• 0
Shop Products $

Wrench Set. 1/4 x 5/16in & 10mm x 11mm Open-End Set Use w/Shimadzu Capillary Installation Gauge

Capillary Installation Gauge. for Shimadzu 2010, 2014, and 17A

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 340[degree]C. I.D.: 0.53mm. Length: 30m. Film Thickness: 0.25um.

KIMBLE® Large-Volume Vacuum Traps with O-Ring Joint, DWK Life Sciences - 926055-0500, 500 ml, Large-volume two-piece vacuum traps

CONNECTOR SS 1/4IN FRONT FERRULES PK10 - SWSS4031

NUT BRASS 1/16IN PK10 - SWB1021

OUTLET FITTINGS SD-1 500/800ML PK5 - R007105605

OUTLET FITTING SD-1 50/200ML/MIN SYS PK5 - R007105603

COLUMN END PLUGS 1/8IN PK5 - PL1310-0039

COLUMN CONNECTING NUTS 1/8IN PK5 - PL1310-0037

O-RING NEBULIZER PL-ELS 2100 PK2 - PL0860-0550

O-RING EXTRACTION TOOLMARKES UNITY TDI - MKI-Z-0351

O-RING INSERTION TOOLMARKES UNITY TDI - MKI-Z-0285

COLD TRAP TENAX MARKES UNITY SERIES 2 - MKI-U-T9TNX-2S

COLD TRAP SULFUR UNITY 2 - MKI-U-T6SUL-2S

COLD TRAP HIGH BOILERS C6-C40 UNITY 2 - MKI-U-T1HBL-2S

COLD TRAP GREEN HOUSE GASES UNITY 2 - MKI-U-T16GHG-2S

COLD TRAP H2S UNITY 2 TD-100 - MKI-U-T14H2S-2S

COLD TRAP CHEM WEAPON ANAL C6-C40 UNITY2 - MKI-U-T10CW-2S

O-RING MARKES 6MM COLD TRAP SEALS PK10 - MKI-U-COV06

RIS PROBE MAINTENANCE KIT - G7005-60170

PM KIT 12 MONTH RV5 OIL PUMP FOR SCD/NCD - G6600-67007

Quiet Cover for GC/MS, Agilent Technologies - G6014B, Quiet Cover for GC/MS, Pfieffer Duo2.5 , Agilent DS42, Agilent DS42i, Edwards E2M1.5 2.5 vacuum pumps

SEAT ASSEMBLY ULD FOR G4226A - G4226-87030

PM KIT G4226A LOW DISPERSION - G4226-68740

MICRO VIAL TRAY - G4226-60021

SUPPORT RING 1290 INFINITYLC W/SEAL WASH - G4220-63010

1290 INFINITY INLET VALVE TYPE N - G4220-60122

BOTTLE HEAD ASSEMBLY UCT STREAMSELECT - G4220-60117

TUBING KIT 140MM -ULTRA CLEAN TUBING PK2 - G4220-60070

SUPPORT RING INTEGRATED FOR 1290 PUMP - G4220-60015

GAS REGULATOR W FILTER 001UM MANOMETER - G4218-60100

USB MEMORY STICK FOR G4208A - G4208-68700

SEAL WASH PM KIT FOR 1290 QUAT PUMPS - G4204-68742

JET WEAVER MIXER KIT V380 QUAT/FLEX - G4204-68380

JET WEAVER MIXER KIT V100 QUAT/FLEX - G4204-68100

JET WEAVER MIXER KIT V35 QUAT/FLEX - G4204-68035

PEEK SEAL FOR INLET WEAVER ASSEMBLY - G4204-40005

CLAMP FOR INLINE FILTER - G4204-40000

SYRINGEX-TYPE CTC 100UL22GTHTC-PAL - G4200-80118

QUICKPROBE PROBE HOLDER - G3971-60200

TUBE HOLDER - G3971-20251

QUICKPROBE DB-1HT 2M 025MM 010UM - G3903-61006

LTM TRANSFER MODULE 5IN TL ONLY - G3900-64016

DB-5MSUI 30M25MM25UM5975T COLMODULE - G3900-63005

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G3870-67171, Repeller assembly, extraction, EI 350, for Agilent 5977 MSD

EXTRACTION-OMEGA LENS ASSY FOR C-LENS - G3666-67600

EXTRACTION-OMEGA LENS ASSY FOR M-LENS - G3666-67500

8900 SKIMMER CONE NI S-LENS 1/PK - G3666-67421

8900 SKIMMER CONE PT/CU S-LENS 1/PK - G3666-67401

ORS CELL ASSEMBLY 8900 W/OUT AXIAL ACCEL - G3666-67142

ORS CELL ASSEMBLY 8900 WITH AXIAL ACCEL - G3666-67141

OCTOPOLE ASSEMBLY 8900 W/OUT AXIAL ACCEL - G3666-67046

OCTOPOLE ASSEMBLY 8900 WITH AXIAL ACCEL - G3666-67045

SCREW/SPACER/ORING FOR 8900 NON-AA CELL - G3666-67044

GAS TUBING SET FOR ARGON GAS PURIFIER - G3666-67026

SKIMMER BASE ASSY 8900 W/RETRO-S BRASS - G3666-60601

EXTRACTION LENS 2 FOR M-LENS FOR ICP-MS - G3666-60503

EXTRACTION LENS 1 FOR M-LENS FOR ICP-MS - G3666-60502

EXTRACTION LENS 2 8900 ICP-MS W/S-LENS - G3666-60403

EXTRACTION LENS 1 8900 ICP-MS W/S-LENS - G3666-60402

SKIMMER BASE ASSY 8900 W/S-LENS BRASS - G3666-60401

SKIMMER BASE ASSY 8900 WITH X-LENS SUS - G3666-60301

SAMPLE TRAY FOR 8900 SERIES ICP-MS 1/PK - G3666-40104

OMEGA LENS 8900 ICP-MS WITH S-LENS 1/PK - G3666-20404

BLANK PLUG FOR DILUTION PORT PTFE 8900 - G3666-20391

NUT PLATE ASSY OVEN RIGHT SIDE (8 POS) - G3440-81664

CrossLab Self-Tightening Column Nuts for GC, Agilent Technologies - G3440-81013, Column nut, collared, self-tightening, MSD

CrossLab Self-Tightening Column Nuts for GC, Agilent Technologies - G3440-81011, Column nut, collared, self-tightening, inlet/detector

ADAPTER ASSEMBLY PACKED-CAPILLARY - G3435-60350

O-RING B (PERFLUORO OD:3.8) PK5 - G3280-67116

O-RING A (PERFLUORO OD:1.07) PK5 - G3280-67115

77/79/8800 SKIMMER CONEPT/NIS-LENS1/P - G3280-67065

77/79/8800 SKIMMER CONEPT/CUS-LENS1/P - G3280-67064

COMPREHENSIVE SUPPLIES 7700X+E/8800 - G3280-67004

PLATE BIAS FOR ICP-MS - G3280-60615

EXTRACTION LENS 2 FOR X-LENS FOR ICP-MS - G3280-60613

OMEGA LENS FOR X-LENS ICP-MS 1/PK - G3280-60609

ORGANIC SOLVENT INTRODUCTION KIT ICP-MS - G3280-60580

OFFSET SKIMMER ASSEMBLY 1PK - G3280-60381

AR GAS TUBING KIT 7700S 8800+7900 S/CON - G3280-60163

AR GAS TUBING KIT7700X/E + 7900 ICP-MS - G3280-60160

SAMPLE TRAY FOR ICP-MS 1/PK - G3280-40103

CELL EXIT LENS ICP-MS 1/PK - G3280-20664

TUBING FOR REACTION CELL GAS 1/PK - G3280-20663

OMEGA LENS FOR S-LENS ICP-MS - G3280-20653

OMEGA BIAS LENS FOR S-LENS ICP-MS - G3280-20646

CELL FOCUS LENS ICP-MS 1/PK - G3280-20633

DEFLECT LENS ICP-MS 1/PK - G3280-20628

CELL ENTRANCE LENS ICP-MS 1/PK - G3280-20618

OMEGA BIAS LENS FOR ICP-MS X-LENS - G3280-01650

INTERFACE WRENCH FOR SAMPLING CONE - G3280-01507

SKIMMER CONE COPPER FOR 7500CS - G3270-60643

SKIMMER CONE PT TIP NI BASE FOR 7500CS - G3270-60106

CR SPECIATION COLUMN FOR DRINKING WATER - G3268-80001

NEB GAS TUBING WITH PEEK CONNECTOR 1/P - G3266-80017

QUIET COVER II - G3199C

QUICKSWAP RESTRICTOR 0100 ID PK4 - G3185-60362

QUICKSWAP RESTRICTOR VARIETY PACK - G3185-60300

5977 CI 350 REPELLER HEATER ASSEMBLY - G3170-60416

5975C INERT EI 350 REPELLER ASSEMBLY - G3170-60171

ANODIZED REPELLER ASSEMBLY (SST) - G3169-60170

MIRA MIST NEBULIZER (PTFE) 1/PK - G3161-80000

SERIAL-USB CONVERTER CABLE FOR I-AS - G3160-80200

I-AS TRAY G 28 POSITIONS FOR 20ML VIALS - G3160-80066

I-AS TRAY F 15 PLACES FOR 48MM OD VIALS - G3160-80065

NEEDLE HOLDER FOR I-AS - G3160-80041

DRAIN TUBE TYGON 3/32 X 5/32 5M - G3160-67000

DRAIN TUBE TO RINSE/DRAIN BOTTL I-AS PK2 - G3160-65328

PERI PUMP TUBING SET FOR I-AS TYGON PK5 - G3160-65327

PERI PUMP TUBING SET FOR I-AS TYGON 1/P - G3160-65326

TUBING HOLDER PEEK MICRO FLOW NEB - G3160-65325

PFA NEEDLE 08 MM ID - G3160-65324

TRAY COVERI-AS - G3160-65321

RINSE SOLUTION INLET/OUTLET TUBING I-AS - G3160-65320

15 ML PFA VIALS FOR I-AS TRAY D 10/PK - G3160-65317

HOLDER FOR CARRY TRAY COVER I-AS - G3160-60015

GC INTERFACE MANUAL - G3158-90021

INJECTOR ASSEMBLY GC-ICP-MS INTERFACE - G3158-80150

STAINLESS STEEL PIPE 1/16 IN GC-ICP-MS - G3158-80081

PRE-HEATING PIPE W/CONNECTOR GC-ICP-MS - G3158-80080

TRANSFER LINE FOR GC-ICP-MS INTERFACE - G3158-80060

ALIGNMENT BOSS GC-ICP-MS - G3158-65008

PFA TUBE 1/8INCH 2 M - G3158-60010

AS SPECIATION COLUMN FOR DRINKING WATER - G3154-65001

MICROFLOW NEB PFA(200) W/SPS4 PROBE KIT - G3139-68000

MICROFLOW NEB PFA (20) W/I-AS PROBE - G3139-65108

MICROFLOW NEBULIZER PFA 20-50UL/MIN 1/P - G3139-65106

INJECTOR PORT 2MM PFA BASE USE MICROFLO - G3139-65005

CONNECTOR PFA FOR MICROFLOW NEBULIZER - G3139-65004

ISIS TUBING ADAPTER (ISTD/PERIPUMP) - G3138-65158

REDUCING UNION CONNECTOR8MM X 4MM ISIS - G3138-65144

Y CONNECTOR FOR PUMP TUBING ISIS 5/PK - G3138-65143

PLUG FOR CARRIER GAS CONNECTOR3/PKISIS - G3138-65141

REDUCING UNION CONNECTOR6MM X 4MMISIS - G3138-65140

REDUCING UNION CONNECTOR6MM X 3MMISIS - G3138-65139

TUBING FOR GAS LINEPTFE30MM ID5M - G3138-65138

TUBE PERIPUMP ISMAPREN 2STOP OR/PURP PK6 - G3138-65128

SAMPLE LOOP 100 UL ISIS - G3138-65122

MIXER FOR ISIS - G3138-65121

NUT FOR VALVE ISIS 6/PK - G3138-65118

CFT FERRULE FLEXI GOLD UM LARGE 10/PK - G2855-28506

CFT FERRULE FLEXI GOLD UM SMALL 10/PK - G2855-28505

CFT FERRULE FLEX GOLD 053MM ID COL 10PK - G2855-28503

CFT FERRULE FLEX GOLD 032MM ID COL 10PK - G2855-28502

O-RING VITON FOR BABINGTON NEB. PK4 - G1820-65199

O-RING KIT CONCENTRIC NEB. ICP-MS - G1820-65075

CELL SEAL ASSEMBLY (500NL) - G1315-87101

QUARTZ CELL BODY 10MM - G1315-80001

FUSED SILICA/PEEK CAPILLARY 75UM 70CM - G1315-68708

TUBE PTFE ESD 1_6-0_8 - G1315-67305

CELL SCREW KIT PK2 - G1314-65062

BIO MICRO FLOW CELL VWD3MM2ULRFID - G1314-60189

MICRO FLOW CELL VWD3MM2ULRFID - G1314-60187

STANDARD FLOW CELL VWD10MM 14ULRFID - G1314-60186

SEMI-MICRO FLOW CELL VWD6MM5ULRFID - G1314-60183

HI PRESSURE FLOW CELL VWD10MM14ULRFID - G1314-60182

MICRO CELL ASSY - G1314-60081

CELL ASSEMBLY VWD-PREP-03MM - G1314-60025

CELL ASSEMBLY VWD-PREP-3MM-4UL - G1314-60024

PEEK CAPILLARY 025 MM ID 160 MM - G1313-87306

PEEK SEAT TUBING 017MM ID 100MM 23UL - G1313-87302

EXTERNAL VIAL TRAY FOR 17 2M VIALS - G1313-60004

DISPOSAL TUBE FOR EXT VIAL TRAY - G1313-27302

IN-LINE FILTER FOR G1311A - G1311-60006

HIGH ENERGY DYNODE 5973 SERIES - G1099-80001

COLUMN INSTALLATION TOOL FOR 5973/5975 - G1099-20030

CONFIGURABLE SUPPLIES KIT FOR 8900 ICPMS - G1091A

NUTS AND FERRULES FLANGELESS PK8 - DY70008101

Archon Purge and Trap Supplies, Agilent Technologies - DY70007791, Sparge probe replacement kit, for S/N above 13160, square base

WATER PROBE S/N ABOVE 995 REPL KIT - DY50573990

GLASS BARREL W/DECAL ARCHON 26ML - DY50296800

PACE PENTACHLOROETHANE - CUS-00002040

UNIVERSAL SS TUBES PK10 - C-UN010C

TUBE TENEX SS TD PRECONDITIONED/CAP PK10 - C-TBP1TC

CARBOGRAPH 1 SS TUBE F/PUMPD C5-C14 PK10 - C-TBP1C1C

MATERIAL EMISSIONS SS TUBES C4-C32 10/PK - C-TBME10

TUBE EMPTY STAINLESS STEEL TD PK10 - C-TBE10

LINER PTFE DIRECT DESORPTION 10/PK - C-PL010

GUARD COLUMN HOLDER - CP914828

Z-AXIS DRIVE TUBING ASX 130/260 1/PK - CP913584

CrossLab Inert Nebulizers for ICP-OES, Agilent Technologies - CP913246, Nebulizer, Mira Mist, parallel path, PTFE, for high TDS applications for ICP-OES. Enhanced parallel path nebulizer gives high salts and TDA capability

WRENCH OPEN END 1/4 IN. + 5/16 IN 1/PK - CP8451

TUBING 1/8IN X 2.1MM SS - CP84011

Accessories, Agilent Technologies - CP82117SS, Connector, male, stainless steel, for Gas clean connecting unit, ¹/8 IN. with dust filter

FS ULTIMATE PLUS DEACT 012MM X 6M - CP801206

4-POSITION CONNECTING UNIT 1/4 IN - CP7989

PROCESS CONNECTING UNIT 1/8 IN - CP7988P8

FLUSH HEAD FOR CONNECTING UNIT - CP7987

SS MALE CONNECTOR 6 MM W/ DUST FILTER - CP7986SS6

MALE CONNECTOR 1/4 IN WITH DUST FILTER - CP7986

Accessories, Agilent Technologies - CP7981, Gas Clean wall-mounting bracket for 1-position) connecting unit only

PROCESS CONNECTING UNIT 1/4IN CLEAN GAS - CP7980P4

Accessories, Agilent Technologies - CP7980, Gas clean connecting unit, 1-position, ¹/4 IN.

FILTER CONNECTING UNIT -NO BASEPLATE - CP7978

GASOHOL COLUMN KIT - CP7808

SINGLE BED PENCIL FILTER - CP743057

PENCIL FILTER 50%CHARCOAL/50%MOL - CP743056

CONNECTOR SS 1/16IN MALE - CP741648

GAS CLEAN FILTER KIT FOR TCD - CP738408

FERRULEGRPH/VSPLCAP053MMX053MM1/P - CP4784

TUBINGSS1/16 INX 075MM10M LGTH1/P - CP4056

TUBINGSS 3161/16IN X 50MM5M1/PK - CP4049

TUBINGSS REG1/4INX44MM25 M1/PK - CP4032

TUBINGSS 3161/8 INX21MMX25 M L1/PK - CP4026

TUBINGSS1/8INODX21MMID5M L1/PK - CP4024

PART TRAP 2.5M X0.25 WCONNECT 0.250.25 - CP4019

PARTICLE TRAP ULTIMETAL 2.5MX0.5MM - CP4018

PART TRAP 2.5M X0.32 WCONNECT 0.320.32 - CP4016

TBGSS 1/4 IN X 44 MM316 1 M LNGTH - CP4013

TUBINGSS1/16INODX050MMID1 M1/PK - CP4005

TBGSS1/16 IN X 025 MMSS 316 1 M1/P - CP4003

6FT 1/8 2MM MOLSIEVE 5A 45/60 UM - CP2065

3FT 1/8 2MM MOLS 13X 45/60 UM PRETESTED - CP2059

Intuvo Gas Clean Filter Kit, Agilent Technologies - CP17995, Gas clean filter kit, Intuvo, includes bracket, connecting unit, and filter

GAS CLEAN FILTER SCD KIT - CP17990

GAS CLEAN KIT FOR 8890 AND 8860 GC - CP179880

HIGH FLOW CONNECTING UNIT (1/8 IN) - CP17985

HIGH FLOW CONNECTING UNIT (1/4 IN) - CP17984

GAS CLEAN FILTER STARTER KIT FOR TCD/ECD - CP17981

CrossLab Gas Clean Purification Systems, Agilent Technologies - CP17978, Gas clean Purifier installation kit, Inert Carrier Gas, ¹/8 IN., oxygen 50 ppb/moisture 0.1 ppm/organics 0.1 ppm outlet concentration

GAS CLEAN CARRIER GAS FILTER KIT (1/4IN) - CP17977

GAS CLEAN FILTER KIT FOR CARRIER GAS - CP17975

Gas Clean Purification System, Agilent Technologies - CP17974, Gas clean filter kit GC/MS (¹/8 IN.). Includes GC/MS filter and connecting unit for 1 filter

PROCESS GAS CLEAN FILTER MOISTURE - CP17971P

CrossLab Gas Clean Purification Systems, Agilent Technologies - CP17969, Gas clean carbon dioxide purifier, 9 g CO2 ml filter capacity, 1 ppm outlet concentration

TUBE GENERAL PURPOSE HYDROPHOBIC SS PK10 - C-HY010C

EMPTY GLASS TD TUBES PK10 - C-GT010

GLASS AIR TOXICS (TO-17) PK10 - C-GAT010C

DIFFUSIVE SAMPLING CAPS PK10 - C-DF010

TD TUBE STORAGE CAPS LONG TERM PK10 - C-CF020

AIR TOXICS (TO-17) SS TUBES PK10 - C-AT010C

GLYKOPREP-PLUS LABWARE SET - AM96-NG

GLYKOPREP MICROTUBE ADAPTER SET - AM400

SS TUBING 50FT 159 MM OD 102 MM ID - AL3003

TUBINGSS159MM X 051MM - AL3002

TUBINGSS159MMODX076MMID50 FT1/PK - AL3000

CAPTIVAC GASKET KIT 5/PK - A796G

CAPTIVAC VACUUM COLLAR - A796

SPE VACUUM SYSTEM - INTL - A580I

SPE VACUUM SYSTEM - A580

GAS SAMPLING BAG 5L 200X690MM - 99689302

GAS SAMPLING BAG 1L 165X419MM - 99689301

PCI INTERFACE BOARD FOR PC CARY 50 - 9910103800

GAS-LIQUID SEPARATOR VGA-77 FOR AA - 9910071100

GAS-LIQUID SEPARATOR VGA 77 FOR ICP - 9910062000

FITTING END FOR 6.2MM COLUMNS - 820619-001

CONNECTOR RELIANCE GUARD COLUMN - 820563-901

FERRULE 1/16IN GPH/VSP 10PK - 8010-0315

FERRULE 08MM GPH/VSP 053 COL 10PK - 8010-0313

FERRULE 04MM 2HOLE GPH/VSP 025COL 10PK - 8010-0312

FERRULE 05MM GPH/VSP 032 COL 10PK - 8010-0311

FERRULE 04MM GPH/VSP 025 COL 10PK - 8010-0310

FERRULE 08MM VESPEL 053 COL 10PK - 8010-0309

FERRULE 05MM VESPEL 032 COL 10PK - 8010-0308

FERRULE 04MM VESPEL 025 COL 10PK - 8010-0307

FERRULE 03MM VESPEL 018 COL 10PK - 8010-0306

FERRULE 1/4IN GRAPHITE STRAIGHT 10PK - 8010-0305

FERRULE 05MM 2H GRAPHITE 032COL 10PK - 8010-0303

CrossLab Column Ferrules for Third Party GC Instruments, Agilent Technologies - 8010-0301, Agilent capillary ferrule for Varian/Bruker, 0.4 mm, graphite, 0.25 mm int.Ø column, max. 450 °C

