• 0
Shop Products $

Peptide Synthesis Vessel, 10ml, Solid Phase, Medium Frit, GL 14 thread, Fritted Disc Diameter/15.

24/40 PTFE Stopper with Polypropylene Extraction Nut, Solid.

Septa PTFE Faced Silicone. Rubber Used with open top caps for syringe access. Silicone rubber allows repeated puncturing.

Bushing, Number 80, Internal, Front Seal, Solid, PTFE, Number 235 Viton O-Ring.

Accessories for METTLER TOLEDO Titrators, Mettler Toledo - 23451, Stopper, 14.5 mm

Accessories for METTLER TOLEDO Titrators, Mettler Toledo - 23452, 7.5 mm stopper for V20 titrators

STOPPER, PE, CUP TYPE, #2, 24/PKG, 144/CASE. These polyethylene cup-type stoppers fit tightly, yet remove easily. All are 25mm high. 24 of one size per bag, 6 bags per case.

Bottle Pourer. Hazardous and corrosive chemical pourer made fully from PTFE. Totally inert pouring surfaces, even the neck-sealing ring is encapsulated-in PTFE. Unique design allows direct and controlled -pouring. Fits standard reagent -bottles with neck sizes of 32mm.

Bottle Pourer. Hazardous and corrosive chemical pourer made fully from PTFE. Totally inert pouring surfaces, even the neck-sealing ring is encapsulated-in PTFE. Unique design allows direct and controlled -pouring. Fits standard reagent -bottles with neck sizes of 30mm.

Bottle Pourer. Hazardous and corrosive chemical pourer made fully from PTFE. Totally inert pouring surfaces, even the neck-sealing ring is encapsulated-in PTFE. Unique design allows direct and controlled -pouring. Fits standard reagent -bottles with neck sizes of 38mm.

Beaker With Handle, PFA. Rigid and translucent to allow you to see liquid levels. Feature extraordinary chemical resistance and can be used repeatedly for high-purity applications. Use them with strong oxidizing agents, acids, hydrocarbons and ketones. Molded-in handle.

Beaker With Handle, PFA. Rigid and translucent to allow you to see liquid levels. Feature extraordinary chemical resistance and can be used repeatedly for high-purity applications. Use them with strong oxidizing agents, acids, hydrocarbons and ketones. Molded-in handle.

Joint Sleeve, PTFE. Joint Size: 29/42. Joint sleeves are fitted onto standard taper inner joints to prevent freezing of assembled joints. Sleeve nominal thickness is 0.003 inch.

SP Wilmad-LabGlass PTFE Beaded Fitting Couplings, SP Industries - LG-4661-100

SP Wilmad-LabGlass PTFE Beaded Fitting Couplings, SP Industries - LG-4661-104

SP Wilmad-LabGlass Polypropylene Reservoir Storage Cap, SP Industries - BP-1909-000, Polypropylene Reservoir Storage Cap

TFE COMPRESSION FITTING 1/8IN - CG-1971-81C

TFE COMPRESSION FITTING 1/4IN - CG-1971-81D

TFE COMPRESSION FITTING 3/4IN - CG-1971-81E

Chemware Bottles, Teflon PFA, Wide Mouth. 250ml, leakproof, unbreakable bottles are ideal for storage of virtually all corrosive chemicals and for trace analysis. Bottles can withstand temperatures up to 260[degree]C. Chemically inert. Non-stick surfaces. 40mm PFA cap included.

Chemware Graduated Cylinder, Teflon PFA. 100ml cylinders are made from fluoropolymer with low metal ion content and are excellent for trace analysis. Smooth pouring spout and stable base. Temperature resistant to 260[degree]C. Graduated in 20ml increments.

Chemware Teflon Evaporating Dish. 100ml dish with broad pouring spouts and flat bottoms. Chemically inert to virtually all materials. Heat resistant to 260[degree]C.

Chemware Teflon Evaporating Dish. 400ml dish with broad pouring spouts and flat bottoms. Chemically inert to virtually all materials. Heat resistant to 260[degree]C.

