• 0
Shop Products $

Deactivated, Universal Press-Tight Connectors. High-temperature silanization for excellent inertness. Ideal for trace analysis of active compounds. Ideal for the analysis of pesticides, semivolatile pollutants and clinical/forensic samples.

Rtx-502.2 GC Column. For volatile organic compounds, light hydrocarbons and aromatics. Composition: crossbonded diphenyldimethylpolysiloxane. Range: -20 to 270[degree]C. ID: 0.32mm. Length: 60m. Thickness: 1.80um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260, and GRO methods.

Chromatography TLC Spotting Capillaries Microcaps. Capacity; 50.0 L. Length; 100 mm. Relative I.D;.0314. Relative O.D;.043 Microcaps are ingeniously simple.in concept and in use.

Chromatography TLC Spotting Capillaries Microcaps. Capacity; 25.0 L. Length; 65 mm. Relative I.D;.0272. Relative O.D;.0382 Microcaps are ingeniously simple.in concept and in use.

Chromatography TLC Spotting Capillaries Microcaps. Capacity; 20.0 L. Length; 64 mm. Relative I.D;.0249. Relative O.D;.0355 Microcaps are ingeniously simple.in concept and in use.

Chromatography TLC Spotting Capillaries Microcaps. Capacity; 10.0 L. Length; 41 mm. Relative I.D;.0219. Relative O.D;.0314 Microcaps are ingeniously simple.in concept and in use.

Chromatography TLC Reagent Sprayer with Screw Thread Ground Joint CHROMAFLEX. Flask Capacity; 125 mL. [standard taper] Joints; 24/40. Approx.

Chromatography TLC Reagent Sprayer with Screw Thread Ground Joint CHROMAFLEX. Flask Capacity; 10 mL. [standard taper] Joints; 19/22. Approx.

Chromatography TLC Developing Tank Rectangular with Latch Lid CHROMAFLEX. TLC Developing Tank Only, Latch

Chromatography TLC Developing Tank Rectangular with Latch Lid CHROMAFLEX. TLC Latch Lid

TLC Rectangular Developing Tanks. Clear molded glass developing tank. Allows unobstructed photography or visual inspection of TLC plates. Latch Lid with PTFE retainers holds lid firmly to tank, drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm, or four 5x20cm Plates.

Chromatography TLC Developing Tank Rectangular with Nonslip Lid CHROMAFLEX. TLC Nonslip Lid

TLC Rectangular Developing Tanks. Clear molded glass developing tank. Unobstructed photography or visual inspection of TLC plates. Complete with Non-slip Lid with PTFE retainers and lifting knob, drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm, or four 5x20cm Plates.

Chromatography TLC Developing Tank Rectangular with Nonslip Lid CHROMAFLEX. TLC Developing Tank Only

Chromatography TLC Developing Tank Rectangular with Standard Lid CHROMAFLEX. For Tank; 10 x 20 or 20 x 20 TLC Standard Lid Manufactured from sturdy molded glass bricks with clear sides allowing unobstructed visual inspection if TLC plated up to 20 x 20 cm in size.

TLC Rectangular Developing Tanks. Clear, molded glass developing tank. Allows unobstructed photography or visual inspection of TLC plates. Complete with Standard Lid, drilled for #0 rubber stoppers for reagent pouring. Holds two 20x20cm, or four 5x20cm Plates.

TLC Cylindrical Developing Tank. Cylindrical glass tank for the development of 10x20cm plates. Tank provides maximum vapor phase saturation with a minimal amount of solvent. Complete with glass lid.

TLC Silica Gel 60 Glass Plates and Sheets, MilliporeSigma. TLC Silica Gel 60 Plates and Sheets, MilliporeSigma - 1.16487.0001

TLC Silica Gel 60 Glass Plates and Sheets, MilliporeSigma. TLC Silica Gel 60 Plates and Sheets, MilliporeSigma - 1.15327.0001

TLC Silica Gel 60 Glass Plates and Sheets, MilliporeSigma. TLC Silica Gel 60 Plates and Sheets, MilliporeSigma - 1.15326.0001

EMD # 1.12537.0001 replaces and is identical to EMD # 12537-1.