COLUMN NUT SS 1093 INJECTOR 2PK V-B - 8004-0312

FERRULE 0425MM VESPEL 025 COL 10PK V-B - 8004-0219

CrossLab Column Ferrules for Third Party GC Instruments, Agilent Technologies - 8004-0217, Agilent straight ferrule for Varian/Bruker,¹/4 IN., 40% graphite/60% vespel, straight body, max. 400 °C

FERRULE 05MM 2H GP/VSP 032COL 10PK V-B - 8004-0215

FERRULE 0425MM 2H G/V 025COL 10PK V-B - 8004-0213

CrossLab Liner O-Rings for Third Party GC Instruments, Agilent Technologies - 8004-0204, Agilent liner o-ring for Varian/Bruker, graphite, 1078/1079 inlets, 5 mm id, similar to Varian 392534201

LINER O-RING GRAPHITE 63MMOD 10PK V-B - 8004-0203

LINER O-RING GRAPHITE 65MMOD 10PK V-B - 8004-0202

LINER UI SPME STRAIGHT WL 08MM 5PK V-B - 8004-0176

LINER UI SPLTLSS STRAIGHT WL 4MM V-B PK5 - 8004-0173

LINER UI SPLIT FRIT GOSNCK 34MM 5PK V-B - 8004-0171

LINER UI DIRECT 053MM COL 5PK V-B - 8004-0168

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8004-0167, Agilent liner for Varian/Bruker, Ultra Inert, direct, SPI for 0.25/0.32 mm columns

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8004-0165, Agilent liner for Varian/Bruker, Ultra Inert, splitless, single taper

LINER UI SPLIT GOOSENECK 34 MM 5PK V-B - 8004-0164

LINER UI 1077 SPLIT WOOL 4MM 5PK V-B - 8004-0163

LINER UI SPI 08MM 530 ID COC 5PK V-B - 8004-0162

LINER UI SPLTLS SNGLE TAPR 2MM 5PK V-B - 8004-0161

LINER UI SPLIT SNGL TAPR 34MM 5PK V-B - 8004-0160

LINER UI FRIT GOOSENECK 34MM 5PK V-B - 8004-0159

LINER UI SPLIT FRIT GOOSNCK 4MM 5PK V-B - 8004-0158

LINER UI DIRECT STRAIGHT 1.2MM V-B PK5 - 8004-0157

LINER UI SPLTLS DUAL TAPER 4MM 5PK V-B - 8004-0155

LINER UI SPLT STRGHT WOOL 4MM 5PK V-B - 8004-0154

LINER UI RECESSD TPR WL 4 MM 5 PK V-B - 8004-0153

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8004-0152, Agilent liner for Varian/Bruker, Ultra Inert, 4 mm int.Ø, split/splitless, single taper, wool

LINER UI SPLTLS SNGLE TPR 4MM 5PK V-B - 8004-0151

LINER SPLIT/LESS GOOSENECK 2MM 5PK V-B - 8004-0119

LINER SPLITLESS GSNK WL 2MM V-B PK5 - 8004-0118

LINER SPLITLSS STRAIGHT WOOL 4MM 5PK V-B - 8004-0116

LINER SPLITLESS GOOSENECK 4MM 5PK V-B - 8004-0113

LINER SPLIT GOOSENECK 3.4MM V-B PK5 - 8004-0112

LINER 1077 SPLIT WOOL 4MM 5PK V-B - 8004-0111

LINER SPI 08MM 530 ID ON COLUMN 5PK V-B - 8004-0110

LINER SPLTLESS SINGLE TAPER 2MM 5PK V-B - 8004-0109

LINER SPLIT SINGLE TAPER 34MM 5PK V-B - 8004-0108

LINER DIRECT STRAIGHT 12MM 5PK V-B - 8004-0107

LINER SPLIT STRAIGHT 4MM 5PK V-B - 8004-0106

LINER SPLITLESS DUAL TAPER 4MM V-B PK5 - 8004-0105

LINER RECESSD TPR WOOL 4 MM 5PK V-B - 8004-0103

LINER SPLTLS SNGL TPR WOOL 4MM 5PK V-B - 8004-0102

LINER SPLTLESS SINGLE TAPER 4MM 5PK V-B - 8004-0101

COLUMN NUT KIT SELF TIGHT 250 COL V-B - 8004-0009

CrossLab O-Rings and Supplies for PerkinElmer AAS Nebulizers and Burner Systems, Agilent Technologies - 8003-0843, O-ring, end cap, FPM fluoroelastomer polymer, Standard, 47.29 mm int.Ø.

CrossLab Tubing and Tubing Assemblies for PerkinElmer FIMS/FIAS, Agilent Technologies - 8003-0684, Peristaltic pump tubing, aqueous and HF acid compatibility, 3-stop, yellow/blue/yellow tabs, 72 mm tab separation

GASLIQUID SEPARATOR HOLDER - 8003-0672

GASLIQUID SEPARATOR GLASS PE FIMSFIAS - 8003-0671

CrossLab Adapters and Connectors for PerkinElmer FIMS/FIAS, Agilent Technologies - 8003-0663, Adapter K, ¼ IN. (6.4 mm) external thread, for 1.8 mm ext.Ø nipple, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400

PURGE WINDOW DV RADIAL 4X00 DV/5X00 DV - 8003-0472

TORCH GLASS 1-SLOT F/AQ SOLNS-OPT8X00 - 8003-0470

FILTER CARTRIDGE WTR FR OPTIMA 5/7/8X00 - 8003-0469

O-RINGFOR MEINHARD NEB OPTIMA 5/7/8X00 - 8003-0464

S/CHAMBER GLASS CYCL F/CONCENTRIC NEB - 8003-0462

TUBING PTFE 1MM ID S/CHAMBER DRAIN 1 FT - 8003-0460

PERI PUMP TUBES PVC RED/RED 12/PK - 8003-0459

AIR FILTER RF GENERATOR INLET-OPT3X00 - 8003-0455

INSERTION TOOL FOR LVOV PLATFORMS - 8003-0423

GRAPHITE TUBES HGA GROOVED F/LVOV PK10 - 8003-0421

BURNER HEAD 5 CM 1-SLOT FOR AIR-C2H2 - 8003-0418

TUBE PYROCOATED GRAPHIT INTEGRT PLT PK5 - 8003-0416

Y-CONNECTOR - 8003-0414

PTFE TUBING FOR FIAS 10MM ID X 1M - 8003-0412

CrossLab Tubing and Tubing Assemblies for PerkinElmer FIMS/FIAS, Agilent Technologies - 8003-0411, Tubing, aqueous and HF acid compatibility, for FIMS-100, FIMS-400, FIAS-100, or FIAS-400

STD THGA GRAPHITE TUBES 5PK - 8003-0410

NEBULIZER TUBING ASSEMBLY - 8003-0409

CAPILLARY TUBING PE AA+ICP NEB 10FT - 8003-0406

THGA CONTACT CYLINDERS - 8003-0401

BURNER HEAD VITON O-RING - 8003-0397

BURNER GASKET KIT (ORING END CAP) - 8003-0395

PURGE EXTENSION CERAMICOPTIMA 5300V7300V - 8003-0394

O-RING DV AXIAL PURGE WINDOW OPTIMA3MODL - 8003-0392

O-RING DV RADIAL PURGE TUBE OPTIMA3MODEL - 8003-0391

O-RING TORCH CLAMP VERTICAL TORCH MOD. - 8003-0390

O-RING DV AXIAL PURGE WINDOW OPTIMA5MODL - 8003-0389

O-RING DV RADIAL PURGE TUBE OPTIMA5MODEL - 8003-0388

PURGE WINDOW DV RADIAL 3X00 + 4/5/7300V - 8003-0387

PURGE WINDOW DV RADIAL 5/7X00 DV/8300 - 8003-0386

PURGE EXTENSION WINDOW DV RADL 2X/7/8000 - 8003-0384

IGNTR SPARK GAP ASSY F TP II DEMNT TRCH - 8003-0382

NYLON IGNITER STANDOFF OPTIMA 5/7/8X00 - 8003-0381

LOAD COIL FOR OPTIMA4X00/5X00/7X00 DV - 8003-0379

O-RING KIT FR INJCT SPRT ADPTR OPTIMA - 8003-0378

O-RING KIT FOR VERTICAL TORCH 457300V - 8003-0361

O-RING KIT FOR TORCH COMPLETE 457X00 - 8003-0360

O-RING KITFOR ADJ TORCH FOR OPTIMA780 - 8003-0359

TORCH DEMOUNTABLE SHORT 2/4/5/7X00DV - 8003-0348

TORCH DEMOUNTABLE 3-SLOT 2/4/5/7X00DV - 8003-0347

TORCH DEMOUNTABLE 1-SLOT 2/4/5/7X00 DV - 8003-0346

TORCH DEMOUNTABLE 1-SLOT OPTIMA 8X00 - 8003-0344

END CAP SCOTT S/C WITH CONCENTRIC NEB - 8003-0335

SCOTT SPRAY CHAMBER ASMBLY FOR INJCTR - 8003-0334

DRAIN CAP ASSY FOR DRAIN BOTTLE ASSY - 8003-0333

S/CHAMBER TRACEY GLASS CYCL+HELIX OPTIMA - 8003-0329

TIP KIT GEMTIP CROSS-FLOW II-2/4/5/7X00 - 8003-0327

NEBULIZER GEMTIP CROSS-FLOW II-OPTIMA - 8003-0326

TUBING QUICKDISCONECT FOR LOWFLOWGEMCONE - 8003-0324

NEBULIZER GEMCONE FOR OPTIMA 5/7/8X00 - 8003-0320

CrossLab Column Nuts for Third Party GC Instruments, Agilent Technologies - 8003-0311, Agilent column nut for PerkinElmer, ¹/16 IN.

FERRULE 1/4IN VESPEL 10PK PE - 8003-0223

FERRULE 1/8IN GRAPHITE/VESPEL 10PK PE - 8003-0219

FERRULE 05MM 2H GPH/VSP 032COL 10PK PE - 8003-0216

FERRULE 1/8IN GRAPHITE 10PK PE - 8003-0212

LINER O-RING GRAPHITE PSS 10PK PE - 8003-0204

LINER O-RING FKM PSS 10PK PE - 8003-0202

LINER UI SPLIT BTM RESTRICT 4MM 5PK PE - 8003-0166

LINER UI SPLITLESS STRAIGHT 2MM PE PK5 - 8003-0162

LINER UI SPLIT STRAIGHT WOOL 4MM 5PK PE - 8003-0160

LINER UI SPLT/LS BTM RESTRICT 4MM 5PK PE - 8003-0159

LINER UI PSS BOTTOM RESTRICT 2MM 5PK PE - 8003-0158

LINER UI PSS SPLTLS STRAIGHT 1MM PE PK5 - 8003-0157

LINER UI DI GSNK TOP HOLE WL 4MM PE PK5 - 8003-0155

LINER UI PSS STRAIGHT 2MM 5PK PE - 8003-0153

LINER SPLITLESS STRAIGHT 2MM 5PK PE - 8003-0107

LINER SPLIT STRAIGHT WOOL 4MM PE PK5 - 8003-0106

LINER SPLIT/LESS BTM RESTRICT 4MM 5PK PE - 8003-0105

LINER PSS STRAIGHT 2MM PE PK5 - 8003-0103

COLUMN NUT KIT SELF TIGHT 250COL PE PK10 - 8003-0010

FERRULE/FITTING KIT WPS-3000 6/PK TMO - 8002-0921

BUFFER LOOP 100UL WPS-3000SL/RS 1PK TMO - 8002-0860

COLUMN NUT BRASS 2PK TMO - 8002-0312

COLUMN NUT SPLIT/LESS INJECTOR 2PK TMO - 8002-0311

FERRULE 08MM GPH/VSP 053 COL 10PK TMO - 8002-0222

FERRULE 04MM GPH/VSP 025 COL 10PK TMO - 8002-0220

FERRULE 08MM GRAPHITE 053 COL 10PK TMO - 8002-0217

FERRULE 05MM GRAPHITE 032 COL 10PK TMO - 8002-0216

FERRULE 04MM GRAPHITE 025 COL 10PK TMO - 8002-0215

FERRULE 08MM M4NUT GPH 053COL 10PK TMO - 8002-0214

FERRULE 05MM M4NUT GPH 032COL 10PK TMO - 8002-0213

FERRULE 04MM M4NUT GPH 025COL 10PK TMO - 8002-0212

LINER O-RING GRAPHITE PTV 2PK TMO - 8002-0204

LINER O-RING GRAPHITE 8MM ID 2PK TMO - 8002-0203

LINER O-RING FKM SINTERED 10PK TMO - 8002-0201

LINER UI PTV STRAIGHT 1MM TMO PK5 - 8002-0161

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8002-0160, Agilent liner for Thermo, Ultra Inert, for Trace PTV inlets only, six baffles

LINER UI PTV BTM RESTRICTION 2MM TMO PK5 - 8002-0157

LINER UI PTV STRAIGHT 2MM TMO PK5 - 8002-0156

LINER UI SPLITLSS SNGL TPR 3MM 5PK TMO - 8002-0154

LINER UI SPLTLS SINGLE TAPR 5MM 5PK TMO - 8002-0153

LINER UI SPLITLES STRAIGHT 3MM 5PK TMO - 8002-0152

LINER UI SPLIT STRAIGHT 5 MM 5PK TMO - 8002-0151

LINER SPLITLSS SINGLE TAPER 3MM 5PK TMO - 8002-0104

LINER SPLITLSS SINGLE TAPER 5MM 5PK TMO - 8002-0103

LINER SPLITLESS STRAIGHT 3MM 5PK TMO - 8002-0102

LINER SPLIT STRAIGHT 5MM 5PK TMO - 8002-0101

COLUMN NUT KITMS1300 SLF TIGHTN TMO PK10 - 8002-0013

COLUMN NUT KIT MS SELF TIGHTEN TMO PK10 - 8002-0010

Fittings for Shimadzu LC Systems, Agilent Technologies - 8001-0816, Agilent CrossLab ferrule, stainless steel, 1.6 F (1.6 mm female), for Shimadzu LC-20AT and LC-20AD pumps

In-Line Filter for Shimadzu LC Systems, Agilent Technologies - 8001-0808, CrossLab inline filter, stainless steel, for Shimadzu LC-2010, LC-20AD/AB/AT, and LC-10ADvp/ATv pumps

Pump Supplies for Shimadzu LC Systems, Agilent Technologies - 8001-0521, CrossLab outlet check valve, for Shimadzu LC-20AD/AB, LC-10ADvp, and LC-10ATvp pumps

Pump Supplies for Shimadzu LC Systems, Agilent Technologies - 8001-0515, CrossLab plunger holder, for Shimadzu LC-10ADvp and LC-20AD/ADxr/AB pumps

COLUMN NUT NO-SLOT 6-SIDED 2PK SHM - 8001-0312

COLUMN NUT SLOTTED 6-SIDED 2PK SHM - 8001-0311

FERRULE 08MM G/V 053 COL 10PK GCMS SHM - 8001-0223

FERRULE 05MM G/V 032 COL 10PK GCMS SHM - 8001-0222

FERRULE 04MM G/V 025 COL GCMS 10PK SHM - 8001-0221

FERRULE 08MM GRAPHITE 053 COL 10PK SHM - 8001-0213

CrossLab Column Ferrules for Third Party GC Instruments, Agilent Technologies - 8001-0212, Agilent capillary ferrule for Shimadzu, 0.5 mm, graphite, 0.32 mm int.Ø column, max. 450 °C

FERRULE 04MM GRAPHITE 025 COL 10PK SHM - 8001-0211

LINER O-RING GRAPHITE SPLITLESS 10PK SHM - 8001-0203

LINER O-RING GRAPHITE SPLIT 10PK SHM - 8001-0202

LINER UI PTV STRAIGHT 125MM 5PK SHM - 8001-0163

LINER UI SPME P+T STRGHT 075MM 5PK SHM - 8001-0162

LINER UI SPLTLS TPR BTM HL 35MM 5PK SHM - 8001-0159

LINER UI SPLTLS TPR TOP HL 35MM 5PK SHM - 8001-0158

LINER UI SPLIT MID RESTRCT 3.5MM SHM PK5 - 8001-0156

LINER UI SNGLE TAPR 34MM 5PK SHM - 8001-0154

LINER UI STRAIGHT 34MM 5PK SHM - 8001-0153

LINER UI STRAIGHT 26MM 5 PK SHM - 8001-0151

LINER SPLIT MID RESTRICT 35MM 5PK SHM - 8001-0106

LINER MID-GOOSENECK 3.4MM SHM PK5 - 8001-0105

LINER SINGLE TAPER 34MM 5PK SHM - 8001-0104

LINER STRAIGHT 34MM 5 PK SHM - 8001-0103

COLUMN NUT KIT2MS SELF TIGHTEN SHM PK10 - 8001-0020

COLUMN NUT KIT SELF TIGHT 250 COL SHM - 8001-0016

COLUMN NUT KIT MS SELF TIGHTENING SHM - 8001-0015

CARTRIDGE HOLDER FOR GUARD 2.1/4.0MM ID - 79900CH-010

CrossLab Capillaries for HPLC, Agilent Technologies - 79826-87607, Standard capillary, SH/S, pre-swaged/non-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - 79826-87606, Standard capillary, SH/S, pre-swaged/non-swaged

Crosslab ZORBAX, Agilent Technologies - 763973-902

Crosslab ZORBAX, Agilent Technologies - 761973-902

Crosslab ZORBAX, Agilent Technologies - 761753-902

CrossLab Top-DNA and TOP-RNA, Agilent Technologies - 7572915C, TOP-DNA well plate tubes, straight barrel cartridge, tabless, for 1 µmol scale, PP, 150 mg, 1.8 ml

Crosslab ZORBAX, Agilent Technologies - 735953-902

GLASS CHAMBER FOR 20 PORT SPE MANIFOLD - 5982-9123

TUBES CARBON 3ML 250MG PK50 - 5982-4432

NPD JET UNIVERSAL FIT 0.011 INCH ID - 5200-0179

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 5200-0178, FID Jet, universal fit, 0.030 IN. int. Ø

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 5200-0177, FID jet, universal fit, 0.018 IN. Int.Ø

SPME FIBER SELECTION SET 2 PK5 - 5191-5879

SPME FIBER COLLECTION 1 PK5 - 5191-5878

SPME FIBER ACRYLATE-85/10 GRAY 3/PK - 5191-5876

SPME FIBER C-WR-95/PDMS/10 D BLUE 3/PK - 5191-5875

CrossLab SPME Fibers, Agilent Technologies - 5191-5872, SPME fiber, PDMS-100/10-P3, red

SPME FIBER PDMS-30/10 GOLDEN 3/PK - 5191-5871

SPME FIBER PDMS-7/10 GREEN 3/PK - 5191-5870

ECD ADAPTER FOR FLOW METER - 5190-9579

NPD ADAPTER FOR FLOW METER - 5190-9577

LINERULTRAINERTSTRAIGHT 075MM ID 25PK - 5190-7045

LINERUIDIRECT CONNECTNO HOLEWOOL5PK - 5190-7014

LINERUIDIRECT CONNNO HOLENO WOOL5PK - 5190-7013

LINERUIDIRECT CONNTOP HOLE W WOOL5PK - 5190-7012

T-CONNCTOR ULTIMETAL PLUS 1/16IN - 5190-6990

T-CONNECTOR 1/16IN ULTIMETAL PLUS - 5190-6989

1/16IN X 10MM ULTIMETAL PLUS TUBING10M - 5190-6983

Ultra Inert Liners, Agilent Technologies - 5190-6168, Liner, GC, ultra inert, straight, splitless

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-5112, Inlet liner, ultra inert, splitless, UI, Low-Fritted, glass-frit, single taper

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-5112-005, Inlet liner, ultra inert, splitless, UI, Low-Frit, glass-frit, single taper

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-5105, Universal, Ultra Inert, single taper, Mid-Frit Liner, glass frit

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-5105-005, Inlet liner, ultra inert, universal, UI, Mid-Frit, glass-frit, single taper

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-4056, Inlet liner, Ultra Inert, splitless, straight, for SPME

FERRULE 15% GRAPH/85% VESPEL SHORT PK10 - 5190-4054

Ultra Inert Liners, Agilent Technologies - 5190-4048, Liner, GC, ultra inert, straight, 0.75 mm int.Ø, recommended for SPME (solid phase microextraction) injections

Ultra Inert Liners, Agilent Technologies - 5190-4047, Liner, GC, ultra inert, straight, 1 mm int.Ø

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-3173, Inlet liner, Ultra Inert, split, single taper, glass wool, low pressure drop

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-3170, Inlet liner, Ultra Inert, splitless, single taper

CrossLab Split Liners for GC, Agilent Technologies - 5190-2275, Inlet liner, split, single taper, glass wool, deactivated, low pressure drop

