Rxreliance

Replacement Glass Stem Only, Viton O-Rings, 0-4mm.

Hi-vac valve 0-8mm, 1-arm, glass only, knotes style.

Hi-vac valve 0-8mm, 90 degree, glass only, kontes style.

Hi-vac valve, 0-8mm, 180 degree, glass only, kontes style.

Reaction Vessel. Jacketed, 1000ml, 100mm Schott O-Ring Flange, 3/4in Beaded Pipe Inlet/Outlet, CG-911-A-10 Drain Valve, Graduation Scale On Both Sides Showing the Approximate Volume, Chemically Resistant Perfluoro O-Rings, GL Thread Inlet/Outlets.

Single neck heavy wall wide mouth recovery flask, 1000ml, GL80, 24/40 connecting adapter.

Flask only, 1000ml single neck heavy wall wide mouth recovery, GL80, 24/40 connecting adapter.

Support frame. Mobile, Jacketed, 28.5in wX28.5in dX95.25in h, complete with safety shield assembly, high flow manifold, and pressure relief and gauge, Supplied with Insulated Hose And Circulator Fitting,

Flask. Volumetric Flask, 100ml, Heavy wall, Bubble Neck, Large Numbers, Flat Bottom, Class A, To Contain, number 16 Stopper.

Kit 10l distillation shelf and glassware for process reactor system.

Solvent Reservoir, 10L, Bottle Only, for Mobile phase HPLC cap system.

Flask. Volumetric Flask, Heavy wall, Bubble Neck, Large Numbers, Flat Bottom, Class A, To Contain, Number 16 Stopper.

Stir Bearing, Mechanical Seal, 1-3/4in Threaded Connection, 10mm, Body Only.

Evaporator/Concentrator Manifold, Replaceable Needles 11well.

Tru-stir stirrer shaft coupling replacement component, 12.7mm shaft adapter with collar.

Funnel, separatory, 125ml, squibb, 2mm PTFEstopcock, 14/20 joints old style.

Vial, 2.0mL, Clear, Silanized, Large Opening, 12x32mm, GPI 10-425.

Vial, 1.5mL, Clear, Large Opening, High Recovery, 12x32mm, 11mm Crimp, Silanized.

Vial, 2.0mL, Amber with Marking Spot, Silanized, Snap Ring, 12x32mm, 11mm Crimp.

Vial, 2.0ml, amber with marking spot, silanized, standard opening, 12x32mm, 11mm crimp.

Vial, 2.0ml, amber, silanized, standard opening, 12x32mm, 11mm crimp.

Vial, 2.0ml, clear with marking spot, silanized, standard opening, 12x32mm, 11mm crimp.

Vial, 2.0ml, amber with marking spot, silanized, large opening, 12x32mm, gpi 10-425.

Vial, 2.0ml, clear with marking spot, silanized, large opening, 12x32mm, gpi 10-425.

Vial and closure kit. Preassembled RAM Vial and closure kit, Preassembled blue cap, Clear with Spot 2.0mL 12x32mm 9mm Thread Large Opening RAM Vial and 0.040 PTFE/Red Rubber Septa Lined Blue Closure,

Vial and closure kit. Preassembled RAM Vial and closure kit, Amber 2.0mL 12x32mm 9mm Thread Large Opening RAM Vial and a PTFE/Silicone Septa Lined BONDED CLOSURE.

Vial and closure kit. Preassembled RAM Vial and closure kit, Preassembled blue cap, for Clear 2.0mL 12x32mm 9mm Thread Large Opening RAM Vial and 0.040 PTFE/Red Rubber Septa Lined Blue Closure.

Vial and closure kit. Preassembled RAM Vial and closure kit, Clear 2.0mL 12x32mm 9mm Thread Large Opening RAM Vial and a PTFE/Silicone Septa Lined BONDED CLOSURE.

Vial and closure kit. Preassembled RAM Vial and closure kit, Amber 2.0mL 12x32mm 9mm Thread Large Opening RAM Vial and a PTFE/Silicone Septa Lined BONDED CLOSURE With Slit.

