• 0
Shop Products $

PLATE CENTER - 61-8250C

STEEL BALL - 4-40-1200

STEEL BALL - 4-40-0600

GASKET WASHERS FOR 8851 - 41-3175

VALVE TOGGLE - 41-3119

ROTOR SET OIL PUMP - 41-3036

O-RING - 41-3005

SPRING VANE - 41-2996

LIP SEAL - 41-2988

LIP SEAL - 41-2977

SPRING EXHAUST VANE - 41-2972

GASKET FOR COVER - 41-2375

WASHER STEEL - 41-2363

GASKET VENTED EXHAUST COVER - 41-2291

SPRING COIL - 41-2256

VALVE PRESSURE RELEASE - 41-2161

VALVE SPRING FOR BLOCK - 41-2158

VALVE LOWER EXHAUST - 41-2154

VALVE UPPER EXHAUST - 41-2153

SHAFT - 41-2093

ROTOR - 41-2092

PULLEY FOR PUMP 1402 - 41-2074

SEAL ONLY 5/8 - 41-2068

PLATE END SMALL - 41-2045

RING EXHAUST - 41-2039

DISK THRUST FOR 1373 + 1380 - 41-1766

VALVE VENTED EXHAUST - 41-1736

AIR FILTER - 41-1692

RING HOLD - 41-1688

VANE LARGE METAL - 41-1684

ROTOR LARGE FOR 1376 - 41-1682

ROTOR FOR EXHAUST - 41-1518

GASKET FOR VALVE - 41-1508

O RING RUBBER FOR VALVE - 41-1507

CAP DUST FOR EXHAUST OUTLET - 41-1501

ROTOR SMALL - 41-1499

RING SMALL - 41-1497

GASKET FOR OIL CASE - 41-1496

GASKET FOR INTAKE CHAMBER - 41-1495

GASKET FOR SEAL HOLDER - 41-1494

PULLEY FOR PUMP - 41-1492

SPRING HOLDER FOR LARGE VANE - 41-1489

VANES SMALL - 41-1487

ROTOR LARGE - 41-1478

LARGE VANES - 41-1477

BRONZE BEARING FOR 41-1465 - 41-1467

WASHER STEEL FOR SHAFT COLLAR - 41-1285

VALVE CLOCK SPRING - 41-1239

RING RETAINING - 41-1150

WASHER FOR PLUG - 41-1137

SPRING HOLDER FOR VANES - 41-1063

SHAFT - 41-1060

VANES - 41-1059

WASHER ALUMINUM 1/32 V.E - 41-1056

GASKET FOR CASE - 41-1052

INTAKE CHAMBER - 41-1048

FRONT PLATE - 41-1045

INNER RING - 41-1042

ROTOR WITH BENT GROOVE - 41-1040

VENTED EXHAUST PLUG - 41-1039

VALVE PRESSURE RELIEF - 41-0992

WASHER ALUMINUM-INTAKE NIPPLE - 41-0961

VANES FOR ROTOR - 41-0959

FILTER SCREEN - 41-0937

LEG FOR PUMP BASE - 41-0929

VALVE UPPER EXHAUST - 41-0695

AIR FILTER - 41-0660

KEY FOR PUMP PULLEY - 41-0624

WOODRUFF KEYS FOR SHAFT - 41-0613

SEAL - 41-0578

WASHER - 41-0508

WASHER FOR INTAKE NIPPLE - 41-0491

GASKET FOR OIL CASE - 41-0403

PAPER GASKET INTAKE CHAMBER - 41-0383

GASKET INTAKE CHAMBER COVER - 41-0234

SPACER CLOCK SPRING F/ SHAFT - 41-0055

WASHER IRON FOR 1/4 BOLT - 2-61-3100

SCREW HX HD IRN CP 5/16-18 X 1 - 2-01-0316

SCREW HX HD IRN CP 5/16-18X3/4 - 2-01-0312

SCREW HEX HEAD 10-32 X 1 - 2-00-0716

SEALANT - 1-99-5282

SEAL REPLACEMENT FOR 1397 - 1401F

SEAL KIT FOR 5/8 SHAFT - 1401E

SEAL PKG TYPE FOR 3/4IN SHAFT - 1401D

BELT FOR 1399 - 1399A

PUMP HEAD L/S CYTO 3-ROLL TN - 77253-10

PUMP HEAD L/S EASY-LOAD-II CRS - 77202-50

CABLE EXTENSION F/ OHS - 77097-20

SPLY 85-264VAC50/60HZ20VDC 3A - XP0001

MS-CA1E/820/24V50HZ MOTOR NO CAP - ISM815

PRT SET MS-CA1E/6 WITHOUT MTR/FRNT - ISM267D

GR PMP GBP25.JKS.A.B1 Z200

DRIVE MFLEX L/S AIR-POWERED - 7569-00

REPL. CONTROLLER F/07557-00 - 7557-04

DRIVE MFLEX L/S 600RPM BRITISH 230V - 7555-05

DRIVE MFLEX L/S 600RPM ITALIAN 230V - 7555-05

DRIVE MFLEX L/S 600RPM INDIA 230V - 7555-05

DRIVE MFLEX L/S 600RPM ISRAEL 250 VAC - 7555-05

DRIVE MFLEX L/S 600RPM EUROPEAN 230V - 7555-05

DRIVE MFLEX L/S 600RPM DENMARK 230V - 7555-05

DRIVE MFLEX L/S 600RPM SWITZERLAND 230V - 7555-05

DRIVE MFLEX L/S 600RPM AUSTRALIA 230V - 7555-05

PUMP KIT ADAPT W/ 3 HEADS

DRIVE MFLEX L/S 600RPM BRITISH 230V - 7528-10

DRIVE MFLEX L/S 600RPM ITALIAN 230V - 7528-10

DRIVE MFLEX L/S 600RPM INDIA 230V - 7528-10

DRIVE MFLEX L/S 600RPM ISRAEL 250 VAC - 7528-10

DRIVE MFLEX L/S 600RPM EUROPEAN 230V - 7528-10

DRIVE MFLEX L/S 600RPM DENMARK 230V - 7528-10

DRIVE MFLEX L/S 600RPM SWITZERLAND 230V - 7528-10

DRIVE MFLEX L/S 600RPM AUSTRALIA 230V - 7528-10

CABLE ASSEMBLY DB25 25-FT - 7523-95, Cable assembly for remote control, DB25(M) connector

BVP STD BACK PLATE ASSEMBLY - ISM447

FOOTSWITCH F/FLOWMASTER PUMP - IS10279

Ultragrade 19 Vacuum Pump Oil, Edwards - H11025015, 1 L, Ultragrade 19 Vacuum Pump Oil with 355 °C Auto Ignition Point and -16° Pour Point

Replacement O-Rings for Centering Rings. For ISO size: NW25. Viton replacement O-ring. Length: 1.8cm.