CrossLab Splitless Liners for GC, Agilent Technologies - 5190-2271, Inlet liner, splitless, single taper, glass wool, deactivated

CrossLab Splitless Liners for GC, Agilent Technologies - 5190-2270, Inlet liner, splitless, single taper, deactivated

CrossLab Liner O Rings for GC, Agilent Technologies - 5190-2268, Non-stick fluorocarbon O-ring for Flip Top

SAMPLE LOOP 3ML CERTIFIED DEACTIVATED - 5190-2266

GAS SAMPLING TUBING 1/16IN SS WITH FTTGS - 5185-5817

LUER ADAPTORS/96-WELL FLEXIBLE COLS PK25 - 5185-5789

DISPOSABLE RES TRAY 96-WELL MANIF PK25 - 5185-5782

COLLECTION PLATE SPACER/DEEP WELL 2MM - 5185-5780

FERRULE KIT 1/16IN SILTITE 10/2NUT PK10 - 5184-3571

7500 ICP-MS ELECTRON MULTIPLIER - 5184-1983

SEPTA 9MM HS FOR HS TRANSFER LINE PK3 - 5183-4801

CAPILLARY COLUMN NUT FOR 6850 2/PK - 5183-4732

LINERDIRECT15MMIDNON-DEACTIVATD 25PK - 5183-4710

LINERDIRECT2MM IDNON-DEACTIVAED 25PK - 5183-4708

LINERDIRECT2MM IDNON-DEACTIVATED 5PK - 5183-4707

LINER SPLITLESS DBTAPER DEAC 25PK - 5183-4706

GLASS INDICATING O2 TRAP 1/8 IN SS - 5182-9202

BASIC GC INSTALLATION KIT - 5182-3453

MICROSEAL FOR 15MM ARROW SPME PROBES - 5182-3448

MICROSEAL FOR 11MM ARROW SPME PROBES - 5182-3447

ARROW MICROSEAL NUT - 5182-3446

O-RING 5.859IN FOR ANALYZER FLANGE PK6 - 5182-0570

PACKED INJECTION PORT KIT - 5181-8837

DECAPPER 8MM VIAL CAPS - 5181-8827

NEEDLE 10UL GT 23GA PTHP 3/PK - 5181-8811

ROTOR 10 PORT VALVE 225 DEGREES C - 5181-7460

025MM COOL-ON-COLUMN NEEDLES 3/PK - 5181-7442

FIXED INLET SPLITTER 0.5MM ID - 5181-3392

FIXED INLET SPLITTER 0.32MM ID - 5181-3391

FIXED INLET SPLITTER 0.22MM ID - 5181-3390

OUTLET SPLITTER SS FIXED 1:5 RATIO - 5181-3389

FERRULE 03MM VG 2HOLE 01 COL 10/PK - 5181-3388

O-RING FLUOROELASTOMER 0.176INID PK12 - 5180-4169

CONNECTOR 1/16IN HOSE PK10 - 5180-4148

CAP PLUG BRASS 1/4IN PK6 - 5180-4125

NUT SS 1/4IN PK10 - 5180-4106

NUT 1/16IN STAINLESS STEEL PK10 - 5180-4102

O-RING GREASED PK12 - 5080-8846

FITTINGS SS 1/4IN PK20 - 5080-8753

FITTINGS BRASS 1/4IN PK20 - 5080-8752

CrossLab Tubing Kits for HPLC, Agilent Technologies - 5067-4661, Tubing kit, 270 mm

CrossLab Capillaries for HPLC, Agilent Technologies - 5067-4609, Standard capillary, SL/SX, non-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - 5067-4608, Standard capillary, S/SX, pre-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - 5067-4607, Standard capillary, SX/SX, pre-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - 5067-4606, Standard capillary, SX/SX, pre-swaged/non-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - 5067-4604, Standard capillary, S/SX, pre-swaged/pre-swaged

CrossLab Capillary Kits for HPLC, Agilent Technologies - 5067-4601, Solvent tubing kit for 4-channel solvent selection

FILTER ASSEMBLY IN-LINE WITH 4.6X0.5MM - 5067-1602, InfinityLab Quick Change inline filter assembly, maximum pressure 1300 bar, stainless steel, for HPLC, 4.6 mm int.Ø., 0.5 µm pore size

CrossLab Fittings for HPLC, Agilent Technologies - 5067-1585, Replacement Swagelok fingertight PEEK fitting, for ¹/32 IN. (0.8 mm) ext.Ø capillary

CrossLab Capillaries for HPLC, Agilent Technologies - 5067-1571, Standard capillary, S/S, pre-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - 5067-1570, Standard capillary, S/S, pre-swaged/pre-swaged

CrossLab Fittings for HPLC, Agilent Technologies - 5067-1547, Swagelok fitting ferrule, PEEK, for ¹/16 IN. (1.6 mm) ext.Ø capillary

CrossLab Fittings for HPLC, Agilent Technologies - 5067-1540, Swagelok fitting screw, stainless steel, for ¹/16 IN. (1.6 mm) ext.Ø capillary

CrossLab Supplies for 8453/8454 UV Systems, Agilent Technologies - 5067-1539, Rotor seal for p/n 5063-6575 valve, Agilent 8453 UV dissolution multi-bath system (valve-based)

CrossLab Sampler Cones and Care Packages for ICP-MS, Agilent Technologies - 5067-0294, Cone care package with 2 pcs of nickel-tip copper base sampler cones for Agilent 7700, 7800, 7850, 7900, 8800 and 8900 ICP-MS

PRECISION GAS FLOW METER - 5067-0223

O-RING FPD OUTER WINDOW 2-023 PK12 - 5061-5891

INJECTOR PORT GRAPHPACK STNDRD 250/320UM - 5021-7170

INJECTOR PORT GRAPHPACK 530UM - 5021-7168

DETECTOR PORT GRAPHPACK 0.32 0.25ID - 5021-7166

DIVIDER GRAPHPACK FOR250-320UM COLUMNS - 5021-7148

DIVIDER GRAPHPACK 2M DUAL COLUMN - 5021-7146

SAMPLE LOOP ISIS 1.00ML VOL 1.00MM ID - 5005-0033

GAS PURIFIER OXYGEN FILER 1/8IN - 394977002

GATE TRAP ASSEMBLY - 393055101

QUAD-RING TOP FLANGE 7.484 ID - 393010924

O-RING VITON CLEAN 0.237 - 393010907

O-RING VITON CLEAN 0.176 - 393010906

O-RING GRAPHITE 6.5MMID6.5MMOD PK10 - 392611940

CrossLab Splitless Liners for GC, Agilent Technologies - 392611924, Injector liner, CP-1177, splitless, similar to HP#18740-870220, 5181-8818, 2 mm int.Ø, 78.5 mm length

COMPRESSION SPRING - 390534500

GAUGEDISINT25CM(FROM VESSEL BOTTOM) - 37-9000

VK VERIFIED BEAKER DISNTUSP - 37-5305V

DISINTEGRATION BEAKER(STD) - 37-5200

TUBE (38MM) RPLCMNT3 TUBE BSKT PK3 - 37-5005

VK VERIFIED TUBES(25MM)6 TUBE BSKT - 37-5000V

3 TUBE PLUNGER ASSEMBLY - 37-4110

6 TUBE PLUNGER ASSEMBLY - 37-4100

3 PLASTIC DISKS FOR 37-2030 - 37-4010

VK VERIFIED FLUTED DISC637-2000/3000 - 37-4000V

BSKT1TUB(92X44MMOD10MSH/1905MCRNFORVK100 - 37-3040

VK VERIFIED BSKT 3TUBE10MSHVK100 - 37-3030V

BSKT3TUB(38MMOD)10MESH/1905MCRN FORVK100 - 37-3030

BASKET6 TUBE20MESH/864MICRONFOR VK100 - 37-3010

VERIFIED BSKT 6TUBE 10MSH100 - 37-3001V

SCN40MSH/381MCRNS/SFOR 6TUBE BSKT PK6 - 37-2210

SCN10MSH/1905MCRNS/SFOR 6TUBE BSKT PK6 - 37-2200

COVERBASKET6 TUBE40MESH/381MICRON - 37-2110

COVERBASKET3 TUBE10MESH/1905MICRON - 37-2105

COVERBASKET6 TUBE10MESH/1905MICRON - 37-2100

BASKET 3 TUBE(38MM OD)10MESH/1905MICRON - 37-2030

BASKET6 TUBE20MESH/864MICRON - 37-2010

VERIFIED BSKT 6TUBE 10MSH - 37-2001V

BSKT6 TUBE10MSH/1905MICRON - 37-2001

50-MESH BASKET AND HOLDER 5 ML 400-DS - 33-9052

50-MESH BASKET 5 ML 400-DS - 33-9051

ASSY5ML CONTACT LENS HOLDER400DS - 33-9048

BASKETMESH END20 MICRON400DS - 33-9046

ASSYBSKT ONLY50 MESH400DS - 33-9029

ACC KIT17MM LEAD HOLDER10ML400DS - 33-9025

ASSYPEEK BSKT400DS - 33-9022

SILICONE TUBING 1/8 IN ID 25 FT - 33-9019

ASSYTEMPERATURE CALIBRATION10ML400DS - 33-9018

ASSY10ML STENT HOLDER400DS - 33-9012

VIAL12X32PRE-CRIMPEDQTY 100 PK100 - 33-9010

ASSY5ML STENT HOLDER400DS - 33-9009

TOOLEXTRACTION400DS - 33-9007

DISSOLUTION CELL5ML400DS - 33-9005

UNION TEE STAINLESS STEEL - 325-185-HSP

UNION FF 6MB - 325-062-HSP

ZERO DEAD VOLUME UNION - 325-045-HSP

OIL DRAIN KIT FOR MIST FILTER - 3162-1057

CENTERING RING WITH O-RING - 3162-0110

WOOL COPPER BOX - 3162-0083

CO2 CRYO IN-LINE FILTER - 3150-0602

FRIT PARTICLE BEAM PACK PK10 - 3150-0559

BSKT ASSYTITANIUMAPP7BIODIS - 27-8622

MINI BSKT 50 MESH THD BIO-DIS - 27-8621

MINI BSKT 40 MESH THD BIO-DIS - 27-8620

MINI BSKT SHAFT THD ALZA BIO-DIS - 27-8600

RECIP-DISK ANGLED 142INBIODIS III APP7 - 27-8036

DISK-ALZA TYPE 70CM SQBIODIS III - 27-8020

DISK-ALZA TYPE 16CM SQBIODIS III - 27-8005

CONVERSION KIT1000ML BIO-DIS III(OPT) - 27-6105

VESSEL CARRIER 6X7 50ML BIO-DIS - 27-6050

VES CAR2X7300MLBIODISIII(SEENOTE)SET - 27-6000

O-RING.987 I.D. - 2740236100

TITANIUM BASKET KIT1 POSBD III APP7 - 27-3007

RPLCMNT ACRYLIC ROD APP7 BIO-DIS - 27-3002

TRANSDERMAL HOLDER KIT1 POSBD III APP7 - 27-3001

ACRYLIC ROD KIT1 POSBIO-DIS III APP7 - 27-3000

TUBING KIT APP 3/7 1/4-28 FITTINGS - 27-0127

SAMPLING ACC (8 POS) KIT BIODIS(FORVK80 - 27-0126

SPNG HLDR1INLX50INIDX031INWIRECENTER - 27-0109

SPNG HLDR60INLX25INIDX031INWIRECNTR - 27-0108

SPNG HLDR96INLX33INIDX031INWIRECNTR - 27-0107

SPNG HLDR140INLX31INIDX040INWIRECTR - 27-0106

SPRING HLDR1INLX50INIDX031INWIRE DIA - 27-0104

SPNG HLDR60INLX25INIDX031INWIRE DIA - 27-0103

SPNG HLDR140INLX31INIDX040INWIRE DIA - 27-0101

SAMPLE LOOP 3ML DEACTIVATED - 2321700004

COMPRESSION SPRING 0.088 - 2170925500

PRESSURE GAUGE KIT 0-60PSI - 19363-60506

JUMPER TUBE 360MM - 19361-80120

COOLING TOWER ASSEMBLY - 19320-80625

FPD/FPD+ PHOSPHORUS FILTER - 19256-80010

FPD EXIT TUBE ASSEMBLY - 19256-60700

FILTER SPACER USED ONLY W PN 1000-1437 - 19256-20910

COLLET - GLOW PLUG - 19256-20690

0-100 PRESSURE REGULATOR - 19246-60690

BACKPRESSURE REGULATOR 0-30 PSI (100KPA) - 19246-60570

REGULATOR 0-15 BACK PRESSURE - 19246-60560

PRESSURE REGULATOR 0-100 PSI - 19246-60550

DUCK BILL 10/PK - 19245-40050

200 UM NARROW BORE INSERT 1-RING - 19245-20510

JUMPER WELDMENT - 19243-80550

ADAPTER FOR USE 1/4IN OD GLASS LINER - 19243-80540

ADAPTER PACKED PORT LINER 1/4IN - 19243-80520

SEPTUM NUT NONPURGING - 19243-60500

DET INS LINER 1/4IN - 19231-80530

PTFE CHIMNEY FLAME IONIZATION DETECTOR - 19231-21050

NUT COLLECTOR - 19231-20940

GC INSTALLATION TOOL KIT FOR 7820 - 19199T

GC INSTALLATION KIT WITH GAS PURIFIER - 19199C

GLASS TUBE 25MM OD - 1900-0013

CrossLab Split Liners for GC, Agilent Technologies - 18740-60840, Inlet liner, split, straight, with cup, glass wool and packing (for manual injections)

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4020, Full flow filter, UHMWPE, 70 µm, red, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

Mark 7 Spray Chamber Supplies, Agilent Technologies - 1510226700, Nut Lock M12X0.5

Crosslab Vespel Ferrules for GC, Agilent Technologies - 15-0285-016, Ferrule, Vespel, for top of Tekmar purge and trap, maximum 280 °C

BASKET SHAFT SPIN ON/OFF O-RING 1L - 13-3632

BASKET SHAFT FOR BOLUS 24 IN - 13-3630

BASKET SHAFT 3-CLIP 24 IN - 13-3629

BASKET SHFT 3-CLIP PTFE-COATED 21 IN - 13-3622

BASKET SHAFT 3-CLIP 145 IN - 13-3615

RECEPTOR SHAFT (UPPER) 24 IN - 13-3614

PADDLE PTFE-COATED 24 IN - 13-3596

PADDLE MINI E-POLISHED 145 IN - 13-3593

PADDLE MINI PTFE-COATED 145 IN - 13-3592

VF VESSEL 1L TRUALIGN VERIFIED - 13-0010

PRNTR CARTRIDGE DOTMATRIX PURPLE - 12-9998

PRNTR CARTRIDGE DOTMATRIX PRNTRBLK - 12-9993

HEIGHT GAGEROTATING CYLINDER - 12-7335

HEIGHT GAUGE BASKETS (ATTACHES TO BSKT) - 12-7280

HEIGHT GAUGE PADDLES (ATTACHES TO PDL) - 12-7270

CENTER RING/EVAP CVR100/200MLTA708DS - 12-6368

EVAP CVRSOLIDEASEALIGN - 12-6330

EVAP CVRTCV CONVERSION7000/7010 - 12-6327

EVAPORATION COVER AMBER/EASEALIGN - 12-6320

EVAPORATION COVERAMBER DDM/EASEALIGN - 12-6311

EVAPORATION COVER DDM/EASEALIGN - 12-6310

EVAPORATION COVER BASKET/EASEALIGN - 12-6305

ALIGNMENT PLATE 1000ML VESSEL GROUND - 12-6115

VESSEL1000MLGROUNDCONVERSION KIT - 12-6100

EASEALIGN LOCATING PINS PK12 - 12-6065

EASEALIGN VESSEL RETAINER VK7000/VK7010 - 12-6050

PEAK VESSEL 1000ML COLORED GLASS - 12-5505

PLASTIC VESSEL 1000ML - 12-5200

VESSEL200ML FLAT BOTTOMTAENH CELL708 - 12-5170

GLASS VESSEL2L PEAK TRUALIGN W/COLLAR - 12-5159

VER GLASS VES2L TRUALIGN W/COLLARAMBER - 12-5158V

GLASS VES2L TRUALIGN W/CLRCOL GLASS - 12-5158

VER VESSEL2L TRUALIGN W/COLLAR - 12-5157V

VESSEL2L TRUALIGN W/COLLAR - 12-5157

GLASS VESSEL1L PEAK TRUALIGN W/COLLAR - 12-5153

VESSEL 1L TRUALIGN W/COLLAR - 12-5149

GLASS VES200ML TRUALIGNCOLORED GLASS - 12-5148

GLASS VESSEL200ML TRUALIGN - 12-5147

GLASS VES100ML TRUALIGNCOLORED GLASS - 12-5146

GLASS VESSEL100ML TRUALIGN - 12-5145

GLASS VES 200ML FLAT BOTTOM(ENHAN CELL - 12-5055

GLASS VESSELS 100ML - 12-5040

TRUCENTER VESSEL200ML WITH COLLAR - 12-5034

200ML VESSEL V-SERIES NO COLLAR - 12-5033

VERIFIED VES1L COLORED GLASSDIMS ONLY - 12-5010V

GLASS VESSEL COLORED GLASS 1000ML - 12-5010

TRANSDERMAL PATCH HOLDER 50CM SQ - 12-4310

TRANSDERMAL PATCH HOLDER 25CMSQ - 12-4300

TOOL TO DISASSEMBLE DISK ASSY(12-4230) - 12-4232

SCREENS(REPLACEMENT)FOR 12-4230(PK100) - 12-4231

DISK W/SCREEN56MM OPENING - 12-4230

TOOL TO DISASSEMBLE DISK ASSY(12-4200) - 12-4211

REPLACEMENT SCRNSDISK ASSY(PK100) - 12-4210

DISK W/SCREEN APPARATUS 5 - 12-4200

HOLDER ONLY WOOD APPARATUS - 12-4150

PUNCH WOOD APPARATUS - 12-4140

SURFACE PLATE WOOD APPARATUS - 12-4130

WOOD INTRINSIC(0125CMSQ)DISS APP - 12-4110

WOOD INTRINSIC DISSOLUTION APPARATUS - 12-4100

INSERTCUP(20X82DP)MMFORSUSP(FOR12-4050 - 12-4060

INSERTCUP(175X82DP)FORSUSP(FOR12-4050 - 12-4055

WGHTDHLDR(FOR SUSP)572CMOD 252CMIDPTFE - 12-4050

ALIGN TOOL 2 CM SQ ENHANCER CELL 1 CM - 12-4021

ALIGN TOOL 4 CM SQ ENHANCER CELL 1 CM - 12-4020

ADJUSTMENT TOOL ENHANCER CELL - 12-4015

ENHANCER CELL KIT(4CM SQ) - 12-4005

ENHANCER CELL 2 CM SQ - 12-4001

ENHANCER CELL 4CM SQ - 12-4000

GLASS SYRINGE 20CC - 12-3230

ADJ GAUGE W/O CANNULA 775 IN 708/709 - 12-3224

ADJ GAUGE W/O CANNULA 475 IN 708/709 - 12-3223

CANNULA W/ ADJ GAUGE 775 IN 708/709 - 12-3222

CANNULA W/ ADJ GAUGE 475 IN 708/709 - 12-3221

CANNULA PEEK LOW VOL - 12-3219

BENT CANNULA W/ADJUSTABLE GAUGE 775 - 12-3216

BENT CANNULA W/ADJUSTABLE GAUGE 475 - 12-3215

BENT CANNULA W/LUER 475IN - 12-3200

CAPSULE WGHTROBTC TYPEW/STL INSERT PRNG - 12-3056

CAPSULE WEIGHT ROBOTIC TYPE - 12-3055

CAPSULE WEIGHT VK 3 PRONG - 12-3050

CAPSULE WEIGHT 316 SS 032DIA 50FT WIRE - 12-3000

RACK COLLECTION VAC ELUT-20 13X100MM - 12234508

BOLUS BASKET 40 MESH 381 MICRON - 12-2185

BOLUS BASKET 20 MESH 864 MICRON - 12-2180

BASKET50 MESH 280 MICRON - 12-2155

BASKET100 MESH 140 MICRON - 12-2154

BASKET150X150 MESH 104 MICRON - 12-2152

BASKET270 MESH 53 MICRON - 12-2151

BASKET325X2300 MESH 5 MICRON - 12-2146

STORAGE RACKSPIN ONOFF SHAFTS - 12-1352

PADDLE BASKET SUPPORT RACK - 12-1350

ASPEC CAPS 3ML-BLUE PK1000 - 12131035

ASPEC CAPS 1ML-YELLOW PK1000 - 12131034

CONSTANT PRESSURE HEAD BOTTLE SIPS 1L - 110766690

FLAME SHIELD WITH VIEWING WINDOW - 110628090

CONSTANT PRESSURE HEAD BOTTLE SIPS 500ML - 110533590

METERING VALVE BRASS 1/8IN - 0101-0403

NUT-COUNTER BORE 1/16IN - 0100-1511

PLUG 1/16IN SS - 0100-1315

CONNECTOR SS 1/4IN NPT TO 1/8IN - 0100-1189

TEE 1/16IN SS TUBE OD - 0100-0782

ADAPTER BRASS 1/8IN - 0100-0420

CONNECTOR BRASS 1/4IN NPT - 0100-0208

BULKHEAD UNION SS 1/8IN - 0100-0133

BULKHEAD UNION BRASS 1/8IN - 0100-0132

TUBING NUT BRASS 1/8IN - 0100-0058

EXP® Fittings for 10-32 Ports and 1/16 IN. Stainless Steel Tubing, Optimize Technologies. EXP® Fittings for 10-32 Ports and ¹/6 IN. Stainless Steel Tubing, Optimize Technologies - 15-20-03834, EXP® Standard Hex-Head Nut & Titanium Hybrid Ferrules, SS and PEEK

