS MANIFOLD UNIT WITH THREE 4MM STRAIGHT BORE PTFE STOPCOCKS. UNIT INCLUDES A #15 END PLUG AND TWO ACE-SAFE TUBING CONNECTORS FOR 1/4 AND 1/2 TUBING.

8763 Manifold, Vacuum, Dual. GLASS MANIFOLD WITH FIVE 4MM STRAIGHT BORE STOPCOCKS. #15 ACE-THRED ON BOTH ENDS.

8763 Manifold, Vacuum, Dual. GLASS MANIFOLD WITH THREE 4MM STRAIGHT BORE STOPCOCKS. #15 ACE-THRED ON BOTH ENDS.

8734 Manifold, Vacuum, Dual. COMPLETE DUAL VACUUM GLASS MANIFOLD UNIT WITH FIVE 0-4MM HIGH VACUUM, EASY ACTION STOPCOCKS. UNIT INCLUDES A #15 END PLUG AND TWO ACE-SAFE TUBING CONNECTORS FOR 1/4 AND 1/2 TUBING.

8734 Manifold, Vacuum, Dual. GLASS MANIFOLD WITH FIVE 0-4MM HIGH VACUUM, EASY ACTION STOPCOCKS. 346MM OVERALL LENGTH. #15 ACE-THRED CONNECTION ON BOTH ENDS.

8734 Manifold, Vacuum, Dual. COMPLETE DUAL VACUUM GLASS MANIFOLD UNIT WITH THREE 0-4MM HIGH VACUUM, EASY ACTION STOPCOCKS. UNIT INCLUDES A #15 END PLUG AND TWO ACE-SAFE TUBING CONNECTORS FOR 1/4 AND 1/2 TUBING.

8734 Manifold, Vacuum, Dual. GLASS MANIFOLD WITH THREE 0-4MM HIGH VACUUM, EASY ACTION STOPCOCKS. 232MM OVERALL LENGTH. #15 ACE-THRED CONNECTION ON BOTH ENDS.

8731 MANIFOLD, Tip-Off. 10MM BUSHING TIP-OFF.

8731 MANIFOLD, Tip-Off. 8MM BUSHING TIP-OFF.

8731 MANIFOLD, Tip-Off. 5MM BUSHING TIP-OFF.

8731 MANIFOLD, Tip-Off. 5-10MM 4 PORT MANIFOLDC.

8731 MANIFOLD, Tip-Off. 10MM 1 PORT MANIFOLD.

8731 MANIFOLD, Tip-Off. 8-8MM 2 PORTS MANIFOLDC.

8731 MANIFOLD, Tip-Off. 5-5MM 2 PORTS MANIFOLDC.

8731 MANIFOLD, Tip-Off. MANIFOLD 4 PORTS.

8731 MANIFOLD, Tip-Off. MANIFOLD 1 PORT.

8731 MANIFOLD, Tip-Off. MANIFOLD 8MM 2 PORTS.

8731 MANIFOLD, Tip-Off. MANIFOLD 5MM 2 PORTS.

8730 MANIFOLD, Vacuum. VACUUM MANIFOLD WITH FIVE VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 375MM OVERALL LENGTH WITH RIGHT SIDE HOSE CONNECTION. PTFE PLUGS WITH UHDPE HANDLES.

8730 MANIFOLD, Vacuum. BAKEABLE VACUUM MANIFOLD WITH FOUR VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 320MM OVERALL LENGTH WITH RIGHT SIDE HOSE CONNECTION. PTFE PLUGS WITH PTFE HANDLES.

8730 MANIFOLD, Vacuum. VACUUM MANIFOLD WITH FOUR VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 320MM OVERALL LENGTH WITH RIGHT SIDE HOSE CONNECTION. PTFE PLUGS WITH UHDPE HANDLES.

8730 MANIFOLD, Vacuum. BAKEABLE VACUUM MANIFOLD WITH THREE VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 235MM OVERALL LENGTH WITH RIGHT SIDE HOSE CONNECTION. PTFE PLUGS WITH PTFE HANDLES.

8730 MANIFOLD, Vacuum. VACUUM MANIFOLD WITH THREE VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 235MM OVERALL LENGTH WITH RIGHT SIDE HOSE CONNECTION. PTFE PLUGS WITH UHDPE HANDLES.

8730 MANIFOLD, Vacuum. VACUUM MANIFOLD WITH FIVE VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 375MM OVERALL LENGTH WITH LEFT SIDE HOSE CONNECTION. PTFE PLUGS WITH UHDPE HANDLES.

8730 MANIFOLD, Vacuum. BAKEABLE VACUUM MANIFOLD WITH FOUR VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 320MM OVERALL LENGTH WITH LEFT SIDE HOSE CONNECTION. PTFE PLUGS WITH PTFE HANDLES.

8730 MANIFOLD, Vacuum. VACUUM MANIFOLD WITH FOUR VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 320MM OVERALL LENGTH WITH LEFT SIDE HOSE CONNECTION. PTFE PLUGS WITH UHDPE HANDLES.

8730 MANIFOLD, Vacuum. BAKEABLE VACUUM MANIFOLD WITH THREE VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 235MM OVERALL LENGTH WITH LEFT SIDE HOSE CONNECTION. PTFE PLUGS WITH PTFE HANDLES.

8730 MANIFOLD, Vacuum. VACUUM MANIFOLD WITH THREE VARIABLE OPENING, 0-10MM HIGH VACUUM THREADED STOPCOCK PORTS. 235MM OVERALL LENGTH WITH LEFT SIDE HOSE CONNECTION. PTFE PLUGS WITH UHDPE HANDLES.

8729 MANIFOLD. DOUBLE TUBE MANIFOLD WITH THREE 0-4MM HIGH VACUUM, EASY ACTION PTFE THREE-WAY STOPCOCKS. 300MM MANIFOLD HAS #7 ACE-THRED ON ONE END OF BOTH TUBES. PORT CONNECTIONS ARE 8MM OD. VACUUM AND GAS CONNECTIONS ARE 1/2 OD.

8729 MANIFOLD. MANIFOLD WALTERS.

8729 MANIFOLD. VACUUM TRAP BODY ONLY.

8729 MANIFOLD. VACUUM TRAP INNER TUBE W/S/C.

8729 MANIFOLD. MANIFOLD W/STOPCOCK ONLY.

7190 FUNNEL, Pressure Filter/Drying, Rusek. 60ML POROSITY C RUSEK PRESSURE FILTER/DRYING FUNNEL.

7190 FUNNEL, Pressure Filter/Drying, Rusek. 15ML POROSITY C RUSEK PRESSURE FILTER/DRYING FUNNEL.

7190 FUNNEL, Pressure Filter/Drying, Rusek. 15ML POROSITY A RUSEK PRESSURE FILTER/DRYING FUNNEL.

6448 MANIFOLD, Pressure, Epoxy Coated. 65psi PRESSURE RATED MANIFOLD SYSTEM FOR ACE ONE-PIECE PRESSURE FILTER REACTORS.

6448 MANIFOLD, Pressure, Epoxy Coated. 55psi PRESSURE RATED MANIFOLD SYSTEM FOR ACE TWO-PIECE PRESSURE FILTER REACTORS.

5838 ADAPTER, Bottom Drip, Internal thread. PTFE #25 TO 1/4 FEMALE NPT ADAPTER WITH 100 MICRON POLYETHYLENE FILTER DISC, 350 MICRON POLYPROPYLENE FILTER DISC, RETAINING RING, AND FETFE O-RING.

Chromatography column. 25MM ID 300MM CHROMATOGRAPHY COLUMN WITH #25 ACE-THREDS.

Plastic center ring for 37mm air monitoring cassettes. SAN (styrene acrylonitrile) plastic center ring for 37mm air monitoring cassettes. Compatible with Pall Life Sciences 37mm air monitoring cassettes PN 4338, 4339. Pack of 250.

Accessories for Soxhlet Extraction Apparatus, DWK Life Sciences - 428126, 125 ml, Flat-bottom flask, 125 ml, 24/40

Whatman™ Filter Funnel Plates, Whatman products (Cytiva) - 1950-117, Filter Funnel Plate, 200°C Max. Operating Temperature

Whatman™ Filter Funnel Plates, Whatman products (Cytiva) - 1950-114, Filter Funnel Plate, 200°C Max. Operating Temperature

Whatmanâ„¢ 3-Piece Filter Funnels, Whatman products (Cytiva) - 1950-004, Filter Funnel, 3-piece, 47 mm, 36 ml reservoir

Whatmanâ„¢ 3-Piece Filter Funnels, Whatman products (Cytiva) - 1950-002, Filter Funnel, 3-piece, 25 mm, 16 ml reservoir

FRITTED FILTER DISC. 150. Disc O.D: 150; Porosity: XC. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 125. Disc O.D: 125; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 125. Disc O.D: 125; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 100. Disc O.D: 100; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 100. Disc O.D: 100; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 100. Disc O.D: 100; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 90. Disc O.D: 90; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 90. Disc O.D: 90; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 90. Disc O.D: 90; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 90. Disc O.D: 90; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 80. Disc O.D: 80; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 80. Disc O.D: 80; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 80. Disc O.D: 80; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 75. Disc O.D: 75; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 75. Disc O.D: 75; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 75. Disc O.D: 75; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 75. Disc O.D: 75; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 70. Disc O.D: 70; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 70. Disc O.D: 70; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 70. Disc O.D: 70; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 60. Disc O.D: 60; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 60. Disc O.D: 60; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 60. Disc O.D: 60; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 60. Disc O.D: 60; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 50. Disc O.D: 50; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 50. Disc O.D: 50; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 50. Disc O.D: 50; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 50. Disc O.D; 50; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 40. Disc O.D; 40; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 40. Disc O.D; 40; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 40. Disc O.D; 40; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 40. Disc O.D; 40; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 35. Disc O.D; 35; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 35. Disc O.D; 35; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 30. Disc O.D; 30; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 30. Disc O.D; 30; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 30. Disc O.D; 30; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 30. Disc O.D; 30; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 25. Disc O.D; 25; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 25. Disc O.D; 25; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 25. Disc O.D; 25; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 25. Disc O.D; 25; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 20. Disc O.D; 20; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 20. Disc O.D; 20; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Wahing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 20. Disc O.D; 20; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 20. Disc O.D; 20; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 15. Disc O.D; 15; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Wahing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 15. Disc O.D; 15; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 15. Disc O.D; 15; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 15. Disc O.D; 15; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 12. Disc O.D; 12; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 12. Disc O.D; 12; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 12. Disc O.D; 12; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extracion. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 12. Disc O.D; 12; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 10. Disc O.D; 10; Porosity: X-C. Porosity Grade: Extra Coarse. ASTM Designation: XC. Pore Size Micron: 170-220. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 10. Disc O.D; 10; Porosity: C. Porosity Grade: Coarse. ASTM Designation: C. Pore Size Micron: 40-60. Principal Uses: Gas Dispersion, Gas Washing and absorption. Coarse Filtration. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 10. Disc O.D; 10; Porosity: M. Porosity Grade: Medium. ASTM Designation: M. Pore Size Micron: 10-16. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

FRITTED FILTER DISC. 10. Disc O.D; 10; Porosity: F. Porosity Grade: Fine. ASTM Designation: F. Pore Size Micron: 4.0-5.5. Principal Uses: Filtration and Extraction. Porous discs for use in fabrication of special glass apparatus.

General Purpose Vacuum/Inert Manifold. Banks are made from -+ medium wall tubing with 10 mm O.D. serrated connections. Stopcocks are glass 4 mm bore with lower vacuum chamber and are spaced 85 mm center to center. Has top right connection to inert gas, lower left connection for vacuum. Has 3 ports.

Pressure Vessel, Heavy Wall. Complete Round Bottom Apparatus. Volume: 350mL. O.D.xOverall Length: 82.5x142mm. Internal thread for use with a 15mm fluoropolymer resin bushing as a pressure seal. Supplied with vessel, bushing, and Viton O-ring.

Pressure Vessel, Heavy Wall. Complete Round Bottom Apparatus. Volume: 150mL. O.D.xOverall Length: 63.5x117mm. Internal thread for use with a 15mm fluoropolymer resin bushing as a pressure seal. Supplied with vessel, bushing, and Viton O-ring.

Pressure Vessel, Heavy Wall. Complete Round Bottom Apparatus. Volume: 75mL. O.D.xOverall Length: 52x102mm. Internal thread for use with a 15mm fluoropolymer resin bushing as a pressure seal. Supplied with vessel, bushing, and Viton O-ring.

Pressure Vessel, Heavy Wall. Complete Cylindrical Apparatus. Volume: 100mL. O.D.xOverall Length: 38x190mm. Internal thread for use with a 15mm fluoropolymer resin bushing as a pressure seal. Supplied with vessel, bushing, and Viton O-ring.

Pressure Vessel, Heavy Wall. Complete Cylindrical Apparatus. Volume: 35mL. O.D.xOverall Length: 25.4x190mm. Internal thread for use with a 15mm fluoropolymer resin bushing as a pressure seal. Supplied with vessel, bushing, and Viton O-ring.