Vial and closure kit. Preassembled RAM Vial and closure kit, Clear 2.0mL 12x32mm 9mm Thread Large Opening RAM Vial and a PTFE/Silicone Septa Lined BONDED CLOSURE With Slit.

ChemRxnHub Process System Complete with Glassware, Stand, and Digital Overhead Stirrer 500ml.

Hi-vac valve 0-12mm, 1-arm, glass only, knotes style.

Hi-vac valve, 0-12mm, 90 degree, glass only, kontes style.

Hi-vac valve, 0-12mm, 180 degree, glass only, kontes style.

Micro Coil Condenser, Compatible with Mettler Systems.

Column Chromatography, 0.75in id, effective length 10in, 2mm PTFE stopcock, coarse fritted disc.

Column chromatography 1.0in id, effective length 18in, 2mm PTFE stopcock, coarse fritted disc.

Column chromatography 1.5in id, effective length 12in, 2mm PTFE stopcock, coarse fritted disc.

Distilling column, 24/40 joint, 300mm, vigreux style.

Distilling column, 24/40 joint, 450mm, vigreux style.

Distilling column, 29/42 joint, 150mm, vigreux style.

Distilling Receiver, 20mL, Moisture Test, Barrett style, 29/42 Joint Size, 2mm PTFE Stopcock, Approximately 325mm HeightX95mm Width.

Extraction apparatus. Jumbo Soxhlet, Complete apparatus consists of a condenser, extractor, round bottom flask, adapter, PTFE covered o-ring and clamp, Capacity 500ml, Extractor id 68mm, flange size 60, lower joint 45/50, Length 350mm, thimble size 58x170mm, flask capacity 1000ml.

Filter Funnel Only, Coarse Frit, number 40 O-Ring Joint, 60 OD, 65 Pinchclamp, 250ml.

Fixed Height Sample Tube for 15L BioReactors, M10 Thread, Max Immersion Length: 400mm.

Fixed Height Sample Tube for 2-5L BioReactors, M10 Thread, Max Immersion Length: 212mm.

Fixed height sample tube for 7l bioreactors, M10 thread, max immersion length: 315mm.

Flask, Erlenmeyer, 1000ml, GL-45 thread, polypropylene liner less closure and pouring ring.

Flask, Erlenmeyer, 10ml, GPI 20-400 thread, For use with Mininert valves.

Flask, Erlenmeyer, 2000ml, GL-45 thread, polypropylene liner less closure and pouring ring.

Flask, Erlenmeyer, 250ml, GL-45 thread, polypropylene liner less closure and pouring ring.

Flask, Erlenmeyer, 25ml, GPI 20-400 thread, for use with Mininert valves.

Flask, Erlenmeyer, 4000ml, GL-45 thread, polypropylene liner less closure and pouring ring.

Flask, Erlenmeyer, 500ml, GL-45 thread, polypropylene liner less closure and pouring ring.

Flask, flat bottom, 300ml, Replacement Part for Extraction Apparatus Soxhlet.

Flask, round bottom, 25ml, heavy wall, 19/22 -19/22, 3-neck, angled 20 degree.

Flask, round bottom, 50ml, heavy wall, 19/22 -19/22, 3-neck, angled 20 degree.

Mobile benchtop support stand for 20l gas scrubber.

Adapter only, PTFE, gl80 to 24/40 outer for flask recovery heavy wall.

Glass body only for NMR tube valve, european style.

Glass mosquito feeder, membrane style.

Harvest tube, M10, for 3l Bio Reactors.

Harvest Tube, M10, for 5L Bio Reactors.

Harvest tube, M10, for 7l Bio Reactors.

Heat Exchanger, Cold Finger, for 2-5L Bio Reactors.

Heat Exchanger, loop, for 5l Bio Reactors.

Heat Exchanger, loop, for 7l Bio Reactors.

Heating mantle, reactor capacity: 20 liter (short), watts: 450, 220v.

Insert, 0.05mL, Glass, BM with Bottom Spring, 6x25mm, Silanized.

Replacement Plug Only, Natural Color Knob, for NMR Tube Valve, European Style.