HPLC Syringe Filters 25mm. Polypropylene housing, 0.45um PVDF membrane. Color Code: red. Supplied with certificate of analysis

HPLC Syringe Filters 13mm. Polypropylene housing, 0.45um PVDF membrane. Color Code: red. Supplied with certificate of analysis

HPLC Syringe Filters 4mm. Polypropylene housing, 0.45um PVDF membrane. Color Code: red. Supplied with certificate of analysis

HPLC Syringe Filters 25mm. Polypropylene housing, 0.45um Regenerated Cellulose membrane. Color Code: brown. Supplied with certificate of analysis

HPLC Syringe Filters 13mm. Polypropylene housing, 0.45um Regenerated Cellulose membrane. Color Code: brown. Supplied with certificate of analysis

HPLC Syringe Filters 13mm. Polypropylene housing, 0.45um Regenerated Cellulose membrane. Color Code: brown. Supplied with certificate of analysis

HPLC Syringe Filters 4mm. Polypropylene housing, 0.45um Regenerated Cellulose membrane. Color Code: brown. Supplied with certificate of analysis

HPLC Syringe Filters 13mm. Polypropylene housing, 0.45um PTFE membrane. Color Code: yellow. Supplied with certificate of analysis

HPLC Syringe Filters 4mm. Polypropylene housing, 0.45um PTFE membrane. Color Code: yellow. Supplied with certificate of analysis

HPLC Syringe type Multi-depth prefilters 25mm. Polypropylene housing, 0.45um nylon membrane. Color : black with white lettering. Good for viscous or highly particuatled soltuions. Excellent for Environmental and Pharmaceutical labs. Supplied with certificate of analysis

HPLC Syringe Filters 25mm. Polypropylene housing, 0.45um nylon membrane. Color Code: green. Supplied with certificate of analysis

HPLC Syringe Filters 13mm. Polypropylene housing, 0.45um nylon membrane. Color Code: green. Supplied with certificate of analysis

HPLC Syringe Filters 13mm. Polypropylene housing, 0.45um nylon membrane. Color Code: green. Supplied with certificate of analysis

HPLC Syringe Filters 25mm. Polypropylene housing, 0.45um Cellulose Acetate membrane. Color Code: orange. Supplied with certificate of analysis

HPLC Syringe Filters 25mm. Polypropylene housing, 0.22um Regenerated Cellulose membrane. Color Code: grey. Supplied with certificate of analysis

HPLC Syringe Filters 13mm. Polypropylene housing, 0.22um Regenerated Cellulose membrane. Color Code: grey. Supplied with certificate of analysis

HPLC Syringe Filters 25mm. Polypropylene housing, 0.22um PTFE membrane. Color Code: blue. Supplied with certificate of analysis

HPLC Syringe Filters 25mm. Polypropylene housing, 0.22um PTFE membrane. Color Code: blue. Supplied with certificate of analysis

HPLC Syringe Filters 13mm. Polypropylene housing, 0.22um PTFE membrane. Color Code: blue. Supplied with certificate of analysis

HPLC Syringe Filters 25mm. Polypropylene housing, 0.22um nylon membrane. Color Code: purple. Supplied with certificate of analysis

Tin Capsules. For analysis of nonvolatile solid samples

Siltite Fingertite Inj Base Seal Pack2.

Siltite Fingertite Female Nut Pack5.

Siltite Fingertite Blanking Ferrule Pack 2.

Siltite Fingertite Ferrule 0.5 Mm Pack10.

Siltite Fingertite Ferrule 0.4 Mm Pack10.

Siltite Fingertite Shimadzu 17A Inj / Ms Starter Kit.

Siltite Fingertite Shimadzu 17A Inj / Fid Starter Kit.

Siltite Fingertite Shimadzu 2010 Inj / Ms Starter Kit.

Siltite Fingertite Shimadzu 2010 Inj / Fid Starter Kit.

Siltite Fingertite Inj / Ms Starter Kit.

Siltite Fingertite Inj / Fid Starter Kit.

Zirconium (Zr) Atomax 1.5 Lamp.

Zinc (Zn) Atomax 1.5 Lamp.

Yttrium (Y) Atomax 1.5 Lamp.

Vanadium (V) Atomax 1.5 Lamp.

Thulium (Tm) Atomax 1.5 Lamp.

Tellurium (Te) Atomax 1.5 Lamp.

Terbium (Tb) Atomax 1.5 Lamp.

Tantalum (Ta) Atomax 1.5 Lamp.

Tin (Sn) Atomax 1.5 Lamp.

Samarium (Sm) Atomax 1.5 Lamp.

Scandium (Sc) Atomax 1.5 Lamp.

Ruthenium (Ru) Atomax 1.5 Lamp.

Rhodium (Rh) Atomax 1.5 Lamp.

Rhenium (Re) Atomax 1.5 Lamp.

Praseodymium (Pr) Atomax 1.5 Lamp.

Lead (Pb) Atomax 1.5 Lamp.

Phosphorus (P) Atomax 1.5 Lamp.

Niobium (Nb) Atomax 1.5 Lamp.

Sodium (Na) Atomax 1.5 Lamp.

Molybdenum (Mo) Atomax 1.5 Lamp.

Manganese (Mn) Atomax 1.5 Lamp.

Magnesium (Mg) Atomax 1.5 Lamp.

Lutetium (Lu) Atomax 1.5 Lamp.

Lanthanum (La) Atomax 1.5 Lamp.

Potassium (K) Atomax 1.5 Lamp.

Indium (In) Atomax 1.5 Lamp.

Holmium (Ho) Atomax 1.5 Lamp.

Germanium (Ge) Atomax 1.5 Lamp.

Gadolinium (Gd) Atomax 1.5 Lamp.

Gallium (Ga) Atomax 1.5 Lamp.

Iron (Fe) Atomax 1.5 Lamp.

Europium (Eu) Atomax 1.5 Lamp.

Erbium (Er) Atomax 1.5 Lamp.

Dysprosium (Dy) Atomax 1.5 Lamp.

Copper (Cu) Atomax 1.5 Lamp.

Chromium (Cr) Atomax 1.5 Lamp.

Cobalt (Co) Atomax 1.5 Lamp.

Cadmium (Cd) Atomax 1.5 Lamp.

Calcium (Ca) Atomax 1.5 Lamp.

Bismuth (Bi) Atomax 1.5 Lamp.

Beryllium (Be) Atomax 1.5 Lamp.

Barium (Ba) Atomax 1.5 Lamp.

Boron (B) Atomax 1.5 Lamp.

Arsenic (As) Atomax 1.5 Lamp.

Aluminum (Al) Atomax 1.5 Lamp.

Silver (Ag) Atomax 1.5 Lamp.

DIGIPROBE 10IN 25CM - N9308072

24 Position Rack For Spb-50-24, 50 Ml.

15 Position Rack For Spb-100-30, 100 Ml.

12 Position Rack For Spb-100-12, 100 Ml.

Digitube, Nrl, 100Ml (Pk300).

Digiprobe Holder, For 100Ml Tubes.

Stopcock, Polycarb.

Screw Caps, Clear, For Digitube S Qty.250.

Screw Caps, Red, For Digitube S Qty.250.

Screw Caps, Orange, For Digitube S Qty. 250.

Tube Adapter 50 Ml (Pk/6).

Digitube,Quartz,62.5 Ml, Uncalibrated(Pk/6).

Digitube, Borosi, 100Ml, 225Mm For 50 Ml Block (Pk/6).

24 POS. RACK 50-48/50-72 50ML - N9308042

Spb Probe Watch Glass (Replacement) For 50 Ml Tubes Qty.25.

Digitubes, 50 Ml Nrl (750).

Fume Hood Ii For Autosampler.

Digifilter Manifold.

Field Filtration Kit 0.45 For 50 Ml Digitube S.

Digifilter 1.0 Micron For 50 Ml Digitube S Qty. 100.

Digifilter 0.45 Micron For 50 Ml Digitube S Qty. 100.

Disposable Watch Glasses, 100 Ml Qty.500.

Tempset Probe For 100 Ml Tubes.

PTFE Screw Cap For PTFE Tubes, N9308024 Replaces Blue Cap Supplied Qty.6.

PTFE Digestion Tube 50 Ml With Polypropylene Screw Cap Qty.6.

Spb Probe 6In For 50Ml Tubes.

Start Up Kit For Spb 50-24.

Digitube S 100 Ml With Racklock Qty. 300.

Start Up Kit For Spb 100-42.

Digitube S 50 Ml With Racklock Qty.750.

Disposable Watch Glasses, 50 Ml Pkg. 1,000.

Start Up Kit For Spb 50-48.

Fume Hood For Spb 50-72 / 100-42.

Fume Hood For Spb 50-24 / 100-12, 50-48 / 100-30.

Rechargeable desiccant Kit. Includes four desiccant cages. Two to be used in the instrument at any one time.

Replacement laser kit for Spectrum 100. Includes Laser head (HeNe) and power supply.

Pre-aligned replacement Mid-IR source kit. Includes Mid-IR source element and source mount for Spectrum 100

Lambda Bio\XLS SD Memory Card Module Option. Included with SD card models on the Lambda XLS\XLS+ and Bio+.

Cuvette Rack.

Hellma Traycell 0.1Mm (Factor 100) Cap.

Hellma Traycell 0.2Mm (Factor 50) Cap.

PMMA-Cuvette Macro, 10mm pathlength, 2.5-4.5 mL volume (Pk 1000).

PS-Cuvette Macro, 10mm pathlength, 2.5-4.5 mL volume (Pk 1000).

UV-Cuvette Macro, 10mm pathlength, 2.5-4.5 mL volume (Pk 100).

UV-Cuvette Semi-micro, 10mm pathlength, 1.5-3.0 mL volume (Pk 100).

Green Cap - UV-Cuvette Micro, (Pk 100).

Blue Cap - UV-Cuvette Micro, (Pk 100).

UV-Cuvette Micro, 10mm pathlength, 70-550 volume (Pk100).

Quartz SUPRASIL, 40mm pathlength, 14.0 mL volume.

KBr Press, 15 Ton. Used for the production of KBr discs.

KBr Disc Starter Pack for Solids (No Press included). Contains an evacuable potassium bromide die for the preparation of 13mm diameter pellets, a pellet holder and adjustable mount.

KBr Disc Starter Pack for Solids (Includes KBr Press). Contains an evacuable potassium bromide die for the preparation of 13mm diameter pellets, a pellet holder and adjustable mount, 15-tonne hydraulic press and 100g of research-grade KBr powder.

KIT GP FTIR SAMPLING W/MAG HLDR F/SPECT - L1365312

Liquid and Mull Complete Sampling Kit. FT-IR spectroscopy and has been designed to provide all the necessary equipment for handling liquids and mulls. A magnetic film holder is also included.

Miniature Diamond Anvil Cell.

PerkinElmer 5X Reflecting Beam Condenser. Allows for the analysis of small quantities of materials such as paint flakes. The horizontal sample stage can accommodate standard 13-mm sample holders with different size apertures, or slits for the mounting of single fibers.

PerkinElmer Variable-Angle Specular Reflectance Accessory. This accessory allows measurement of reflectance spectra at angles of incidence between 15o and 80o . Includes two sample stages, one for high angle measurements and one for use with 2-, 5- and 10-mm aperture masks which are included.

Diamond Abrasive Sticks for Diffuse Reflectance Accessory.

Silicon Carbide Abrasive Pads for Diffuse Reflectance Accessory.

Metal-coated Abrasive Sticks for Diffuse Reflectance Accessory.

Metal-coated Abrasive Pads for Diffuse Reflectance Accessory.

Rechargeable Desiccant Kit. For Spectrum 1000/Spectrum Rx/Spectrum Bx/ Paragon 500/Paragon 1000/Model 1600.

Peltier temperature controlled single cell holder for the sample position. Also included are a reference position cover, power supply, power cables and UserGs Guide. Requires the Lambda 25, 35 45 Accessory Board

Peltier temperature controlled single cell holder for the sample position. Also included are a reference position cover, power supply, power cables and UserGs Guide. Requires the Lambda 25, 35 45 Accessory Board

Fiber Optic Dip Probe, 200 G 1100 nm, 15mm 316SS probe. Requires but does not include, Transfer-optic, Light shield and probe tip.

Transfer optics for Monofibers. Fiberoptic transfer holder for Lambda 25/35/45. Requires pair of monofibers 2x2 m or 2x10 m and/or optrode.

Spare Standard Mirror. For specular reflectance accessory and reflectance accessory.

Reflectance Accessory. Variable angle of incidence (15 to 70 degrees) for sample position.

Relative Specular Reflectance Accessory, 6 Degrees. For reflectance or thickness measurements. 6 degree angle of light incidence.

Powder Sample Holder Set. For measurement of powder samples.

Tubing Kit Peristaltic. For Peristaltic Sipper PESI.

Sample Tray, 21 position. For use with S10 Autosampler.

Sample Tray, 60 position. For use with S10 Autosampler.

SAMPLE VESSEL 8 ML PK500 - B0508901

8+8 cell changer. Automatic water thermostattable automatic linear cell changer for 8 samples and 8 references. Consisting of B2000186 Linear Transport, B2000310 reference kit and 2 x B2205411 8cell holders. Controlled through Lambda 25/35/45 stand-alone instrument.

8-CELL HOLDER WATER THERMO - B2205411

Automatic Linear Transport for Lambda 25/35/45 - Basic linear transport unit. Can be combined with water thermostattable 8-cell holders (B2205411), long pathlength 5-cell holders (B0089439), research peltier system (C6952945).

Long Pathlength 5-Cell Holder. For B2000186 linear transport in sample or reference position. Accommodates 5 cells of up to 50 mm pathlength.

HOLDER SAMPLE VRBL-ANG F/LAMBDA-10 SPEC - B0152471

Solid Sample Holder. Minimum sample size 10 x 15 mm. Maximum sample thickness 5 mm.

Test Tube Holder. For tubes with diameters between 11 and 17 mm.

Cell Holder, Water-Thermostatted. Accepts one rectangular cell with 10 mm pathlength. Requires (but does not include) Water Circulator.

Standard Cell Holder. Accepts one rectangular or microcell with 10 mm pathlength (as standard holder for Lambda instruments included in shipment).

Sample Compartment Windows as supplied with Lambda 25/35/45. Set of 2.

BAG TRIANGLE DEIONIZER LE F/H GENERATOR - N9307098

Deionizer Bag, PerkinElmer - N9307097, Deionizer bag for PGX-H2 Plus generator

REFILL AUTO F/HYDROGEN GENERATOR - N9307096

GENERTR-ULTRA 0 AIR 6.0 L/MIN - N9307083

GENERATOR ZERO AIR W/O CMPRSR 30L/MIN - N9307079

GENERATOR ZERO AIR W/O CMPRSR 6L/MIN - N9307077

GENERATOR ZERO AIR W/O CMPRSR 3L/MIN - N9307076

Zero Air Generator, 1.5 L/min, PerkinElmer - N9307075, Zero air generator - 1.5 L/min

TUBE TD GLAS CARBOTRA C/B PK10 - N9307065

TUBE TD GLAS CARBOSIEV PK10 - N9307064

TUBE ATD P-PKD SAMP CHROMASORB GL PK10 - N9307063

TUBE ATD P-PKD SAMP TENAX TA GL PK10 - N9307062

TUBE ATD P-PKD SAMP TENAX GR GL PK10 - N9307061

TUBE ATD P-PKD SAMP UN-COND GL PK10 - N9307058

Tube Atd St Carbotrap C/B.

HARDWARE MANIFOLD/MOUNTING F/GC - N9306139

TRAP H2O/HC SS 1/8INSS - N9306118

TRAP H2O/HC SS 1/8IN BR - N9306117

TRAP HE TRIP GLAS 1/8IN SS KT - N9306116

TRAP GL TRIPLE HE SPECIFIC 1/8 BRS CONR - N9306114

TRAP HE SPECIFIC TRIPLE CLICK ON F/GC - N9306113

TRAP SPEF HE O2/HYDC/MOIST W/ 1/8 CONR - N9306112

TRAP O2/MOIST/HYDROCR 1/8INSS - N9306111

TRAP O2/MOIST/HYDC 1/8 BRS CONR SS F/GC - N9306110

TRAP O2/MOISTURE 1/8IN SS KIT - N9306109

TRAP O2/MOISTURE 1/8INBRASSKIT - N9306108

TRAP GL TRIPLE O2/MOIST/HYDC HE SPEFSS - N9306107

TRAP SPEF HE O2/HYDC/MOIST SS F/GC - N9306106

TRAP MOIST/HYDROCARBON INLINE SS F/GC - N9306105

TRAP OXYGEN/MOIST/HYDC INLINE SS F/GC - N9306104

TRAP OXYGEN/MOIST INLINE SS F/GC - N9306103

TRAP HYDC INLINE STAINLESS STEEL F/GC - N9306102

TRAP OXYGEN INLINE STAINLESS STEEL F/GC - N9306101

TRAP MOISTURE INLINE GC H20 STAINLESS S - N9306100

Cold Traps, PerkinElmer - N9306096, SilTiteâ„¢ Nuts

Cold Traps, PerkinElmer - N9306095, SilTiteâ„¢ Ferrule (GC/MS) 0.8 mm

Cold Traps, PerkinElmer - N9306094, SilTiteâ„¢ Ferrule (GC/MS) 0.5 mm

Cold Traps, PerkinElmer - N9306093, SilTiteâ„¢ Ferrule (GC/MS) 0.4 mm

KIT FERRULE STARTER SILTITE 0.8MM PK10 - N9306092

KIT FERRULE STARTER SILTITE 0.5MM PK10 - N9306091

KIT FERRULE STARTER SILTITE 0.4MM PK10 - N9306090

SEAL ROTOR FLOME INJECTOR VALVE PEEK - N9306068

DESICCANT REFILL PG-H2 F/GC - N9306065

KIT PGX-H2 DESICCANT/FTG REFILL CATR - N9306064

Replacement Cartridge for Advanced Filter System, PerkinElmer - N9303964, Replacement cartridge for advanced filter system

Advanced Filter System, PerkinElmer - N9303963, Advanced filter system

SEPTUM MERLIN MICROSEAL - N9303345

LINER INJECTOR GLASS 2X4X86.2MM F/GCPK5 - N9302949

NUT TM40HS HEAD/VALCO MALE 1/16IN - N9302832

Column Cutters, Perkin Elmer. Column Cutters, PerkinElmer - N9301376, Column Cutter

TUBING PIM DEACT FSD-SL CAPY 5MX.45MM - N9301358

FILTER HYDROPHOBIC PTFE F/MOB-PHPK100 - N9301068

FILTER FP VERICEL HYDROPHILIC PK100 - N9301067

KIT PHARM OVI APL CNSBL 20MM ELET CRIMP - N9300655

GC Capillary Column Connectors, PerkinElmer - N9300059, 1/16 IN., Nut

KIT HEADSPCE CONSUM START MINI - N6710197

KIT HEADSPACE CNSBL STARTER TURBOMATRIX - N6710195

TRAP BLOCKING TURBOMATRIX F/GC - N6701170

Cold Traps, PerkinElmer - N6200150, Carbopack® C Packed Trap

KIT VIALS AUTOSAMPLER STARTER - N6120105

KIT ADAPTER/WIDE-BORE F/0.53 CAPY COL - N6120001

LINER GC PSS ON-COL INJECTOR - N6101539

Cold Traps, PerkinElmer - N6101474, Regulator 0 - 60 psig

LINER GC GLASS WIDE BORE - N6101375

LINER 2 MM SP/SPL GLASS - N6101372

SYRINGE KIT BFR TUBIN 1ML 2ML - N2936054

SYRINGE KIT BFR TUB 500UL 1ML - N2936053

SYRINGE KIT TUB 100UL 200UL - N2936051

NEEDLE AIR GUIDE 62MM - N2936000

Xenon Lamps for Fluorescence Detectors, PerkinElmer - N2922082, Xenon Lamp for Series 200 and 200a Fluorescence Detector

FLOWCELL SERIES 275 HRES - N2920070

High Pressure Analytical Static Mixers, Perkinelmer - N2911205, In Line High Pressure Mixer, SS, 500 µl

High Pressure Analytical Static Mixers, Perkinelmer - N2911203, In Line High Pressure Mixer, SS, 350 µl

High Pressure Analytical Static Mixers, Perkinelmer - N2911202, In Line High Pressure Mixer, SS, 250 µl

High Pressure Analytical Static Mixers, Perkinelmer - N2911201, In Line High Pressure Mixer, SS, 150 µl

High Pressure Analytical Static Mixers, Perkinelmer - N2911200, In Line High Pressure Mixer, SS, 50 µl

NEEDLE ASBY INLINE HGPR SS 150UL - N2911173

FLOWCELL BINARY TEE HIGH PRESSURE 150UL - N2911171

Pump Bio Conversion Kit. This kit contains all of the parts necessary to convert an isocratic, binary or quaternary pump for bio applications. also includes piston seal wash function. conversion and installation are not included and must be performed by a service engineer at the customers site

Zero Dilution Inner Liner, 2 ext.Ø.×73L mm, PerkinElmer - N1011446, Zero Dilution Liners, with PSS Inlets for Headspace Analysis. Zero dilution inner liner

Zero Dilution Glass Outer Liner, 2 mm, PerkinElmer - N1011445, Zero Dilution Outer Liner for Headspace Analysis. Zero dilution glass outer liner

BOOK STATIC HDS THEORY/PRACTICE F/GC - N1011210

Empty Sample Tubes, PerkinElmer - M0413598

Empty Sample Tubes, PerkinElmer - M0413597

TRAY 110 HI-CAPACITY SAMPLE TURBOMATRIX - M0413593

TRAY 40 MID-RANGE SAMPLE TURBOMATRIX - M0413592

KIT THERMAL DESORBER STARTER - M0413541

Cold Traps, PerkinElmer - L4275108, Air Monitoring Trap

Cold Traps, PerkinElmer - L4271205, Cold Trap Removal Tool

Cold Traps, PerkinElmer - L4271106, Empty Trap

TUBE EMPTY ATD SAMPLE W/O CAP SS PK100 - L4270129

TUBE EMPTY ATD SAMPLE W/O CAP SS PK10 - L4270128

Borosilicate Glass Sample Tubes, PerkinElmer - L4071594, Glass sample tubes

FERRULE F/GC PTFE F/ 1/4 IN BRASSPK5 - L1003015

NEEDLE HS100 SAMPLE IRIDIUM - B0144169

CAP BRASS LONG-TERM STORAGE FOR TUBE - 09908851

Syringe Filters, PerkinElmer - 02542886, PTFE Syringe Filter, Hydrophobic

Syringe Filters, PerkinElmer - 02542885, PTFE Syringe Filter, Hydrophobic

Syringe Filters, PerkinElmer - 02542884, PTFE Syringe Filter, Hydrophobic

Syringe Filters, PerkinElmer - 02542882, Nylon Syringe Filter

Syringe Filters, PerkinElmer - 02542881, Nylon Syringe Filter

Syringe Filters, PerkinElmer - 02542880, Nylon Syringe Filter

Filter Syr Pvdr 13Mm.45U Pk100.