TLC Sprayers and Components, MilliporeSigma - 1.08541.0001, Spray Nozzles for TLC Sprayer; Includes 6 Units: 5 Units 0.8 mm, 1 Unit 1.25 mm

TLC Sprayers and Components, MilliporeSigma - 1.08540.0001, TLC Sprayer

Silica Gel 60 HF254 for Thin-Layer Chromatography, Merck - 1.07739.1000, 1 kg, Silica gel 60 HF254 for thin-layer chromatography

Silica Gel 60 G for Thin-Layer Chromatography, Merck - 1.07731.1000, 1 kg, Silica gel 60 G for thin-layer chromatography

Silica Gel 60 GF254 for Thin-Layer Chromatography, Merck - 1.07730.1000, 1 kg, Silica gel 60 GF254 for thin-layer chromatography

NINHYDRIN SPRAY SOLUTION TLC - 1.06705.0100, 100 ml

TLC Silica Gel 60 Glass Plates and Sheets, MilliporeSigma. TLC Silica Gel 60 Plates and Sheets, MilliporeSigma - 1.05729.0001

TLC Silica Gel 60 Glass Plates and Sheets, MilliporeSigma. TLC Silica Gel 60 Plates and Sheets, MilliporeSigma - 1.05719.0001

TLC Silica Gel 60 Glass Plates and Sheets, MilliporeSigma. TLC Silica Gel 60 Plates and Sheets, MilliporeSigma - 1.05715.0001

Aluminium Oxide F254 Plates And Sheets, MilliporeSigma - 1.05713.0001

Multiformat Pre-Scored Plates, Silica Gel 60 F254, MilliporeSigma - 1.05620.0001

Plates, Laser Coded, Silica Gel 60, MilliporeSigma - 1.05566.0001

TLC Silica Gel 60 Glass Plates and Sheets, MilliporeSigma. TLC Silica Gel 60 Plates and Sheets, MilliporeSigma - 1.05554.0001

DRAGENDORFFS RGT SPRAY SOL TLC - 1.02035.0100, 100 ml

Aluminium Oxide 60 GF254 Neutral (type E) for Thin-Layer Chromatography, Merck - 1.01092.0500, 500 g

Standard Silica TLC Plate, Plate Size 20X20 cm, pH 5.0, Layer Thickness 250 Um, Pore Size 60A, 254 Fluorescent, Aluminium Back.

Silica TLC Plate. Plate Size 20x20 cm, Layer Thickness 250 um, Pore Size 60A, 254 Fluorescent, Equivalent to EMD, glass back

Silica TLC Plate. Plate Size 2.5+7.5 cm, Layer Thickness 250 um, Pore Size 60A, 254 Fluorescent, Equivalent to EMD; glass back

Silica Gel GHLF UNIPLATESâ„¢ TLC Plates, Analtech. Silica Gel GHLF UNIPLATESâ„¢ TLC Plates, Analtech, Miles Scientific - P21011

Tlc Plate, Silica , Plate Size 20X20 Cm. Layer Thickness 250 Um, Pore Size 60A, 254 Fluorescent, With Caso4 Binder; Glass Back.

Tlc Plate, Silica , Plate Size 2.5+7.5 Cm. Layer Thickness 250 Um, Pore Size 60A, 254 Fluorescent, With Caso4 Binder; Glass Back.

PLATE TLC SILICA 10X10 CM 60A - T-CS100100-M-40

HPLC mobile phase reservoir and storage bottles, 500mL. White enamel graduations and marking patch on high quality type 33 borosilicate glass. Standard GL45, blue. screw cap and sealing ring included. 10/case.

HPLC mobile phase reservoir and storage bottle, 1 Liter. White enamel graduations and marking patch on high quality type 33 borosilicate glass. Standard GL45, blue. screw cap and sealing ring included. Not coated. 1 Each.

Rotors for CycloGraph™ Systems, Analtech - R02207P, 6000 µm Pre-Scaped Silica Gel Rotor

Rotors for CycloGraph™ Systems, Analtech - R02206P, 4000 µm Pre-Scaped Silica Gel Rotor

Rotors for CycloGraph™ Systems, Analtech - R02205P, 2000 µm Pre-Scaped Silica Gel Rotor

UNIPLATESâ„¢ Hard Layer Silica Gel HLF Plates, Analtech - P47521

UNIPLATESâ„¢ Hard Layer Silica Gel HLF Plates, Analtech - P47011

Preparative TLC Plates, Analtech - P02015

Preparative TLC Plates, Analtech - P02013

TLC DEVELOPING CHAMBER, CYLINDRICAL. Stopper Only. Joint size: 60/15. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle.