Replacement O-Rings for Centering Rings. For ISO size: NW16. Nitrile replacement O-ring. Length: 1.8cm.

SPARE HEATER - H01707080

Active Vacuum Gauge Cable. Cable is required to connect active gauge display or active gauge controller to any active gauge head. Length: 5.0m.

ACTIVE CABLE 10FT - D40001030

Active Vacuum Gauge Cable. Cable is required to connect active gauge display or active gauge controller to any active gauge head. Length: 1.0m.

ACTIVE GAUGE CABLE 33FT(1/2M) - D40001005

Series CG16K Vacuum Dial Gauge. Easy-to-read linear scale, these vacuum gauges are barometrically independent, suitable for panel mounting or direct pipeline mounting via NW16 flange. Accuracy is +/-2% of full scale deflection. Maximum over-pressure: 2 atm absolute. Range: 0-1040 mbar.

CNTRL NEEDLE EXFINE LV10K - C37102000

MANUAL AIR ADMITTANCE VALVE - C35103000

SPEEDIVALVE SV25K 25MM - C33305000

VALVE PV40K - C31405000

BELLOWS SEALED VALVE PV25K25MM - C31305000

PVK Series Isolation Vacuum Valve. Manually operated vacuum valve with NW10 flange connection. Use to isolate vacuum pump from process. Highly reliable mechanism is isolated from the vacuum system and is suitable for full vacuum range of atmosphere to 1e-9 torr.

NITRILE SLEEVE NW25 - C26501004

NITRILE SLEEVE NW10 - C26501002

Short Flange. ISO size: NW40. Stainless steel.

REDUCING CROSS NW40/10 - C10516413

TEE NW40 - C10516411

Aluminum Elbow. ISO size NW40 aluminum elbow, 90[degree].

Clamping Ring. For ISO size: NW40. Preformed stainless steel vacuum clamp with a bolt and molded plastic thumbscrew. Clamp springs easily into position over the flange to hold joint together prior to clamping, allowing adjustment during assembly.

Centering Ring. For ISO size: NW40. Stainless steel centering ring supplied with nitrile O-ring. Length: 5.1cm.

Blank Flange. ISO size: NW40. Stainless steel.

REDUCING CROSS NW25/10 - C10514413

TEE NW25 - C10514411

Blank Flange. ISO size: NW25. Stainless steel.

Short Flange. ISO size: NW25. Stainless steel.

PIPE LINE FLEX NW25 250MM - C10514285

12mm Vacuum Hose Nozzle. Use for connecting flexible 12.7mm I.D. vacuum tubing to vacuum pumping systems. Includes flange joint fitting. For ISO size: NW10.

TEE NW10 ALUMINUM - C10511411

Aluminum Elbow. ISO size NW10 aluminum elbow, 90[degree].

Blank Flange. ISO size: NW10. Stainless steel.

Short Flange. ISO size: NW10. Stainless steel.

FLEXIBLE CONNECTOR NW10 - C10511286

ADAPTERS SS IS063/4 1/2INCF - C10007130

ADAPTERS SS IS063/NW25 - C10007115

INLET CO-SEAL NW40 - B27158453

OIL MIST FILTER ED12 - A50301000

D-Lab Diaphragm Pump Vacuum Controller. Accessory vacuum controller for use with all D-Lab Diaphragm vacuum pumps (100-120V). Provides control of system pressure and stops the diaphragm pump when a pre-set pressure is reached.

NPT Vacuum Gauge Adapter. Stainless steel adapter used to fit thermocouple vacuum gauge heads to system flange joints. Adapts 19mm NPT to NW25.

NPT Vacuum Gauge Adapter. Stainless steel adapter used to fit thermocouple vacuum gauge heads to system flange joints. Adapts 3.2mm NPT to NW10.

PUMP SOLV 20L-PP F/REIKE SPOUT - 695060-1, 1 each

ReCyclerâ„¢ Bulk Solvent Delivery System Components, MilliporeSigma - 691128-2, Tri Sure Metal Bung Adapter, 1/2 IN.

ReCyclerâ„¢ Bulk Solvent Delivery System Components, MilliporeSigma - 691127-2, QC Sampling Valve

ReCyclerâ„¢ Bulk Solvent Delivery System Components, MilliporeSigma - 691126-2, Jumper Hose Assembly

ReCyclerâ„¢ Bulk Solvent Delivery System Components, MilliporeSigma - 691125-2, Ambient Air Vent

ReCyclerâ„¢ Bulk Solvent Delivery System Components, MilliporeSigma - 691124-2, Solvent Line Quick Connect 1/4 IN. O.D. Compression Fitting

Glass Separator. 160 Ml; Replacement.

Vacuum Regulator And Manometer. For VACUUBRAND ME1C vacuum pump. Bleeder valve allows adjustment of vacuum level. Manometer is graduated from atmosphere to -1 bar, in graduations of 0.05 bar.

Vacuum Regulation Valve With Manometer. For VACUUBRAND ME1 vacuum pump. Bleeder valve allows adjustment of vacuum level. Manometer is graduated from atmosphere to -1 bar, in graduations of 0.05 bar.

T-Valve Assembly. With Manual Valve And T Fitting Used To Connect To Two Transfer Hoses To A Supply Tank.

Silicone Tubing. For connection of Hand Operator to Bottle. 180cm.

Tubing Set With Filter. Spinner Flask With 2 Pendula, 500 Ml

Tubing Set Vacusip. Spinner Flask With 2 Pendula, 250 Ml

Silicone Tubing. For connection of Hand Operator to Bottle. 70cm.

Tube Collar As Weight 4-6 Id. Stirring Platform (With 4 Stirring Positions) Incl. Control Cable

Tube Collar As Weight 1-3 Id. Control Unit Incl. Power Supply

Silicone Tubing 2.5M 3Mm Id. Tube Collar Used As A Weight For The Aspiration Tube Or As A Clamp Spacer For The Dispensing Tube, For Aspiration / Dispensing Tubes With 1 - 3 Mm Inner Diameter.