Pyris 1 TGA Autosampler Platinum Sample Pan Kit Pkg/5.

UATR Shoe-6 OD Flat End.

FEP-Replacement Tubing with one short screw fitting, 500mm long. FEP-Replacement Tubing with one short screw fitting, 500 mm long

FEP-Replacement Tubing with one long screw fitting, 500mm long. FEP-Replacement Tubing with one long screw fitting, 500 mm long

Injector Bore, Quartz 2mm, with ball joint For use with pass-through injector. Standard on the ELAN DRC

Cold Trap Packing Tool. .

Quartz Injector, Ball Joint, 1.5 mm i.d.. Lower sample flow rates for DRCs.

High Efficiency Demountable Quartz Torch for ELAN 9000/6X00/DRCs.

Quick-Change Torch Module, includes complete ICP torch, mounting block, 2 mm alumina injector, cyclonic spray chamber, and concentric nebulizer

Top-Plate Universal ATR-3 Reflection for PerkinElmer Spectrum One FTIR.

Liner/Nozzle Replacement Tool for Flame Ionization Detector (FID). Allows easy removal of glass liners from injector port

GemTip Replacement Nebulizer Tips, Not for Cross-Flow II.

TGA 7 Standard Furnace. .

Test Mix-GC Det Evaluation. .

Nebulizer, Stainless Steel body, For PerkinElmer Models Aanalyst 100/300/700/800, 5100(PC), 5000, 3300, 3110, 3100 and Atomic absorption spectroscopy

Spacer, PTFE, Semi-Demountable Cells, Thickness: 1.0mm, for the analysis of less viscous samples.

Semi-Demountable Assorted Spacers. Includes 2 each of : 0.025 thick Lead Spacers (L1270301), 0.05mm thick PTFE Spacers (L1270402), 0.1mm thick PTFE Spacers (L1270404), 0.2mm thick PTFE Spacers (L1270408), 0.5mm thick PTFE Spacers 9L1270409), 1mm thick PTFE Spacers (L1270410)

PSS Siltek Deactivated Split/Splitless Liner with Wool 2mm.

Injector Support/Torch Base, Assembled with O-Rings.. .

Bead Assembly for NPD Detector. .

Single Position Water Thermostatted Cell Holder for a 10 mm pathlength cell, water thermostatted.

Service Kit-Td O-Ring 018 Viton Pk/5. .

Series II Replacement Ion Lens. .

PerkinElmer Series 200 Pump Maintenance Kit. Includes: Fuses, Seals, O-Rings, Seal Tools..

Cap Septum for Capillary Injector, Progmed-Temperature On-Column Inlet and Split/Splitless Inlet Systems, and Packed Column Injectors

Screw Plug 1/4in (6.4mm) External Screw Thread. .

Spray Chamber. Ryton Spray Chamber for Optima 3000 and SCR, made from corrosion-resistant Ryton, which is inert to most mineral acids including HF and Aqua Regia.

RF Coil Assembly for Optima 3000 XL/DV. No further information is available for this product..

Packing Retaining Gauzes for ATD 400, Pkg 100. .

Sodium Chloride Semi-Demountable Cell Window, Thickness: 4mm, One Pair.

Cell window. Potassium Bromide Semi-Demountable Cell Window, Thickness: 4mm, One Pair, good resistance to mechanical shock, cleaved, used up to 300 degree C.

Cell Window. Calcium Fluoride Semi-Demountable Cell Window, Thickness: 4mm, One Pair. Calcium Fluoride (CaF2)\n CaF2 is extremely hard and stable.

50 mm pathlength, PTFE lid, Special Optical Glass, 17.5 mL cell volume..

Standard Quartz Hangdown Wire Link Kit. Includes 10 links..

PerkinElmer Series 200 Pump Injector Bracket. SERIES 200 PUMP INJECTOR BRACKET.\n\n.

Power Spacer. .

Nebulizer Assembly, Platinum/Rhodium for PerkinElmer Models Aanalyst 100/300/700/800, 5100(PC), 5000, 3300, 3110, 3100, Include a platinum alloy needle assembly and a tantalum venturi, Stainless Steel body

Purge Extension. .

Three 2-inch pieces of Perkalloy wire. Magnetic transition temperature of 596-C for TGS-2.

One-Way Valve for FIAS-200. Can be used with AmAmalgamation systems and FIAS-200..

Well Plate Reader Accessory.

Bead Assembly for NPD Detector, Pkg 5. .

Nichrome Hangdown Wire Kit, Includes six straight wires.

Nebulizer Cleaning Wires. Pkg 5. .

Universal Demountable and Semi-Demountable Cell Mount, Includes Top and Back Plates.

Belz. Rear Mirror 240. .

Pan, Stainless Steel, with Covers and O-Ring, 300 degree C, Any application requiring the heating beyond 200 degree C or where gaseous decomposition products may be generated should first be tested outside of the instrument

Encapsulated Kit. Includes Indium and Zinc.

Jet Assembly. for for NPD Detector.

Sapphire, 2.0 mm i.d..

Model 8125 Low-Dispersion Stainless Steel Injection Valve.

Rheodyne 7725 Injection Valve for Series 200 Autosampler.

Nebulizer, High Sensitivity with Pt/lr Capillary Assembly, Inert plastic body with red adjusting ring, for PerkinElmer Analyst 100/300/700/800, 5100 PC, 5000, 3300, 3110, 3100, and Atomic absorption spectroscopy

High Pressure Capsule Sealing Tool, For sealing high pressure capsule.

Disk. Trap Packing Disk, Glass fiber disk for separating sorbents when packing ATD cold trap with multiple sorbent

GemTip Tip Kit for ICP Crossflow Neb.

Nebulizer. GemTip Crossflow Nebulizer, Contains a PPS (carbon-filled polyphenyl sulfide) end cap with a GemTip clear sapphire sample tip and red ruby argon tip

Deactivated Liner (4 mm, packed with wool). for Split Operation.

Deactivated Liner (2 mm, packed with wool). for Splitless Operation.

Flowcell-10mm Stainless Stl Lvl2. .

Filter Cartridge for Fume Extraction Separator Trap, Pkg. 50. .

Front ferrule for 2.4mm Outer Diameter Tubing (P/N B0017998). .

Back ferrule for 2.4mm Outer Diameter Tubing (P/N B0017998). .

Eluo Nebulizer Cleaner.

Low-Flow GemCone Nebulizer.

Liner. Cyclo Splitter Split Liner, 4mm I.D x 6.2mm O.D x 92.1mm length, with cylindrical glass spiral in the sample pathway, providing a large area for sample vaporization

DSC 7 Rse Alum Covers W/0.05mm Holes. For use with (B0169319, B0169320, and B0169321)..

Nickel Skimmer Cone. .

Nickel Sampler Cone. .

Platinum Skimmer Cone. .

Platinum Sampler Cone. .

Cleaning Tips Pk/10. .

Quartz Cyclonic Spray Chamber for ELAN DRC. Replacement quartz spray chamber with ball joint..

Water Sample, Sealed, 10 mm cell contains high-purity water, to measure signal-to-noise using the Raman band of water

Cell Spacer 1mm. .

Semi-micro cell. Semi-micro Quartz SUPRASIL with PTFE Lid. Specifications: Light Path: 10 mm x 4 mm Outside Dimension: 45 mm x 12.5 mm x 12.5 mm Inside Width: 4 mm Base Thickness: 1.25 mm Cell Volume: 1.4 mL Windows: 4

10 mm pathlength, PTFE lid, Quartz SUPRASIL, black version, 1.4 mL cell volume. Set of 2..

100 mm pathlength, PTFE lid, Quartz SUPRASIL, 35.0 mL cell volume..

Rectangular Sodium Chloride Sealed Cell, Pathlength: 1.0mm.

Rectangular Sodium Chloride Sealed Cell, Pathlength: 0.1mm.

5 mm pathlength, PTFE lid, Quartz SUPRASIL, 1.75 mL cell volume. Set of 2..

10 mm pathlength, PTFE lid, NIR Quartz SUPRASIL 300, 3.5 mL cell volume. Set of 2..

Potassium Bromide Semi-Demountable Cell Kit (Preassembled), Pathlength: 0.1mm.

Cell. Rectangular Calcium Fluoride Sealed Cell, Pathlength: 0.2mm, CaF2 is extremely hard and stable, While resistant to most acids and bases, CaF2 should not be used with ammonium salts.

Spectroscopy Cell, Macro with PTFE Stopper, Quartz SUPRASIL, Light Path: 1mm, Outside Dimension: 52H x 12.5W x 3.5D mm, Inside Width: 9.5mm, Base Thickness: 1.5mm, Cell, Volume: 350 mL, contain two clear windows

Cup Splitter Split Liner 4mm. Cup Splitter Split Liner 4mm; 4mm I.D x 6.2mm O.D x 92.1mm length.

Adjustable Pellet Holder Adapter. Required but not included with Potassium Bromide Die (51001144) or Quick Press (1860436)..

Accessory Kit-GC O-Rings 013 Viton Pk/5. .

FEP Tubing, 1.0 mm i.d. , Pkg.5. .

Regulator, High-Purity Brass (Single Stage), CGA-590, Use: Air, All regulators are supplied with standard CGA fittings, with outlet shutoff valve and terminate 1/4 in

DMA/TMA 7 Sample Thermocouple. .

Purge Extension Window. Axial view Purge Extension Window, Replaceable quartz window that slides into the purge extension between the torch and the optics

TUBE ASSY-NGO DV RADIAL WINDOW.

International Customer re-certification kit, for reference materials, should have recalibrated at periodic intervals, with Certificate of Calibration

Window. Purge Extension Window for Optima 3000 and Plasma 1000/2000, Replaceable quartz window that slides into the purge extension between the torch and the optics.

Quartz SUPRASIL Macro/Semi-micro Cell. Specifications: \n-Light Path: 4 mm x 4 mm \n-Outside Dimension: 45 mm x 12.5 mm x 12.5 mm \n-Inside Width: 4 mm \n-Base Thickness: 4.5 mm \n-Cell Volume: 500-L \n-Windows: 4 Requires stirrer fleas (Part # 04978499)..

Flow-Through Cell. Spectroscopy Flow-Through Cell, Semi-Micro/Ultra-Micro with In- and Outlet Tubes, Quartz SUPRASIL, Light Path: 10mm, with two clear windows, two screw connectors, M6 x1 and 500 mm length FEP tubing - 1.9 mm o.d., 1.1 mm i.d

Flow-Through Cell. Spectroscopy Flow-Through Cell, Semi-Micro/Ultra-Micro with In- and Outlet Tubes, Quartz SUPRASIL, Light Path: 10mm, with 2 Screw Connectors, 160 uL cell volume

Reference Mirror, Disposable for Reflectance Spectroscopy, Secondary standard for specular reflectance calibration according to GLP regulations, not recalibrated

HGA Pyrocoated Graphite Tubes, Pkg 20.

THGA Graphite Tubes with End Cap, Pkg 5.

Std THGA Graphite Tubes - 5 pack.

Standard THGA Graphite Tubes with Integrated Platform, Pkg 20.

THGA Graphite Contact Cylinder, 1 Pair. .

Standard Pyrex Furnace Tube. .

System 2 EDL Driver. for PerkinElmer Aanalyst 600/700/800, SIMAA 6000 and 4110 ZL. Short Cable

Universal Coded Intensitron Lamp Plug Adapter. for PerkinElmer AAnalyst Instruments. Allows coded lamps (N06612XX series) to be used with AAnalyst instruments; however, an AAnalyst spectrometer does not recognize their coding.

Lumina Lamp Plug Adapter. for PerkinElmer Atomic Absorption Instruments with Non-coded Lamp Connectors. Allows Lumina HCLs (N305XXXX series) to be used with PerkinElmer atomic absorption instruments with non-coded lamp connectors.

Copper (Cu) Coded Hollow Cathode LuminaLamp Adapter. This adapter allows Lumina HCLs to be used on PerkinElmer's wide range of atomic absorption spectrometers.

Vanadium (V) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Titanium (Ti) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Tellurium (Te) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Xenon Source.

Tin (Sn) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Silicon (Si) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Selenium (Se) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Antimony (Sb) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Rhodium (Rh) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Platinum (Pt) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Palladium (Pd) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Nickel (Ni) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Sodium (Na) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Lithium (Li) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Deuterium Lamp. for PerkinElmer LC-90 and LC-290 Detectors.

Deuterium Lamp Phase 2. for LC Series 200 Diode Array Detector.

Multi-Element K-Na Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Indium (In) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Gallium (Ga) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Thallium (Tl) Electrodeless Discharge Lamp. EDL lamps are compatible with all PerkinElmer AA Spectrometers except Models 103,107,290,290b and 820.

Selenium (Se) Electrodeless Discharge Lamp. EDL lamps are compatible with all PerkinElmer AA Spectrometers except Models 103,107,290,290b and 820.

Antimony (Sb) Electrodeless Discharge Lamp. EDL lamps are compatible with all PerkinElmer AA Spectrometers except Models 103,107,290,290b and 820.

Mercury (Hg) Electrodeless Discharge Lamp. EDL lamps are compatible with all PerkinElmer AA Spectrometers except Models 103,107,290,290b and 820.

Cadmium (Cd) Electrodeless Discharge Lamp. EDL lamps are compatible with all PerkinElmer AA Spectrometers except Models 103,107,290,290b and 820.

Arsenic (As) Electrodeless Discharge Lamp. .

Deuterium Lamp Assembly For Flexar Hplc Uv/Vis Detector.

Multi-Element Cu-Fe-Ni Lumina Hollow Cathode Lamp, Diameter: 50mm (2in.).

Multi-Element Cu-Fe-Mn-Zn Lumina Hollow Cathode Lamp, Diameter: 50mm (2in.).

Multi-Element Co-Cu-Fe-Mn-Mo Lumina Hollow Cathode Lamp. , Diameter: 50mm (2in.)

Multi-Element, Ag-Cr-Cu-Fe-Ni Lumina Hollow Cathode Lamp.

Cobalt (Co) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Multi-Element Ca-Zn Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Multi-Element Ca-Mg-Zn Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Multi-Element Ca-Mg Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Calcium (Ca) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Bismuth (Bi) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Barium (Ba) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Gold (Au) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Arsenic (As) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Multi-Element Al-Ca-Mg Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Multi-Element Al-Ca-Cu-Fe-Mg-Si-Zn Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Aluminum (Al) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Multi-Element Ag-Cr-Cu-Fe-Ni Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Multi-Element Ag-Au Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Silver (Ag) Lumina Hollow Cathode Lamp. Diameter: 50mm (2in.)

Barium (Ba) Lumina Hollow Cathode Lamp. with Intensitron Cable Diameter: 50mm (2in.)

Mercury Lamp. for PerkinElmer Flow Injection Mercury System (FIMS).

Series 200a Refractive Index Tungsten Detector Lamp. TUNGSTEN LAMP, SERIES 200 RI DETECTOR. \n\n.

Tungsten Lamp Assembly For Flexar Hplc Uv/Vis Detector.

Tungsten Diode Array Detector Lamp. for LC Series 200.

Selenium (Se) AAnalyst Coded Intensitron Adapter. allows Intensitron HCLs to be used on PerkinElmer's wide range of atomic absorption spectrometers.

Lead (Pb) AAnalyst Coded Intensitron Adapter.

Arsenic (As) AAnalyst Coded Intensitron Adapter.

Small DMA/TMA 7 Replacement Furnace. High temperature 15 mm inside diameter (to 1000-C)..

FILTER-ESTHER 4.5 COATED SS DISK. .

Mixing Manifold.

Air Filter for Amalgamation System. .

PEEK and Ceramic Stator Face Assembly for Rheodyne Injection Valves, Model 9725 and 7725.

Quick Press, Includes 7mm die set and collar. The quick press consists of a handpress, a 7mm die set, and a metal collar. Micropellets can be prepared in the quick press by purchasing the optional 3mm or 1mm die. The KBr pellet is formed in a metal collar that fits into an adjustable pellet holder..

Stylus-Clarus 500 GC Touchscreen (Pk/5).

Rinsing Kit for PerkinElmer AS-93 plus Autosampler.

Probe. FIAS Sampling Probe Assembly for AS-90/90A/90 Plus/91/93 Plus Autosampler, 0.6mm Inner Diameter. Consists of stainless steel sampling probe and screw fitting, and FIAS capillary tubing assembly

Replacement Vial Locator for PerkinElmer AutoSystem GC Autosampler. .

Probe. Flame Sampling Probe Assembly for PerkinElmer AS-90/90A/90 Plus/91/93 Plus/S10 Autosampler, 0.6mm Inner Diameter, Consists of stainless steel sampling probe and screw fitting, and flame capillary tubing assembly,

Probe. FIAS Sampling Probe Assembly 1.0mm Inner Diameter, Consists of stainless steel sampling probe and screw fitting, and FIAS capillary tubing assembly 4, for AS-90/90A/90 Plus/91/93 Plus Autosampler,

Head Assembly. Collector Head Assembly for Auto-Ignite Flame Ionization Detector (FID) for AutoSystem XL Gas chromatography

New sampling probe for PerkinElmer AS-90/90A/90 Plus/91/93 Plus Autosampler.

BENCH OPTIMA F/2X00 SRS DV - N0773106

Test Kit-Caffeine. .

Filter Charcoal. .

TurboMatrix Thermal Desorber Trap, Empty. .

TurboMatrix Thermal Desorber Trap, Packed with Tenax. Trap packed with Tenax..

Hg Replacement Filter. .

GC Nozzle Filter Discs Pk/10.. .

Cold Trap Tube, Low Flow, Unpacked for ATD 400, with reduced bore at one end. Allows minimum gas flow during trap desorption

Replacement Acetylene Filter Cartridge. .

Air Monitoring Trap. TurboMatrix Air Monitoring Trap, packed with carboneous sorbents suitable for ozone precursor and air toxics monitoring.

In-Line Filter Trap.

In-Line Filter Trap Refill Kit. Sufficient for two refills..

10-m Titanium Solvent Reservoir Sparger.

Titanium In-Line Solvent Filter System for Biocompatible Pumps. .

Filter-ICP. .

Piston. High Pressure Piston, are made of sapphire for the highest quality hardness and surface. For PerkinElmer Series 4, Integral 4000, 200, 400, 410, Model 250 and 620 Pumps

Low Press Stet Piston 250 Pump. .

Adhesive Film Mount, easy-to-use, economical cardboard mounts permanently hold polymer films or other thin sample

Jet Replacement Tool for Auto-Ignite FID for AutoSystem Series gas chromatography. 1/4in nut driver for removing jet from auto-ignite FID body

Large Tin Capsule Kit, Pkg.250.

Pan. Sample Pan, Aluminum with Cover, Used with nonvolatile solid samples, such as platics and polymers. Operating range of -170 degree to 600 degree C, a volume (uL) 40 and an ambient max pressure, Pans are crimped, not hermetically sealed

Vial Receptacle. .

1/8in Brass Swagelok Nut, Pkg 5. .

Graphite Ferrule, for cold trap, for applications except mass spectrometry or ECD.

Cold Trap Nut for ATD, Pkg 1. Two required per trap tube..

Brass Male Connector, Size: 1/8in to 1/4in NPT. .