TLC DEVELOPING CHAMBER, CYLINDRICAL. Stopper Only. Joint size: 34/15. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle.

TLC DEVELOPING CHAMBER, CYLINDRICAL. Bottle Only. Joint size: 60/15. Fits Plate Size: 2x8in./50x200mm. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint.

TLC DEVELOPING CHAMBER, CYLINDRICAL. Bottle Only. Joint size: 60/15. Fits Plate Size: 2x4in./50x100mm. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint.

TLC DEVELOPING CHAMBER, CYLINDRICAL. Bottle Only. Joint size: 34/15. Fits Plate Size: 1x4in./25x100mm. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint.

TLC DEVELOPING CHAMBER, CYLINDRICAL. Bottle Only. Joint size: 34/15. Fits Plate Size: 1x3in./25x75mm. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint.

TLC DEVELOPING CHAMBER, CYLINDRICAL. Complete Chamber. Joint size: 60/15. Fits Plate Size: 2x8in./50x200mm. Cylindrical glass chamber for development of TLC plates from 25x75mm to 50x200mm. Chamber has a short length standard taper outer joint.

TLC Developing Chamber, Cylindrical. Includes bottle and stopper. Joint size: 60/15. Fits plate size: 50x100mm. Cylindrical glass chamber for development of TLC plates. Chamber has a short length standard taper outer joint. Short length inner stopper has tool ball style handle.

TLC Developing Chamber, Cylindrical. Includes bottle and stopper. Joint size: 34/15. Fits plate size: 25x100mm. Cylindrical glass chamber for development of TLC plates. Chamber has a short length standard taper outer joint and a hex base for added stability. Inner stopper has tool ball style handle.

TLC Developing Chamber, Cylindrical. Includes bottle and stopper. Joint size: 34/15. Fits plate size: 25x75mm. Cylindrical glass chamber for development of TLC plates. Chamber has a short length standard taper outer joint and a hex base for added stability. Inner stopper has tool ball style handle.

TLC TANK RACK, FLUOROPOLYMER RESIN COATED ALUMINUM. TLC Tank Rack. fluoropolymer resin coated aluminum rack to fit either CG-1183 or CG-1184 TLC developing tank. Rack will hold six 20cmx20cmx1/8in. or twelve 20cmx20cmx1/16in. plates.

Replacement Lid. For use with TLC Developing Tank (80060-616).

TLC DEVELOPING TANK. TLC Tank, Complete. Heavy duty molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds, and the bottom is ground to insure stability. Inside dimensions of the tank are 27cm widex7cm deepx26cm high (10 5/8in.

TLC DEVELOPING TANK, LATCH-LID. Replacement Latch-Lid Only. Heavy duty, molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability.

TLC DEVELOPING TANK, LATCH-LID. Latch Lid-Tank, Complete. Heavy duty, molded TLC developing tank for use with plates up to 20x20cm (8in.x8in.). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability.

TLC SPOTTING CAPILLARY TUBES. Length Inches: 8; I.DXO.D; 0.5x1.00mm. Non-calibrated capillary tubes made from borosilicate glass. For use with aqueous and organic solutions. Tubes are available in the listed sizes and sold in 1/2 pound packages.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Reservoir Only. 500ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Reservoir Only. 125ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Reservoir Only. 50ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Atomizer Top Only. 500ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Atomizer Top Only. 125ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Atomizer Top Only. 50ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Complete Sprayer. 500ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Complete Sprayer. 125ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. Complete Sprayer. 50ml. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns. Spray pattern is adjustable by varying the coverage of the vent hole with the users thumb.

ANTENNA SET FOR TLC EXPLORER 1 UNIT - 1.52619.0001

DUST COVER FOR TLC EXPLORER 1 UNIT - 1.52618.0001

FRONT UNIT FOR TLC EXPLORER 1 UNIT - 1.52616.0001

DRAWER UNIT FOR TLC EXPLORER 1 UNIT - 1.52615.0001

ELECTRONIC UNIT FOR TLC EXPLORER - 1.52614.0001

ILLUMINATION UNIT 1 UNIT - 1.52613.0001

BASE PLATE FOR TLC EXPLORER 1 UNIT - 1.52612.0001

POWER BANK FOR TLC EXPLORER 1 UNIT - 1.52611.0001

TLC EXPLORER DOCUMENTATION SYSTEM - 1.52610.0001

Siliaplate Al Tlc - Aluminum-Backed, C18 (13%), 150 um, (20X20 Cm).