Lid Gl35 With Tube Fitting Pk2. Length 25 M (Bulk Roll), Autoclavable, Inner Diameter 2 Mm

Lid For 4L Bottle. Length 25 M (Bulk Roll), Autoclavable, Inner Diameter 1 Mm

Lid For 4L Bottle. Length 2.5 M, Autoclavable, Inner Diameter 8 Mm

Level Sensor Cable. Length 2.5 M, Autoclavable, Inner Diameter 4 Mm

Hand Operator Vacusip. Length 2.5 M, Autoclavable, Inner Diameter 2 Mm

Polypropylene Bottle with GL 45 lid, 500 mL. Single use. Pack of 10.

Bottle & Lid 4L Level Detection. For 4L Bottle, With Quick Couplings (Pvdf) + Level Detection

Bottle Stand. 4 Litres, Polypropylene

4L Polypropylene Bottle. To Operate Vacusip And Attach Adapters, Silicone

Bottle Handle. Green Lid Gl 45 With Tube Fittings (Pack Of 2)

Bottle Borosilicate 500 Ml. Integra Borosilicate Bottle With Standard Gl 45 Blue Lid, 500 Ml

Tube Aspiration/Dispensing 35Cm 6Mm Id. 8-Channel Adapter With Ejector For Griptips

Single-Channel Adapter. For Standard Tips and GRIPTIPS. Pack of 5.

8-Channel Adapter For Tips. Filter Sterile (Pore Size 0,45Um)

8-Channel Adapter For Griptips.

1-Channel Adapter For Tips. Pipette Mount, Green, Incl. O-Ring For Pipetboy Acu Classic And Transparent

1-Channel Adapter For Griptips. Pipette Mount, Grey, Incl. O-Ring For Pipetboy Acu Green, Blue, Red And Purple. Work Immediately.

Vacuubrand Mz2C Nt +Ak M + D Dry Diaphragm Vacuum System. Brandtech. 5 Torr (7 Mbar) Ultimate Vacuum, 38 Lpm (1.4 Cfm) Free Air Capacity. Ptfe Chemistry Vacuum Pump With Inlet Catchpot, Flow Control And Dial Gauge. 120V, 60Hz, C/Us Mark

Tubing For Use With Fta-1For Use With The Fta-1.

Flask, Glass For Fta-1Aspiration Flask For The Fta-1.

Diaphragm, Replacement Fkm.

Pump, Air / Vacuum 12Vdc.

Pump, Air / Vacuum 230V.

Pump, Air / Vacuum 115V.

8 Channel Tips For Ma-8 Adapter For Fta-1 Aspirator.

8 Channel Adapter Manifold For Fta-1 Aspirator.

Aspirator Filter Pumps, Humboldt Manufacturing - H-12020, Nickel-Plated for Greater Air Entrainment Capacity

Vacuubrand Oil Mist Filter Fo, Brandtech. Reduces oil-mist emission from pump outlet. fits re9 and rz9 models

Vacuubrand Inlet Catchpot Ak, Brandtech. Helps protect pump from ingesting liquids and particulates. fits re9 and rz9 models.

Vacuubrand Inlet Catchpot Ak, Brandtech. Helps protect pump from ingesting liquids and particulates. fits re6, rz6 and rc6 models.

Vacuubrand Oil Mist Filter Fo, Brandtech. Reduces oil-mist emission from pump outlet. fits re/rz2.5 and re/z6 models

Vacuubrand Inlet Catchpot Ak, Brandtech. Helps protect pump from ingesting liquids and particulates. fits re2.5 and rz2.5 models.

Vacuubrand Pump Oil B, 5 Liter, Brandtech. Specially formulated for use with vacuubrand rotary vane and hybrid pumps.

Vacuubrand Pump Oil B, 1 Liter, Brandtech. Specially formulated for use with vacuubrand rotary vane and hybrid pumps.

Vacuubrand 19Mm Hose Barb, Brandtech. Adapts kf25 small flange to a 19mm (3/4) hose barb. aluminum

Vacuubrand 12Mm Hose Barb, Brandtech. Adapts kf25 small flange to a 12mm (1/2) hose barb. aluminum

Vacuubrand 10Mm Hose Barb, Brandtech. Adapts kf16 small flange to a 10mm (3/8) hose barb. aluminum

Vacuubrand Power Cord, Us, Brandtech. Grounded (three-wire) us plug with female iec end. 2 meters in length.

VACUSAFE Filter. Hydrophobic membrane filter, non-sterile, 60mm, 0.45um.

FIRESTONE VALVE, #15 O-RING JOINT CONNECTION TO SYSTEM.

DOUBLE TUBE VACUUM MANIFOLD, 730MM LONG, (4) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 730MM LONG, (4) STOPCOCK PORTS WITH #15 O-RING JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 730MM LONG, (4) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 710MM LONG, (4) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 710MM LONG, (4) STOPCOCK PORTS WITH #15 O-RING JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 710MM LONG, (4) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 520MM LONG, (3) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 520MM LONG, (3) STOPCOCK PORTS WITH #15 O-RING JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 520MM LONG, (3) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 500MM LONG, (3) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 500MM LONG, (3) STOPCOCK PORTS WITH #15 O-RING JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 500MM LONG, (3) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 455MM LONG, (4) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 455MM LONG, (4) STOPCOCK PORTS WITH #15 O-RING JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 455MM LONG, (4) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 355MM LONG, (3) STOPCOCK PORTS WITH 24/40 INNER JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 355MM LONG, (3) STOPCOCK PORTS WITH #15 O-RING JOINTS.

DOUBLE TUBE VACUUM MANIFOLD, 355MM LONG, (3) STOPCOCK PORTS WITH 14/20 INNER JOINTS.

