• 0
Shop Products $

Flask, Cell Culture/Media Erlenmeyer with GL45 Screw Thread, Capacity :250ml, Height 125mm OD 81mm

Flask, Cell Culture/Media Erlenmeyer with GL45 Screw Thread, Capacity :1000ml, Height 205mm OD 128mm

Flask, Cell Culture/Media Erlenmeyer with GL45 Screw Thread, Capacity :2000ml, Height 265mm OD 161mm

Rubber Adapters, 1/4inch hole in the top for use with plain stem thermometers or gas inlet tubes.

POLYETHYLENE DEWAR FLASK, 10L. polyethylene, vented and insulated HDPE covers, unbreakable, chemically resistant, withstands temperatures from -196 to 100- C (-321 to +212- F), Double walls minimize heat exchange, molded-in-ribs, carrying handle, overall

Multi-Fiber Test Fabric, useful for testing dyes on a variety of fabrics, Accessory for Microscale Williamson kits, Three-foot length of fabric four inches wide, 8 strips of different fibers woven side by side, Length: 36inch, Width: 4inch

Flask. Kimax Flask, Erlenmeyer, Narrow Mouth, ceramic enamel scales, Tops are reinforced, Body is thick-walled, 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements, Color: Pink, Size: 50ml

Flask. Kimax Flask, Erlenmeyer, Narrow Mouth, ceramic enamel scales, Tops are reinforced, Body is thick-walled, 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements, Color: Pink, Size: 1000ml

Flask. Kimax Flask, Erlenmeyer, Narrow Mouth, ceramic enamel scales, Tops are reinforced, Body is thick-walled, 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements, Color: Pink, Size: 500ml

Flask. Kimax Flask, Erlenmeyer, Narrow Mouth, ceramic enamel scales, Tops are reinforced, Body is thick-walled, 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements, Color: Pink, Size: 250ml

Flask. Kimax Flask, Erlenmeyer, Narrow Mouth, ceramic enamel scales, Tops are reinforced, Body is thick-walled, 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements, Color: Pink, Size: 125ml

Neutral Oil and Loss Column 175ml. Neutral Oil and Loss Column, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements, Column ID: 19mm, Length: 270mm, Length: 320mm, Porosity: 40-60um, Size: 175ml

Narrow Mouth Erlenmeyer Flask 250ml. Narrow Mouth Erlenmeyer Flask, Jointed, Height: 60mm, Standard Taper Joints: 19/22, Borosilicate glass, USP Type I and ASTM E438, Type I, Class A requirements, Capacity: 250ml

Narrow Mouth Erlenmeyer Flask 25ml. Narrow Mouth Erlenmeyer Flask, Jointed, Height: 60mm, Standard Taper Joints: 19/22, Borosilicate glass, USP Type I and ASTM E438, Type I, Class A requirements, Capacity: 25ml

Bidwell-Sterling Moisture Test Distillation Receiver 5ml. Bidwell-Sterling Moisture Test Distillation Receiver, Borosilicate glass, USP Type I and ASTM E438, Type I, Class A requirements, Height: 296mm, Width: 90mm, Standard Taper Joints: 24/40, Size: 5Ml

Allihn Condensers with Full Length Joints 29/42. Allihn Condensers with Full Length Joints, Borosilicate glass, USP Type I and ASTM E438, Type I, Class A requirements, Height: 380mm, Fits Tubing ID 3/8in, Length: 200, Standard Taper Joints: 29/42

Friedrich Condenser 29/42. Friedrich Condenser with Standard Taper Sidearm, Material: Borosilicate glass, USP Type I and ASTM E438, Type I, Class A requirements, Height: 330mm, Length: 225mm, Fits Tubing ID: 3/8in, Standard Taper Joints: 29/42

Bidwell-Sterling Moisture Test Distillation Receiver 5ml. Bidwell-Sterling Moisture Test Distillation Receiver, Borosilicate glass, USP Type I and ASTM E438, Type I, Class A requirements, Height: 275mm, Width: 90mm, Standard Taper Joints: 24/40, Size: 5ml

Boiling Flask, Extraction, Flat Bottom. 250mL capacity, with No. 8 stopper joint

Boiling Flask, Round Bottom, Short Neck. 1000mL capacity, with [ST] 24/40 outer joint.

Boiling Flask, Round Bottom, Short Neck. 250mL capacity, with [ST] 24/40 outer joint.

Boiling Flask, Round Bottom, Short Neck. 1000mL capacity, with [SJ] 35/25 socket joint.

Boiling Flask, Round Bottom, Short Neck. 3000mL capacity, with [ST] 24/40 outer joint.