Siliaplate Al Tlc - Aluminum-Backed, 200 um, (20X20 Cm).

Siliaplate Pl Tlc - Plastic-Backed, 200 um, (20X20 Cm).

Siliaplate G Tlc - Glass-Backed, 250 um, (10X20 Cm), Scored (2.5X10 Cm).

Siliaplate G Tlc - Glass-Backed, 250 um, (5X20 Cm), Scored (2.5x5 cm).

Siliaplate G Tlc - Glass-Backed, 250 um, (5X20 Cm), Scored (2.5X5 Cm).

Siliaplate G Prep Tlc - Glass-Backed, 2000 um, (20X20 Cm), Scored (5X20 Cm).

Siliaplate G Prep Tlc - Glass-Backed, 1000 um, (20X20 Cm), Scored (5X20 Cm).

Siliaplate G Prep Tlc - Glass-Backed, 500 um, (20X20 Cm), Scored (5X20 Cm).

Siliaplate G Tlc - Glass-Backed, 250 um, (20X20 Cm), Scored (5X20 Cm).

Siliaplate G Hptlc - Glass Backed, Nh2, 150 um, (20X20 Cm).

Siliaplate G Hptlc - Glass Backed, Cn, 150 um, (10X10 Cm).

Siliaplate G Hptlc - Glass-Backed, C8, 150 um, (10X10 Cm).

Siliaplate Prep Tlc - Glass-Backed, C18 (13%).

Siliaplate G Tlc - Glass-Backed, C18 (13%), (20X20 Cm), 200Um.

Siliaplate G Hptlc - Glass-Backed, C18 (13%), 150 um, (10X10 Cm).

Siliaplate G Tlc - Glass-Backed, Special Layer For Kmn04, 250 um, (20X20 Cm).

Siliaplate G Tlc - Glass-Backed, Hard Layer (General Purpose), 250 um, (20X20 Cm).

Siliaplate G Tlc - Glass-Backed, 250 um, (2.5X7.5Cm).

Siliaplate Al Tlc - Aluminium-Backed, Neutral Alumina Coated, 200 um, (20X20 Cm).

Siliaplate G Tlc - Glass-Backed, Neutral Alumina Coated, 250 um, (20X20 Cm).

TLC Cutter for SiliaPlate Plate (up to 20 x 20cm).

SiliaPlate Rectangular TLC Developing Chamber, Perform qualitative analysis on TLC plates, Detect and numerize your TLC plates under UV254 nm and visible mode, several storage formats jpg, eps, Suitable for reading 10x10cm, 10x20cm and 20x20cm plates

UNIPLATES Silica Gel Plate, GHLF. 250um. Size: 10x20cm. Scored.

Scored Silica Gel GF 250-m 10x20cm. Most widely used silica gel TLC plates. No organic substances are added to these products, thus making them compatible with sulfuric acid charring visualization. (25 plates/box)

Multi-Well Rack VWR With 96 Well Pcr Pack5.

Silica Gel Plate. UNIPLATES Silica Gel Plate, G. 250um. Size: 20x20cm; Pack of 25.

UNIPLATES Silica Gel Plate, GF. 250um. Size: 20x20cm. Scored.

PYREX brand, Chromatographic Reagent Atomizer. Atomizer. 250 mL. 208 mm. For use in spraying reagents in thin layer chromotography. With full length [standard taper] 24/40 joint between reservoir and spraying device.

PYREX brand, Chromatographic Reagent Atomizer. Atomizer. 125 mL. 188 mm. For use in spraying reagents in thin layer chromotography. With full length [standard taper] 24/40 joint between reservoir and spraying device.

Round Developing Chamber. For 5cm wide plates, accommodates two plates simultaneously. Uses 25ml of solvent for atmosphere saturation. 6.4diameterx23Hcm. Includes borosilicate glass jar and plastic snap-on cap.

Round Developing Chamber. For 10x20cm wide plates, accommodates two plates simultaneously. Uses 75ml of solvent for atmosphere saturation. 12.9diameterx23Hcm. Includes borosilicate glass jar and plastic snap-on cap.

Clear Glass Tank. Heavyweight construction and ground flat bottom. Top lip of tank is also ground flat and beveled inside and outside to eliminate any sharp edges. Lid has handle for easy removal. Six-plate aluminum rack fits snugly in tank. Tank is 8.6cm in depth. Size: 10cm.

Multiple Plate Development Rack. Anodized aluminum. Sizes available to hold six 10x10cm plates.