Chemware Evaporating Dish, Teflon PFA. Length/Height: 29.5 mm. Neck I.D. (Plug Measure): 83.3 mm. Capacity to Brim: 116 ml. Transparent for easy viewing. Smooth, non-stick surface. Serviceable from cryogenic temperature to 500[degree]F (260[degree]C). Chemically inert.

Chemware PTFE Boiling Stones. 450g bottle. Ultra-pure, virgin PTFE chips promote efficient boiling. Unaffected by acids, hydrocarbons, ketones, esters, alcohols or alkalies. Ideal for continuous extraction methods, such as EPA SW846, and column packing.

Chemware Ball, Teflon PTFE. Size: 1/8 in. (3.2 mm). For column packing and as mixing beads. Minimizes bumping in boiling. Inert to most liquids and vapors; usable to 550[degree] F (288[degree] C). Resistant to almost all chemicals. Non-contaminating.

Chemware Ball, Teflon PTFE. Size: 1/4 in. (6.4 mm). For column packing and as mixing beads. Minimizes bumping in boiling. Inert to most liquids and vapors; usable to 550[degree] F (288[degree] C). Resistant to almost all chemicals. Non-contaminating.

Tube Microcent Pfa 1.5Ml. Microcentrifuge Tube, 100% PFA, non-binding surface, Non-sterile, autoclavable, Temperature range -200 C to 200 C, fits most standard rotors, max RTF 15000 g, Closure 600-011-83 required

Tube Centrifuge Pfa 50Ml. Centrifuge Tube, 100% PFA, non-binding surface, threaded opening, Non-sterile, autoclavable, Temperature range -200 C to 200 C, fits most standard rotors, max RTF 5000 g, Closure 600-029-01 required

Closure Pfa 53Mm. All PFA construction, Molded ribs for easy handling, Temperature range -200 C to 200 C

Closure Pfa 89Mm. All PFA construction, Molded ribs for easy handling, Temperature range -200 C to 200 C

Dish Petri Pfa 100Ml. All PFA construction, Stackable, Low binding surface, High purity PFA, Temperature range -200 C to 200 C

Tongs Adjustable Pfa. Adjustable Tongs, durable, all PFA Construction, 3 adjustable widths, Chemical resistant, Temperature range -200 C to 200 C

JOINT SLEEVE PTFE 24/40 CS6. Reusable PTFE joint sleeve at single use price. 0.05mm (0.002in) thick with taper of 1.10 on diameter.Eliminates possibility of frozen joints and leakage. No need to lubricate ground joints. Temperature range is -75C to +260C.

JOINT SLEEVE PTFE 29/42 CS6. Reusable PTFE joint sleeve at single use price. 0.05mm (0.002in) thick with taper of 1.10 on diameter.Eliminates possibility of frozen joints and leakage. No need to lubricate ground joints. Temperature range is -75C to +260C.

PFA Vials, Savillex Corporation - 200-003-20, 3 ml (0.1 oz)

PFA Vials, Savillex Corporation - 200-007-20, 7 ml (0.2 oz)

PFA Vials, Savillex Corporation - 200-007-30, 7 ml (0.2oz)

PFA Vials, Savillex Corporation - 200-015-30, 15 ml (0.6 oz)

Closures for PFA Vials, Savillex Corporation - 600-023-01, PFA Closure, 23mm, for use with 30621-024

Closures for PFA Vials, Savillex Corporation - 600-024-01, PFA Closure, 24mm, for use with 30621-026 & 30621-028

Closures for PFA Vials, Savillex Corporation - 600-033-01, PFA Closure, 33mm, for use with 30621-030, 30621-032, 30621-034, & 30621-036

Trays for PFA Vials, Savillex Corporation - 730-2001, 10-Place Vial Tray, PP (for 3, 5, 6 & 7 mL Sizes)

Trays for PFA Vials, Savillex Corporation - 730-2002, 10-Place Vial Tray, PP (for 15, 22, 30, & 60 mL Sizes)

SPRAY BALL PTFE24/40 18MM BALL - CG-1989-A-01

Chemware Teflon Resin PFA Jar. 2000mL large mouth PFA jar for storing solutions, pastes, and bulk materials without leaching, corrosion, contamination, or evaporation. Knurled top for sure grip. Secondary inner seal for safe storage of any substance. Stackable.