14035 PUMP OIL, Hyvac Light. 5 GALLONS PUMP OIL.

14035 PUMP OIL, Hyvac Light. 1 GALLON PUMP OIL.

14035 PUMP OIL, Hyvac Light. 1 QUART PUMP OIL.

13385 GAUGE, Pressure. 0-60psi 1/8MPT STAINLESS STEEL GAUGE PRESSURE, 1.5 DIAL.

13385 GAUGE, Pressure. 316SS PRESSURE GAUGE.

13385 GAUGE, Pressure. BRASS PRESSURE GAUGE.

13385 GAUGE, Pressure. ADAPTER NYLON.

13385 GAUGE, Pressure. 0-60psi 1/4MPT BRS GAUGE 2.5 DIAL, BRASS.

13268 PUMP, Bellows Metering. 409.5ML/MIN METERING PUMP 1 1/2.

8774 CHECK VALVE. CHECK VALVE.

8770 CHECK VALVE. CHECK VALVE ANGLED.

8770 CHECK VALVE. CHECK VALVE STRAIGHT.

8769 VALVE, Pressure Release, Automatic. VALVE RELEASE W/WHISTLE TO BE SEALED BY GLSBLWR.

8769 VALVE, Pressure Release, Automatic. VALVE RELEASE WITHOUT WHISTLE USED WITH BUSHING.

8769 VALVE, Pressure Release, Automatic. VALVE RELEASE WITHOUT WHISTLE TO BE SEALED BY GLSBLWR.

8768 VALVE, Vacuum Release. VALVE VACUUM RELEASE.

8767 Valve, pressure relief, adjustable. 50-150 PSI ADJ 1/4 VALVE PRESSURE RELIEF.

8767 Valve, pressure relief, adjustable. 3-50 PSI ADJ 1/4 VALVE PRESSURE RELIEF.

8766 VALVE, Rapid Purge, Firestone. FIRESTONE VALVE, HOSE CONNECTION TO SYSTEM.

7624 SEALING RING, for GL Thread, with RUBBER SEAL. GL 14 SILICONE SEALING RING, FITS 5.5-6.5MM OD TUBING.

Gold Vacuum Pump Oil, 1Gal. Gold oil is a double distilled synthetic hydrocarbon oil that has no aromatic compounds or sulfur. Gold oil will offer longer life and superior protection for the internal components in corrosive pumping applications. 1 Gallon.

Gold Vacuum Pump Oil, 1L. Gold oil is a double distilled synthetic hydrocarbon oil that has no aromatic compounds or sulfur. Gold oil will offer longer life and superior protection for the internal components in corrosive pumping applications. 1 Liter

Premium Vacuum Pump Oil, 1Gal. The Premium oil is a triple distilled hydrocarbon oil resistant to breakdown at the high RPM of direct drive pumps. 1 Gallon.

Premium Vacuum Pump Oil, 1L. The Premium oil is a triple distilled hydrocarbon oil resistant to breakdown at the high RPM of direct drive pumps. 1 Liter.

Duo-Seal Vacuum Pump Oil, 5Gal. The Duo-Seal oil is for use with belt driven (low RPM) AF-0350 pumps. 5 Gallons.

Duo-Seal Vacuum Pump Oil, 1Gal. The Duo-Seal oil is for use with belt driven (low RPM) AF-0350 pumps. 1 Gallon.

Duo-Seal Vacuum Pump Oil, 1QT. The Duo-Seal oil is for use with belt driven (low RPM) AF-0350 pumps. 1 Quart.

Replacement SS Bushing. #303 Stainless steel bushing, GL 25, Replacement for Thermocouple Gauge Adapter, Airfree (AF-0306)

Thermocouple Gauge Adapter, Airfree.. Chem-Vac Chem-Cap valve with a #30 o-ring joint for connection to the right hand side of AF-0300-03 vacuum manifold.

Thermocouple Gauge Adapter, Airfree.. Chem-Vac Chem-Cap valve with a #25 o-ring joint for connection to the right hand side of AF-0300-03 vacuum manifold.

Thermocouple Gauge Adapter, Airfree.. Chem-Vac Chem-Cap valve with a #15 o-ring joint for connection to the right hand side of AF-0300-03 vacuum manifold.

Digital vacuum gauge. analog style screen. Transducer is made of corrosion- resistant ceramic. Measures absolute pressures from atmosphere to 1mbar/torr/hectopascal. User selected units. Powered by 9 volt lith battery(supplied) with adjustable sleep timer for long battery life.

Equal Barb Tee Tubing Connector. Size: 4.8mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

Equal Barb Tee Tubing Connector. Size: 3.2mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

Equal Barb Tee Tubing Connector. Size: 1.6mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

Reduction Coupler Tubing Connector. Size: 6.4x4.8mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

Reduction Coupler Tubing Connector. Size: 1.6x3.2mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

Reduction Coupler Tubing Connector. Size: 3.2x1.6mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

Equal Leg Coupler Tubing Connector. Size: 4.8mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

Equal Leg Coupler Tubing Connector. Size: 3.2mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

Equal Leg Coupler Tubing Connector. Size: 1.6mm. Chemical-resistant HDPE tubing connectors for Welch Peristaltic Pump Systems (84009-696, -698, -700, -702). No tools are required to connect tubing connectors to pumps.

PVC Tubing. Length: 3m. O.D.: 4.8mm. High-performance material with great versatility and moderate chemical resistance. For use with the Welch Peristaltic Pump Systems (84009-696, -698, -700, -702).

PVC Tubing. Length: 3m. O.D.: 3.2mm. High-performance material with great versatility and moderate chemical resistance. For use with the Welch Peristaltic Pump Systems (84009-696, -698, -700, -702).

Silicone Tubing. Length: 3m. O.D.: 3.2mm. Flexible, translucent material with good chemical and environmental resistance and very good electrical resistance. For use with the Welch Peristaltic Pump Systems (84009-696, -698, -700, -702).

Silicone Tubing. Length: 3m. O.D.: 1.6mm. Flexible, translucent material with good chemical and environmental resistance and very good electrical resistance. For use with the Welch Peristaltic Pump Systems (84009-696, -698, -700, -702).

PVC Tubing Cartridge. O.D.: 4.8mm. High-performance material with great versatility and moderate chemical resistance. For use with the Welch Peristaltic Pump Systems (84009-696, -698, -700, -702).

PVC Tubing Cartridge. O.D.: 3.2mm. High-performance material with great versatility and moderate chemical resistance. For use with the Welch Peristaltic Pump Systems (84009-696, -698, -700, -702).

PVC Tubing Cartridge. O.D.: 1.6mm. High-performance material with great versatility and moderate chemical resistance. For use with the Welch Peristaltic Pump Systems (84009-696, -698, -700, -702).

Silicone Tubing Cartridge. O.D.: 3.2mm. Flexible, translucent material with good chemical and environmental resistance and very good electrical resistance. For use with the Welch Peristaltic Pump Systems (84009-696, -698, -700, -702).

CANISTER F/VACUUM PUMP - AA132

Adapter for Pump Head. For use with pump heads VWR# 82020-116, -118, and -120. An accessory for PD Pump Systems.