Pressure Vessel, Heavy Wall. Complete Cylindrical Apparatus. Volume: 15mL. O.D.xOverall Length: 25.4x114mm. Internal thread for use with a 15mm fluoropolymer resin bushing as a pressure seal. Supplied with vessel, bushing, and Viton O-ring.

SUPPORT ASSEMBLY, 47MM FRITTED, 40/35. Accessories. Cap, Filtering Flask, 40/35. Glassware system for vacuum filtration using 47mm membranes.

SUPPORT ASSEMBLY, 47MM FRITTED, 40/35. Accessories. Flask, 4L Coated Filtering, 40/35. Glassware system for vacuum filtration using 47mm membranes.

SUPPORT ASSEMBLY, 47MM FRITTED, 40/35. Accessories. Flask, 2L Coated Filtering, 40/35. Glassware system for vacuum filtration using 47mm membranes.

SUPPORT ASSEMBLY, 47MM FRITTED, 40/35. Replacement Components. Flask, 1L Coated Filtering, 40/35. Glassware system for vacuum filtration using 47mm membranes.

SUPPORT ASSEMBLY, 47MM FRITTED, 40/35. Replacement Components. Base, 47mm Fritted Support, 40/35. Glassware system for vacuum filtration using 47mm membranes.

SUPPORT ASSEMBLY, 47MM FRITTED. Accessories. Flask, 1L Coated Filtering, #10 Stopper. Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc.

SUPPORT ASSEMBLY, 47MM FRITTED. Replacement Components. Stopper, #10 Silicone, 9/16in. Hole. Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask.

SUPPORT ASSEMBLY, 47MM FRITTED. Replacement Components. Base, 47mm Fritted Support. Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc.

SUPPORT ASSEMBLY, 47MM FRITTED. Replacement Components. Clamp, 47mm Aluminum. Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc.

SUPPORT ASSEMBLY, 47MM FRITTED. Replacement Components. Funnel, 47mm, 300ml Graduated. Glassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask.

FILTER TUBE, ALLIHN. Porosity: Fine. Allihn type filter tube with a 30mm O.D. disc. Height above the disc is 100mm, lower stem is 8mm O.D.x55mm in length.

FILTER TUBE, ALLIHN. Porosity: Medium. Allihn type filter tube with a 30mm O.D. disc. Height above the disc is 100mm, lower stem is 8mm O.D.x55mm in length.

FILTER TUBE, ALLIHN. Porosity: Coarse. Allihn type filter tube with a 30mm O.D. disc. Height above the disc is 100mm, lower stem is 8mm O.D.x55mm in length.

FILTERING TUBE, REDUCED ENDS. 50. Disc Diameter: 50; Porosity: M; Hose Connection O.D; 16mm. Useful in filtering operations for the preparation of organic chemicals and biologic solutions, or to remove end products of a reaction during recirculation of the liquid reactants.

FILTERING TUBE, REDUCED ENDS. 30. Disc Diameter: 30; Porosity: M; Hose Connection O.D; 10mm. Useful in filtering operations for the preparation of organic chemicals and biologic solutions, or to remove end products of a reaction during recirculation of the liquid reactants.

FILTERING TUBE, REDUCED ENDS. 20. Disc Diameter: 20; Porosity: M; Hose Connection O.D; 8mm. Useful in filtering operations for the preparation of organic chemicals and biologic solutions, or to remove end products of a reaction during recirculation of the liquid reactants.

FILTERING TUBE, REDUCED ENDS. 20. Disc Diameter: 20; Porosity: C; Hose Connection O.D; 8mm. Useful in filtering operations for the preparation of organic chemicals and biologic solutions, or to remove end products of a reaction during recirculation of the liquid reactants.

CONDENSER, COLD FINGER. Length Below Joint: 100mm. Joint size: 14/20. Condenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an O.D. of 10mm at the middle serration.

CONDENSER, COLD FINGER. Length Below Joint: 200mm. Joint size: 29/42. Condenser has an inner joint and a sealed lower drip tip for drop control. Hose connections have an O.D. of 10mm at the middle serration.

FILTER TUBE, AIRFREE. Joint size: 24/40. Frit O.D; 40mm; Porosity: Medium; Stopcock Type: Glass. Similar to AF-0544, but with the addition of two 2mm glass stopcocks with constant pressure retension devices or all fluoropolymer resin AIRFREE valves at either end of the tube.

FILTER TUBE, AIRFREE. Joint size: 24/40. Frit O.D; 40mm; Porosity: Coarse; Stopcock Type: Glass. Similar to AF-0544, but with the addition of two 2mm glass stopcocks with constant pressure retension devices or all fluoropolymer resin AIRFREE valves at either end of the tube.

FILTER TUBE, AIRFREE. Joint size: 14/20. Frit O.D; 30mm; Porosity: Medium; Stopcock Type: Glass. Similar to AF-0544, but with the addition of two 2mm glass stopcocks with constant pressure retension devices or all fluoropolymer resin AIRFREE valves at either end of the tube.

FILTER TUBE, AIRFREE. Joint size: 14/20. Frit O.D; 30mm; Porosity: Coarse; Stopcock Type: Glass. Similar to AF-0544, but with the addition of two 2mm glass stopcocks with constant pressure retension devices or all fluoropolymer resin AIRFREE valves at either end of the tube.

FILTER TUBE, AIRFREE. Joint size: 14/20. Frit O.D; 20mm; Porosity: Medium; Stopcock Type: Glass. Similar to AF-0544, but with the addition of two 2mm glass stopcocks with constant pressure retension devices or all fluoropolymer resin AIRFREE valves at either end of the tube.

FILTER TUBE, AIRFREE. Joint size: 14/20. Frit O.D; 20mm; Porosity: Coarse; Stopcock Type: Glass. Similar to AF-0544, but with the addition of two 2mm glass stopcocks with constant pressure retension devices or all fluoropolymer resin AIRFREE valves at either end of the tube.

FILTER TUBE, AIRFREE. Joint size: 24/40. Frit O.D; 40mm; Porosity: Medium. Tube allows for filtration followed by collection of crystals on opposite side of fritted disc. With standard taper inner joints at both ends being of the same size.

FILTER TUBE, AIRFREE. Joint size: 24/40. Frit O.D; 40mm; Porosity: Coarse. Tube allows for filtration followed by collection of crystals on opposite side of fritted disc. With standard taper inner joints at both ends being of the same size.

FILTER TUBE, AIRFREE. Joint size: 14/20. Frit O.D; 30mm; Porosity: Medium. Tube allows for filtration followed by collection of crystals on opposite side of fritted disc. With standard taper inner joints at both ends being of the same size.

FILTER TUBE, AIRFREE. Joint size: 14/20. Frit O.D; 20mm; Porosity: Medium. Tube allows for filtration followed by collection of crystals on opposite side of fritted disc. With standard taper inner joints at both ends being of the same size.

FILTER TUBE, AIRFREE. Joint size: 14/20. Frit O.D; 20mm; Porosity: Coarse. Tube allows for filtration followed by collection of crystals on opposite side of fritted disc. With standard taper inner joints at both ends being of the same size.

SWIVEL FRIT FILTER, AIRFREE. 90[degree] Swivel Adapter Only. Joint size: Outer: 24/40. Used in the filtration and recrystallization of highly sensitive materials.

SWIVEL FRIT FILTER, AIRFREE. 90[degree] Swivel Adapter Only. Joint size: Outer: 14/20. Used in the filtration and recrystallization of highly sensitive materials.

SWIVEL FRIT FILTER, AIRFREE. Filter Tube Only. Diameter of Filter: 30mm; Filter Porosity: Medium. Used in the filtration and recrystallization of highly sensitive materials.

SWIVEL FRIT FILTER, AIRFREE. Filter Tube Only. Diameter of Filter: 20mm; Filter Porosity: Medium. Used in the filtration and recrystallization of highly sensitive materials.

SWIVEL FRIT FILTER, AIRFREE. Filter Tube Only. Diameter of Filter: 10mm; Filter Porosity: Medium. Used in the filtration and recrystallization of highly sensitive materials.

BUBBLER, PRESSURE RELEASE, AIRFREE. Bubbler, Complete. Unique design of bubbler allows for fine control of purge gas within an inert gas system such as a manifold. Purge gas enters bubbler thru hose connection (A) and exits thru connection (B).

MANIFOLD VACUUM / INERT GAS, AIRFREE, SOUZA. Number of Ports: 5; Overall Width: 600mm. Unique design, double bank manifold with the valves sealed in a vertical position.

MANIFOLD VACUUM / INERT GAS, AIRFREE, SOUZA. Number of Ports: 4; Overall Width: 500mm. Unique design, double bank manifold with the valves sealed in a vertical position.

MANIFOLD VACUUM / INERT GAS, AIRFREE, SOUZA. Number of Ports: 3; Overall Width: 400mm. Unique design, double bank manifold with the valves sealed in a vertical position.

MANIFOLD, VACUUM, AIRFREE. Number of Ports: 5; Overall Width: 465mm. Single bank manifold with 0-8mm Chem-Cap valves mounted on a 45[degree] angle to the user permitting easy operation inside of a fume hood. Ports are spaced 75mm center to center. All connection ports are 15mm I.D.

MANIFOLD, VACUUM, AIRFREE. Number of Ports: 4; Overall Width: 390mm. Single bank manifold with 0-8mm Chem-Cap valves mounted on a 45[degree] angle to the user permitting easy operation inside of a fume hood. Ports are spaced 75mm center to center. All connection ports are 15mm I.D.

MANIFOLD, VACUUM, AIRFREE. Number of Ports: 3; Overall Width: 315mm. Single bank manifold with 0-8mm Chem-Cap valves mounted on a 45[degree] angle to the user permitting easy operation inside of a fume hood. Ports are spaced 75mm center to center. All connection ports are 15mm I.D.

MANIFOLD VACUUM / INERT GAS AIRFREE. Number of Ports: 5; Overall Width: 610mm. Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Cap valves permit easy operation of manifold inside of a fume hood.

MANIFOLD VACUUM / INERT GAS AIRFREE. Number of Ports: 4; Overall Width: 510mm. Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Cap valves permit easy operation of manifold inside of a fume hood.

MANIFOLD VACUUM / INERT GAS AIRFREE. Number of Ports: 3; Overall Width: 410mm. Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Cap valves permit easy operation of manifold inside of a fume hood.

Septum Stopper, Suba-Seal. Fits 24/25-24/40 joints. Fits 20.5mm ID tubing.

FILTER ADAPTER, NEOPRENE. Size 7. Height: 45mm. I.D. Top/Bottom: 75x46mm. O.D. Top/Bottom: 86x57mm. Wall Thickness: 5.5. Neoprene filter adapters are designed to fit between the filtering funnel and flask. For use with Buchner funnels, Grooch crucibles, filter tubes etc.

PUMP, OIL DIFFUSION, FOR PORTABLE VACUUM SYSTEM, AIRFREE. Replacement Components. Diffusion Pump Oil, 500cc Bottle. Single stage oil diffusion pump supplied with AF-0300-D portable vacuum system. Pump will provide vacuum of 1.0 millitorr, at a pumping rate of approx. 8 liters per second.

PUMP, OIL DIFFUSION, WITH BYPASS, AIRFREE. Diffusion Pump, Right Handed. Single stage oil diffusion pump useful with manifolds such as AF-0450 through AF-0454. Will provide vacuum of 1.0 millitorr, at a pumping rate of approx. 8 liters per second.

CAJON CUFFS ONLY. Size: 1in. Cuff adapters MUST be used between AF-0067 unions and AF-0069 flexible tubing. They are made of 304 stainless steel, and the adapters do not require welding or brazing to tubing to insure a leak tight seal.

CAJON CUFFS ONLY. Size: 3/8in. Cuff adapters MUST be used between AF-0067 unions and AF-0069 flexible tubing. They are made of 304 stainless steel, and the adapters do not require welding or brazing to tubing to insure a leak tight seal.

CAJON CUFFS ONLY. Size: 1/4in. Cuff adapters MUST be used between AF-0067 unions and AF-0069 flexible tubing. They are made of 304 stainless steel, and the adapters do not require welding or brazing to tubing to insure a leak tight seal.

CAJON Unions Only. Replacement Viton O-Rings. Package of 10 for 1in. Unions. Unions provide seals directly from the listed sizes on a glass to glass basis, or used with the AF-0068 cuffs and flexible tubing. They can be used with glass tubing as much as 1/32in. undersize.

CAJON Unions Only. Replacement Viton O-Rings. Package of 10 for 3/8in. Unions. Unions provide seals directly from the listed sizes on a glass to glass basis, or used with the AF-0068 cuffs and flexible tubing. They can be used with glass tubing as much as 1/32in. undersize.

CAJON Unions Only. Replacement Viton O-Rings. Package of 10 for 1/4in. Unions. Unions provide seals directly from the listed sizes on a glass to glass basis, or used with the AF-0068 cuffs and flexible tubing. They can be used with glass tubing as much as 1/32in. undersize.

CAJON Unions Only. For Use with Tube O.D; 1in. Unions provide seals directly from the listed sizes on a glass to glass basis, or used with the AF-0068 cuffs and flexible tubing. They can be used with glass tubing as much as 1/32in. undersize. Replacement o-rings are sold in packages of 10 each.