Boiling Flask, Round Bottom, 2-Neck. 500mL capacity. Joint Sizes: Center Neck [ST] 24/40 outer; Vertical Side Neck: [ST] 24/40 outer. Round bottom two neck boiling flask with standard taper outer joints on both the center neck and the vertical side neck.

Boiling Flask, Recovery. 200mL capacity, with [ST] 24/40 outer joint. Upper portion of the flask has a gradual taper making it easier to remove reaction products. Lower hemisphere fits comparably sized heating mantles. Recommended for use with rotary evaporators.

Boiling Flask, Round Bottom, 3-Neck. 500mL capacity. Joint Sizes: Center Neck: [ST] 24/40; Vertical Side Necks: [ST] 24/40. Round bottom three neck boiling flask with standard taper joints on the center neck and the vertical side necks. The two side necks are 180 degrees apart.

Boiling Flask, Round Bottom, 4-Neck. 3000mL capacity. Joint Sizes: Center Neck:[ST] 45/50; Vertical Side Necks: [ST] 24/40. Round bottom four neck boiling flask with center neck and three vertical side necks that are 90 degrees apart.

Boiling Flask, Round Bottom, 3-Neck. 1000mL capacity. Joint Sizes: Center Neck: [ST] 24/40; Vertical Side Necks: [ST] 24/40. Round bottom three neck boiling flask with standard taper joints on the center neck and the vertical side necks. The two side necks are 180 degrees apart.

Boiling Flask, Round Bottom, 3-Neck. 12L capacity. Joint Sizes: Center Neck: [ST] 45/50; Vertical Side Necks: [ST] 24/40. Round bottom three neck boiling flask with standard taper joints on the center neck and the vertical side necks. The two side necks are 180 degrees apart.

Boiling Flask, Round Bottom, 4-Neck. 1000mL capacity. Joint Sizes: Center Neck:[ST] 34/45; Vertical Side Necks: [ST] 24/40. Round bottom four neck boiling flask with center neck and three vertical side necks that are 90 degrees apart.

Boiling Flask, Extraction, Flat Bottom. 100mL capacity, with No. 6 stopper joint

Boiling Flask, Round Bottom, 4-Neck. 5000mL capacity. Joint Sizes: Center Neck:[ST] 45/50; Vertical Side Necks: [ST] 24/40. Round bottom four neck boiling flask with center neck and three vertical side necks that are 90 degrees apart.

Boiling Flask, Round Bottom, 3-Neck. 250mL capacity. Joint Sizes: Center Neck: [ST] 24/40; Vertical Side Necks: [ST] 24/40. Round bottom three neck boiling flask with standard taper joints on the center neck and the vertical side necks. The two side necks are 180 degrees apart.

Boiling Flask, Recovery. 100mL capacity, with [ST] 24/40 outer joint. Upper portion of the flask has a gradual taper making it easier to remove reaction products. Lower hemisphere fits comparably sized heating mantles. Recommended for use with rotary evaporators.

Boiling Flask, Round Bottom, Short Neck. 50mL capacity, with [ST] 24/40 outer joint.

Boiling Flask, Round Bottom, Short Neck. 100mL capacity, with [ST] 24/40 outer joint.

Boiling Flask, Round Bottom, 3-Neck. 250mL capacity. Joint Sizes: Center Neck: [ST] 24/40; Angled Side Necks: [ST] 24/40. Round bottom three neck boiling flask with standard taper joints on all three necks. Side necks are 180 degrees apart and angled at 20 degrees to the vertical.

Boiling Flask, Round Bottom, Short Neck. 5000mL capacity, with [ST] 24/40 outer joint.

Boiling Flask, Round Bottom, 2-Neck. 1000mL capacity. Joint Sizes: Center Neck: [ST] 29/42 outer; Angeled Side Neck: [ST] 24/40 outer. Round bottom two neck boiling flask with standard taper outer joints on both necks. Side neck is angled 20 degrees to the center neck.

Boiling Flask, Round Bottom, Short Neck. 500mL capacity, with [ST] 24/40 outer joint.

Boiling Flask, Round Bottom, Short Neck. 200mL capacity, with [ST] 24/40 outer joint.

Flasks Erlenmeyer RAY-SORB Color-Coded PTFE [standard taper] Stopper. Capacity (mL); 50. [standard taper] Stopper; 19. Approx. Widest Dia. (mm); 50. Approx. Height (mm); 76 KIMAX flask RAY-SORB processed to protect solutions sensitive to light of the shorter wavelengths.