REPLACEMENTALUMINA OIL FLTR1EA - 7793800

Carboy Caddy. Holds up to 163kg. Low platform height for transporting carboys, jugs and large reagent bottles. Frame is 18-gauge tubular steel. Hard rubber 7.6cm diameter casters. Melamine laminate platform surface. Dimensions: 51Lx60Wx98Hcm. Shipping Weight: 9.5kg.

Flexi-Bin Cart. with 4 deep polyethylene bin; (3) 20.25 & (4) 15.25 dividers; bottom open shelf; 4 diameter casters, 2 with toe locks; full factory assembly; extruded rubber handle grips; durable epoxy-coated 18 gauge welded tubular steel frame; supports 400 lbs.; lifetime guarantee.

Welch® Barbed Tubing Connectors - 3551K-51, 1.6 mm ( 1/16 IN.), Equal Leg Coupler

Variable Footswitch. With IEC connections for hands free on/off pump operation. No adapters or special connection needed, plugs directly between the IEC and line cord connections.

Variable Footswitch. For hands free on/off pump operation. No adapters or special connection needed, plugs directly into the power source outlet. 115V, 60Hz only.

CHEMVAC® High Vacuum Valve, Chemglass - CG-960-01, High Vacuum Valve

VACUUBRAND® Service Kit for MZ2C Chemistry-Design Pump, BrandTech - 20696814, Service Kit for VACUUBRAND® MZ2C

Accessories for Direct Drive Pumps - 1416H, Exhaust Oil Recycler for Models 8905, 8910

ISO NW Inlet/Exhaust Connector, Welch - 1393F, Inlet/Exhaust Connector

DIGITAL VACUUM REGULATOR. vacuum. Optional Accessories. Stainless Steel Needle Valve. Model DVR-200 from J-KEM features digital pressure entry and display, no mercury, 100% solid state, and all stainless steel wetted parts to resist organic solvents, acids, bases, and water.

DIGITAL VACUUM REGULATOR. vacuum. Digital Vacuum Regulator. Digital Vacuum Regulator, 120 VAC. Model DVR-200 from J-KEM features digital pressure entry and display, no mercury, 100% solid state, and all stainless steel wetted parts to resist organic solvents, acids, bases, and water.

PLATE MOUNTING FOR PUMP 180MP-1 - 180MP-1G

HOLDER TRIPOD FOR PUMP 180MP-1 - 180MP-1F

SWITCH FOOT FOR PUMP 180MP-1 - 180MP-1B

PUMP DIAPHRAGM LABORATORY - 180MP-1

Proportional Voltage Controller, Ace Glass - 12338-10, Voltage Controller, 4×4×5 IN.

ALUMINUM CLAMP NW40 F/CENTERING RING - 12198-44, NW40 flange, Clamp

CENTERING RING NW40 SILICONE O-RING - 12198-41, NW40 flange, Gasket with silicone O-ring

CENTERING RING NW40 VITON O-RING - 12198-40, NW40 flange, Gasket with viton O-ring

ALUMINUM CLAMP NW25 F/CENTERING RING - 12198-29, NW25 flange, Clamp

CENTERING RING NW25 SILICONE O-RING - 12198-26, NW25 flange, Gasket with silicone O-ring

CENTERING RING NW25 VITON O-RING - 12198-25, NW25 flange, Gasket with viton O-ring

ALUMINUM CLAMP NW10/16 F/CENTERING RING - 12198-14, NW10/16 flange, Clamp

CENTERING RING NW10/16 VITON O-RING - 12198-10, NW10/16 flange, Gasket with viton O-ring

Accessories for VACUUBRAND® VACUU•PURE® Oil-Free Vacuum Pumps, BrandTech - 20662808, Polypropylene flange KF 25 with hose nozzle, 15 mm

Accessories for VACUUBRAND® VACUU•PURE® Oil-Free Vacuum Pumps, BrandTech - 20686033, PTFE Anti-static tubing with KF 25 flange fittings, 1 meter

Accessories for VACUUBRAND® VACUU•PURE® Oil-Free Vacuum Pumps, BrandTech - 20751801, Exhaust vapor condenser EK 600 for VACUU•PURE® (requires shuttle)

Accessories for VACUUBRAND® VACUU•PURE® Oil-Free Vacuum Pumps, BrandTech - 20751802, Inlet catchpot AK with flask for VACUU•PURE®

Accessories for VACUUBRAND® VACUU•PURE® Oil-Free Vacuum Pumps, BrandTech - 20751800, VACUU•PURE® shuttle - required for use with EK 600

VACUUM PUMP EXHAUST FILTER W/ ADAPTER - 96001

REPLACEMENT FILTER ELEMENT FILTER 0.3 UM - 1417H-01

FILTER EXHAUST WITH COALESCED OIL NW 25 - 1417F

VC 10 Vacuum controller. VC 10 Universal vacuum controller for a two-point calibration of multiple vacuum sources. High-resolution TFT display ensures intuitive operation and navigation, Vacuum sensor type: ceramic Al2O3, Voltage: 100 - 240 V, Dimensions:

VC 10.400 Stand, This accessory is used to place the VC 10 vacuum controller on a lab bench at a perfect reading angle, Permissible ambient temperature5 - 40 deg, Diameter: 16 mm, Dimensions: 100 x 175 x 160 mm

Vacuum Controller T-Piece/ Kf16 Flange. VACUUBRAND VACUU.SELECT Vacuum controller for the fine vacuum range, Includes VACUU-VIEW extended gauge, solenoid valve, T-piece and KF16 flange connections, 100-230 V / 50-60 Hz power supply, US/CEE/CH/UK/AUS

Vacuum Controller Us/Cee/Ch/Uk/Aus. Vacuum controller, With integrated solenoid valve and benchtop stand, Touchscreen control, 100-230 V / 50-60 Hz power supply, Jogwheel interface, Storage of ten multi-step programs, Graphic display of performance, Bidirectional RS232 interface, US/CEE/CH/UK/AUS

Vacuum Controller T-Piece/ Kf25 Flange. VACUUBRAND VACUU.SELECT vacuum controller for the fine vacuum range, Includes VACUU-VIEW extended gauge, solenoid valve, T-piece and KF25 flange connections, 100-230 V / 50-60 Hz power supply, US/CEE/CH/UK/AUS

TANK ASSEMBLY BOTTLE PRESSURE 0-30PSI - PVA-5LTUV

Aquasyn Diaphragms, Holland Applied Technologies - D12E, 3/4 IN.

Exhaust Hose, Precision Valve & Automation (PVA) - HOSE-5-FX8-10, Exhaust Hose, Solid Plastic Style

WELCHNET Union, PVDF Compression Fitting for 10 mm OD tubing, 10x10mm.