CAJON Unions Only. For Use with Tube O.D; 3/8in. Unions provide seals directly from the listed sizes on a glass to glass basis, or used with the AF-0068 cuffs and flexible tubing. They can be used with glass tubing as much as 1/32in. undersize. Replacement o-rings are sold in packages of 10 each.

CAJON Unions Only. For Use with Tube O.D; 1/4in. Unions provide seals directly from the listed sizes on a glass to glass basis, or used with the AF-0068 cuffs and flexible tubing. They can be used with glass tubing as much as 1/32in. undersize. Replacement o-rings are sold in packages of 10 each.

ADAPTER, FLEXIBLE, CAJON ULTRA-TORR. For Use with Tube O.D; 1in.; Nominal Flexible Length: 12in. Cajon adapters provide the flexibility of rubber tubing and are the ideal replacement for rubber, plastic or glass tubing in critical vacuum applications.

ADAPTER, FLEXIBLE, CAJON ULTRA-TORR. For Use with Tube O.D; 1in.; Nominal Flexible Length: 6in. Cajon adapters provide the flexibility of rubber tubing and are the ideal replacement for rubber, plastic or glass tubing in critical vacuum applications.

ADAPTER, FLEXIBLE, CAJON ULTRA-TORR. For Use with Tube O.D; 3/8in.; Nominal Flexible Length: 12in. Cajon adapters provide the flexibility of rubber tubing and are the ideal replacement for rubber, plastic or glass tubing in critical vacuum applications.

ADAPTER, FLEXIBLE, CAJON ULTRA-TORR. For Use with Tube O.D; 3/8in.; Nominal Flexible Length: 12in. Cajon adapters provide the flexibility of rubber tubing and are the ideal replacement for rubber, plastic or glass tubing in critical vacuum applications.

ADAPTER, FLEXIBLE, CAJON ULTRA-TORR. For Use with Tube O.D; 3/8in.; Nominal Flexible Length: 6in. Cajon adapters provide the flexibility of rubber tubing and are the ideal replacement for rubber, plastic or glass tubing in critical vacuum applications.

ADAPTER, FLEXIBLE, CAJON ULTRA-TORR. For Use with Tube O.D; 1/4in.; Nominal Flexible Length: 24in. Cajon adapters provide the flexibility of rubber tubing and are the ideal replacement for rubber, plastic or glass tubing in critical vacuum applications.

ADAPTER, FLEXIBLE, CAJON ULTRA-TORR. For Use with Tube O.D; 1/4in.; Nominal Flexible Length: 12in. Cajon adapters provide the flexibility of rubber tubing and are the ideal replacement for rubber, plastic or glass tubing in critical vacuum applications.

ADAPTER, FLEXIBLE, CAJON ULTRA-TORR. For Use with Tube O.D; 1/4in.; Nominal Flexible Length: 6in. Cajon adapters provide the flexibility of rubber tubing and are the ideal replacement for rubber, plastic or glass tubing in critical vacuum applications.

Filter Rigid Merv14 24X24X12. Vpp-S-9504-H-D 90[perCent]-95[perCent], all plastic construction, highly durable dura-tuff 100[perCent] synthetic media, moisture and chemical resistant, fully incinerateable, low resistance, three efficiencies - 90-95[perCent](merv 15), 80-85[perCent] (merv 13), 60-65[perCent] (merv 11)

Filter Rigid Merv14 12X24X12. Vpp-S-9503-D 90[perCent]-95[perCent], all plastic construction, highly durable dura-tuff 100[perCent] synthetic media, moisture and chemical resistant, fully incinerateable, low resistance, three efficiencies - 90-95[perCent](merv 15), 80-85[perCent] (merv 13), 60-65[perCent] (merv 11)

Filter Rigid Merv14 12X24X12. Vpp-S-9503 90[perCent]-95[perCent], all plastic construction, highly durable dura-tuff 100[perCent] synthetic media, moisture and chemical resistant, fully incinerateable, low resistance, three efficiencies - 90-95[perCent](merv 15), 80-85[perCent] (merv 13), 60-65[perCent] (merv 11)

Filter Rigid Merv13 20X24X12. Vpp-S-8515 80[perCent]-85[perCent], all plastic construction, highly durable dura-tuff 100[perCent] synthetic media, moisture and chemical resistant, fully incinerateable, low resistance, three efficiencies - 90-95[perCent](merv 15), 80-85[perCent] (merv 13), 60-65[perCent] (merv 11)

Filter Rigid Merv13 24X24X12. Vpp-S-8504-H-R-D 80[perCent]-85[perCent], all plastic construction, highly durable dura-tuff 100[perCent] synthetic media, moisture and chemical resistant, fully incinerateable, low resistance, three efficiencies - 90-95[perCent](merv 15), 80-85[perCent] (merv 13), 60-65[perCent] (merv 11)

Filter Rigid Merv11 20X24X12. Vpp2V-S-6515 60[perCent]-65[perCent], all plastic construction, highly durable dura-tuff 100[perCent] synthetic media, moisture and chemical resistant, fully incinerable, low resistance, three efficiencies - 90-95[perCent](merv 14), 80-85[perCent] (merv 13), 60-65[perCent] (merv 11)

Filter Rigid Merv11 24X24X12. Vpp2V-S-6504 60[perCent]-65[perCent], all plastic construction, highly durable dura-tuff 100[perCent] synthetic media, moisture and chemical resistant, fully incinerable, low resistance, three efficiencies - 90-95[perCent](merv 14), 80-85[perCent] (merv 13), 60-65[perCent] (merv 11)

Filter Rigid Merv15 20X24X12. Vpl-9815 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, mini-pleat adhesive bead separators, v-bank assembly of mini-pleat media packs, large media area, low resistance, five efficiencies - 95[perCent], 90-95[perCent], 80-85[perCent], 60-65[perCent], 95[perCent] dop

Filter Rigid Merv13 20X24X12. Vpl-8515 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, mini-pleat adhesive bead separators, v-bank assembly of mini-pleat media packs, large media area, low resistance, five efficiencies - 95[perCent], 90-95[perCent], 80-85[perCent], 60-65[perCent], 95[perCent] dop

Filter Rigid Merv14 20X20X12. Vmc-913 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 24X24X6. Vmc-902 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 12X24X6. Vmc-901 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv13 20X20X12. Vmc-813 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 16X25X12. Vmc-810 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 24X24X6. Vmc-802 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv11 20X24X6. Vmc-616 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 20X25X12. Vmc-612 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 24X24X6. Vmc-602 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 12X24X6. Vmc-601 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv14 20X20X12. Vmb-913-Ht-900-D 90[perCent]-95[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv14 20X20X12. Vmb-913 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 18X24X12. Vmb-911 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 16X25X12. Vmb-910 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 16X25X6. Vmb-906 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 24X24X12. Vmb-904-Ht-500-D 90[perCent]-95[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv14 24X24X12. Vmb-904 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 12X24X12. Vmb-903-Ht-900-D 90[perCent]-95[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv14 12X24X12. Vmb-903-Ht-750-D 90[perCent]-95[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv14 12X24X12. Vmb-903-Ht-500-D 90[perCent]-95[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv14 12X24X12. Vmb-903 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 24X24X6. Vmb-902 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 12X24X6. Vmb-901 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv13 20X24X6. Vmb-816 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 20X20X12. Vmb-813-Ht-900-D 80[perCent]-85[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf

Filter Rigid Merv13 20X20X12. Vmb-813-Ht-750-D 80[perCent]-85[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf

Filter Rigid Merv13 18X24X12. Vmb-811 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 16X25X12. Vmb-810 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 20X25X6. Vmb-808 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 12X24X12. Vmb-803-Ht-750-D 80[perCent]-85[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf

Filter Rigid Merv11 20X24X6. Vmb-616 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 20X20X6. Vmb-614 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 20X20X12. Vmb-613-Ht-900-D 60[perCent]-65[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv11 20X20X12. Vmb-613-Ht-750-D 60[perCent]-65[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv11 18X24X12. Vmb-611 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 16X25X12. Vmb-610 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 16X20X12. Vmb-609 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 20X25X6. Vmb-608 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 18X24X6. Vmb-607 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 16X25X6. Vmb-606 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 24X24X12. Vmb-604-Ht-900-D 60[perCent]-65[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv11 24X24X12. Vmb-604-Ht-750-D 60[perCent]-65[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv11 24X24X12. Vmb-604-Ht-500-D 60[perCent]-65[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv11 24X24X12. Vmb-604 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 12X24X12. Vmb-603-Ht-900-D 60[perCent]-65[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv11 12X24X12. Vmb-603-Ht-750-D 60[perCent]-65[perCent], rigid metal box construction, single header construction (standard), double header (optional), 12in and 6in depths, 24 gauge aluminized steel sides, high temp. glass wrap sealant, three temp. ranges - 500degf, 750degf, 900degf.

Filter Rigid Merv11 12X24X6. Vmb-601 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv14 20X24X12. Vma-915 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 20X20X12. Vma-913 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 20X25X12. Vma-912 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 18X24X12. Vma-911 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 16X25X12. Vma-910 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 24X24X6. Vma-902 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 12X24X6. Vma-901 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv13 20X24X6. Vma-816 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 20X20X12. Vma-813 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 20X25X12. Vma-812 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 18X24X12. Vma-811 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 16X25X12. Vma-810 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 20X25X6. Vma-808 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 16X25X6. Vma-806 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 24X24X12. Vma-804 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 12X24X12. Vma-803 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv13 24X24X6. Vma-802 80[perCent]-85[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 80-85[perCent] efficiency

Filter Rigid Merv11 20X24X6. Vma-616 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 18X24X12. Vma-611 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 16X25X6. Vma-606 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 24X24X12. Vma-604 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 24X24X6. Vma-602 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv11 12X24X6. Vma-601 60[perCent]-65[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 60-65[perCent] efficiency

Filter Rigid Merv14 20X24X12. Vfc-915 90[perCent]-95[perCent], ultrafine microglass paper media, moisture resistant construction, single header, double header, no header models, metal and wood cell sides, corrugated aluminum separators, high temperature models up to 900degf. 90-95[perCent] efficiency

Filter Rigid Merv14 20X20X4. Vf2-M-4913 90[perCent]-95[perCent], galvanized steel cell sides, box construction - no header, 2in and 4in thicknesses, adhesive bead separators, 90-95[perCent], 60-65[perCent] efficiencies

Filter Rigid Merv11 12X12X4. Vf2-M-4622 60[perCent]-65[perCent], galvanized steel cell sides, box construction - no header, 2in and 4in thicknesses, adhesive bead separators, 90-95[perCent], 60-65[perCent] efficiencies

Filter Rigid Merv11 20X25X4. Vf2-M-4612 60[perCent]-65[perCent], galvanized steel cell sides, box construction - no header, 2in and 4in thicknesses, adhesive bead separators, 90-95[perCent], 60-65[perCent] efficiencies

Filter Rigid Merv11 16X20X4. Vf2-M-4609 60[perCent]-65[perCent], galvanized steel cell sides, box construction - no header, 2in and 4in thicknesses, adhesive bead separators, 90-95[perCent], 60-65[perCent] efficiencies

Filter Rigid Merv11 24X24X4. Vf2-M-4604 60[perCent]-65[perCent], galvanized steel cell sides, box construction - no header, 2in and 4in thicknesses, adhesive bead separators, 90-95[perCent], 60-65[perCent] efficiencies

Filter Rigid Merv14 20X20X6. Rs-914-Ph 90[perCent]-95[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 20X20X6. Rs-914 90[perCent]-95[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X12X12. Rs-903-Ph 90[perCent]-95[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X12X12. Rs-903 90[perCent]-95[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X24X6. Rs-902-Ph 90[perCent]-95[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X24X6. Rs-902 90[perCent]-95[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 20X20X6. Rs-814-Ph 90[perCent]-95[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 20X20X6. Rs-814 80[perCent]-85[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X24X12. Rs-804-Ph 80[perCent]-85[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X24X12. Rs-804 80[perCent]-85[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X12X12. Rs-803-Ph 80[perCent]-85[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X12X12. Rs-803 80[perCent]-85[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X24X6. Rs-802-Ph 80[perCent]-85[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X24X6. Rs-802 80[perCent]-85[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv11 20X20X6. Rs-614-Ph 60[perCent]-65[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv11 20X20X6. Rs-614 60[perCent]-65[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv11 24X24X12. Rs-604-Ph 60[perCent]-65[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv11 24X24X12. Rs-604 60[perCent]-65[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv11 24X12X12. Rs-603-Ph 60[perCent]-65[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv11 24X12X12. Rs-603 60[perCent]-65[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv11 24X24X6. Rs-602-Ph 60[perCent]-65[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv11 24X24X6. Rs-602 60[perCent]-65[perCent], dual layer microfine synthetic media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X20X12. R-915 90[perCent]-95[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 20X20X6. R-914-Ph 90[perCent]-95[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X24X12. R-904 90[perCent]-95[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X12X12. R-903-Ph 90[perCent]-95[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X12X12. R-903 90[perCent]-95[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv14 24X24X6. R-902-Ph 90[perCent]-95[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X20X12. R-815 80[perCent]-85[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 20X20X6. R-814-Ph 80[perCent]-85[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 20X20X12. R-813 80[perCent]-85[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X24X12. R-804 80[perCent]-85[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X12X12. R-803-Ph 80[perCent]-85[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X12X12. R-803 80[perCent]-85[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Filter Rigid Merv13 24X24X6. R-802-Ph 80[perCent]-85[perCent], ultrafine high loft microglass media, pleated construction with pleat stabilizers (fingers) on both sides, galvanized steel cell sides, box construction (no header) and header models, four efficiencies - 90-95[perCent], 80-85[perCent], 60-65[perCent], 50-55[perCent]