Copper Torch Ignitor Tape for Optima 2x00/4x00/5x00/7x00, Includes 120 squares.

GemTip Replacement, Cross-Flow II Nebulizer for ICP-MS, Includes a color coded set of ruby and sapphire GemTips optimized, Orifice size: argon, (0.23mm, 0.009in) ruby red; sample, (0.34mm, 0.013in) clear

Stainless Steel Replacement Needle, Jet. .

Trap Packing Retaining Spring, Pkg 5. For low flow trap..

Adapter for 1/4 in Packed Column, injector outlet (inside oven).

1/4in Stainless Steel Swagelok Nut, Pkg 5. .

1mL Stainless Steel Sample Loop for Model 7725 Rheodyne Injectors.

Stainless Steel Empty Sample Tubes, Capped, Pkg 10. .

Gold-Plated Stainless Steel High Pressure Capsules.

Silanized Glass Wool (50g). .

Impact Bead. .

2L Glass Bottle for Vacuum Degassing System. Not for use with Helium Degassing.

Tube Sample, Quartz, for high-temperature furnace, for the expansion, penetration, compression and flexure modes of operation, Used with high temperature furnace, part of Quartz Parallel Plate System Kit

Quartz Torch for Optima 2000/4000, Demountable, No Slot. Recommended for organic solvents..

Glass Liner for Packed Column Injector. .

Quartz Torch for Optima 3000 XL. .

Quartz Torch for Quick Change Torch Module for Optima 3000 and 3000 SCR. .

Quartz Liner for Packed Column Injector. .

Bonnet, Quartz, for Optima 3X00 Series Radial.

Radial Purge Extension Quartz Window, Optima 3000 DV (long tube). .

Window. Radial Purge Extension Quartz Window, Optima 2x00/3000/7000 DV/8000 (short tube), Replaceable quartz window that slides into the purge extension between the torch and the optics.

Demountable Quartz Torch for all ELANs. .

Reduction Tube for CHN Analysis, Quartz.

Combustion Tube for CHN Analysis, Quartz.

Nebulizer Concentric Quartz, MEINHARD Type A3, reflects exacting standards, self-aligning aerosol, and close fabrication control

Nebulizer Concentric Glass, MEINHARD Type A, include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control, Close fabrication control

Nebulizer Concentric Glass, MEINHARD Type C, include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control, Close fabrication control, For use with high dissolved solids solution

Quartz Injector for Optima 3000 XL/DV, 0.8mm i.d.. .

Cell Quartz 2 for FI-MHS, used in electrically-heated cell assembly or an air-acetylene flame with suitable mount

Cell Ultra-Micro QS 10mm. 10 mm pathlength, PTFE lid, Quartz SUPRASIL. Chamber volume 30 uL. Fill volume 15 uL.

Macro Cell. Macro cell Quartz SUPRASIL with PTFE Stopper. Specifications: Light Path: 10 mm x 10 mm Outside Dimension: 46 mm x 12.5 mm x 12.5 mm Inside Width: 10 mm Base Thickness: 1.25 mm Cell Volume: 3.5 mL Windows: 4

50 mm pathlength, PTFE lid, Quartz SUPRASIL, 17.5 mL cell volume..

Macro Cell. Macro cell, Quartz SUPRASIL with PTFE Lid. Specifications: Light Path: 10 mm x 10 mm Outside Dimension: 45 mm x 12.5 mm x 12.5 mm Inside Width: 10 mm Base Thickness: 1.25 mm Cell Volume: 3.5 mL Windows: 4

Liner, 4mm Quartz, for Split Operation or Large Volume Splitless Injection.

Quartz Torch, Demountable, Triple Slot. Standard torch for oil analysis..

Glass Liner (4 mm) for Split Operation. .

2mm Quartz Liner for Splitless Operation. .

Liner, Split Mode Quartz, 2mm, for Progmed-Temperature Split/Splitless Inlet System.

2500-L Sampling Syringe Kit for LC Autosampler.

Liner, Splitless Mode Quartz, 1mm, for Progmed-Temperature Split/Splitless Inlet System.

Impact Bead for High Sensitivity Nebulizer with Pt/lr or Tantalum Capillary, for PerkinElmer Analyst 100/300/700/800, 5100 PC, 5000, 3300, 3110, 3100 4100, 2100, 1100(B), Atomic absorption spectroscopy, Inert plastic body with red adjusting ring

Injector-4300V 1.2mm Alumina. .

Alumina, 2.0 mm i.d.. .

Alumina, 1.2 mm i.d.. .

Alumina, 0.80 mm i.d.. .

Injector Alumina for Optima 3000 XL/DV, 2.0 mm i.d. Standard injector corrosion-resistant to all mineral acids including HF and aqua regia.

Injector. Alumina Injector Optima 3X00 Series Radial (SCR), Plasma 400, Plasma, 2.0 mm i.d, standard configuration, with complete corrosion resistance to all acids for used with less volatile organic solvents

HGA Pyrocoated Graphite Tubes with Integrated Platforms, Pkg 20.

HGA Pyrocoated Graphite Tubes with Integrated Platforms, Pkg 5.

HGA Lvov Graphite Platforms, Pkg 20.

Replacement O-Rings for PerkinElmer HS 40XL/HS40/HS-100/HS-101 Needle Seal Assembly, Pkg 10. .

HGA Pyrocoated Lvov Graphite Tubes, Pkg 20.

ATD400 Ferrules Vespel Pk/5. .

Ferrule, PTFE, cold trap, for Mass spectrometry or ECD.

GC Graphite Ferrules Pk/5. .

Three 2-inch pieces of 99.99% nickel wire, Magnetic transition temperature of 355.3- C for TGS-2.

Insertion Tool for PerkinElmer Series 4, Integral 4000, Models 250 and 620 Pump.

MIR Polystyrene Reference Card. 0.038 mm, mounted..

Replacement Iris for DSC 7 (Eight required). .

O-Ring for Furnace Window. .

O-Ring, for High Sensitivity Nebulizer Body, Atomic absorption Spectrometer, Orgainic Resistant.

O-Ring for Capillary Assembly, High Sensitivity Nebulizers, AA Spectrometers.

Small O-Ring for MEINHARD Nebulizers. .

Cup sample, 2.5mL Polypropylene Disposable, Heavy-duty construction prevents cracking or tipping, Translucent, for Graphite Furnace Autosampler

PTFE Membrane, Pkg. 50. For use with the P/N B0507959 gas/liquid separator..

O-Ring. Viton O-Ring for Glass Liners, Maximum injector temperature 250 degree C. for use with Mass spectrometry

Skimmer Cone O-Rings, Pkg. 5. .

Sampler Cone O-Rings, Pkg. 5. .

O-Ring Kit for Optima 3000 XL/DV Torch.

Torch O-Ring Kit for ELAN 6000/5000, Pkg. 4. Includes four O-Rings for injector support/ torch base..

O-Ring Kit for Optima 3000 Torch, Pkg 5. Includes 5 O-Rings..

Kelrez O-Ring for Glass Liners, Pkg 1. Maximum injector temperature 350-C..

High Temp ( 200 -C), KALREZ 011, Large Seal O-Ring, Pkg. 1. .

High Temp ( 200 -C), KALREZ 009, Small Seal O-Ring, Pkg. 1. .

Knurled Nut. .

High Pressure Piston Seal Replacement Kit. Includes: 4 seals, back-up rings and O-Rings..

Filter Air Pump Side ELAN 6000. .

Consumable Kit-GC O-Rings .009 Pk/5.. .

ADAPTER-JAZ INJECTOR.

PEEK Rotor Seal for Rheodyne Injection Valves, Model 7125,7725 and 9725.

Tefzel Rotor Seal for Rheodyne Injection Valves, Model 7725, 9725 and 7125.

Cap. TurboMatrix Analytical Cap, Required for use on the TurboMatrix instrument during analysis (use with brass long-term storage caps)

Adapter M, 1/4in (6.4 mm) External Screw Thread, 0.7mm Outer Diameter Pt/Ir Capillary Nipple for FIAS-100, FIAS-400, and FIAS-400MS.

Adapter L, 1/4in (6.4 mm) External Screw Thread, 2.8mm Outer Diameter Nipple for FIAS-100, FIAS-400, FIAS-400MS and FIMS.

Adapter K, 1/4in (6.4 mm) External Screw Thread, 1.8mm Outer Diameter Nipple for FIAS-100, FIAS-400, FIAS-400MS and FIMS. Adapter K, 1/4in (6.4 mm) External Screw Thread, 1.8mm Outer Diameter Nipple for FIAS-100, FIAS-400, FIAS-400MS and FIMS

Connector IIIA T-piece with Nipples for 1.5mm To 2.5mm Inner Diameter Tubes for FIAS-100, FIAS-400, FIAS-400MS and FIAS-200

Connector IA with Nipples for 1.7mm to 3.2mm Inner Diameter Tubes for FIAS-100, FIAS-400, FIAS-400MS, FIAS-200 and FIMS

Connector II with 1/4in (6.4mm) Internal Screw Thread for FIAS-100, FIAS-400, FIAS-400MS, FIAS-200.

Adapter A, 1/4in (6.4 mm) Internal Screw Thread, 1.8mm Outer Diameter Nipple, for FIAS-100, FIAS-400, FIAS-400MS, FIAS-200 and Flow Injection Mercury

Tubing Assembly PTFE, Inner Diameter 1.0mm, Length: 700mm, Color (screw fittings): Blue. Carrier or reagent container to peristaltic pump tubing, 1mm i.d. (700mm x 1 flanged end), for AA, ICP-OES, ICP-MS, FIAS-200 and FIMS

Tubing Assembly PTFE, Inner Diameter 1.0mm, Length: 300mm, Color (screw fittings): Blue, for AA, ICP-OES, ICP-MS, FIAS-200 and FIMS

Tubing Assembly PTFE, Inner Diameter 1.0mm, Length: 110mm, Color (screw fittings): Blue. Manifold to manifold and to tubing adapter C, 1mm i.d. (110mm x 2 flanged ends), for AA, ICP-OES, ICP-MS, FIAS-200 and FIMS

Tubing Assembly PTFE Inner Diameter 1.0mm, Length: 1000mm, Color (screw fittings): Blue. No further information is available for this product, for AA, ICP-OES, ICP-MS, FIAS-200 and FIMS

Tubing. Flame capillary Tubing assembly for PerkinElmer AS-90/90A/90 Plus/91/93 Plus Autosampler, Length: 1m, Inner Diameter: 0.6mm, One Fitting

Tubing assembly. FIAS capillary Tubing assembly for AS-90/90A/90 Plus/91/93 Plus Autosampler, Length: 1m, Inner Diameter: 0.6mm, Two Fittings

Tubing. Peristaltic Pump Tubing, Thickness: 0.84mm, Inner Diameter: 2.06mm, Color violet/violet, Tygon Tubing for Peristaltic Pump (Purple/Purple), for AA, ICP-OES, ICP-MS and FIAS-200

AS-93 Plus Rinsing Kit Pump Tube G 1.14 mm i.d., pkg. 6. .

Peristaltic Pump Tubing kit. Peristaltic Pump Tubing Kit, PVC, Red/Red i.d. 1.14mm 0.045in for 2mL/minimum, flow rate, Used to pump out the waste solution from the spray chamber. Kit includes PTFE TUBING.031 X.016 PER 1FT/0.3M

Pump Tube for AS-93 Plus Rinsing Kit, Inner Diameter: 2.79mm, Pkg. 6. .

Tubing Assembly PTFE, Inner Diameter 0.35mm, Length: 60mm, Color (screw fittings): White. Valve to preconcentration column 0.35mm i.d. (60mm x 2 flanged ends), for AA, ICP-OES, ICP-MS, FIAS-200 and FIMS

PVC Pump Tubing, Black/White ID: 3.18mm, Pkg. 12. Peristaltic pump tubing with inside diameter of 3.16mm. Part of P/N N8120101 Drain Tubing Kit..

Tubing. Peristaltic Pump Tubing, Thickness: 0.84mm, Inner Diameter: 0.76mm, Color black/black, Peristaltic pump tubing has a wall thickness of 0.84mm unless noted otherwise. For AA, ICP-OES, ICP-MS and FIAS-200

PEEK Tubing, Outer Diameter: 1/16in, Inner Diameter: 0.007in, 5ft.

PVC Pump Tubing Orange/Red 0.19MM ID pkg.12. .

BLACK TYGON TUBING 1FT/0.35M.

Inlet Tube, 0.7 mm i.d.. .

Disposable Desiccant - Replacement part for the Spectrum RX I System. Two are required for each desiccant change..

Solution-Methanol Blank. .

Solution-E6100DRC Setup/Stab/Masscal. .

Solution-E6100DRC Sensitivity/Det Limit. .

Solution-E6100 DRC Wash. .

Solution-Cr Standard In Methanol. .

Copper Plus, 454 g, for PerkinElmer Organic Elemental Analyzer.

EA-1000, 50 g, PerkinElmer Organic Elemental Analyzer.

Copper Oxide - Wire Form, 454 g, for PerkinElmer Organic Elemental Analyzer.

Copper for Nitrogen, 454 g, for PerkinElmer Organic Elemental Analyzer.

Silver Tungstate/Magnesium Oxide, 100 g, for PerkinElmer Organic Elemental Analyzer.

Leybold Roughing Pump Oil. One gallon of oil for the Leybold Roughing Pump.

Varian Roughing Pump Oil. One gallon of oil for the Varian Roughing Pump.

Coolant Fluid chiller for ELAN, 1 liter bottle, for ELAN 9000/6X00/DRC series instruments also for organics chillers

EA-1000, 50 g, PerkinElmer Organic Elemental Analyzer.

Thermocouple Assembly. .

Holder Cover. Vented Platinum Sample Holder Cover, Each cover has two vent holes for Pyris 1 DSC, DSC 7, DSC-4, and DSC-2 sample holder

Holder Cover. Vented Platinum Sample Holder Cover, Each cover has two vent holes for Pyris 1 DSC, DSC 7, DSC-4, and DSC-2 sample holder

Flexible PTFE Tubing. For High Temperature Furnace Exhaust Line..

Platinum Stirrup Kit. Includes four stirrups..

Quick Press Spacer Die. Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021)..

Quick Press. Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021)..

Flowcell Assembly, 3mm x 1.7-L , for Series 200/785A and ABI 759A UV/VIS Detector, Prep. .

Platinum Sample Pan Kit. Includes four pans..

O-RING .674ID .103WD.

O-Ring Thermal Desorber Trap, 0.301ID, 0.070WD. O-Ring 0.301ID, 0.070WD.

O-Ring Thermal Desorber Trap, O-Ring 0.208ID, 0.070WD. O-Ring 0.208ID, 0.070WD.

O-Ring Thermal Desorber Trap, 0.145ID, 0.070WD. O-Ring 0.145ID, 0.070WD.

Spare NaCl Window for Short Path Demountable Gas Cells, Pkg 2.

Pan, Stainless Steel, with Covers and O-Ring, 300 degree C, Any application requiring the heating beyond 200 degree C or where gaseous decomposition products may be generated should first be tested outside of the instrument

Front Surface(LS series). Front Surface (LS series) Accessory for holding films, blocks, powders and turbid samples. Includes two holders with synthetic fused silica windows, Position externally adjustable for optmizing sensetivity

Lin TV LIN Freq Chart Paper (1 roll). .

Reference Material. Iron Reference Material, Three 2-inch pieces of 99.99% Iron wire. Magnetic transition temperature of 780 degree C.

Reference Material. Indium Calibration Reference Material, Transition Point: 156.60 degree C, reference materials are 99.999% pure. DSC requires elements of this purity so that the instrument can be accurately calibrated.

Fluorescence standards.

Cell Holder, Rectangular Long Path, accepts cells with pathlengths from 10 to 100 mm, easy to install and has the same footprint as the Standard Cell Holder

Antistatic Compound, Liquid. Apply to the outside of the glassware to reduce static electricity..

Potassium Bromide Die. Evacuable Potassium Bromide Die, 13 MM, includes plunger, set of upper and lower anvils, set of O-rings, and Perspex Extractor ring, Replacement Parts and Pellet Spares for Paragon, spectrum GX.

Flowcell. Analytical Flowcell LC Standard for use with Series 200/785A and ABI 759A UV/Vis Detectors, 8mm x 12uL

Graphite Tube Alignment Tools for Non-Zeeman Furnaces. .

Multi-use Quartz Window.

Optima 3000 XL, Window. .

HGA Pyrocoated Graphite Tubes, Pkg 5.

HGA Pyrocoated Graphite Tubes, Pkg 10.

HGA Contact Cylinders for Zeeman Graphite Furnaces. 1 Set. Includes LH Contact, RH Contact..

Lamp. Festoon Lamp, 12 Volts, 3 Watts, for Luminescence Spectrometers are pulsed Xenon discharge lamps (7.3 W average power at 50 Hz)

PTFE Plugs, Pkg 6. .

Pluggable Female Coupling. Fits all Polarimeters (Models 141, 241, 241MC, 243, 341 and 343..

Sampling Capillary for PerkinElmer AS-60, AS-70, AS-71, AS-72 and AS-800 Graphite Furnace Autosampler, for Solvent and acid-resistant sampling components. PTFE pipette tips and capillaries for reduced contamination. Easy replacement.

Air Filter for the Fan of the Main Power Supply. Air filter is for the fan of the main power supply..

Air Filter for Main Power Supply. .

In-Line Solvent Filter System. for Stainless Steel pumps.

Filter Cartridge for Spectrometer Water Filter. for water filter P/N 09904845.

Solvent Filter. for FT-NIR.

High Pressure Seal and Backup Ring. for Series 200 Micropump.

Low Pressure Piston Seal. for Series 200 Micropump.

Low Pressure Piston Seal.

High Pressure Piston Seal. Chemically resistant (New).

Standard High Pressure Piston Seal (Gold).

Forceps, hooked, Non-Magnetic, Nonserrated Stainless Steel Straight, for 2400 CHN/O Analyzer.

Forceps, Flat, Non-Magnetic, Nonserrated Stainless Steel Straight, for 2400 CHN/O Analyzer.

Reference Material. Tin Calibration Reference Material, Transition Point: 231.88 degree C, 99.999% pure, DSC requires elements of this purity so that the instrument can be accurately calibrated

Autosampler Aluminum Sample Pans (covers not included), 50-L, 0.1mm, Sealed, Pkg.400.

Pan. Autosampler Aluminum Sample Pan (covers not included), 40uL, 0.15mm, Sealed, used to prepare sample materials for your DSC Autosampler, Pans are available in sealed or vented version, used for non-robotic systems

Autosampler Aluminum Sample Covers (pans not included), 0.1mm, Pkg.400.

Union. Swagelok Zero-Dead-Volume Union, provides stainless steel, titanium and polymer based nuts, ferrules, unions and tubing for plumbing the components of Liquid chromatography system.

Brass Male Compression Fitting, 1/8 NPT, 1/4 in. Tubing. .

Nut 1/8 Tube O.D.. .

Ferrule. Graphite/Vespel Ferrule, 1/16in Nut Size, 0.18-0.25 mm column i.d., 0.4 mm (2 hole) Ferrule i.d., for use with GC/MS systems, for for glass columns and polyimide-coated, fusedsilica capillary columns. Temperature limit is 350 degree C

Capillary Column Graphite Ferrules, 1/8in Nut Size, 0.32mm column i.d., 0.5mm Ferrule i.d., Pkg 10.

Graphite Ferrules, 1/4in Nut Size, 1/4in Ferrule i.d., Pkg 10.

Capillary Column Graphite Ferrules, 1/8in Nut Size, 0.32mm column i.d, 0.5mm (2-hole) Ferrule i.d.

Capillary Column Graphite Ferrules, 1/8in Nut Size, 0.53mm column i.d., 1.0mm Ferrule i.d., Pkg 10.

Reference Material. Alumel Reference Material, Magnetic transition temperature of 154.2 degree C, Three 2-inch pieces of alumel wire

1/8in Graphite/Vespel Ferrule, Pkg 10. .

Standard High Pressure Piston Seal (Gold), Biocompatible Titanium. .

Container Reagent, 30mL Polypropylene Cloverleaf-Shaped, Resists most acid solution for AS-60, AS-70, AS-71 and AS-72 Graphite Furnace Autosampler

Radial Window O-Ring. .

O-Ring, 25 mm Silicone.

O-Ring for Ball Joint. 1-7/16 in. o.d. x 1/8 in. wide.

Viton O-Ring, 0.364in inner diameter, 0.070in width, For Silicone Application.

Silicone O-Ring (red) 0.364in. i.d., 0.070in. width. Included in O-Ring Kit P/N N0580539..

O-Ring. .

O-Ring, 0.239 in. i.d., 0.070 in. width. .

O-Ring, Large, two required, for DSC 7 Flow-Through Cover and DTA 1700 Furnace Tube.

O-Ring, Auto-Injector RAM for CHNS/O Elemental Analyzer with nut at the bottom end of the combustion and reduction tubes

O RING. .

O-Ring, 0.301 in. i.d., 0.070 in. width. Included in O-Ring Kit P/N N0580539..

Low Pressure Piston Backup Guide Bushing. .

End Cap O-Ring for Scott-type spray chamber. Requires Tip Kit P/N N0580624.

Graphite/Vespel Ferrule, 1/16in x 0.8 mm for transfer line 0.53 mm column, Pkg 10.

Graphite/Vespel Ferrule, 1/16in x 0.5 mm for transfer line 0.32 mm column, Pkg 10.