WELCHNET Union Tee, PVDF Compression Fitting for 10 mm OD tubing, 10x01x10mm.

PVC Hose for potable water to condenser, 8 mm ID, 5 m (16 ft)length.

Centering ring rubber O-ring - ISO Fittings, For use with Stainless steel centering ring, Replaceable Fluoroelastomer O-ring seal

Oil Mist Separator, NW16 Connections.

Replacement filter, for Inlet condenser.

Inlet condendsor, for rotary vane vacuum pumps, NW16 Connections.

Inland 19 Ultra - 1 Gallon Bottle. Inland 19 replaces Inland 15, Provide a decade improvement in pumping efficiency, Direct replacement for Adixen 100, Adixen 101, Adixen VP-1, Adixen AE-1, Edwards 15, Edwards 16, Edwards 19, Welch Duo Seal, and other rough pump oils, Size: 1 Gallon Bottle

Inland 15 Ultra - 1 Gallon Bottle.

Adjustable Gas Ballast Oil Return Kit for Labconco Rotary Vane Vacuum Pumps. Returns oil from exhaust filter housing to pump. Needed when pump is run with the gas ballast open for extended periods of time

Silencer for Labconco Scroll Vacuum Pumps combines filtration efficiency with noise reduction. Prevents tip seal dust from contaminating environment. Silences irritating pump exhaust noise. Sound absorbent element is replaceable

Filter Pump Coupling. For use with Aspirator Filter Pumps with 9.5mm NPT thread. Brass construction.

COUPLING 3/8IN HBT H-12195 - H-12195

WD RG GAUG DN40CF ATM 10E9MBAR - D14703000

Vacuum Tubing Clamp. 20.6mm clamp for vacuum tubing (55009-054).

Vacuum Tubing Clamp. 15.8mm clamp for vacuum tubing (55009-052).

Synthetic Zeolite Element for Molecular Traps. For molecular traps 55009-272, -274.

Rubber Hose Adapter. Converts Iso Nw Connection To A Hose Fitting. Made Of Aluminum. Iso Size: Nw16. Hose I.D.: 15.8Mm. 1.6Wx4.2Lcm.

Reducer. 14mm ID reducer, used to mate two different sizes of ISO flanges. Made of stainless steel. Joins ISO NW25 to NW16.

90[degree] Elbow. Stainless steel. For use with Welch vacuum pumps. ISO size: NW16. Flange size: 38.1mm.

Male Pipe Adapter. Compatible with Thermocouple vacuum gauges 55008-186, 55008-189 and other gauges. Made of stainless steel. ISO size: NW16. NPT: 6.35mm. Shank: 7.1mm.

Tee. Stainless steel. For use with Welch vacuum pumps. ISO size: NW25. Flange size: 51.8mm.

Tee. Stainless steel. For use with Welch vacuum pumps. ISO size: NW16. Flange size: 38.1mm.

Blank-Off Flange. To close off unused pump parts. Stainless steel. For use with Welch vacuum pumps. ISO Size: NW16.

BLANK OFF FLANGE NW25 - 388102

Reducer. 22.9mm ID reducer, used to mate two different sizes of ISO flanges. Made of stainless steel. Joins ISO NW40 to NW25.

Female Pipe Adapter. Compatible with Thermocouple vacuum gauges 55008-186, 55008-189 and other gauges. Made of stainless steel. ISO size: NW16. NPT: 6.4mm. Shank: 15.7mm.

Female Pipe Adapter. Compatible with Thermocouple vacuum gauges 55008-186, 55008-189 and other gauges. Made of stainless steel. ISO size: NW25. NPT: 6.4mm. Shank: 22.4mm.

90[degree] Elbow. Stainless steel. For use with Welch vacuum pumps. ISO size: NW25. Flange size: 51.8mm.

Vacuum Tubing Clamp. 11.1mm clamp for vacuum tubing (55009-050).

Rubber Hose Adapter. Converts ISO NW connection to a hose fitting. Made of aluminum. ISO size: NW40. Hose I.D.: 41.3mm. 4.1Wx5.5Lcm.

Female Pipe Adapter. Compatible with Thermocouple vacuum gauges 55008-186, 55008-189 and other gauges. Made of stainless steel. ISO size: NW25. NPT: 12.7mm. Shank: 22.4mm.

REPLACEMENT VITON O-RING NW40 - 304803

Rubber Hose Adapter. Converts ISO NW connection to a hose fitting. Made of aluminum. ISO size: NW16. Hose I.D.: 11.1mm. 1.6Wx4.2Lcm.

Stainless Steel Element for Coaxial Trap. For coaxial trap 55009-138.

O-RING VITON NW25 REPLACEMENT - 304802

Rubber Hose Adapter. Converts ISO NW connection to a hose fitting. Made of aluminum. ISO size: NW25. Hose I.D.: 20.6mm. 2.2Wx4.4Lcm.

Centering Ring Assembly. 40mm ID, stainless steel centering ring with replaceable Viton O-ring. Use to 150[degree]C sustained, 200[degree]C intermittent. ISO size: NW40.

Hinged Clamp. 66mm OD aluminum hinged clamp. Closure by wing nut and bolt. ISO size: NW40. Length: 94.9mm.

Hinged Clamp. 49.5mm OD aluminum hinged clamp. Closure by wing nut and bolt. ISO size: NW25. Length: 75.3mm.

Centering Ring Assembly. 25mm ID, stainless steel centering ring with replaceable Viton O-ring. Use to 150[degree]C sustained, 200[degree]C intermittent. ISO size: NW25.

Vacuum Tubing. Red rubber vacuum tubing. Supplied in 1.5m length. Tubing I.D.: 41.2mm.

Centering Ring Assembly. 16mm ID, stainless steel centering ring with replaceable Viton O-ring. Use to 150[degree]C sustained, 200[degree]C intermittent. ISO size: NW16.

V-Belt Kit. Replacement kit for the v-belt in DUOSEAL Single-Stage Belt-Drive Vacuum Pumps, Model 1400 (54974-238, -247, -262, and 54970-604).

Vacuum Tubing. Red rubber vacuum tubing. Supplied in 1.5m length. Tubing I.D.: 20.6mm.

Vacuum Tubing. Red rubber vacuum tubing. Supplied in 1.5m length. Tubing I.D.: 15.8mm.

Vacuum Tubing. Red rubber vacuum tubing. Supplied in 1.5m length. Tubing I.D.: 11.1mm.