Cartridge Filter Depth Cs20. Px30-40 ge water purtrex depth filter cartridge, length 40

Cartridge Filter Depth Cs20. Px20-40 ge water purtrex depth filter cartridge, length 40

Cartridge Filter Depth Cs40. Px20-10 ge water purtrex depth filter cartridge, length 10

Cartridge Filter Depth Cs20. Px10-30 ge water purtrex depth filter cartridge, length 30

Cartridge Filter Depth Cs20. Px10-20 ge water purtrex depth filter cartridge, length 20

Cartridge Filter Depth Cs40. Px10-10 ge water purtrex depth filter cartridge, length 10

Cartridge Filter Depth Cs20. Px05-40 ge water purtrex depth filter cartridge, length 40

Cartridge Filter Depth Cs20. Px05-30 ge water purtrex depth filter cartridge, length 30

Cartridge Filter Depth Cs20. Px05-20 ge water purtrex depth filter cartridge, length 20

Cartridge Filter Depth CS 20. Purtrex depth cartridge filter, length 20

Cartridge Filter Depth Cs20. Px03-20 ge water purtrex depth filter cartridge, length 10

Cartridge Filter Depth Cs20. Px01-20 ge water purtrex depth filter cartridge, length 20

Cartridge Filter Depth Cs40. Px01-10 ge water purtrex depth filter cartridge, length 10

Filter Plet Air Merv11 25X25X2. Pwg-25X25X2 1in, 2in, 4in thickness, die cut beverage board frame, high loft 100[perCent] synthetic pleated media, 14.3 pleats per foot (2in), 35[perCent]-40[perCent] efficiency, merv-11

Filter Plet Air Merv11 25X25X1. Pwg-25X25X1 1in, 2in, 4in thickness, die cut beverage board frame, high loft 100[perCent] synthetic pleated media, 14.3 pleats per foot (2in), 35[perCent]-40[perCent] efficiency, merv-11

Filter Bag Liquid 5U #3 Cs50. Pe5P3Sh polyester felt 5 micron size #3 steel ring w/handle

Filter Bag Liquid 25U #1 Cs50. Pe25P1Sh polyester felt 25 micron size #1 steel ring w/handle

Filter Bag Liquid 1U #8 Cs50. Pe1P8Sh polyester felt 1 micron size #8 steel ring w/handle

Filter Bag Liquid 1U #2 Cs50. Pe1P2Sh polyester felt 1 micron size #2 steel ring w/handle

Filter Bag Liquid 10U #4 Cs50. Pe10P4Sh polyester felt 10 micron size #4 steel ring w/handle

Filter Bag Liquid 10U #1 Cs50. Pe10P1Sh polyester felt 10 micron size #1 steel ring w/handle

Filter Bag Liquid 100U #1 Cs50. Pe100P1Sh polyester felt 100 micron size #1 steel ring w/handle

Filterkit 90Cx96L Bagin/Bagout. Filter kit designed to minimize the contamination by offering a system to keep contamination in secure enclosed environment.

Filter Pleated Air 25X29X4(+). Paf11-Std-25X29X4(+) self-supported, extended surface, pleated air filters. manufactured for system applications requiring high efficiency, nonshedding filtration media. effective in single filter applications or as improved pre-filter substitutes for disposables.

Filter Panel Syn Disp 15X23X1. P312 filters disposable panel filters available in 1inand 2in thicknesses. they are made of synthetic media developed for situations were synthetic media products are required. the p312 filters are ideally suited for residential, commercial or light industrial use.

Filter Panel Syn Disp 12X24X1. P312 filters disposable panel filters available in 1inand 2in thicknesses. they are made of synthetic media developed for situations were synthetic media products are required. the p312 filters are ideally suited for residential, commercial or light industrial use.

Filter Bag Liquid 55U #1 Cs50. Nmo55P1P nylon/mono 55 micron size #1 plastic flange

Filter Bag Liquid 50U #2 Cs50. Nmo50P2Sh nylon/mono 50 micron size #2 steel ring w/handle

Filter Bag Liquid 400Urp1 Cs50. Nmo400Rp1P nylon/mono 400 micron size rp1 plastic flange

Filter Bag Liquid 400U #2 Cs50. Nmo400P2Q nylon/mono 400 micron size #2 plastic flange

Filter Bag Liquid 35U #1 Cs50. Nmo35P1P nylon/mono 35 micron size #1 plastic flange

Filter Plet Air Merv8 20X20X1. Mx40-Std-20X20X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X25X2. Mx40-Std-18X25X2 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X25X1. Mx40-Std-18X25X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X24X6. Mx40-Std-18X24X6 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X24X4. Mx40-Std-18X24X4 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X24X1. Mx40-Std-18X24X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X20X2. Mx40-Std-18X20X2 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X25X6. Mx40-Std-16X25X6 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X25X4. Mx40-Std-16X25X4 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X25X1. Mx40-Std-16X25X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X24X2. Mx40-Std-16X24X2 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X20X6. Mx40-Std-16X20X6 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X20X4. Mx40-Std-16X20X4 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X20X1. Mx40-Std-16X20X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X16X1. Mx40-Std-16X16X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 15X20X2. Mx40-Std-15X20X2 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 15X20X1. Mx40-Std-15X20X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 14X25X2. Mx40-Std-14X25X2 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 14X25X1. Mx40-Std-14X25X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 14X20X2. Mx40-Std-14X20X2 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 14X20X1. Mx40-Std-14X20X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X24X6. Mx40-Std-12X24X6 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X24X4. Mx40-Std-12X24X4 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X24X1. Mx40-Std-12X24X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X20X2. Mx40-Std-12X20X2 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X20X1. Mx40-Std-12X20X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 10X20X2. Mx40-Std-10X20X2 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 10X20X1. Mx40-Std-10X20X1 1in, 2in, 4in, 6in thickness, die cut beverage board frame, 100[perCent] synthetic media, 10 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X24X4. Mx1-410 1in, 2in, 4in thickness, classified u.l. class 1, non-flammable die cut board frame, ultrafine fiberglass media, 35[perCent]-40[perCent] efficiency, merv-8

Filter Plet Air Merv8 24X24X4. Mx1-405 1in, 2in, 4in thickness, classified u.l. class 1, non-flammable die cut board frame, ultrafine fiberglass media, 35[perCent]-40[perCent] efficiency, merv-8

Filter Rigid Merv15 20X20X12. Lg-913 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 15, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv15 24X24X12. Lg-904 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 15, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv15 12X24X12. Lg-903 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 15, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv15 20X24X12. Lg-615 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 15, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv15 20X20X12. Lg-613 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 15, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv15 24X24X12. Lg-604 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 15, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv15 12X24X12. Lg-603 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 15, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv14 20X25X4. Lg4-912 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 14, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv14 16X25X4. Lg4-910 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 14, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv14 16X20X4. Lg4-909 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 14, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv14 20X24X4. Lg4-615 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 14, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv14 20X20X4. Lg4-613 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 14, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv14 20X25X4. Lg4-612 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 14, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv14 16X25X4. Lg4-610 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 14, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Filter Rigid Merv14 16X20X4. Lg4-609 90[perCent]-95[perCent], unique channel flow molded media, merv 11 and 14, very low resistance, high dust holding capacity, all plastic construction, sustainable component for leed/green building initiative, exceeds leed/green merv 13 requirement, lower energy cost.

Cartridge Ld Depth Cs5. Ld50-20 ge water aquatrex ld depth filter cartridge, length 20

Cartridge Ld Depth Cs5. Ld20-20 ge water aquatrex ld depth filter cartridge, length 20

Cartridge Ld Depth Cs12. Ld10-10 ge water aquatrex ld depth filter cartridge, length 10

Cartridge Ld Depth Cs5. Ld05-20 ge water aquatrex ld depth filter cartridge, length 20

Cartridge Ld Depth Cs5. Ld01-20 ge water aquatrex ld depth filter cartridge, length 20

Cartridge Ld Depth Cs10. Ld01-10 ge water aquatrex ld depth filter cartridge, length 10

Filter Selfseal Panel 15X20. In-145 self sealing filter eliminates bypass, moisture resistant, totally unitized assembly, fast, easy installation, no latches required, compact packaging, merv-6 and 7

Filter Selfseal Panel 25X25. In-125 self sealing filter eliminates bypass, moisture resistant, totally unitized assembly, fast, easy installation, no latches required, compact packaging, merv-6 and 7

Cartridge Filter Depth Cs20. Gx75-20 ge water hytrex depth filter cartridge, length 20

Cartridge Filter Depth Cs20. Gx50-20 ge water hytrex depth filter cartridge, length 20

Cartridge Filter Depth Cs40. Gx50-10 ge water hytrex depth filter cartridge, length 10

Cartridge Filter Depth Cs20. Gx30-40 ge water hytrex depth filter cartridge, length 40

Cartridge Filter Depth Cs20. Gx30-30 ge water hytrex depth filter cartridge, length 30

Cartridge Filter Depth Cs20. Gx30-20 ge water hytrex depth filter cartridge, length 20

Cartridge Filter Depth Cs40. Gx30-10 ge water hytrex depth filter cartridge, length 10

Cartridge Filter Depth Cs20. Gx20-40 ge water hytrex depth filter cartridge, length 40

Cartridge Filter Depth Cs20. Gx20-30 ge water hytrex depth filter cartridge, length 30

Cartridge Filter Depth Cs20. Gx20-20 ge water hytrex depth filter cartridge, length 20

Cartridge Filter Depth Cs40. Gx20-10 ge water hytrex depth filter cartridge, length 10

Cartridge Filter Depth Cs20. Gx10-30 ge water hytrex depth filter cartridge, length 30

Cartridge Filter Depth Cs20. Gx10-20 ge water hytrex depth filter cartridge, length 20

Cartridge Filter Depth Cs40. Gx10-10 ge water hytrex depth filter cartridge, length 10

Cartridge Filter Depth Cs20. Gx05-40 ge water hytrex depth filter cartridge, length 40

Cartridge Filter Depth Cs20. Gx05-30 ge water hytrex depth filter cartridge, length 30

Cartridge Filter Depth Cs20. Gx05-20 ge water hytrex depth filter cartridge, length 20

Cartridge Filter Depth Cs40. Gx05-10 ge water hytrex depth filter cartridge, length 10

Cartridge Filter Depth Cs20. Gx03-40 ge water hytrex depth filter cartridge, length 40

Cartridge Filter Depth Cs20. Gx03-30 ge water hytrex depth filter cartridge, length 30

Cartridge Filter Depth Cs20. Gx03-20 ge water hytrex depth filter cartridge, length 20

Cartridge Filter Depth Cs20. Gx01-40 ge water hytrex depth filter cartridge, length 40

Cartridge Filter Depth Cs20. Gx01-30 ge water hytrex depth filter cartridge, length 30

Cartridge Filter Depth Cs20. Gx01-20 ge water hytrex depth filter cartridge, length 20

Cartridge Filter Depth Cs40. Gx01-10 ge water hytrex depth filter cartridge, length 10

Filter String Wnd 25Un 10Ppdoe. String wound filter for process liquid applications.