KONTESbrand Stirrer Blade. PTFE, 10 mm, For Flask, Capacity (mL) 50,100, Approx. Height x Width (mm) 15 x 46 Minimum Flask Center Neck Size [Standard Taper] - [Spherical Joint] 19/22

TFE Reducing Adapter. 3/4 to 1/4.

45/50 TFE Baffle Adapter. Complete with 3/4-1/2 NPT fluoropolymer resin compression adapter.

Tape. Fluo-kem lab-thread tape, Polytetrafluoroethylene, 12.7mm x 7.6 meters long, Lubricates and seals irregular surfaces, threads and joints without grease or adhesive, Use with desiccators, bell jars, glass joints and freeze-drying equipment for tight seal that will not seize over time.

SINKER, TEFLON, TUBING, SET/2. Teflon sinkers keep tubing at the bottom of your container. Ideal for use with pumps and dispensers, these sinkers have hose barb ends for simple tubing connection. Solvent resistant and autoclavable. Sold as set of two sizes or one each.

Micro Spatula, Teflon-Coated. Hayman style. Both ends have durable Teflon coating, which gives an inert surface for handling chemicals. Prevents loss due to sticking. Overall length: 15.2cm.

Chemware Stirring Rod, PTFE Fluoropolymer. Length/Height (w/Closure): 204.8 mm (8.1 in.). Diameter (Ring Measure): 7.6 mm (0.3 in.). Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer.

Chemware Stirring Rod, PTFE Fluoropolymer. Length/Height (w/Closure): 255.6 mm (10.1 in.). Diameter (Ring Measure): 7.6 mm (0.3 in.). Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer.

Chemware Stirring Rod, PTFE Fluoropolymer. Length/Height (w/Closure): 306.4 mm (12.1 in.). Diameter (Ring Measure): 7.6 mm (0.3 in.). Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer.

Chemware Stirring Rod, PTFE Fluoropolymer. Length/Height (w/Closure): 410.6 mm (16.2 in.). Diameter (Ring Measure): 7.6 mm (0.3 in.). Contains fully enclosed steel insert for stiffness, yet can be bent to various shapes for use as a powered stirrer.

Stopcocks Straight Bore PTFE Plug. Stopcock, Straight Bore, without PTFE Plug Replacement plug is 41500F listed below.

Stopcocks Straight Bore PTFE Plug. Stopcock Plug, PTFE, Straight Bore, size 6, Qty. 12 Replacement plug is 41500F listed below.

FLUO-KEM Teflon Lab-Thread Tape. Provides a vacuum tight seal for small apertures, threads, and joints of all types. Eliminates the need for lubricants and vacuum greases. Use on ground glass joints, desiccators, bell jars, freeze-drying equipment, etc. 12.7mmx762cm roll.

Three Star™ Tweezers, Anti-Crush Devices, Excelta Corp® - 53C-SA, Tweezers, straight very fine point, 3 star quality, anti-crush

Chemware Watch Glass, Teflon PTFE. Diameter: 5.0 cm. Diameter (Ring Measure): 51.0 mm. Capacity to Brim: 11 ml. Ideal for weighing, crystallization and drying. They also are useful as beaker covers. All sizes are molded to the same contour for easy stacking. Inert; chemically resistant.

Chemware Watch Glass, Teflon PTFE. Diameter: 7.5 cm. Diameter (Ring Measure): 77.4 mm. Capacity to Brim: 21 ml. Ideal for weighing, crystallization and drying. They also are useful as beaker covers. All sizes are molded to the same contour for easy stacking. Inert; chemically resistant.

Chemware Watch Glass, Teflon PTFE. Diameter: 10.0 cm. Diameter (Ring Measure): 103.0 mm. Capacity to Brim: 33 ml. Ideal for weighing, crystallization and drying. They also are useful as beaker covers. All sizes are molded to the same contour for easy stacking. Inert; chemically resistant.

Chemware Watch Glass, Teflon PTFE. Diameter: 12.5 cm. Diameter (Ring Measure): 125.3 mm. Capacity to Brim: 86 ml. Ideal for weighing, crystallization and drying. They also are useful as beaker covers. All sizes are molded to the same contour for easy stacking. Inert; chemically resistant.