V-Belt Kit. Replacement kit for the v-belt in DUOSEAL Single-Stage Belt-Drive Vacuum Pumps, Model 1400 (54973-075, -087, -084, -213, -133, and 54970-602).

V-Belt Kit. Replacement kit for the v-belt in DUOSEAL Single-Stage Belt-Drive Vacuum Pumps, Model 1397 (54993-345, -360, -366, and 54970-610).

Single Station Thermocouple Gauge Tube. Replacement gauge tube for use with Single Station Thermocouple Vacuum Gauge (55008-180).

Belt Guard and Base Kit. Belt guard and base kit for unmounted DUOSEAL Single-Stage Belt-Drive Vacuum Pumps, Models 1374 (54993-502) and 1397 (54993-342).

Dry Ice Cold Trap. Removable 2.8L center well for dry ice/alcohol slurry (not acetone). Visible trapping surface. Maintains cold up to 12 hours depending on vapor load. ISO size: 1.27cm ID hose. Use with models 1399, 1400, 1405, 8804, 8890, 1399, 8905, 8907, 8912, 8917, 8920, 8925. 25.4Hx30.5Dcm.

Replacement Element. Replacement element for Hermetically Sealed Oil Mist Eliminator (54994-094).

Replacement Element. Replacement element for use with exhaust filter (55007-042).

Replacement Element. Replacement element for use with exhaust filters 55007-020 and 14227-676.

Replacement Element. Replacement element for use with exhaust filter (55007-009).

Exhaust Filter. Exhaust filters trap exhaust oil mist and reduce pump noise. Supplied with housing and element. For use with Models 1397 and 1374.

Exhaust Filter. Exhaust filter traps exhaust oil mist and reduce pump noise. Supplied with housing and element. For use with Welch pump models 8917, 8920, 8925, 1405, 1402, 1376, and 1380.

Vacuum Pump Exhaust Filter. Exhaust filters trap exhaust oil mist and reduce pump noise. Supplied with housing and element. For use with Welch pump models 1400, 1399, 8905 and 8890.

Premium Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Designed to resist breakdown at higher rpms and operating temperatures of direct-drive vacuum pumps. 208L.

Premium Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Designed to resist breakdown at higher rpms and operating temperatures of direct-drive vacuum pumps. 19L.

Premium Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Designed to resist breakdown at higher rpms and operating temperatures of direct-drive vacuum pumps. 3.78L.

Premium Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Designed to resist breakdown at higher rpms and operating temperatures of direct-drive vacuum pumps. 1L.

DUOSEAL Pump Oil. Recommended for use with DUOSEAL Vacuum Pumps. Features low vapor pressure, chemical stability, ideal viscosity and no additives or inhibitors. 208L.

DUOSEAL Pump Oil. Recommended for use with DUOSEAL Vacuum Pumps. Features low vapor pressure, chemical stability, ideal viscosity and no additives or inhibitors. 18.9L.

DUOSEAL Pump Oil. Recommended for use with DUOSEAL Vacuum Pumps. Features low vapor pressure, chemical stability, ideal viscosity and no additives or inhibitors. 0.95L.

Hermetically Sealed Oil Mist Eliminator. An accessory for Welch Vacuum Pumps. Prevents corrosive vacuum pump exhaust gases from escaping into rooms. Coalesces pump mist from exhaust and allows it to drain back into the pump. Accepts 20.6mm I.D. hose. 12.7Wx19.7Hcm.

Acid Neutralization Trap. An accessory for CHEMSTAR Vacuum Pumps 54994-052 and 54993-550. NW25 ISO SW flange connection. Capacity: To 340L/minute.

Pump Adapter Kit for Oil Mist Eliminator. An accessory for CHEMSTAR Vacuum Pumps 54994-052 and 54993-550.

Pump Adapter Kit for Oil Mist Eliminator. An accessory for CHEMSTAR Vacuum Pump (54994-050).

RETROFIT KIT FOR 1376N-01 - 1376N

Replacement Element. An accessory for Acid Neutralization Trap (54994-090). Calcium hydroxide element. Element changes from white to bluish-transparent when spent.

Replacement Element. An accessory for Direct Drive High Vacuum Pump, Model 8917 (55009-088).

Gold Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Synthetic oil designed for excellent resistance when pumping corrosive gases or vapors. 19L.

Gold Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Synthetic oil designed for excellent resistance when pumping corrosive gases or vapors. 3.78L.

Gold Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Synthetic oil designed for excellent resistance when pumping corrosive gases or vapors. 1L.

KITSHFT SL RPLCMNT F 55009-088 - 8917K-03

Maintenace and REPAIR KIT, MINOR, for Precision Direct Drive Vacuum Pump Models DD1420 and P1420

Maintenace and REPAIR KIT, MAJOR, for Precision Direct Drive Vacuum Pump Models DDC100 and PC100

Maintenace and REPAIR KIT, MAJOR, for Precision Direct Drive Vacuum Pump Models DD420 and P420

MAINTENANCE KIT, DD90

Smoke Eliminator. Traps smoke and oil mist caused by high pressure operation at the pump exhaust port. Condensed oil is returned to the pump as pressure reduces. For use with model number D-75 and D-150.

Vacuum Pump Plate. Made from 1.3cm steel plate and is nickel plated for corrosion resistance. 26.7cm outside diamter. Accomadate jars up to 8.9 inch diameter. Comes with a hose barb, which is 9.5mm, an attached vacuum release valve and a rubber gasket for a tight seal.

Lubricating Oil. 32oz. Accessory for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

Muffler Assembly. 10u. 6.4mm NPT. Replacement muffler assembly for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

Muffler Assembly. 10u. 6.4mm NPT. Replacement muffler assembly for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

Vacuum Trap Assembly. Accessory for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

LIQUID END ASSEMBLY F/A/AA/B - 1395

GEM Vacuum Pump Vacuum Regulator. Accessory vacuum regulator for rotary evaporators. For use with GEM vacuum pumps and systems (54970-500, -505, -614, -616, -658).

Hose Adapter Kit. For use with Welch vacuum pumps, models 1402, 1380, 8907, 8912, 8917, 8920, 8925. With 1.5m of thick-walled rubber vacuum hose. Pump Inlet O.D.: 20.6mm. Appliance connector O.D.: 6.35mm and 9.5mm.

Hose Adapter Kit. For use with Welch vacuum pumps, models 1400, 1405, 1399, 8905. With 1.5m of thick-walled rubber vacuum hose. Pump Inlet O.D.: 11.1mm. Appliance connector O.D.: 6.35mm and 9.5mm.