Graphite/Vespel Ferrules, 1/16in Nut Size, 1/16in Ferrule i.d., Pkg 10.

Ferrule 1/16 Tubing Tefzel. Requires Tip Kit P/N N0690676 for ICP-OES and P/N N8120515 for ICP-MS.

Vespel Rotor Seal for Rheodyne Injection Valves, Model 9725/7125/7725.

Waste Bottle. .

PEEK Nut, 0.125, TBG Flanged. .

PEEK Nut, 0.0625, TBG Flanged. .

PTFE Tubing, Inner Diameter 0.7mm, A.D. 1.60mm, Inner Diameter 0.7mm, A.D. 1.60mm.

PVC Peristaltic Pump Tubing, Black/Black 0.76mm i.d. Pkg 12. Inner diameter 0.030 in. (0.76 mm)..

Nebulizer Capillary Tubing, Clear, 0.023 i.d, 10 ft. (3 m.) length of polyethylene tubing 0.023 in. (0.6 mm) i.d. x 0.038 in. (0.97 mm) o.d, used with Cross-flow and High Solids Nebulizer

TYGON TUBING PER FT/0.3M.

TUBING 0.045ID SOLVENT FLEXIBLE PVC 12pk.

Adapter Tubing GemTip Nebulizer, Used to connect capillary tubing to Cross-flow nebulizers, and to larger inner diameter peristaltic pump tubing

Universal Test Mix for Reversed-Phase, 5mL. .

Solution-Optima Blank 2% Hn03. .

SmartTune Solution for DRC/DRCplus/DRC II. .

ELAN 6100 Setup/Stab/Masscal Solution. 10 ppb MG,CU,RH,CD, IN,BA,CE, PB,U/2% HNO3.

Solution-E6100 Det Limit. .

Standard. Multi-Element Standard Volume 2% HNO3 /per 500 mL, with 2% HNO3/500 mL 1 mg/L Barium, Magnesium, 10 mg/L of Lanthanum, Lithium, Manganese, Nickel, Strontium, Zinc 50 mg/L of Arsenic, Potassium

Porous Micron Filter. 10m - Erweka Style Case of 1000.

TUBE SS .04ID 1/16OD 25' 25FT. STainless Steel Tubing, 0.040 Inch I.D., 1/16 Inch O.D., 25'.

Generator H2 Carrier Gas 500Cc.

H2 Generator 250 Ml/Min 99.99.

Plunger P25F-Bt-Gt 25Ul Pkt1. Original Plunger Button Design

Nut-Tbg Fingertight. Requires Tip Kit P/N N0690676 For Icp-Oes And P/N N8120515 For Icp-Ms.

Nut-Tbg Fingertight Peek. Requires Tip Kit P/N N0690676 For Icp-Oes And P/N N8120515 For Icp-Ms.

Cassette Torch Mount For Elan Drc Ii. It is an innovative torch design, that is, fully modular, demountable, rugged, and easy to maintain. Now changing torch components is a simple process G no tools are required. Cassette Torch Mount does not include Demountable Quartz Torch o

UV Safety Sheild.

O-Ring 0.364Id 0.070Wd Ptfe Coated.

O-Ring 5/8 In Id X 1/8 In Wide Ptfe.

Torch Spacer.

O-Ring 0.239Id 0.070Wd Ptfe Coated.

Injector Spacer.

Injector Nut.

1/4 In B Ferrule Teflon.

Ferrule.

Cassette Torch Mount For Elan 9000/Drc-E. It is an innovative torch design, that is, fully modular, demountable, rugged, and easy to maintain. Now changing torch components is a simple process G no tools are required. Cassette Torch Mount does not include Demountable Quartz Tor

Torch Alignment Tool. Used To Align The Torch In The Load Coil.

Siltite Fingertite Ferrule 0.7Mm Pk10.

Siltite Fingertite Generic Starter Kit.

Siltite Fingertite Pe Inj / Ms Starter Kit.

Siltite Fingertite Perkin Elmer Inj / Fid Starter Kit.

Siltite Fingertite 0.8 Shimadzu 2010 Inj Starter Kit.

Siltite Fingertite Varian Inj/Ms Starter Kit.

Siltite Fingertite Varian Inj / Fid Starter Kit.

Siltite Fingertite Thermo Ms Starter Kit.

Siltite Fingertite Thermo Inj/Gc-Ms Isq Starter Kit.

Siltite Fingertite Thermo Inj/Det Starter Kit.

Siltite Fingertite Agilent Capillary/ Fid Starter Kit.

Siltite Fingertite 0.8 Agilent Inj Starter Kit.

Siltite Fingertite 0.8 Agilent Inj/Det Starter Kit.

Siltite Fingertite Starter Kit 0.5 - No Adaptors.

Siltite Fingertite Agilent Injector For P/N 0736100 Or P/N 0736105.

Siltite Fingertite Agilent Fid Detector For P/N 0736100 Or P/N 0736105.

Siltite Fingertite Agilent Ms Adaptor For P/N 0736100 Or P/N 0736105.

Siltite Fingertite Agilent Capillary.

Siltite Fingertite Starter Kit 0.4 - No Adaptors.

Siltite Micro Union Re-Order 0.7-0.7 Pk5.

Siltite Micro Union Re-Order 0.4-0.5 / 0.7 Pk5.

Siltite Micro Union Re-Order 0.4-0.5 / 0.4-0.5 Pk5.

Siltite Micro Union Replacement Ferrule 0.8-0.8 Pk10.

Siltite Micro Union Replacement Ferrule 0.5-0.8 Pk10.

Siltite Micro Union Replacement Ferrule 0.5-0.5 Pk10.

Siltite Micro Union Replacement Ferrule 0.4-0.8 Pk10.

Siltite Micro Union Replacement Ferrule 0.4-0.5 Pk10.

Siltite Micro Union Replacement Ferrule 0.4-0.4 Pk10.

Siltite Micro Union 0.8 To 0.8 Low Thermal Mass: 9 Mm In Length And Mass 0.5 G.

Siltite Micro Union 0.5 To 0.8 Low Thermal Mass: 9 Mm In Length And Mass 0.5 G.

Siltite Micro Union 0.5 To 0.5 Low Thermal Mass: 9 Mm In Length And Mass 0.5 G.

Siltite Micro Union 0.4 To 0.8 Low Thermal Mass: 9 Mm In Length And Mass 0.5 G.

Siltite Micro Union 0.4 To 0.5 Low Thermal Mass: 9 Mm In Length And Mass 0.5 G.

Siltite Micro Union 0.4 To 0.4. Low Thermal Mass: 9 Mm In Length And Mass 0.5 G.

High Purity Helium/Ar/N2 Reg.

Filter-Vapor Mist Nw25.

Liner-Thermo-Connectite-Bot-Hole-Pk-5.

Liner-Thermo-Connectite-Std-Pk5.

Liner-Sh2010-Connectite-Bot-Hole-Pk-5.

Liner-Sh2010-Connectite-Top-Hole-Pk-5.

Liner-Sh2010-Connectite-Std-Pk-5.

Liner-Ag-Connectite-Bot-Hole-Pk-5.

Liner-Ag-Connectite-Top-Hole-Pk-5.

Liner-Ag-Connectite-Std-Pk-5.

Silflow Fingertite Tool.

Silflow Ferrule For 0.53Mm Id Fst Tubing Pk 5.

Silflow Ferrule For 0.32Mm Id Fst Tubing Pk10.

Silflow Ferrule For 0.25Mm Id Fst Tubing Pk 10.

Silflow Ferrule For 1.07Mm Od Ss Tubing Pk 10.

Silflow Nuts Pk10.

Silflow 4 Port Wafer 0.25/0.32 Port.

Silflow 4 Port Wafer 0.53Mm Port.

Silflow 4 Port Wafer 1.1Mm Port.

Silflow 4 Port Splitter Kit 0.25/0.32 Port.

Silflow 4 Port Splitter Kit 0.53Mm Port.

Silflow 4 Port Splitter Kit 1.1Mm Port.

Silflow 3 Port Wafer 0.25/0.32 Port.

Silflow 3 Port Wafer 0.53Mm Port.

Silflow 3 Port Wafer 1.1Mm Port.

Silflow 3 Port Splitter Kit 0.25/0.32 Port.

Silflow 3 Port Splitter Kit 0.53Mm Port.

Silflow 3 Port Splitter Kit 1.1Mm Port.

Single Reflection Hatr Accy. For analysis of highly absorbing solid, semi-liquid and liquid samples. The sampling plate is a small round crystal for small sample volumes (5l and higher). Includes: znse crystal (7800-520 cm-1, compression clamp, volatiles cover and purge attachments)

Accessories for Spectrum Twoâ„¢ QA/QC Analysis Systems, PerkinElmer - 51000634, Demountable Gas Cells with Windows, NaCl, 10 cm Short-Path, for Spectrum Two

Accessories for Spectrum Twoâ„¢ QA/QC Analysis Systems, PerkinElmer - 51000636, Demountable Gas Cells with Windows, KBr, 10 cm Short-Path, for Spectrum Two

Fixed Angle Spec Refl Accy: 16.

96GWell GShallowG Adaptor For Use With Up To Two 96GWell Shallow Plates.

96GWell GDeepG Adaptor For Use With Up To Two 96GWell Deep Plates.

85GPosition Tray. (80) 2ml vials plus (5) 6ml reagent vials (for preGcolumn automated sample derivatization)

205GPosition Tray; (200) 0.2Ml MicroGVials Plus (5) 2Ml Calibration Vials.

100GPOSITION 2ML VIAL TRAY.

80GPOSITION TRAY W/ DILUTION.

Bio Conversion Kit For Flexar Lc Autosampler. This kit contains all of the parts necessary to convert autosampler to be biocompatible for bio applications

11720 FERRULES, Graphite, High Temperature. PK10 6.4MM GRAPHITE FERR.

11720 FERRULES, Graphite, High Temperature. PK10 3.2MM GRAPHITE FERR.

11720 FERRULES, Graphite, High Temperature. PK10 1.6MM GRAPHITE FERR.

11710 FERRULES, PTFE. PK6 #50 ACE-THRED, PTFE FERRULE DRILLED FOR 2OD TUBE.

11710 FERRULES, PTFE. PK6 #25 ACE-THRED, PTFE FERRULE DRILLED FOR 1OD TUBE.

11710 FERRULES, PTFE. PK6 #18 ACE-THRED, PTFE FERRULE DRILLED FOR 5/8OD TUBE.

11710 FERRULES, PTFE. PK12 #15 ACE-THRED, PTFE FERRULE DRILLED FOR 1/2OD TUBE.

11710 FERRULES, PTFE. PK6 #50 ACE-THRED, SOLID PTFE FERRULE.

11710 FERRULES, PTFE. PK6 #25 ACE-THRED, SOLID PTFE FERRULE.

11710 FERRULES, PTFE. PK6 #18 ACE-THRED, SOLID PTFE FERRULE.

11710 FERRULES, PTFE. PK 12 SIZE 11 PTFE FERRULE FOR USE WITH #11 ACE-THRED, FOR 9.5MM OD TUBE.

11710 FERRULES, PTFE. PK12 #15 ACE-THRED, SOLID PTFE FERRULE.

11710 FERRULES, PTFE. PK12 #11 ACE-THRED, SOLID PTFE FERRULE.

11710 FERRULES, PTFE. PK12 #7 ACE-THRED, SOLID PTFE FERRULE.

11710 FERRULES, PTFE. PK12 #7 ACE-THRED, PTFE FERRULE DRILLED FOR 1/8OD TUBE.

5029 BUSHING, Nylon or PTFE. #7 PTFE BUSHING, 7.5MM CENTER HOLE, (1) PTFE FERRULE FOR 1/4OD TUBES (11710-07).

5029 BUSHING, Nylon or PTFE. #7 PTFE BUSHING, 7.5MM CENTER HOLE, FERRULE DESIGN, FERRULE NOT INCLUDED.

5029 BUSHING, Nylon or PTFE. #7 PTFE BUSHING, SOLID, (2) FETFE O-RINGS.

5029 BUSHING, Nylon or PTFE. #7 PTFE BUSHING, 7.5MM CENTER HOLE, (2) FETFE O-RINGS.

5029 BUSHING, Nylon or PTFE. #7 PTFE BUSHING, 8MM CENTER HOLE, (2) FETFE O-RINGS.

5029 BUSHING, Nylon or PTFE. #7 NYLON BUSHING, 8MM CENTER HOLE, (2) FETFE O-RINGS.

5029 BUSHING, Nylon or PTFE. #7 LARGE HEAD NYLON BUSHING, CENTER HOLE FOR 1/4OD TUBING, (1) FETFE O-RING. USE WITH ANY #7 ACE-THRED FEMALE BUSHING, SEE 7482-33 #25 TO #7 BUSHING ADAPTER.

5029 BUSHING, Nylon or PTFE. #7 NYLON BUSHING, SOLID, (2) FETFE O-RINGS.

5029 BUSHING, Nylon or PTFE. #7 NYLON BUSHING, 7.5MM CENTER HOLE, FERRULE DESIGN, FERRULE NOT INCLUDED.

5029 BUSHING, Nylon or PTFE. #7 NYLON BUSHING, 7.5MM CENTER HOLE, (2) FETFE O-RINGS.

5029 BUSHING, Nylon or PTFE. #7 NYLON BUSHING, 7.5MM CENTER HOLE, NO O-RINGS.

Hose Assembly, 4ft. For use with CG-2025-10

Chromatography Column with Reservoir and Straight All-PTFE Stopcock Assembly CHROMAFLEX. Column Tip , Only for 17800, 17810 and 29050H, Qty. 6 KIMAX column with a 250 mL reservoir at the top of the column.

GC Inlet Liners, SGE. SGE Inlert Liners, GC, Trajan Scientific and Medical - 092218, Split/Splitless, with Single Taper, 78.5 mm (4 mm I.D.), Quartz Wool

CARTRIDG TRIARTC18 PREP120A 5UM10X10 PK2 - TA12S05-0110CC

CPG 7.1 TIDE QUENCHER 1000 A 100MG - 2117

CPG 7.1 TIDE QUENCHER 500 A 100MG - 2116

WRENCH INLET FOR LUCIDITY MINIGC - 29260

O-RING LINER NUT KALREZ FOR LUCIDITY PK5 - 29259

O-RING LINER KALREZ PK5 - 29258

MS NUT FOR SHIMADZU 2030 GC-MS PK2 - 27217

KIT CAPILLARY TOOL MAKE LIFE EASIER - 27216

POWER ADAPTOR 24 VDC 1 AMP (WORLDWIDE) - 27338

FLOW CALIBRATOR LAB-BASD 0-500 SCCM MONO - 27337

FLOW CALIBRATOR LAB-BASED 0-50 SCCM MONO - 27335

FLOW CALIBRATOR 0-500 SCCM MONOCHROME - 27333

FLOW CALIBRATOR 0-50 SCCM MONOCHROME - 27331

LINER INLET MINI-LAM 4.0X78.5X6.3MM PK5 - 22265

ESI ELECTRODE GAUGE FOR TURBO V SOURCES - 25832

ELECTRODE ESI LONG-LIFE F/TURBO V SOURCE - 25831

MICROSEAL F/26G OR 23/26G TAPERED NEEDLE - 22264

ACRYLAMIDE-D3 500MG/ML IN ACETO 5ML/AMP - 30153

CANNABICYCLOL (CBL) STANDARD 1000uG/ML - 34130

SPRING FOR TURBO V SOURCES - 25744

O-RING VITON 3/16X1/16INCH - 25743

UNION 1/16INCH FOR TIS PROBE/APCI - 25742

NEXION SETUP SOLUTION 10 UG/ML 500 ML - N8145284

BIN C2 0.63MM LC TIPPED NEEDLE PK5 - 2900717

BIN SDVB 0.63MM LC TIPED NEEDLE PK5 - 2900716

BIN HVDB 0.63MM LC TIPED NEEDLE PK5 - 2900715

BIN APS 0.63MM LC TIPPED NEEDLE PK5 - 2900713

BIN C8 0.63MM LC TIPPED NEEDLE PK5 - 2900712

BIN C2 0.72MM LC TIPPED NEEDLE PK5 - 2900707

BIN SDVB 0.72MM LC TIPED NEEDLE PK5 - 2900706

Topazliner Spme 0.75X6.35X78.5 For PePK5. Inlet Liner, Material: Borosilicate Glass, Deactivation: Premium, low breakdown for accurate and precise low-level GC analyses, manufacturing controls and QC testing for superior reliability across compound class, Liner ID: 0.75mm, Length: 78.5mm, OD: 6.35mm

Topazliner Split 590/690 Gc 1X6.3 PK5. Inlet Liner, Material: Borosilicate Glass, low breakdown for accurate and precise low-level GC analyses, manufacturing controls and QC testing for superior reliability across compound classes, Deactivation: Premium, Liner ID: 1.0 mm, Length: 78.5 mm, OD: 6.3 mm

Inlet Liner Straight W/Wool 4X6.3 PK5. Inlet Liner, Material: Borosilicate Glass, unbelievably low breakdown for accurate and precise low-level GC analyses, unbeatable manufacturing controls and QC testing for superior reliability across compound classes, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3mm

Inlet Liner Splitless Sngle 4X6.5 PK5. Inlet Liner, Single Taper, Material: Borosilicate Glass, with Wool, for PerkinElmer Clarus 590/690 GCs equipped with split/splitless inlets, unbelievably low breakdown for accurate and precise low-level GC analyses, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm

Topazliner Split W/Wool 4X6.3X78.5 PK5. Inlet Liner, with Wool, Material: Borosilicate Glass, low breakdown for accurate and precise low-level GC analyses, unbeatable manufacturing controls and QC testing for superior reliability across compound classes, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm

Topazliner Splitless 2Mmx6.5X78.5 PK5. Inlet Liner, Material: Borosilicate Glass, Straight, Length: 78.5mm, OD: 6.5mm, unbelievably low breakdown for accurate and precise low-level GC analyses, for PerkinElmer Clarus 590/690 GCs equipped with split/splitless inlets, cleanliness for maximized GC

Topazliner With Wool 4X6.3X78.5 PK5. Inlet Liner, Low Pressure Drop Precision, Material: Borosilicate Glass, for PerkinElmer Clarus 590/690 GCs equipped with split/splitless inlets, unbelievably low breakdown for accurate and precise low-level GC analyses, Liner ID: 4.0 mm, Length: 78.5mm, OD: 6.3mm

Charging Kit F/Electronic Leakdetector. Charging Kit, Includes: 6-ft USB charging cable and universal AC power adaptor, for Electronic Leak Detector, Suitable for a wide range of analyte chemistries and sample matrices

USB Cable, for Electronic Leak Detector, Size: 6ft.

Topaz Liner Single Taper 4Mm 6.5 Od PK5. Inlet Liner, Single Taper, Material: Borosilicate Glass, Deactivation: unbelievably low breakdown for accurate and precise low-level GC analyses, Premium, unparalleled cleanliness for maximized GC uptime and lab throughput, Liner ID: 4.0 mm, Length: 78.5 mm

Sulfinert Regulator Dual Stage Cga 330. Regulator, dual stage, cem continuous emission monitoring, Material: Sulfinert-Treated, Fitting : CGA 330, Outlet Gauge: 30 in, 0 to 200 psig (0-1,379 kPa), Outlet Pressure: 0 to 150 psig (0-1,034 kPa), Environmental stack and gas standards, Off-shore platform

Pre Swage Tool 0.5Mm.

Pre Swage Tool 0.4Mm.