KIMAX Dissolution Test Vessel. Dissolution testing is used to evaluate drug bioavailability. The Kirchhoefer procedure of dissolution testing calls for use of a 1000mL, round-bottom vessel. Approximate vessel capacity: 1000mL. OD: 108mm. Height: 160mm.

Flasks Boiling Flat Bottom Short Neck with [standard taper] 24/40 Joint. Capacity (mL); 300. Approx. Height (mm); 135. Approx. O.D. (mm); 87 KIMAX boiling flask with a short [standard taper] joint neck. Designed from ASTM Specification E 1403, Type I, Class 4 requirements.

Extraction Flask Pickel. Approx. Height (mm); 133 KIMAX flask with three indentations that are evenly spaced to the center cap or thimble. Diameter at the top is closely controlled to insure a fit with metal condensers available from laboratory supply dealers.

Flasks Erlenmeyer GL 45 with Large Opening and Capacity Scale. Capacity (mL); 500. Approx. Widest Dia. (mm); 102. Approx. Widest Height with Cap. (mm); 165.

FLASK SHAKE DELONG NECK 2L - CLS-2036-08

FLASKSHAKE 6BAF GL45 2000ML - CLS-2052-10

KONTESbrand Stirrer Assembly. HI-VAC Stirrer Bearing Assembly Only, [Standard Taper] 24/40

KONTESbrand Flask. Single Neck flat bottom, heavy wall Capacity 250ml, (Standard Taper) Joint 45/50

Florence Boiling Flasks, 250 ml

Florence Boiling Flasks, 500 ml

Florence Boiling Flasks, 1000 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Narrow Neck - CH0402A, 25 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Narrow Neck - CH0402B, 50 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Narrow Neck - CH0402C, 100 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Narrow Neck - CH0402D, 150 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Narrow Neck - CH0402E, 250 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Narrow Neck - CH0402F, 500 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Narrow Neck - CH0402G, 1000 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Wide Neck - CH0403D, 500 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Wide Neck - CH0403E, 1000 ml

Eisco LabGlass® Boiling Flasks, Round Bottom, Wide Neck - CH0403F, 2000 ml

Eisco LabGlass® Pear Shape Boiling Flasks, Interchangable Joint - CH0406C, 100 ml

Eisco LabGlass® Pear Shape Boiling Flasks, Interchangable Joint - CH0406D, 250 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410A, 25 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410B, 50 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410C, 100 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410D, 150 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410E, 250 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410F, 500 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410G, 1000 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410H, 2000 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Narrow Neck - CH0410K, 6000 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Wide Neck - CH0411A, 50 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Wide Neck - CH0411B, 100 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Wide Neck - CH0411C, 250 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Wide Neck - CH0411D

Eisco LabGlass® Boiling Flasks, Flat Bottom, Wide Neck - CH0411E, 1000 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Wide Neck - CH0411F, 2000 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Interchangeable Joint - CH0412B01, 50 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Interchangeable Joint - CH0412B02, 50 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Interchangeable Joint - CH0412F, 250 ml

Eisco LabGlass® Boiling Flasks, Flat Bottom, Interchangeable Joint - CH0412I01, 500 ml

Synthware Vacuum/Inert Gas Double Manifold, Kemtech America - M111004, Manifold with Front-Left-Right and Rear-Left-Right 10 mm Hose Connections

VWR Erlenmeyer Flask 50ml. VWR Erlenmeyer Flask, with Screw Cap, is made from Polypropelene which is Autoclavable and comes with PTFE Liner, GL 24-410, Dimensions: 51 mm, Capacity: 50ml

VWR Erlenmeyer Flask 125ml. VWR Erlenmeyer Flask, with Screw Cap, is made from Polypropelene which is Autoclavable and comes with PTFE Liner, GL 24-410, Dimensions: 64 mm, Capacity: 125ml

VWR Erlenmeyer Flask 250ml. VWR Erlenmeyer Flask, with Screw Cap, is made from Polypropelene which is Autoclavable and comes with PTFE Liner, GL 28-410, Dimensions: 85 mm, Capacity: 250ml

VWR Erlenmeyer Flask 500ml. VWR Erlenmeyer Flask, with Screw Cap, is made from Polypropelene which is Autoclavable and comes with PTFE Liner, GL 38-430, Dimensions: 105 mm, Capacity: 500ml

VWR Erlenmeyer Flask 1000ml. VWR Erlenmeyer Flask, with Screw Cap, is made from Polypropelene which is Autoclavable and comes with PTFE Liner, GL 38-430, Dimensions: 131 mm, Capacity: 1000ml

Category