Chemware Watch Glass, Teflon PTFE. Diameter: 15.0 cm. Diameter (Ring Measure): 153.4 mm. Capacity to Brim: 237 ml. Ideal for weighing, crystallization and drying. They also are useful as beaker covers. All sizes are molded to the same contour for easy stacking. Inert; chemically resistant.

Shallow Form Watch Glass. Concave, clear, annealed glass covers. Used to return condensation to beakers. Edges are fire polished. Made of soda lime glass. Diameter: 110mm.

FLUO-KEM, SLEEVE, TEFLON, WITH GRIP RING & OUTER RIBS, 24/40, 3/PKG. Keep standard taper glass joints from seizing, leaking or galling.

FLUO-KEM, SLEEVE, TEFLON, WITH GRIP RING & OUTER RIBS, 29/42, 3/PKG. Keep standard taper glass joints from seizing, leaking or galling.

SAFE-LAB, TUBING ADAPTER, PP/TEFLON, 24/40. Teflon body with Viton O-ring. Polypropylene screw cap on top with inside O-ring for depth adjustment of glass tubing. Bottom inner joint has a SAF-T-LINE threaded extracting nut for easy removal of adapter. Not autoclavable.

SAFE-LAB Thermometer Adapter Standard Taper Joint, Teflon. Teflon body with Viton O-ring for air tight vacuum work. Threaded polypropylene screw cap on top with inside O-ring. Standard taper joint size: 24/40.

SAFE-LAB Thermometer Adapter Standard Taper Joint, Teflon. Teflon body with Viton O-ring for air tight vacuum work. Threaded polypropylene screw cap on top with inside O-ring. Standard taper joint size: 19/22.

SAFE-LAB Thermometer Adapter Standard Taper Joint, Teflon. Teflon body with Viton O-ring for air tight vacuum work. Threaded polypropylene screw cap on top with inside O-ring. Standard taper joint size: 14/20.

SAFE-LAB, STIRRER BEARING, PP/TEFLON, WITH STOPER-LOC-NUT, 29/42. SAF-T-LINE threaded size for use with Stopper-Loc Nut. Allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time. Sold complete with Stopper-Loc nut and two Teflon inserts.

SAFE-LAB, STIRRER BEARING, PP/TEFLON, WITH STOPER-LOC-NUT, 24/40. SAF-T-LINE threaded size for use with Stopper-Loc Nut. Allows stirrer bearing to be locked to outer ground joint when stirring viscous materials for long periods of time. Sold complete with Stopper-Loc nut and two Teflon inserts.

SAFE-LAB, STIRRER BEARING, PP/TEFLON, 24/40. Teflon PTFE body with Viton O-ring for use with 10 mm stirring rods.

DURAN TILT GL56/GL45 Thread Adaptor PTFE.

Three-way valve 10x4mm. Three-way valve, Material: PTFE, With hose nozzles, Blue handles made of Polypropylene, Resistant to chemicals, Autoclavable, Very easy connection, Vacuum suitable up to 10 raise to power -1 mmHg, Maximum pressure: 1 bar, Diameter: 10x4mm

Two-way valve 4-5mm. Two-way valve, Material: PTFE, With hose nozzles, Blue handles made of PP, Resistant to chemicals, Autoclavable, Very easy connection, Vacuum suitable up to 10 raise to power -1 mmHg, Maximum pressure: 1 bar, Diameter: 2mmx4-5mm

Two-way valve 6-8mm. Two-way valve, Material: PTFE, With hose nozzles, Blue handles made of PP, Resistant to chemicals, Autoclavable, Very easy connection, Vacuum suitable up to 10 raise to power -1 mmHg, Maximum pressure: 1 bar, Diameter: 3mmx6-8mm

Two-way valve 4x10mm. Two-way valve, Material: PTFE, With hose nozzles, Blue handles made of PP, Resistant to chemicals, Autoclavable, Very easy connection, Vacuum suitable up to 10 raise to power -1 mmHg, Maximum pressure: 1 bar, Diameter: 4x10mm

Scoop 1000ml. Scoop, Material: PTFE, Color: White, Completely inert against all substances, All parts coming into contact with the sample medium, Rod is stabilised with a steel core which is completely encapsulated, Diameter: 105x155mm, Capacity: 1000ml

Extension Rod, For PTFE scoop of Diameter 60cm.