Filter Plet Air Merv8 20X24X2. Dp40-Std-20X24X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 20X20X4. Dp40-Std-20X20X4 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 20X20X2. Dp40-Std-20X20X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 20X20X1. Dp40-Std-20X20X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X25X2. Dp40-Std-18X25X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X25X1. Dp40-Std-18X25X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X24X4. Dp40-Std-18X24X4 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X24X2. Dp40-Std-18X24X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X24X1. Dp40-Std-18X24X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 18X20X2. Dp40-Std-18X20X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X25X4. Dp40-Std-16X25X4 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X25X2. Dp40-Std-16X25X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X25X1. Dp40-Std-16X25X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X24X2. Dp40-Std-16X24X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X20X4. Dp40-Std-16X20X4 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X20X1. Dp40-Std-16X20X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X16X1. Dp40-Std-16X16X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 15X20X2. Dp40-Std-15X20X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 15X20X1. Dp40-Std-15X20X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 14X25X2. Dp40-Std-14X25X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 14X25X1. Dp40-Std-14X25X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 14X20X2. Dp40-Std-14X20X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 14X20X1. Dp40-Std-14X20X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X24X4. Dp40-Std-12X24X4 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X24X2. Dp40-Std-12X24X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X24X1. Dp40-Std-12X24X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X20X2. Dp40-Std-12X20X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 12X20X1. Dp40-Std-12X20X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 10X20X2. Dp40-Std-10X20X2 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 10X20X1. Dp40-Std-10X20X1 1in, 2in, 4in thickness, die cut beverage board frame, 100[perCent] synthetic media, 14.3 pleats per foot (2in), merv-8

Filter Plet Air Merv8 16X20X2. Dp1-201 1in, 2in, 4in thickness, classified u.l. class 1, non-flammable die cut board frame, ultrafine fiberglass media, 35[perCent]-40[perCent] efficiency, merv-8