Accessories for TLC Developing Chamber, General Glass Blowing - 60-8, Non-Slip Lid for Standard Units

Clear Glass Tank. Heavyweight construction and ground flat bottom. Top lip of tank is also ground flat and beveled inside and outside to eliminate any sharp edges. Lid has handle for easy removal. Six-plate aluminum rack fits snugly in tank. Tank is 6.4cm in depth. Size: 10cm.

GLASS PLATE 3MM THICKNESS 20X20CM PK10 - 50-8

Nonslip Lid for TLC Developing Chambers (21432-739, -761) and Multiplate Developing Chambers (21432-740).

Glass Lid. Plain Glass Lid for TLC Developing chambers.

TLC Developing Chamber. Sturdy, molded, clear-glass block. Develop two 20x20cm plates or equivalent simultaneously without rack. Chamber capacity approximately 4.2L. Inside dimensions: 27Lx7.5Wx26Hcm. Includes Nonslip Lid, Internal fluoropolymer resin Shoulder.

RACK ALUMN MULTIPCK TEF COATED - 80-9T

Aluminum Rack. Replacement aluminum rack for use in TLC Multiplate Developing Chambers.

Multiplate Developing Chamber. For TLC. Sturdy, molded clear glass block. Holds up to six 20x20cm plates. Chamber is 27Lx7.5Dx26Hcm. Includes jar, anodized aluminum rack, and nonslip lid with lifting knob.

TLC Developing Chamber. Sturdy, molded, clear-glass block. Develop two 20x20cm plates or equivalent simultaneously without rack. Chamber capacity approximately 4.2L. Inside dimensions: 27Lx7.5Wx26Hcm. Includes flat glass lid.

Equilibration Latch Lid. Equilibration Latch-Lid for use with the Chromatotank chromatography developing tank.

Latch Lid. Latch-Lid and hardware for use with the Chromatotank chromatography developing tank.

Lid Only. For TLC Developing Chamber (21432-703).

Multiplate Rack. Replacement rack for use with the Chromatotank chromatography developing tank.

Chromatotank. Heavy glass chromatography developing tank. Interior dimensions: 27Lx7Dx27Hcm.

Latch-Lid Chromatotank Unit. Heavy glass construction. Stainless steel latching device holds the ground glass surfaces of the lid and tank firmly in place. Interior dimensions: 27Lx7Dx27Hcm. Includes glass developing tank, latch-lid with hardware, equilibration latch-lid and multiplate rack.

TLC Developing Chamber. Latch lid. Sturdy, molded, clear-glass block. Flat surface walls. Ground lip of uniform flatness. Raised ridge midway on inside ends and bottom of jar. Develops two 20x20cm plates or equivalent simultaneously without rack. Inside dimensions: 27x7.6x25.7cm.

STORAGE CABINET ACRYLIC - 90-5

Ten-Plate Drying Rack, General Glass Blowing - 90-1, Ten-Plate Drying Rack

JAR TLC UNIT FLAT LID S/S RACK - 80-1

PLATES GLASS 10X20CM - 50-4

DESICCATING CABINET - 90-8

Developing Tank, TLC, Cylindrical, Screw Cap. Plate Width x Length: 50mm x 100mm; Approxiamte Height: 120mm. Glass cylindrical developing chambers with flat bottom and molded plastic caps.

Developing Tank, TLC, Cylindrical, Screw Cap. Plate Width x Length: 25mm x 75mm; Approxiamte Height: 95mm. Glass cylindrical developing chambers with flat bottom and molded plastic caps.

Chromatography TLC Sprayers, Wilmad-LabGlass. SP Wilmad-LabGlass Chromatography TLC Sprayers, SP Industries - LG-4590-102, 250 mL. 250 ml, TLC Sprayer, Complete Assembly

Sprayer, TLC Reagent, Complete. Capacity: 125mL; Joint Size: [ST] 24/40. For spraying chromagenic reagents when using thin layer or paper chromatography. Complete unit consists of spray head, flask and LG-1004-108 plastic clamp.

Cartridge Column 1.0mm I.D.x5mm, packed with Acclaim pepmap100 C18, 5 um, 100A set of 5 cartridge. Column Type: Peptide, for Use With: UltiMate 3000 Proteomics MDLC System, Diameter: 1mm, Pore Size: 100A, Stationary Phase: Acclaim PepMap C18, Material: Stainless Steel.

Category