Scoop PTFE 10ml. Scoop, All parts coming into contact with the sample medium are made of pure white PTFE, Completely inert against all substances (elementary fluoride exception), rod is stabilised with a steel core which is completely encapsulated PTFE, Diameter: 25mm, Height: 34mm, Capacity: 10ml

Scoop PTFE 100ml. Scoop, All parts coming into contact with sample medium are made of pure white PTFE, Completely inert against all substances (elementary fluoride exception), rod is stabilised with a steel core which is completely encapsulated PTFE, Diameter: 55mm, Height: 65mm, Capacity: 100ml

Scoop PTFE 250ml. Scoop, All parts coming into contact with sample medium are made of pure white PTFE, Completely inert against all substances (elementary fluoride exception), rod is stabilised with a steel core which is completely encapsulated PTFE, Diameter: 70mm, Height: 95mm, Capacity: 250ml

Scoop PTFE 10ml. Scoop, All parts coming into contact with the sample medium are made of pure white PTFE, Completely inert against all substances (elementary fluoride exception), rod is stabilised with a steel core which is completely encapsulated PTFE, Diameter: 25mm, Height: 34mm, Capacity: 10ml

Valve three-way PTFE for 4.5mm hose Diameter, made of solid PTFE with hose nozzles. Resistant to chemicals, with Blue handles made of PP, Resistant to compression maximum 1 bar, Autoclavable, Vacuum suitable up to 10 raised to -1mmHg, Nominal width: 2 mm

Valve three-way PTFE for 6.8mm hose Diameter, made of solid PTFE with hose nozzles. Resistant to chemicals, with Blue handles made of PP, Resistant to compression maximum 1 bar, Autoclavable, Vacuum suitable up to 10 raised to -1mmHg, Nominal width: 3 mm

Vactrap Red Bin HDPE 2l 10x18x12in. Vactrap Red Bin, Bottle Material: HDPE, Bin/Cap Material: Polypropylene, Tubing: TPE, Vent Filter Material: PTFE 0.2um, Tubing ID: 1/4in, Pinch clamp allows for modulation of vacuum, Retains any aerosolized bacteria, Dimension: 10x18x12in, Bottle Size: 2l

DURAN Red GL High Temperature Screw Cap from PBT, ETFE Pouring ring, red, GL 45, 4mm.

Liner for premium cap GL 25, PTFE-coated, platinum-cured silicone, 23.5mm.

Liner for premium cap GL 45, PTFE-coated, platinum-cured silicone, 43.1mm.

Septum, Silicone DURAN PTFE coated GL 45 for piercing (Platinum catalysed VMQ), High quality PTFE film reduces the risk of solvent contamination, Wide temperature usage range from -50 up to + 180 deg C, Suitable for autoclaving and dry heat sterilisation

Dish Evaporating Ptfe Flat Form 25 Ml. Dish, Evaporating, Flat form, Material: PTFE, Isostatically molded in pure, FDA approved, PTFE. Totally chemically resistant and inert. Super smooth internal finish, Capacity: 25 ml

Dish Evaporating Ptfe Flat Form 50 Ml. Dish, Evaporating, Flat form, Material: PTFE, Isostatically molded in pure, FDA approved, PTFE. Totally chemically resistant and inert. Super smooth internal finish, Capacity: 50 ml

Dish Evaporating Ptfe Flat Form 100 Ml. Dish, Evaporating, Flat form, Material: PTFE, Isostatically molded in pure, FDA approved, PTFE. Totally chemically resistant and inert. Super smooth internal finish, Capacity: 100 ml

Dish Evaporating Ptfe Flat Form 350 Ml. Dish, Evaporating, Flat form, Material: PTFE, Isostatically molded in pure, FDA approved, PTFE. Totally chemically resistant and inert. Super smooth internal finish, Capacity: 350 ml

Category