EXP TI-REX 10-32 FTTNG/ADPTR W/FRIT PK10 - 15-24-05535

EXP TI-REX 10-32 FTTNG/ADAPTR W/FRIT PK2 - 15-24-05534

EXP TI-REX TUBE SET PEEKSIL .05X350 PK10 - 15-24-05533

EXP TI-REX TUBE SETPEEKSIL 0.15X150 PK2 - 15-24-05532

EXP TI-REX TUBE SET PEEKSIL 0.05X150 - 15-1500650-PS

EXP TI-REX TUBE SET PEEKSIL 0.025X250 - 15-1500550-PS

EXP TI-REX TUBE SET PEEKSIL 0.15X350 - 15-1500350-PS

EXP TI-REX TUBE SET PEEKSIL 0.15X250 - 15-1500250-PS

EXP TI-REX TUBE SETPEEKSIL 0.15X150 - 15-1500150-PS

EXP TI-REX TUBE SET PEEKSIL 0.1X650 - 15-1000650-PS

EXP TI-REX TUBE SET PEEKSIL 0.1X550 - 15-1000550-PS

EXP TI-REX TUBE SET PEEKSIL 0.075X650 - 15-1000350-PS

EXP TI-REX TUBE SET PEEKSIL 0.1X550 - 15-1000250-PS

EXP TI-REX TUBE SET PEEKSIL 0.05X550 - 15-1000150-PS

EXP TI-REX TUBE SET PEEKSIL 0.075X650 - 15-0750650-PS

EXP TI-REX TUBE SET PEEKSIL 0.075X550 - 15-0750550-PS

EXP TI-REX TUBE SET PEEKSIL 0.075X350 - 15-0750350-PS

EXP TI-REX 10-32 FITTING/ADAPTER W/FRIT - 15-0750250-PS

EXP TI-REX TUBE SET PEEKSIL 0.15X250 - 15-0750150-PS

EXP TI-REX TUBE SET PEEKSIL 0.1X650 - 15-0500650-PS

EXP TI-REX TUBE SET PEEKSIL 0.05X550 - 15-0500550-PS

EXP TI-REX TUBE SET PEEKSIL 0.05X350 - 15-0500350-PS

SOLVENT RESERVOIR FILTER 1/8 ID 10UM - 15-0500250-PS

EXP TI-REX TUBE SET PEEKSIL 0.05X150 - 15-0500150-PS

EXP TI-REX TUBE SET PEEKSIL 0.025X650 - 15-0250650-PS

EXP TI-REX TUBE SET PEEKSIL 0.025X550 - 15-0250550-PS

SOLVENT RESERVOIR FILTER 1/8 ID 2UM - 15-0250350-PS

EXP TI-REX TUBE SET PEEKSIL 0.025X250 - 15-0250250-PS

SOLVENT RESERVOIR FILTER 1/16 ID 10UM - 15-0250150-PS

EXP TI-REX TUBE SET PEEKSIL 0.15X350 PK5 - 10-04-05524

SOLVENT RESERVOIR FILTER 1/8 ID 10UM - 10-04-05523

SOLVENT RESERVOIR FILTER 1/8 ID 2UM PK5 - 10-04-05522

EXP TI-REX TUBE SET PEEKSIL 0.075X550 - 10-04-05521

SOLVENT RESERVOIR FILTER 1/16ID 10UM PK5 - 10-04-05519

SOLVENT RESERVOIR FILTER 1/16 ID 10UM - 10-04-05518

SOLVENT RESERVOIR FILTER 1/16 ID 2UM PK5 - 10-04-05517

SOLVENT RESERVOIR FILTER 1/16 ID 2UM - 10-04-05516

HYDROBLOKR F SLIP M SLIP 0.22UM PK25 - LEHYBK625

HYDROBLOKR F SLIP M SLIP 0.22UM PK100 - LEHYBK6100

HYDROBLOKR F SLIP M SLIP 0.22UM PK10 - LEHYBK610

HYDROBLOKR F SLIP M SLIP 0.8UM PK25 - LEHYBK525

HYDROBLOKR F SLIP M SLIP 0.8UMPK100 - LEHYBK5100

HYDROBLOKR F SLIP M SLIP 0.8UM PK10 - LEHYBK510

HYDROBLOKR 2X M SLIP 0.22UM PK25 - LEHYBK425

HYDROBLOKR 2X M SLIP 0.22UM PK100 - LEHYBK4100

HYDROBLOKR 2X M SLIP 0.22UM PK10 - LEHYBK410

HYDROBLOKR 2X M SLIP 0.8UM PK25 - LEHYBK325

HYDROBLOKR 2X M SLIP 0.8UM PK10 - LEHYBK3100

HYDROBLOKR 2X M SLIP 0.8UM PK10 - LEHYBK310

HYDROBLOKR F LUER M SLIP 0.22UM PK25 - LEHYBK225

HYDROBLOKR F LUER M SLIP 0.22UM PK100 - LEHYBK2100

HYDROBLOKR F LUER M SLIP 0.22UM PK10 - LEHYBK210

HYDROBLOKR F LUER M SLIP 0.8UM PK25 - LEHYBK125

HYDROBLOKR F LUER M SLIP 0.8UM PK100 - LEHYBK1100

HYDROBLOKR F LUER M SLIP 0.8UM PK10 - LEHYBK110

SYRINGE FIL TRUPOR PES 25MM 0.45UM PK100 - LEES20026

SYRINGE FIL TRUPOR PES 25MM 0.22UM PK100 - LEES20025

SYRINGE FILT TRUPOR NY 25MM 0.45UM PK100 - LEES20001

SYRINGE FILT TRUPOR NY 25MM 0.22UM PK100 - LEES20000

SYRINGE FILT A83 GF 30MM 0.5UM PK100 - LEES10803

SYRINGE FILT A83 GF 25MM 0.5UM PK100 - LEES10802

SYRINGE FILT A83 GF 15MM 0.5UM PK100 - LEES10801

SYRINGE FILT CA 25MM 1.0UM PK100 - LEES10752

SYRINGE FILT CA 15MM 1.0UM PK100 - LEES10751

SYRINGE FILT GF M DENS 25MM 2.7UM PK100 - LEES10707

SYRINGE FILT GF M DENS 25MM 1.7UM PK100 - LEES10706

SYRINGE FILT GF M DENS 25MM 1.5UM PK100 - LEES10705

SYRINGE FILT GF M DENS 25MM 1.2UM PK100 - LEES10704

SYRINGE FILT GF M DENS 25MM 1.0UM PK100 - LEES10703

SYRINGE FILT GF M DENS 25MM 0.7UM PK100 - LEES10702

SYRINGE FILT GF M DENS 25MM 0.5UM PK100 - LEES10701

SYRINGE FILT CA 4MM 0.45UM PK200 - LEES10612

SYRINGE FILT CA 4MM 0.22UM PK200 - LEES10611

SYRINGE FILT PES 4MM 0.45UM PK200 - LEES10610

SYRINGE FILT PES 4MM 0.22UM PK200 - LEES10609

SYRINGE FILT PVDF 4MM 0.45UM PK200 - LEES10608

SYRINGE FILT PVDF 4MM 0.22UM PK200 - LEES10607

SYRINGE FILT PTFE HPHIL 4MM 0.45UM PK200 - LEES10606

SYRINGE FILT PTFE HPHIL 4MM 0.22UM PK200 - LEES10605

SYRINGE FILT PTFE HPHOB 4MM 0.45UM PK200 - LEES10604

SYRINGE FILT PTFE HPHOB 4MM 0.22UM PK200 - LEES10603

SYRINGE FILT NYLON 4MM 0.45UM PK200 - LEES10602

SYRINGE FILT NYLON 4MM 0.22UM PK200 - LEES10601

FILTER INLINE PTFE STER 50MM 0.45UM PK10 - LEES10502

FILTER INLINE PTFE STER 50MM 0.22UM PK10 - LEES10500

SYRINGE FILT PTFE PP GF 25MM 0.22 PK100 - LEES10411

SYRINGE FILT PTFE PP GF 25MM 0.45 PK100 - LEES10410

SYRINGE FILT PVDF PP GF 25MM 0.22 PK100 - LEES10406

SYRINGE FILT NY/PP/GF 25MM 0.22UM PK100 - LEES10401

SYRINGE FILT NY/PP/GF 25MM 0.45UM PK100 - LEES10400

SYRINGE FILT PVDF 30MM 0.45UM PK100 - LEES10333

SYRINGE FILT PVDF 30MM 0.22UM PK100 - LEES10332

SYRINGE FILT PVDF 17MM 0.45UM PK100 - LEES10331

SYRINGE FILT PVDF 17MM 0.22UM PK100 - LEES10330

SYRINGE FILT PTFE 30MM 0.45UM PK100 - LEES10323

SYRINGE FILT PTFE 30MM 0.22UM PK100 - LEES10322

SYRINGE FILT PTFE 17MM 0.45UM PK100 - LEES10321

SYRINGE FILT PTFE 17MM 0.22UM PK100 - LEES10320

SYRINGE FILT PES 30MM 0.45UM PK100 - LEES10313

SYRINGE FILT PES 30MM 0.22UM PK100 - LEES10312

SYRINGE FILT PES 17MM 0.45UM PK100 - LEES10311

SYRINGE FILT PES 17MM 0.22UM PK100 - LEES10310

SYRINGE FILT NY 30MM 0.45UM PK100 - LEES10303

SYRINGE FILT NY 30MM 0.22UM PK100 - LEES10302

SYRINGE FILT NY 17MM 0.45UM PK100 - LEES10301

SYRINGE FILT NY 17MM 0.22UM PK100 - LEES10300

SYRINGE FILT NY GF 25MM 0.45UM PK100 - LEES10235

SYRINGE FILT NY GF 25MM 0.22UM PK100 - LEES10234

SYRINGE FILT NY GF13MM 0.45UM PK100 - LEES10233

SYRINGE FILT NY GF 13MM 0.22UM PK100 - LEES10232

SYRINGE FILT PVDF GF25MM 0.45UM PK100 - LEES10222

SYRINGE FILT PVDF GF25MM 0.22UM PK100 - LEES10221

SYRINGE FILT PVDF GF13MM 0.45UM PK100 - LEES10220

SYRINGE FILT PVDF GF 13MM 0.22UM PK100 - LEES10219

SYRINGE FILT PES GF 25MM 0.45UM PK100 - LEES10209

SYRINGE FILT PES GF 25MM 0.22UM PK100 - LEES10208

SYRINGE FILT PES GF13MM 0.45UM PK100 - LEES10207

SYRINGE FILT PES GF 13MM 0.22UM PK100 - LEES10206

SYRINGE FILT PTFE GF25MM 0.45UM PK100 - LEES10196

SYRINGE FILT PTFE GF25MM 0.22UM PK100 - LEES10195

SYRINGE FILT PTFE GF13MM 0.45UM PK100 - LEES10194

SYRINGE FILT PTFE GF 13MM 0.22UM PK100 - LEES10193

SYRINGE FILT PP 25MM 0.45UM PK100 - LEES10131

SYRINGE FILT PP 25MM 0.22UM PK100 - LEES10130

SYRINGE FILT PP 13MM 0.45UM PK100 - LEES10129

SYRINGE FILT PP 13MM 0.22UM PK100 - LEES10128

SYRINGE FILT GF 25MM 0.45UM PK100 - LEES10118

SYRINGE FILT GF 25MM 0.22UM PK100 - LEES10117

SYRINGE FILT GF 13MM 0.45UM PK100 - LEES10116

SYRINGE FILT GF 13MM 0.22UM PK100 - LEES10115

SYRINGE FILT MCE 25MM 0.45UM PK100 - LEES10101

SYRINGE FILT MCE 25MM 0.22UM PK100 - LEES10100

SYRINGE FILT MCE 13MM 0.45UM PK100 - LEES10099

SYRINGE FILT MCE 13MM 0.22UM PK100 - LEES10098

SYRINGE FILT CA 25MM 0.45UM PK100 - LEES10084

SYRINGE FILT CA 25MM 0.22UM PK100 - LEES10083

SYRINGE FILT CA 13MM 0.45UM PK100 - LEES10082

SYRINGE FILT CA 13MM 0.22UM PK100 - LEES10081

SYRINGE FILT PES 25MM 0.45UM PK100 - LEES10067

SYRINGE FILT PES 25MM 0.22UM PK100 - LEES10066

SYRINGE FILT PES 13MM 0.45UM PK100 - LEES10065

SYRINGE FILT PES 13MM 0.22UM PK100 - LEES10064

SYRINGE FILT PVDF 25MM 0.45UM PK100 - LEES10050

SYRINGE FILT PVDF 25MM 0.22UM PK100 - LEES10049

SYRINGE FILT PVDF 13MM 0.45UM PK100 - LEES10048

SYRINGE FILT PVDF 13MM 0.22UM PK100 - LEES10047

SYRINGE FILT PTFE HPY25MM 0.45UM PK100 - LEES10037

SYRINGE FILT PTFE HPY25MM 0.22UM PK100 - LEES10036

SYRINGE FILT PTFE HPY13MM 0.45UM PK100 - LEES10035

SYRINGE FILT PTFE HPY 13MM 0.22UM PK100 - LEES10034

SYRINGE FILT PTFE HPO25MM 0.45UM PK100 - LEES10020

SYRINGE FILT PTFE HPO25MM 0.22UM PK100 - LEES10019

SYRINGE FILT PTFE HPO13MM 0.45UM PK100 - LEES10018

SYRINGE FILT PTFE HPO 13MM 0.22UM PK100 - LEES10017

SYRINGE FILT NYLON 25MM 0.45UM PK100 - LEES10003

SYRINGE FILT NYLON 25MM 0.22UM PK100 - LEES10002

SYRINGE FILT NYLON 13MM 0.45UM PK100 - LEES10001

SYRINGE FILT NYLON 13MM 0.22UM PK100 - LEES10000

THIMBLE GL. FIBER G400 26X60MM PK25 - FT-1204-026060

THIMBLE CELLULOSE C300 33X100MM PK25 - FT-1201-033100

THIMBLE CELLULOSE C300 30X100MM PK25 - FT-1201-030100

THIMBLE CELLULOSE C300 28X100MM PK25 - FT-1201-028100

FILTER SS HOLDER 293MM TC - 16277

FILTER SS HOLDER 142MM TC - 16276

FILTER SS HOLDER 142MM - 16275

FILTER SS HOLDER 142MM 2000ML - 16274

ALUMINUM CLAMP ANODIZED 47MM PK1 - 81595

ORING SILICON 47MM INLINEFILTER HOLD PK5 - 86366N

GASKET PTFE INLET/OUTLET PK2 - 72204N

O-RING POLYFLOW G 0.2UM 222/VITON 10IN - PG-10310-002-4

FILTER CARTRIDGE POLYFLOWG 10UMEPDM 10IN - PG-10010-100-12

WASTE DRAIN ADAPTOR RETAINER - 5028-N

PRESSURE VESSEL SS 18.9L (5GAL) - 97134

PRESSURE VESSEL SS 11.3L (3GAL) - 97133

PRESSURE VESSEL SS 3.78L (1GAL) - 97132

Accessories for MicroFunnelâ„¢ ST Disposable Filter Funnels, Pall Laboratory - 4863, Second Generation Vacuum Pump Adapter for MicroFunnelâ„¢ Filter Funnel for Alternate pump

CAPSULE W/HDC II 4.5UM 14MM HORSE BARB - KA3J045P6, Kleenpak™ capsules with HDC® II membrane, 14 mm hose barb

Accessories for Whatmanâ„¢ MV050 Vacuum Filtration Apparatus, Whatman products (Cytiva) - 10440006, O-Ring, silicone for lid, for MV050/0; MV050A/0

MS DISPENSER MEMBRANES 0.45UM PVDF PK300 - 28006Z47SCM

Accessories for Microsart® 100/250 Funnels, Disposable, Sartorius - 1ZU0001, Replacement frit, stainless steel, for Microsart® funnels

LIDS FOR MICROSART ADDFILTER00 PK100 - 1ZSFK0007

PEDAL SWITCH FOR MICROSART E.MOTION - 1ZE0028

SILICONE TUBING PRESSURE-SIDED 10 M - 1ZAS0020

SILICONE TUBING PRESSURE-SIDED 2 M - 1ZAS0019

VACUUM HOSE W/ QUICK CON.SILICONE1M - 1ZAS0016

Silicone Tubing for Microsart Membrane Pumps, Pressure-Sided, Sartorius - 1ZAS0007, Tubing, silicone, for pressure-sided connection to Microsart® e.jet fluid pump

Accessories for Vacuum Filtration Manifold, Sartorius - 1ZA0006, Quick connection coupling, silicone, int.Ø DN 10, out.Ø DN 20, wall thickness 5 mm

ADJ MICROSART MINI.VAC PRESSURE - 1EV0003

FINE ADJ HEAD MICROSART MAXI.VAC - 1EV0002

FINE ADJ HEAD MICROSART MINI.VAC - 1EV0001

SOUND ABSORBER FOR MICROSART MAXI.VAC - 1EH0002

SOUND ABSORBER FOR MICROSART MINI.VAC - 1EH0001

POWER SUPPLY FOR MICROSART E.JET - 1EE0012

REPLACEMENT KIT FOR MICROSART MAXI.VAC - 1ED0055

REPLACEMENT KIT FOR MICROSART MINI.VAC - 1ED0054

MICROSART E.JET QUICK CONN. POM PSU PK2 - 1EAS0027

Accessories for Filtering Flasks, Sartorius - 1EAS0019, Stopper for 5 L suction flask, diameter 75 mm

OUTLET TUBE (FOR 80L) - 1EAQ0017

THREADED FITTING FOR 166MP-3 - 1EAF0020

ASSEMBLING KIT FOR HOSE BARB OF 16672-1 - 1EA0018

STOPPER FOR 1 L SUCTION FLASK - 17004

ADAPTER 16511 ON MICROSART MANIFOLDS - 168ZAD0001

DOUBLE COUPLING CONNECTION MANIFOLDS - 168ZAC0001

FILTER SUPPORT 47 50MM MICROS. MANIFOLDS - 168ZAB0001

FILTER SUPPORT 47MM MICROSART MANIFOLDS - 168ZAA0001

QUICK CONNECT. COUPLING F. TUBING - 168SPB0001

BLIND CAP FOR MICROSART MANIFOLD - 168SPA0001

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M6SS500, 6 branch Manifold with 500 ml stainless steel funnel, interconnactable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M6SS100, 6 branch Manifold with 100 ml stainless steel funnel, interconnactable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M6MS, 6 branch Manifold for Microsart® consumables, interconnectable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M6BS250, 6 branch Manifold for Biosart® 250 funnels (47 and 50 mm filter), interconnectable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M6BS100, 6 branch Manifold for Biosart® 100, interconnectable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M3SS500, 3 branch Manifold with 500 ml stainless steel funnel, interconnactable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M3SS100, 3 branch Manifold with 100 ml stainless steel funnel, interconnactable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M3MS, 3 branch Manifold for Microsart® consumables, interconnectable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M3BS250, 3 branch Manifold for Biosart® 250 funnels (47 and 50 mm filter), interconnectable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M3BS100, 3 branch Manifold for Biosart® 100, interconnectable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M2MS, 2 branch Manifold for Microsart® consumables, interconnectable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M2BS100, 2 branch Manifold for Biosart® 100, interconnectable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M1SS500, 1 branch Manifold with 500 ml stainless steel funnel, interconnactable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M1SS100, 1 branch Manifold with 100 ml stainless steel funnel, interconnactable

Microsart® Vacuum Filtration Manifolds, Sartorius - 168M1MS, 1 branch Manifold for Microsart® consumables, interconnectable

Microsart® e.motion Membrane Dispenser for Microbiological Filtration, Sartorius - 16713BO, Microsart® e.motion dispenser with integrated battery and power supply

FILTRATION ASSEMBY 5L FUNNEL 1L - 5350033

VACUUM BORO GLASS FILTRATION ASSEMBLY 2L - 5350030

VACUUM BORO GLASS FILTRATION ASSEMBLY 1L - 5350029

Accessories for Whatmanâ„¢ Pressure Filtration Devices, Whatman products (Cytiva) - 10453007, MD 050/0/12MV050, Pressure filtration connection via rapid seal coupling, for SV 003 b and SV 003 c, for stainless steel pressure filtration devices of the MD 050 and MD 142/5 series

Accessories for Whatman™ Pressure Filtration Devices, Whatman products (Cytiva) - 10453001, MD 050/0/18, Pressure filtration connection via olive Ext. Ø 9 to 11 mm, for pressure hoses, for stainless steel Pressure filtration devices of the MD 050 and MD 142/5 series

Sterisart® NF Sterility Test Systems, Sartorius - 16477GBD, 120 ml, Sterisart® NF gamma, Long individual needle for closed plastic containers, gamma-sterilized

Accessories for Sterisart® NF Sterility Test System, Sartorius - 1ZW---0002, Ampoule breaker

BOW STAINLESS STEEL FOR PUMP - 1ZS---0005

Fittings for AirPort MD8 (Sartorius) - 1ZPX-D0002, Covers for BACTairâ„¢ culture media plates

DRAINING CONTAINER PUMP - 1ZG---0028

COVER F/CONTAINER DRAINING STERILITY UNT - 1ZG---0024

ADAPTER DRAINING CONTAINER MILIPORE PUMP - 1ZG---0014

ADAPTER FOR PUMPS - 1ZG---0012

COVER DRAINING CONTAINER - 1ZG---0011

CLAMP FOR CONTROL UNIT - 1ZF---0014

INSTALLATION KIT ISOLATORS NEW - 1ZE---0050

Accessories for Sterisart® NF Sterility Test System, Sartorius - 1ZE---0035, Serial cable

Accessories for Sterisart® NF Sterility Test System, Sartorius - 1ZE---0034, RJ45 cable

FOOT SWITCH FOR UNIVERSAL PUMP - 1ZE---0033

ADAPTER FOR SYMBIO PUMP - 1ZA---0028

Accessories for Sterisart® NF Sterility Test System, Sartorius - 1ZA---0002, Drain tubing

Accessories for Sterisart® NF Sterility Test System, Sartorius - 1EE---0010, External barcode scanner

Fittings for AirPort MD8 (Sartorius) - 17801---001, Adapter for gelatine filter disposables, stainless steel

CONNECTOR S-F TRI CLAMP HOSE-HOLDER AL - 17659---003

Accessories for Sterisart® NF Sterility Test System, Sartorius - 16964-----3, Inlet needle (short) for testing infusion solutions in bottles

SAMPLING HEAD FOR ACTIVE AIR MONITORING - 16746-01--SHB

EXTENSION CABLE SAMPLING HEAD 30M - 16746-01--EXC

Accessories for Vacuum Filter Holders, Sartorius - 6985060, Glass cylinder, 130 ml

Accessories for Vacuum Filter Holders, Sartorius - 6980591, Aluminium closing cap, anodized

Accessories for Vacuum Filter Holders, Sartorius - 6980589, Glass cylinder, 85 ml

Accessories for Vacuum Filter Holders, Sartorius - 6980588, Plug, polypropylene

Accessories for Vacuum Filter Holders, Sartorius - 6980586, PP base

Accessories for Vacuum Filter Holders, Sartorius - 6980574, Silicone O-ring, 40.5×3.5 mm

Accessories for Vacuum Filter Holders, Sartorius - 6980573, Flat silicone gasket

Fittings for AirPort MD8 (Sartorius) - 17661, End cap for aluminium adapter

Tube Connector for Combisart® Manifolds, Sartorius - 17204, Tube connector

Accessories for Sterisart® NF Sterility Test System, Sartorius - 16975, Incubation rack

AMPOULE BREAKER - 16969

Accessories for Sterisart® NF Sterility Test System, Sartorius - 16968, Silicone adapter

Accessories for Sterisart® NF Sterility Test System, Sartorius - 16967, Filling cap with filling needle

Accessories for Sterisart® NF Sterility Test System, Sartorius - 16966, T-distributor for 2 filter holders

X-DISTRIBUTOR PIECE 3 HOLDERS - 16965

Accessories for Sterisart® NF Sterility Test System, Sartorius - 16964, Stainless steel inlet needle (long) for testing infusion solutions in bottles

Vacuum Filter Holders, Sartorius - 16523, 130 ml

Vacuum Filter Holders, Sartorius - 16522, 85 ml

CLOSURE CLAMP MD142 UNIT - 10451414

Presstonâ„¢ 1000 Positive Pressure Manifold 96-Well Plate, Agela Technologies - AH1-7033, Presstonâ„¢ 1000 positive pressure manifold for 96-well plates

Filter, Amber, LED Transilluminator, Triple Wavelength.

Tube holder platform for Mini Mixer, Size: 50 ml tube.

SWITCH VT60 BY-PASS - L01787300

Filter Bag, Nilfisk Advanced America - 140 7313 020, High filtration paper bag, 10/pk

Filters for Vacuum Cleaners, Nilfisk Advanced America - 140 1515 500, Filter Main Foam

CABINET LETTER SIZE VERTICAL BLACK26.5IN - 495795

MUFF KIT - 22344600

Sporlan Drier Core, Gustave A Larson Co - RCW-100, Drier Core

MEDIUM PARKER ZANDER STAINLESS STEEL 25U - 90PDSR25-07/25

VISIFILTER REPLC A93 F/SODR-X-TRACTOR - 1309-0028-P1

Filter Bag, Jensen Tools - 90146-00-2, Replacement filter bags

Filters for Vacuum Cleaners, Nilfisk Advanced America - 147 1099 500, Sack Filter

Filters for Vacuum Cleaners, Nilfisk Advanced America - 147 1089 500, Exhaust Filter

FILTER PRIMARY SX SODR-X-TRACTOR - 1309-0018-P50

X-Fine Strainer 3000, Klinger Paint - C1091120-BAN, X-Fine Strainer #3000

FILTER STERILIZING AIR W/ SS CAGE 0.01UM - ST09T/SI

Hi-Tek Depth Filter, H2O Filter Warehouse - HTDF-50-0988-A, 48/Case, Hi-Tek depth filter for use with 9 3/4 IN., 9 7/8 IN. and 10 IN. housings, brown, 50 µm

FINGER TUBE REPLACEMENT FILTER VT SERIES - L01783800

FILTER VESSEL HOUSING 150PSI 3/4IN 20IN - 9440-1098

O-RING POLYFLOW 10UM 213 INTL EP 10INCH - 22-10H10-100-1

O-RING GLASTECH II 0.5U 226/FIN SIL 20IN - 28-19720-005-2

Filter Bag, Chemco - 86184-TK, Filter bag with 60 - 1 IN. pleats

Sanitary Gasket Clamps, Garlock Hygienic Technologies - 42MPE-050, Gasket, 1/2 IN.