Reaction Kettle Lid. Dome style, Duran, Flat Ground, Lid ID: 80mm, for construction of single or multiple neck reaction kettle heads. Mating surface is ground. Outer taper of flange is formed at a 45 degree angle to accept the CG-141 stainless steel clamp.

Micro Overhead Stirrer for Tissue Grinder.

Probe Holder, Adjustable, M18 Thread 12mm, Adjustable height for Bioreactors.

Air Aeration Tube with Porous Sparger M10 for 3L Bio Reactors.

Air Aeration Tube with Porous Sparger M10 for 7L Bio Reactors.

Air Aeration Tube with Porous Sparger M10 for 5L Bio Reactors.

Replacement sparger tip, 10 micron.

Replacement sparger tip, 15 micron.

Flake Retaining cup, 30mm, PTFE the complete item consists of a compression fitting, deep perforated PTFE cup and a 50 micron porosity PTFE filter disc.

Reaction Vessel Lid, 6-Nk, 250mL, Compatible with Mettler Systems.

Reaction Vessel, Flat Bottom, 50mL, Compatible with Mettler Systems.

Reaction Vessel, Round Bottom, 50mL, Compatible with Mettler Systems.

Storage/Reaction Vial, 4mL, Complete, Clear, 15X45mm, 13-425 Green Solid Cap, TFE Septa.

Process reactor. Jacketed, Complete, electric motor, 92.8in oah with motor, 16.2in clearance below valve, with cg-1969-m-06 manifold system, Reactor Jacket Graduation Scale On Both Sides, 7-Neck Lid With Large Powder Addition Port, Heavy Duty Lockable Casters

Process reactor. Jacketed, Complete, Air motor, 89.3in oah with motor, 16.2in clearance below valve, with cg-1969-m-06 manifold system, Reactor Jacket Graduation Scale On Both Sides, 7-Neck Lid With Large Powder Addition Port, Heavy Duty Lockable Casters

Micro Coil Condenser, Jacketed, Compatible with Mettler Systems.

Replacement septa for M18 Bioreactor septum holder.

Sampling tube. Reduced diameter, M6 thread, 1/8inod tubing, for 2-5l bioreactors, 210mm max immersion length.

Valve, Chem-Vac, Glass Plug, Hi-Vac, Low Hold-Up, 0-4mm Bore, Viton O-Ring.

Vapor Tube. Compatible with Buchi Rotary Evaporators, 24/40, 288mm OAL, Decaled inR114/144in Length A is 45mm. Thread is made for use with standard Combi-Clip.

Vapor Tube. Compatible with Buchi Rotary Evaporators, 24/40, 188mm OAL, Decaled inR210/215in, for Glass Assembly (V, C, S, E, R, BY), Thread is made for use with standard Combi-Clip.

Vapor Tube. Compatible with Buchi Rotary Evaporators, 24/40, 288mm OAL, Decaled inR114/144in Length A is 160mm. Thread is made for use with standard Combi-Clip.

Vapor Tube. Compatible with Buchi Rotary Evaporators, 24/40, Flanged, Decaled inELin Units, Thread is made for use with standard Combi-Clip.

Vapor Tube. Compatible with Buchi Rotary Evaporators, 24/40, 288mm OAL, Decaled inR210/215in, for Glass Assembly A, Thread is made for use with standard Combi-Clip.

Peptide Synthesis Vessel, 100ml, Solid Phase, Coarse Frit, GL 25 thread, Fritted Disc Diameter/45.

Peptide Synthesis Vessel, 10ml, Solid Phase, Coarse Frit, GL 14 thread, Fritted Disc.Dia./15.

Peptide Synthesis Vessel, Solid Phase, Coarse Frit, GL 32 thread, Fritted Disc Diameter/50, 250ml.

Peptide Synthesis Vessel, 250ml, Solid Phase, Coarse Frit, GL 32 thread, Fritted Disc Diameter/50.

Peptide Synthesis Vessel, 250ml, Solid Phase, Medium Frit, GL 32 thread, Fritted Disc Diameter/50.

Peptide Synthesis Vessel, Solid Phase, Coarse Frit, GL 25 thread, Fritted Disc Diameter/20, 25ml.