Level detection sensor cable, for Safely Handling Biological Fluids, used to connect sensor.

Lid for Polyproplene Bottle with quick release couplings/level detection sensor.

Tubing Set with Filter, for safely handling biological fluid.

Clean and Overhaul Kit. For RV Dual-Mode, Direct Drive Vacuum Pumps. Contains all the springs, gaskets, seals, and other components required for routine maintenance and whenever the pump is dismantled.

PUMP REBUILD KIT PILOT5000 - TLD5000K-03

PUMP REBUILD KIT PILOT3000 - TLD3000K-03

PUMP PILOT PRESSURE REGULATOR KIT - TLD3500K-06

PUMP REPLACEMENT DIAPHRAGM PILOT5000 - TLD5000K-01

PUMP REPLACEMENT DIAPHRAGM PILOT3000 - TLD3000K-01

PUMP PILOT SERVICE KIT REPLACEMENT FEET - TLD2500K-04

PUMP PILOT VACUUM REGULATOR KIT - TLD3500K-05

Mist Eliminator. Oil Mist Eliminator with Pump Connection, Eliminates smoke from high vacuum pump exhaust by removing oil mists. Features a durable nylon guard, protects the working environment, reduces noise levels, temperature resistant up to 121C, and retention efficiency of 99.9% at 0.1mm

Vacuum Pump with Belt Guard - 1400B-01, Vacuum Pump with Belt Guard

Hand Vacuum Pump - HAP001, Hand Vacuum Pump

Universal Vacuum Plate - GA-001, Plate, Universal Vacuum

GAUGE PRES. VACUUM SS 0-15 PSI - CG-3002-K-85

GAUGE PRESSURE SS 0-15 PSI - CG-3002-K-80

FLOW CONTROL 1000PSI - 454-467896

Dry Ice Trap. 400mL. Glass body and Plexiglas lid. Recommended as a pre-trap to collect liquids and reduce processing time when used with LABOPORT Oil-free Vacuum Pumps in gel drying, vacuum concentrating, and vacuum ovens. Trap should be placed before pump for maximum efficiency.

Cartridge. Replacement charcoal cartridge for use with charcoal solvent trap (26673-360).

Cartridge. Replacement soda acid cartridge for use with soda acid solvent trap (26673-358).

Filer Cartridge. Replacement inlet filter cartridge for 26671-506.

Inlet Filter. Disposable filter prevents oil back-streaming from vacuum pump and protects the pump from damage from submicron particles. Includes filter assembly and one filter cartridge. Life is approximately 1,000 hours at 10 microns vacuum.

Vacuum Tubing Kit. For vacuum desiccator cabinet. Includes two 1.22m tubes, inner diameters of 6.35mm and 12.7mm. 2 each 6.35mm and 12.7mm tubing clamps. 6.35mm to 12.7mm barbed reducer.

Swagelok GC Gas Fitting, Brass Tube Reducer. 3.2x6.4mm Brass Tube Reducer.

Maintained On/Off Foot Switch. For hands-free operation of Welch WOB-L, DryFast, DryFast Ultra Dry Vacuum and Peristaltic Pumps. Made of durable black painted steel. Nonskid base and foot treadle pads ensure secure footing during repeated operations. Ready once plugged. 2.4m cord. 115V, 60Hz.

Exhaust Filter Oil Mist Eliminator. Inlet connection: 19.1mm. Outlet connection: 12.7mm. For use with Welch vacuum pumps.

Minor Repair Kit. Includes minor part such as gasket, air filter, pulley key, spring holder, and O-rings necessary to repair Welch DUOSEAL Two-Stage Belt-Drive Vacuum Pumps (54973-133).

Exhaust Filter. Exhaust filters trap exhaust oil mist and reduce pump noise. Supplied with housing and element. For use with Welch pump models 8920, 8925, 1376, 1380, 1402, and 1405.

PUMP SPARE PARTS KIT - 074178

PUMP SPARE PARTS KIT - 072839

PUMP SPARE PARTS KIT - 072838

PUMP SPARE PARTS KIT - 075097

Spare Parts Kit. Spare parts kit for LABOPORT Oil-Free Vacuum Pumps, Single-Stage and Two-Stage models UN840FTP and UN842.

Spare Parts Kit. Spare parts kit for LABOPORT Oil-Free Vacuum Pumps, UN820 models.

PUMP SPARE PARTS KIT - 072778

Rotavac Valve Control. For use with Laborota 4000, 4001, 4010, 4011 rotary evaporators. Two-stage pump with linear-guided diaphragms. High suction capacity of 1.7m3/h. Suction capacity for up to 3 evaporators simultaneously. Achieves an ultimate vacuum of 9 mbar.

Replacement Exhaust Odor Filter Cartridge. for Rotary Vane Vacuum Pump. Life is approximately 6 months at 10 microns vacuum.

Replacement Exhaust Oil Filter Cartridge. for Rotary Vane Vacuum Pump. Life is approximately 1 year at 10 microns vacuum.

MAJOR REPAIR KIT D150

MAJOR REPAIR KIT for Precision Belt Drive Vacuum Pump, Model D75

Accessories for DUOSEAL® Pumps - 1400K-04, Major Repair Kit, DuoSeal 1400 Pumps with Mechanical Seal

Accessories for DUOSEAL® Pumps - 1393J, Exhaust Connectors for High Vacuum Pumps

Sensor for 1526 Welch diagnostic vacuum gauge - replacement part.

Diagnostic Vacuum Gauge, Model 1526, measures system vacuum levels from atmospheric pressure to 10-3 torr, Vacuum analytics for leak, outgassing & pump-down, Soft protective boot & hard travel case, includes sensor, batteries, and carrying case, Power: 4-AA Batteries

Freezer Upright Biomedical. With storage down to -30 C easily with constant stable control, Temperature range:-20degreeC to -30degreeC, External dimensions (W x D x H):770 x 830 x 1955mm, Internal dimensions (W x D x H):650 x 700 x 1520mm

Stand. Table stand for VACUUBRAND VHC pro aspiration hand controller. Allows the VHC pro to be set down in on a bench or in a biological safety cabinet, without the tip contactiing the surface.

BVC shuttle, for VACUUBRAND BVC basic, control and professional models. Small wheeled cart allows easy movement of the BVC for ready access to the collection vessel.

Printer.

Filter for actived carbon.

Pack of 10 refill of actived carbon.

Category