Sanitary Gasket Clamps, Garlock Hygienic Technologies - 40MPSFY-400, Gasket, 4 IN.

FILTER PENTEK 20IN FOR BIG BLUE HOUSINGS - 255494-43

O-RING 150134 HOUSING 3/4IN INLET/OUTLET - 151120

Replacement Tubing/Hose for Burettes, Latex, Size: 8cm (3.15in).

Aluminum Clamp. 47Mm

300Ml Funnel. Glass Base, Clamp, Silicone Stopper #8

Air Sampling Manifolds, Ace Glass Incorporated - 7488-35-48-6, Air Sampling Manifold, with Sampling Port(s)

Air Sampling Manifolds, Ace Glass Incorporated - 7488-15-48-10, Air Sampling Manifold, with Sampling Port(s)

Accessories for Instatherm® Filtration Apparatus, Ace Glass - 3704-06, Snap Ring Support for Filter Funnel Adapter, 47mm

Accessories for Instatherm® Filtration Apparatus, Ace Glass - 3704-05, Filter Funnel Adapter, #25 to #50

FILTER, IMMERSION, HDPE, 125MM, 1/PKG, 12/CASE. For filtration involving recovery of solids without having to transfer material to funnels. High density polyethylene coarse porosity disc and body. Use directly or precoat for fine filtration. Larger filter has a serrated tubing connector.

Bubble Point Test Apparatus. Test the bubble point of 50-, 75- and 90-mm NALGENE filter unit membranes without removing the membrane from the filter unit. Testing the bubble point helps assure product integrity. Can test all 50-, 75- and 90-mm-diameter NALGENE 0.2--m and 0.45--m disp.

Synthware Buchner Filter Funnels, Inner [ST] Joint, Kemtech America - F366024M, 150 ml

Nalgene Three-Way Stopcock, Polypropylene With Teflon Resin Tfe Plug, Thermo Scientific. Tabulated outlets are arranged in a T shape and accepts -+ in. through 5/16in tubing, non-seizing, leakproof plug, auotclavable.

Nalgene Stopcocks, Polypropylene With Teflon Resin Tfe Plug, Thermo Scientific. Serrated tabulation on each end accepts -+ in through 5/16 in. tubing, reliable and accurate flow control for liquid handling systems with no seizing, auotclavable

Nalgene Stopcocks, Polypropylene With Teflon Resin Tfe Plug, Thermo Scientific. Serrated tabulation on each end accepts -+ in through 5/16 in. tubing, reliable and accurate flow control for liquid handling systems with no seizing, auotclavable

Diaphragm. For Sonic Sifter Separator (57334-035).

Sieve, Teflon PFA. Mesh size: 1.0mm. For use with containers having a 7.62cm or larger opening and capacities ranging from 300 to 1000ml. Diameter of sieve: 6.4cm. Sieve hooks over containers for draining and drying. Resistant to virtually all chemical attack.

Spartan-13 Disposable HPLC Syringe Filter. 0.45um pore. 13mm diameter. Low hold-up volume for minimal loss in the 1-10ml range. Regenerated cellulose membrane. Low extractables. Chemically resistant. Mini tip. Solvent resistant polypropylene housing. Luer lock connections. 4.57cm2 filtration area.

Kimwipe Dispenser. Dispenser, Large, Clear acrylic holders fit packages of small or large lab wipes. Mount on a shelf or wall

Kimwipe Dispenser. Dispenser, Small, Clear acrylic holders fit packages of small or large lab wipes. Mount on a shelf or wall

Pressure Vessel, Heavy Wall. Complete Round Bottom Apparatus. Volume: 150mL. O.D.xOverall Length: 63.5x117mm. Internal thread for use with a 25mm fluoropolymer resin bushing as a pressure seal. Supplied with vessel, bushing, and Viton O-ring.

FUNNEL STAND WOOD DOUBLE EA - CH0689B

FUNNEL AND BURETTE STAND COMBO - CH0690

FUNNEL STAND WOOD SINGLE EA - CH0689A

Buchner Funnel Pp With Pvc Lid 70Mm. Buchner Funnel, These Polypropylene Buchner Funnels Are Two-Piece, Light-Weight, And Easy-To-Clean. They Are Fully Autoclavable. The Top Portion Snaps Into The Bottom Forming A Vacuum Tight Seal. This Funnel Has An Opening With A Diameter Of 70 Mm.

Buchner Funnel 100Mm/Opening 30Mm Cs5. Buchner Funnel, These Porcelain Funnels Have Stable Mechanical Strength And Little Permeability, When Properly Used, The Glazed Pieces Can Withstand Temperatures Of 1050deg C And The Pieces 1350 Deg C, This Funnel Has A 100Mm Diameter Opening And 30Mm Dia Tube

Buchner Funnel Light 80Mm And 22Mm Cs5. Buchner Funnel, Porcelain Buchner Funnels Have Stable Mechanical Strength And Little Permeability. When Properly Used, The Glazed Pieces Can Withstand Temperatures Of 1050 deg C And The Pieces 1350 Deg C, Has An 80Mm Diameter Opening And A 22Mm Diameter Tube.

Buchner Funnel Polypropylene 125Mm. Buchner Funnel, These Polypropylene Buchner Funnels Are Two-Piece, Light-Weight, And Easy-To-Clean. They Are Fully Autoclavable. The Top Portion Snaps Into The Bottom Forming A Vacuum Tight Seal. This Funnel Has An Opening With A Diameter Of 125Mm.

Buchner Funnel Polypropylene 100Mm Dia. Buchner Funnel, These Polypropylene Buchner Funnels Are Two-Piece, Light-Weight, And Easy-To-Clean. They Are Fully Autoclavable. The Top Portion Snaps Into The Bottom Forming A Vacuum Tight Seal. This Funnel Has An Opening With A Diameter Of 100Mm.

CARBON FILTER WATERWISE 3200 PK/6 - 8606, Carbon filter

Funnel Support - CH0689D, Funnel Support, Length 16 IN.

Funnel Support - H-21650, Funnel Support, Length 16 IN.

Funnel Support with Base - CH0689C, Funnel Support with Base

DISC BUCHNER 110M CS50. HDPE Disc with mesh size of 950x700 microns. Holds up filter paper of size 110mm and prevents blockage of holes. Excellent chemical resistance. Good to 120C.

FILTFUN SUPPORT SCREEN 47MM SS - 81312

UNDERDRAIN DISC SS F1209 - 79792

Support screen, type 316 stainless steel, For 293 mm Disc Filter Holder.

VWR Grade 315, Crepe Fluted Circles, Folded, Qualitative. 18.5cm diameter. Ideal for gelatinous and coarse precipitates. Coarse porosity. Fast flow rate. 25um particle retention.

FILTER SAMPLER Blood Serum Filters. 1.3 diameterx10.2Lcm. Disposable. For filtering fibrin and separating serum and plasma from centrifuged whole blood specimens in standard 16, 13, or 10.25mm ID evacuated blood collection tubes. Reduces second centrifugations and sample preparation time.

FILTER SAMPLER Blood Serum Filters. 1.6 diameterx15.2Lcm. Disposable. For filtering fibrin and separating serum and plasma from centrifuged whole blood specimens in standard 16, 13, or 10.25mm ID evacuated blood collection tubes. Reduces second centrifugations and sample preparation time.

Filter Support Plate. 9cm diameter. Designed for use with Whatman glass microfiber filters and filter funnels. Polypropylene.

Filter Funnels, Three-Piece. 9cm filter diameter. 200ml volume. Designed for use with Whatman glass microfiber filters. Reservoir, base and stem are borosilicate glass with ground contact flanges. With three leakproof, plastic-coated clamps and transparent acrylic support plate. 17.9cm high.

3-Piece Filter Funnels, 7.0 cm. Reservoir (approx.):210 mL. Effective Filtration Dia.:5.0 cm. Effective Filteration Area:19.6 cm2. Filter Support Plate Dia.:7.0 cm. Filter Funnel Height:20.8 cm

Filter Funnels, Three-Piece. 7cm filter diameter. 115ml volume. Designed for use with Whatman glass microfiber filters. Reservoir, base and stem are borosilicate glass with ground contact flanges. With three leakproof, plastic-coated clamps and transparent acrylic support plate. 15.9cm high.

Reusable Bottle-Top Filter, PSF (Fits 45 mm neck), non sterile. The convenience of a bottle top filter with the cost savings of a reusable filter housing. Screw securely onto glass media bottles with 33- or 45-mm neck sizes.

CultureGard Filters, 12/box. CultureGard Media Feed Protection Filter for Continuous Perfusion Cultures. 2.5 cm2, 0.2 um. The CultureGard line of 0.2 um hollow fiber filters are designed to reduce the risk of contamination to continuous perfusion cultures.

Pressure vessel replacement parts kit includes pressure gauge and safety relief valve, All necessary connections. Stainless Steel Pressure Vessels (PN 15203, 15207, and 15220).

Stainless Steel Disc Filter Holders, 293 mm. Convenient sizes and durable materials for filtration of all your laboratory samples. Design optimizes use of filter area with 15% more EFA than most competitive units, giving higher flow rates and extending the filter's service life.

Stainless Steel Disc Filter Holder, 142 mm. Convenient sizes and durable materials for filtration of all your laboratory samples. Design optimizes use of filter area with 15% more EFA than most competitive units, giving higher flow rates and extending the filter's service life.

Replacement Support Screen. Type 316 stainless steel. For 25mm In-Line Stainless Steel Filter Holder (28144-200).

Parabola Stainless Steel Filter Funnel, 47mm. 1L capacity. Made of highly polished Type 316 stainless steel. Opens and closes with quarter turn. Seals without O-rings. Autoclavable. Accepts 47mm diameter membrane or glass fiber filter. Inserts into standard rubber stopper. 15.2diameterx22.2Lcm.

25 mm Polysulfone Filter Funnels, 200 mL capacity. Economical, autoclavable funnels for vacuum filtration. Transparent funnels with graduations permit easy visual measurement. Less expensive than stainless steel and more durable than glass. Tapered stem fits standard-size stoppers.

25 mm Polysulfone Filter Funnels, 50 mL capacity. Economical, autoclavable funnels for vacuum filtration. Transparent funnels with graduations permit easy visual measurement. Less expensive than stainless steel and more durable than glass. Tapered stem fits standard-size stoppers.

Pressure Filtration Funnel, 47mm. Rapid batch filtration. Stainless steel. 13.8bar maximum pressure for rapid, high-pressure filtration. 200mL funnel capacity. 9.6cm2 effective filtration area. 3.2mm-27 FNPT pipe thread. Autoclavable.

Seal Kit. Kit includes five PTFE gaskets, ten Viton O-rings, and one stainless-steel hose barb adapter for 6.4mm ID tubing. For 47mm Pressure Filtration Funnel (28144-652).

Replacement Support Screen. For 25mm Polysulfone Filter Funnels (28144-700, -754).

Replacement Support Screen. Polyphenylsulfone screen for the 47mm In-Line Polycarbonate Filter Holder (28144-257) and the 47mm Magnetic Filter Funnels (28143-546, -548, -550, 28150-496).

Underdrain disc, Type 316 stainless steel, 47mm In-line Filter Holder. High quality, corrosion-resistant holders for stack sampling. Stainless steel construction offers excellent chemical resistance. Holder opens and closes easily. Filter remains undisturbed for particulate analysis.

In-Line Filter Holder, Stainless Steel, 47mm. 9.6cm2 filtration area. 200psi maximum pressure. 93[degree]C maximum temperature. Upstream threaded vent. PTFE thrust ring. Viton O-ring. Polyethylene hose barb adapters. 9.5mm FNPT inlet/outlet. 6.4mm ID tubing. Autoclavable. 5.7diameter x 16.2Lcm.

MANIFOLD ORING KIT FOR VALVES - 88160

47 mm support screen, type 316 stainless steel, For 47mm In-line Filter Holder. High quality, corrosion-resistant holders for stack sampling. Stainless steel construction offers excellent chemical resistance. Holder opens and closes easily. Filter remains undisturbed for particulate analysis.

47 mm Aluminium In-line Filter Holder. Lightweight, anodized aluminium filter holder. Convenient. In-line opening and closing capability saves time. Filter remains intact for particulate analysis.

In-Line Delrin Filter Holder, 25mm. Delrin plastic with Type 316 stainless steel support screen. Viton O-ring. Nylon hose barb adapters. Autoclavable. Accepts 25mm diameter membrane/filter fiber. Threaded connections 3.2mm FNPT. Accepts 6.4mm ID tubing. 40psi in liquid. 20psi, 85[degree]C in air.

Stainless Steel In-line Filter Holder, 25 mm Holder. High quality, corrosion-resistant holders for stack sampling. Stainless steel construction offers excellent chemical resistance. Holder opens and closes easily. Filter remains undisturbed for particulate analysis.

13 mm Plastic Swinney Filter Holder. Reusable holder compatible with abroad range of chemicals. Economical for small volume (1 to 10 mL) filtration. Accepts 13 mm filter discs. Luer inlet and outlet fittings provide easy connections.

Easy-Pressure Syringe Filter Holder, 25mm. Delrin plastic with Type 316 stainless steel membrane support screen. Viton O-ring. Inlet/outlet seal plugs included. Autoclavable. Accepts 25mm diameter membrane filters, 20mm prefilters. Fits any standard syringe with luer-type fittings. 3.5dia.x2.7Lcm.

Test Kit. 50 tests for use with Acro 50 Vent Filter with Emflon II Membrane (28143-838).

Hose assembly kit includes clamp and PTFE gasket, type 316 stainless steel inlet/outlet adapter, 3.8 cm (1.5 in.) sanitary to 9.5 mm (3/8 in.) hose barb.

47mm Filtration Assemblies, Components, Glass Base, [standard taper] 40/35 joint, for S.S. Support. 47mm Filtration Assembly With [standard taper] 40/35 Connection, For Stainless Steel Support.

47mm Filtration Assemblies, Components, Support Screen Gasket. 47mm Filtration Assemblies With GL 45 Thread Connection, With Stainless Steel Support. This unit is designed for filtering viscous or proteinaceous solutions or to produce ultraclean filtrate.

47mm Filtration Assemblies, Components, Glass Base, for S.S. Support. 47mm Filtration Assemblies With No. 8 Stopper Connection, With Stainless Steel Support. This unit is designed for filtering viscous or proteinaceous solutions or to produce ultraclean filtrate.

25mm Filtration Assemblies, Components, Support Screen Gasket, PTFE. 25mm Filtration Assemblies with No. 5 Stopper Connections, With Stainless Steel Support. This unit is designed for filtering viscous or proteinaceous solutions or to produce ultraclean filtrate.

25mm Filtration Assemblies, Components, Stainless Steel Support Screen. 25mm Filtration Assemblies with No. 5 Stopper Connections, With Stainless Steel Support. This unit is designed for filtering viscous or proteinaceous solutions or to produce ultraclean filtrate.

25mm Filtration Assemblies, Components, Silicone Stopper, No. 5. 25mm Filtration Assemblies with No. 5 Stopper Connections, With Stainless Steel Support. This unit is designed for filtering viscous or proteinaceous solutions or to produce ultraclean filtrate.

25mm Filtration Assemblies, Components, Aluminum Clamp. 25mm Filtration Assemblies with No. 5 Stopper Connections, With Stainless Steel Support. This unit is designed for filtering viscous or proteinaceous solutions or to produce ultraclean filtrate.

25mm Filtration Assemblies, Components, Glass Base. 25mm Filtration Assemblies with No. 5 Stopper Connections, With Stainless Steel Support. This unit is designed for filtering viscous or proteinaceous solutions or to produce ultraclean filtrate.

25mm Filtration Assemblies, Components, Fritted Support Base. 25mm Filtration Assemblies with No. 5 Stopper Connections, With Fritted Glass Support. This unit is recommended for general filtration.

Fritted Support Base. 40-60um fritted glass support base is compatible with the VWR 47mm Filter Holder with 40/35 Standard Taper Joint Connection.

Fritted Support Base. Fritted glass support base is for use with the VWR 47mm Filter Holder. 40 to 60um porosity.

Silicone Stopper. Number 5 silicone stopper is for use with the VWR 25mm Filter Holder.

Glass Base for Stainless Steel Support. Base is for use with the VWR 25mm Filter Holder.

Glass Funnel. 15mL graduated funnel is for use with the VWR 25mm Filter Holder.

Replacement Clamp With Collar. Replacement clamp with cork grip and reinforcement collar for Pall Life Science Laboratory Shakers PNs 4821, 4822.

Filter, Inlet, Bottom-of-the-Bottle, 10um Porosity. For 1/8 inch OD tubing

VALVE, PE, CHECK, 5/16-1/4, 12/PKG, 72/CASE. These polyethylene check valves operate positively and instantly in any position. Arrows indicate direction of free flow. Neoprene disk, no metal. 12 per bag, 6 bags per case.

Whatmanâ„¢ Polyester Drain Discs, Whatman products (Cytiva) - 230300, Polyester Drain Disc, 10 mm, PE, membrane filter accessories

25mm Filters. Membrane: PTFE. Porosity: 0.45um. Color: Yellow

SunFloâ„¢ Dissolution Filters, SUN-SRi - 400 105

SunFloâ„¢ Dissolution Filters, SUN-SRi - 400 109

SunFloâ„¢ Dissolution Filters, SUN-SRi - 400 111

SP Wilmad-LabGlass Filtration Apparatus, SP Industries - BP-1755-000, 300 ml, 47 mm, Complete Filter Apparatus, 40/35 [ST] Joint Size

SP Wilmad-LabGlass Filtration Apparatus, SP Industries - BP-1755-090, 1000 ml, 90 mm, Complete Filter Apparatus, 40/35 [ST] Joint Size

Funnel, Pe, Buchner, Table Top, With Fixed Perforated Plate, 18In. Fixed Filter Plate. 6.4Mm (1/4In) Thick High Density Polyethylene With A Non-Porous Circumference To Better Fasten Filter Paper To The Plate. Oversized Item May Incur Additional Shipping Charges.

3 Piece 7Cm Reservoir 1/Pk.

Fp 30/0.45 Ca 100/Pk.

Aerosol filter, 0.2um, replacement, used with fluid aspirator system all models.

Puradisc FP 30 mm diameter Syringe Filter. Cellulose acetate, 0.2 um, luer-lock outlet, with larger filtration area (44% greater in comparison with 25 mm) and Designed for aqueous samples.

Puradisc FP 30 mm diameter Syringe Filter. Cellulose acetate, 0.5 um, 50 pk with larger filtration area (44% greater in comparison with 25 mm) and Designed for aqueous samples.

FUNNEL 7CM 400ML 3-piece construction. The funnel is quickly dismantled ready for the insertion of a new filter. The glass sealing flanges of the funnel and reservoir are ground flat to ensure a good filter seal.

Polyester drain discs, 47 mm, PE, 100/pk. For use with membrane hardware where extra support is needed for improved flow rate and throughput. Binder free.

Reservoir 3 Piece 9Cm. Simple And Effective Filter-Holding System Whatman 3-Piece Filter Funnels Have Been Designed to Complement the Range Of Whatman Fine Particle Retention, Rapid Flow Rate Glass Microfiber Filters.

Large Reservoir 3 Piece 7Cm. Simple And Effective Filter-Holding System Whatman 3-Piece Filter Funnels Have Been Designed to Complement the Range Of Whatman Fine Particle Retention, Rapid Flow Rate Glass Microfiber Filters.

VWR Filter upper cup, Sterilized, Pore Size: 0.45um, non-pyrogenic, Membrane Material-PES, 150ml.

MEMBRANE BOX #1, SMALL, SQUARE, 12/PK. plastic containers, with double elastic membrane on top and bottom, once the item is in the box the elastic membrane conforms around it and protects from any movement, overall dimensions LxWxD: 38 x38x 18mm, max useful area: 31 x 31 x 9mm, capacity: 10g

Centrifugal Filter Unit 1.5ml. Centrex Centrifugal Filter Unit with Cellulose Acetate Membrane, Capacity, 1.5mL, Pore Size 0.2um, Ideal for automated systems and high-speed batch filtration with robots.

Microbiological Monitor 100ml. Sterile Microbiological Monitor with Black Cellulose Nitrate Membrane and White Grid, Pore Size: 0.45um, Diameter: 5.6cm, Specifically for membrane filter methods for aqueous samples of up to 100mL.

Microbiological Monitor 100ml. Sterile Microbiological Monitor with Black Cellulose Nitrate Membrane and White Grid, Pore Size: 0.8um, Diameter: 5.6cm, Specifically for membrane filter methods for aqueous samples of up to 100mL.

Microbiological Monitor 100ml. Sterile Microbiological Monitor with Black Cellulose Nitrate Membrane and White Grid, Pore Size: 0.8um, Diameter: 4.7cm, Specifically for membrane filter methods for aqueous samples of up to 100mL.

Savur Analytical Filter Funnel. Analytical Filter funnel, Media: Nitrocellulose, Pore Size: 0.45um, Gridded, 47mm diameter. Polypropylene will be found for total digest of heavy metals. PK12.

Savur Analytical Filter Funnel. Analytical Filter funnel, Media: Polypropylene, Pore Size: 25um, plain, 47mm diameter. Polypropylene will be found for total digest of heavy metals. PK12.

Analytical Funnel 100ml removable membrane-47mm, White/Black Grid Sterile 0.2um, packaged, pack50.

Analytical Funnel 100 ml (removable membrane) 47 mm, sterile, White/Black Grid0.2um pack50.

Analytical Funnel 100 ml (removable membrane) 47 mm, sterile, White/Black Grid0.45um pack50.

Monitor, 0.2um, white/black grid, 56mm, 100ml 50/pk, Cellulose nitrate membrane with choice of pore size, Sterilized and ready for use, Microbiological monitors are designed for monitoring contaminants in liquid samples from raw materials to finished products.

Analytical Funnel 100ml removable membrane-47mm, sterile, White/Black Grid 0.45um, packaged pk50.

Monitor, 0.2um, white/black grid, 56mm, 100ml 50/pk, Cellulose nitrate membrane with choice of pore size, Sterilized and ready for use, Microbiological monitors are designed for monitoring contaminants in liquid samples from raw materials to finished products.

Monitor, 0.45um, white/black grid, 47mm, 100ml 50/pk, Cellulose nitrate membrane with choice of pore size, Sterilized and ready for use, Microbiological monitors are designed for monitoring contaminants in liquid samples from raw materials to finished products.

Monitor, 0.45um, white/black grid, 56mm, 100ml 50/pk, Cellulose nitrate membrane with choice of pore size, Sterilized and ready for use, Microbiological monitors are designed for monitoring contaminants in liquid samples from raw materials to finished products.

Filter. Centrex centrifuge filters, Cellulose Acetate membrane, 0.45um,White, 1.5 ml, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Cellulose Acetate membrane, 0.45um, White, 1.5ml, sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Cellulose Acetate membrane, 0.2um,White, 5ml, sterile,pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots,More than six samples can be processed at once

Filter. Centrex centrifuge filters, Cellulose Acetate membrane, 0.45um,White, 5ml, non-sterile, pk50,Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Cellulose Acetate membrane, 0.45um,White, 5 ml, sterile,pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Cellulose Acetate membrane, 0.8um,White, 1.5 ml, sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Nitrocellulose membrane, 0.2um,White, 1.5 ml, sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Cellulose Acetate membrane, 0.45um,White, 5 ml, sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Cellulose Acetate membrane, 0.45um,White,1.5 ml, sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Nylon membrane, 0.2um,White, 1.5 ml, non-sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Nylonmembrane, 0.2um,White, 5 ml, non-sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Nylonmembrane, 0.2um,White, 5 ml, sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Nylonmembrane, 0.45um,White, 1.5 ml, non-sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Nylonmembrane, 0.45um,White, 5 ml, sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Filter. Centrex centrifuge filters, Nylonmembrane, 0.45um,White, 5 ml, non-sterile, pk50, Reduced contamination risk with radioactive biologically hazardous material, Ideal for automated systems and high-speed batch filtration with robots, More than six samples can be processed at once

Extractor. Ethidium Bromide Extractor Waste System 6/pk, One-step filtration funnel device for the rapid removal of ethidium bromide from gel-staining solutions. This disposable unit contains an activated carbon matrix, The extractor funnel device fits most standard laboratory flasks and bottles.

Extractor. Ethidium Bromide Extractor Waste System 2/pk, One-step filtration funnel device for the rapid removal of ethidium bromide from gel-staining solutions. This disposable unit contains an activated carbon matrix, The extractor funnel device fits most standard laboratory flasks and bottles.

Analytical Funnel 100 ml (removable membrane) 47 mm, sterile, Black/White Grid0.45um.

Analytical Funnel 100ml removable membrane-47mm, sterile, Black/White Grid 0.45um, packaged, pk50.

Monitor, 0.45um, black/white grid, 47mm, 100ml 50/pk, Cellulose nitrate membrane with choice of pore size, Sterilized and ready for use, Microbiological monitors are designed for monitoring contaminants in liquid samples from raw materials to finished products.

Sentino membrane filter dispenser, for the microbiological testing of aqueous samples, easy to load.

Heavy Wall Pressure vessel. Round Bottom, 48ml, number 15 Internal Thread, Vessel Only, 38mm OD.X114mm Lenth, Bushing Size/25.

Category