Microseal Adaptor Kit W/Nut F/Spme Arrow. Microseal Adaptor Kit, for SPME Arrow, Instrument: for Shimadzu 2010, 2025, and 2030 GCs, Type: SPME Arrow Application Adaptor Kit (3 to 100 psi), Includes: nut (1), adaptor (1), O-rings (4), Eliminates septum cor

Microseal Nut Spme Arrow For Agilent Gcs. Microseal Nut, Instrument: for Agilent GCs, Type: SPME Arrow Application Nut (3 to 100 psi), Eliminates septum coring and prolongs septum life, Simple installation with no injection port modification, Larger diame

Microseal Replacement F/1.5Mm Spme Arrow. Replacement Microseal, for Merlin Microseal Septa, Type: for 1.5 mm SPME Arrow Applications (3 to 100 psi), Choose standard Microseal kits/nuts for use with needles and traditional SPME fibers, choose SPME Arrow M

Microseal Replacement F/1.1Mm Spme Arrow. Replacement Microseal, for Merlin Microseal Septa, Type: for 1.1 mm SPME Arrow Applications (3 to 100 psi), Choose standard Microseal kits/nuts for use with needles and traditional SPME fibers, choose SPME Arrow M

Microseal Adaptor Kit F/Trace Ultra Gcs. Microseal Adaptor Kit, for SPME Arrow, Instrument: for Thermo TRACE Ultra GCs, Type: SPME Arrow Application Adaptor Kit (3 to 100 psi), Includes: nut (1), adaptor (3), O-rings (4), Larger diameter to accept SPME Ar

Microseal Nut 3 To 100Psi For Spme Arrow. Microseal Nut, Instrument: for Thermo TRACE 1300 and 1310 GCs, Type: SPME Arrow Application Nut (3 to 100 psi), Eliminates septum coring and prolongs septum life, Consistently low needle-insertion force, Larger di

PDMS SPME fiber (Polydimethylsiloxane) 30um. PDMS SPME fiber (Polydimethylsiloxane), Fiber thickness: 30um, Fiber length: 10mm, color code: golden, pack of 1pc

Thermolite Plus Septa, Diamter: 11 mm (7/16in), with CenterGuide,Usable to 350 deg C inlet temperature, Ultra-low bleed minimizes background signal, New plasma coating eliminates sticking in the injection port, Precision molding ensures consistent, accurate fit, ready to use

Gas Purifier, Trajan Scientific Americas - 1035210

Gas Filter Connecting Units, Trajan Scientific Americas. Gas Filter Connecting Units, Trajan Scientific and Medical - 1035018

Gas Filter Connecting Units, Trajan Scientific Americas. Gas Filter Connecting Units, Trajan Scientific and Medical - 1035014

Gas Filter Connecting Units, Trajan Scientific Americas. Gas Filter Connecting Units, Trajan Scientific and Medical - 1035028

Gas Filter Connecting Units, Trajan Scientific Americas. Gas Filter Connecting Units, Trajan Scientific and Medical - 1035024

Gas Filter Connecting Units, Trajan Scientific Americas. Gas Filter Connecting Units, Trajan Scientific and Medical - 1035048

Gas Filter Connecting Units, Trajan Scientific Americas. Gas Filter Connecting Units, Trajan Scientific and Medical - 1035044

Gas Filter Connecting Units, Trajan Scientific Americas. Gas Filter Connecting Units, Trajan Scientific and Medical - 1035008

Gas Filter Connecting Units, Trajan Scientific Americas. Gas Filter Connecting Units, Trajan Scientific and Medical - 1035004

Accessories for Trajan, Big Trap Gas Purifier, Trajan Scientific and Medical - 1035300, Clips

Big Trap Gas Purifier, Trajan Scientific and Medical - 1035344

Big Trap Gas Purifier, Trajan Scientific and Medical - 1035348

Big Trap Gas Purifier, Trajan Scientific and Medical - 1035314

Big Trap Gas Purifier, Trajan Scientific and Medical - 1035318

Big Trap Gas Purifier, Trajan Scientific and Medical - 1035324

Big Trap Gas Purifier, Trajan Scientific and Medical - 1035328

Big Trap Gas Purifier, Trajan Scientific and Medical - 1035334

Big Trap Gas Purifier, Trajan Scientific and Medical - 1035338

Gas Purifier Kit, Trajan Scientific Americas - 1035164

Gas Purifier Kit, Trajan Scientific Americas - 1035168

Gas Purifier Kit, Trajan Scientific Americas - 1035154

Gas Purifier Kit, Trajan Scientific Americas - 1035158

Gas Purifier, Trajan Scientific Americas - 1035250

Gas Purifier, Trajan Scientific Americas - 1035230

Gas Purifier, Trajan Scientific Americas - 1035220

SPME Fiber 95um. SPME Fiber, Material: Carbon Wide Range (WR)/PDMS, Bipolar, Color: Dark Blue, Reliable performance, Robust aluminum hub, For PAL system autosamplers, Maximum Temperature: 300 deg C, Operating Temperature: 220-300 deg C, Needle: 23gauge, Thickness: 95um, Fiber Length: 10mm, Pack of 5

Installation Kit, Includes: 1/8In SS metering gas valve, 10ft x 1/8in 304 SS gas supply line (rinsed and cleaned), 1/8in Swagelok tee union, 1/8in-1/16in tube end reducer, 1/8in SS Swagelok ball shut-off valve, MINICYL regulator with 1/8in fittings, For Methanizers/Agilent GC-FIDs

Adaptor, For Agilent Packed FID/GC-FIDs and for Methanizers.

Adaptor, For Agilent Capillary FID/GC-FIDs and For Methanizers.

Heater Chamber, For Methanizers and for Agilent GC-FIDs.

Hydrogen Supply Line, For Methanizers and for Agilent GC-FIDs.

Methanizer (U.S./Japan) kit 1/8in. Methanizer (CH4izer-U.S./Japan) kit, Includes: Methanizer control box, Power cord, Heater chamber, Catalyst tube, Hydrogen supply line, Transition tubing, Adaptor for Agilent capillary FID/Packed FID, 1/8in Swagelok nut and ferrules, Right angle wrench

Methanizer (United Kingdom) kit 1/8in. Methanizer (CH4izer-United Kingdom) kit, Includes: Methanizer control box, Power cord, Heater chamber, Catalyst tube, Hydrogen supply line, Transition tubing, Adaptor for Agilent capillary FID/Packed FID, 1/8in Swagelok nut/ferrules, Right angle wrench

Methanizer (Europe) kit 1/8in. Methanizer (CH4izer-Europe) kit, Includes: Methanizer control box, Power cord, Heater chamber, Catalyst tube, Hydrogen supply line, Transition tubing, adaptor for Agilent capillary FID/Packed FID, 1/8in Swagelok nut and ferrules, Right angle wrench, For Agilent GC-FIDs

Methanizer (China) kit 1/8in. Methanizer (CH4izer-China) kit, Includes: Methanizer control box, Power cord, Heater chamber, Catalyst tube, Hydrogen supply line, Transition tubing, adaptor for Agilent capillary FID/Packed FID, 1/8in Swagelok nut and ferrules, Right angle wrench, For Agilent GC-FIDs

Liner cap, For Thermo GC TRACE Ultra Split/Splitless Injector.

Septum holder and support, For Thermo GC TRACE Ultra Split/Splitless Injector.

Liner cap/septum holder, For Thermo GC TRACE 1300/1310 Split/Splitless Injector.

Septum cap, For Thermo GC TRACE 1300/1310 Split/Splitless Injector.

Split/splitless weldment and septum nut, For Agilent GC 7890 Split/Splitless Injector.

Septum nut for split/splitless weldments, For Agilent GC 6890/7890 Split/Splitless Injector.

Split/splitless weldment, Large, Canister-type filter, For Agilent GC 6890 Split/Splitless Injector.

Injector adaptor cup, For Shimadzu GC 2010 Split/Splitless Injector.

Injector adaptor cup, For Agilent GC 6890/7890 Split/Splitless Injector.

SPME Arrow Conversion Kit, Includes: 2.0 mm ID straight inlet liner, Premium nonstick BTO septa, Septum holder and support, Liner cap, Injector adaptor cup, For Thermo GC TRACE Ultra Split/Splitless Injector

Needle guide/septum nut, For Shimadzu GC 2010 Split/Splitless Injector.

Injection port weldment, For Shimadzu GC 2010 Split/Splitless Injector.

Injector adaptor cup, For Thermo GC TRACE Ultra Split/Splitless Injector.

Injector adaptor cup, For Thermo GC TRACE 1300/1310 Split/Splitless Injector.

SPME Arrow Conversion Kit, Includes: Topaz 1.8 mm ID straight/SPME inlet liner, Premium nonstick BTO septa, Septum cap, Liner cap/septum holder, Injector adaptor cup (cat. No. 27498), For Thermo GC TRACE 1300/1310 Split/Splitless Injector

SPME Arrow Conversion Kit, Includes: Topaz 1.8 mm ID straight/SPME inlet liner, Thermolite Plus septa, Agilent split/splitless weldment and septum nut, Injector adaptor cup, For Agilent GC 7890 Split/Splitless Injector

SPME Arrow Conversion Kit, Includes: Topaz 1.8 mm ID straight/SPME inlet liner, Thermolite Plus septa, Split/splitless weldment, large, canister-type filter, Septum nut for 6890 split/splitless weldments, Injector adaptor cup, For Agilent GC 6890 Split/Splitless Injector

SPME Arrow Conversion Kit, Includes: Topaz 1.8 mm ID straight/SPME inlet liner, Thermolite Plus septa, Injection port weldment, Needle guide/septum nut, Injector adaptor cup, For Shimadzu GC 2010 Split/Splitless Injector

Method Development SPME Fiber Kit, Includes: One SPME fiber each-PDMS 7 um, PDMS 30 um, PDMS 100 um, PA 85 um, Carbon WR/PDMS 95 um, Reliable performance, Robust aluminum hub, For PAL system autosamplers, Needle: 23 gauge, Length: 10mm

Methanizer (Australian) Kit 1/8in. Methanizer (CH4izer-Australian) kit, Includes: Methanizer control box, Power cord, Heater chamber, Catalyst tube, Hydrogen supply line, Transition tubing, Adaptor for Agilent capillary FID/Pcked FID, 1/8in Swagelok nut and ferrules, Right angle wrench

Straight Inlet Liner 5mm. Straight Inlet Liner with Wool, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105mm, OD: 8mm, Liner ID: 5mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensure liner-to-liner reproducibility

Double Taper Gooseneck Inlet Liner 4mm. Double Taper Gooseneck Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.5 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, Ensure liner-to-liner reproducibility

Universal Ring Nut For Superclean.

SilFlow Blanking Ferrules and Pin, Replacement Parts for micro-fluidic platform Gas Chromatography.

Vydac 201TP C18 Column 250x4.6mm. Vydac 201TP C18 column, Long column, and negligible phase leaching, Reliable protein purifications, Chromatographic Properties: Non-endcapped 300A C18 phase, Particle size: 5um, Application: for separation of PAHs, Dimension: 250x4.6mm

SilFlow 4-Port Splitter MCD (0.25).

Ferrule, No Hole, Graphite/Vespel, Contaminant-free, individual blister packs.

SSL Liner, Trace 1300, ID x OD: 2 x 2.75mm, Length: 84.2mm.

Liner 78.5mm. Liner, Geometry:Straight, ID: 4.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Base Deactivated, Packing:Base Deactivated Wool, Material:Borosilicate Glass, for Thermo Scientific GCs

Split liner 3.5mm x 5.0mm x 95mm, for Shimadzu GCs Base Deactivation.

Split liner 3.5mm x 5mm x 95mm, for Shimadzu GCs Siltek Deactivation.

Liner 95mm. Liner, Geometry:Straight/SPME, ID: 0.75 mm, Length:95 mm, OD: 5.0 mm, Deactivation: Siltek, Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Single Taper, ID: 4.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Base Deactivated, Packing:Base Deactivated Wool, Material:Borosilicate Glass, for Bruker/Varian GCs equipped with 1177 inlets

Liner 78.5 mm. Liner, Geometry:Cyclo Uniliner with Top Taper, ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 95mm. Liner, Geometry:Straight/SPME, ID: 0.75 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner 78.5 mm. Liner, Geometry:Uniliner with Top Taper, ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Straight, ID: 4.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Thermo Scientific GCs

Liner 105mm. Liner, Geometry:Straight, ID: 2.0 mm, Length:105 mm, OD: 8.0 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

DMI Inlet Liner, Injector Liner for ATAS LINEX DMI System OPTIC 2 and 3 inlets, Liner Inside (ID) diameter: 3.3 mm, Length: 81 mm, Outside (OD) diameter: 5.0 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Precision Inlet Liner with SV wool (Split Precision Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP) Deactivated, Packing: No Wool, Material: Borosilicate Glass

Single Taper Inlet Liner, for 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 2.0 mm, Length: 95 mm, Outside (OD) diameter: 5.0 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Straight Inlet Liner Splitless Liner. Straight Inlet Liner, Splitless Liner, Injector Liner for GCs, Liner Inside (ID) diameter: 3.5 mm, Length: 95 mm, Outside (OD) diameter: 5.0 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass

Straight Inlet Liner Splitless Liner, Injector Liner for GCs, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.5 mm, Deactivation: Siltek Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass

Single Taper Precision Inlet Liner with Wool, for 17A, 2010 and 2014 GCs equipped with split/splitless inlets, Liner ID: 3.5mm, Length: 95mm, OD: 5.0mm, Deactivation: Intermediate Polarity(IP), Packing: Deactivated Wool, Material: Borosilicate Glass

Straight Inlet Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 5.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.5 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Straight Inlet Liner Splitless Liner. Straight Inlet Liner, Splitless Liner, Injector Liner for GCs, Liner Inside (ID) diameter: 3.5 mm, Length: 95 mm, Outside (OD) diameter: 5.0 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Open Top Uniliner Liner 4mm x 6.3 x 78.5. Open Top Uniliner Liner, No Wool, Injector Liner for GCs, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3mm, Deactivation: Intermediate Polarity (IP) Deactivated, Material: Borosilicate Glass

Precision Inlet Liner with Wool, for 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 95 mm, OD: 5.0 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass

Precision Inlet Liner with SV wool (Split Precision Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Base Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass

Cyclo Single Taper Inlet Liner, Cyclosplitter, for 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Liner ID: 3.5 mm, Length: 95 mm, OD: 5.0 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Fritted Gooseneck Liner ID 3mm x OD 5.0. Fritted Gooseneck Liner, Injector Liner for GCs, Liner Inside (ID) diameter: 3.0 mm, Length: 80 mm, Outside (OD) diameter: 5.0 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Cyclosplitter Liner 3.5mm x 5.0 x 95 for Shimadzu Gas chromatography Siltek Deactivated.

Drilled Uniliner, Hole on Top, 4.0mm x 6.3 x 78.5 for Agilent Gas chromatography Base Deactivated.

Drilled Cyclo Uniliner Inlet Liner 78.5 mm. Drilled Cyclo Uniliner Inlet Liner with Hole near Top and Top Taper, Liner ID: 4 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Split Liner, 4mm x 6.3 x 78.5 for Agilent Gas chromatography Base Deactivated with CarboFrit.

Cyclo Double Gooseneck 4.0mm x 6.5 x 78.5 for Agilent Gas chromatography Base Deactivated.

Splitless Liner 3.5mm x 5.0 x 95 for Shimadzu Gas chromatography IP Deactivated, with Carbofrit.

Low pressure drop liner 4mm x 6.3 x 78.5. Low pressure drop liner, 4mm x 6.3 x 78.5 for Agilent Gas chromatography Siltek Deactivated with Deactivated Wool

Precision Inlet Liner with Wool, Liner ID: 5.0 mm, Length: 105 mm, OD: 8.0 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Drilled Cyclo Uniliner Inlet Liner 78.5 mm. Drilled Cyclo Uniliner Inlet Liner with Hole near Top and Top Taper, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

SGE GC Ferrule. Graphite Front & Back ferrule (OGF, 100%Graphite), 1.0mmID, Use w/ 1/8inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian GC Systems, For 0.45-53mmID Column, Temp450C, Reusable.10PK

SGE GC Inlet Liner. Direct Wide Bore Liner, 3.4mmID, Shimadzu 9A, 16A (SuL-7 Injector). Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Single Tapered Liner, 2.0mmID, Varian 1078, 1079. Minimizes the effect of excess vapor expansion.05PK

SGE GC Inlet Liner. Single Tapered Liner, 3.4mmID, Varian 1078, 1079. Minimizes the effect of excess vapor expansion.05PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 1/4inchID, Use w/ 5mm Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian GC Systems, For 1/4inch OD packed Column, Temp450C, Reusable.10PK

SGE GC Ferrule. GFF (100%Grafite) Sealing Ring, 6mmID. Easy to use, Long lifetime, Temp250C, Forms Soft grip on column, Reusable.10PK

SGE GC Ferrule. Graphite Sealing Ring, (GSR, 100%Graphite), 6.35MM ID, use with SGE short (SSN) nuts and fittings, Agilent Inlet liners, Temp450C, 10PK

SGE GC Inlet Liner. Large Volume Injection Liner, 1.0mmID, Varian 1078/1079. Deactivated. Sintered Glass.05PK

SGE GC Inlet Liner. Tapered FocusLiner, 3.4mmID, Shimadzu 17A (SuL-17 Injector). Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

Ferrule. GVS-II-005 15% Graphite/85% Vespel+ Ferrule, Pkt 10, 0.5 mm. Amount: 10 per pack.

Ferrule. GVF-I-004 15% Graphite/85% Vespel+ Ferrule, Pkt 10, 0.4 mm. Amount: 10 per pack.

SGE GC Inlet Liner. Large Volume Injection Liner, 1.8mmID, Gerstel CIS 4 Injector. Deactivated. Sintered Glass.05PK

SGE GC Inlet Liner. Tapered FocusLiner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.0

SGE GC Inlet Liner. Tapered FocusLiner, 4.0mmID, Perkin Elmer Autosystem. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Tapered FocusLiner, 3.4mmID, Shimadzu 17A (SuL-17 Injector). Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. FocusLiner, 3.4mmID, Shimadzu 14, 15A, 16 (SuL-14 Injector). Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Tapered FocusLiner, 5.0mmID, ThermoQuest(CE) 8000/Trace. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. FocusLiner, 5.0mmID, ThermoQuest(CE) 8000/Trace. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Tapered FocusLiner, 3.4mmID, Varian 1078, 1079. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 1/16 - 0.8MM ID, Special SHORT FOR Agilent (HP) GC Systems, For 0.10 to 0.32mmID column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 1/16 - 0.5MM ID, Special SHORT FOR Agilent (HP) GC Systems, For 0.10 to 0.32mmID column, Temp450C, Reusable.10PK

SGE GC Inlet Liner. Large Volume Injection Liner, 1.0mmID, PSS Injector. Deactivated. Sintered Glass.05PK

SGE GC Column Liner. Packed Column Liner, 3.0mmID, Perkin-Elmer AutoSystem, Deactivated.05PK

SGE GC Column Liner. Packed Column Liner, 1.8mmID, Agilent (HP) 5880, 5890, 6890. Deactivated.25PK

SGE GC Column Liner. Packed Column Liner, 1.8mmID, Agilent (HP) 5880, 5890, 6890. Deactivated.05PK

SGE GC Inlet Liner. Dual. Tapered Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated. Improves mass discrimination w/extreme split ratios.25PK

SGE GC Inlet Liner. Single Tapered Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Minimizes contact of analytes with the bottom of injection port.25PK

SGE GC Inlet Liner. Top Restricted Liner, 2.0mmID, Varian 1075, 1077. Deactivated. Slotted at both ends. Suited For splitless injections and FAST capillary columns.25PK

SGE GC Inlet Liner. Straight-through Universal Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated. Suited For splitless injections and FAST capillary columns.25PK

SGE GC Inlet Liner. Straight-through Universal Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated. Suited For splitless injections and FAST capillary columns.25PK

SGE GC Inlet Liner. Straight-through Universal Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool. Suited For splitless injections and FAST capillary columns.25PK

SGE GC Inlet Liner. FocusLiner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.25PK

SGE GC Inlet Liner. Liner, 1.6mmID x 3mmOD x 73muL SGE AC Control Injector For Control Sim Dist. Used on Agilent (HP) GC.25PK

SGE GC Inlet Liner. Liner, 1.6mmID x 3mmOD x 73muL SGE AC Control Injector For Control Sim Dist. Used on Agilent (HP) GC.10PK

SGE GC Inlet Liner. Straight-through Liner, 5.0mmID, ThermoQuest(CE) 8000/Trace. Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Straight-through Liner, 3.0mmID, ThermoQuest(CE) 8000/Trace. Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Single Taper Liner, 5.0mmID, ThermoQuest(CE) 8000/Trace. Deactivated. Minimizes the effect of excess vapor expansion.05PK

SGE GC Inlet Liner. Single Taper Liner, 3.0mmID, ThermoQuest(CE) 8000/Trace. Deactivated. Minimizes the effect of excess vapor expansion.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 2.0mmID, Perkin Elmer Autosystem. Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 4.0mmID, Perkin Elmer Autosystem. Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. PTV w/ recessed Gooseneck Liner, 1.0mmID, Perkin Elmer 8000, Sigma Series. Deactivated.05PK

SGE GC Inlet Liner. FocusLiner, 3.0mmID, Perkin Elmer Autosystem. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Single Taper Liner, 2.0mmID, Perkin Elmer 8000, Sigma Series. Deactivated. Minimizes the effect of excess vapor expansion.05PK

SGE GC Inlet Liner. Liner, 2.6mmID w/ restricted to 0.5mm, Shimadzu 17A (SuL-17 Injector). Deactivated. Suited For 0.53 mm ID on-columns.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 2.6mmID, Shimadzu 17A (SuL-17 Injector). Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Gooseneck Liner, 3.4mmID restricted to 2mm, Shimadzu 17A (SuL-17 Injector). Deactivated.05PK

SGE GC Inlet Liner. Single Taper Liner, 3.4mmID, Shimadzu 14, 15A, 16 (SuL-14 Injector). Deactivated. Minimizes the effect of excess vapor expansion.05PK

SGE GC Inlet Liner. Gooseneck Liner, 3.4mmID restricted to 2mm, Shimadzu 14, 15A, 16 (SuL-14 Injector). Deactivated.05PK

SGE GC Inlet Liner. FocusLiner, 3.4mmID, Shimadzu 17A (SuL-17 Injector). Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. SPl Liner, 0.8mmID w/ restricted to 0.5mm, Varian 1093/1094. Deactivated. Suited For 0.53 mm ID on-columns.05PK

SGE GC Inlet Liner. SPl Liner, 0.8mmID w/ restricted to 0.25mm, Varian 1093/1094. Deactivated.05PK

SGE GC Inlet Liner. SPl Liner, 0.5mmID w/ restricted to 0.25mm, Varian 1093/1094. Deactivated.05PK

SGE GC Inlet Liner. Top Restricted Liner, 2.0mmID, Varian 1075, 1077, 3400. Deactivated. Slotted at both ends. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. FocusLiner, 4.0mmID, Varian 1075, 1077. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Top Restricted Liner, 2.0mmID, Varian 1075, 1077. Deactivated/Quartz wool. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Tapered Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Dual. Tapered Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Single Tapered Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Minimizes contact of analytes with the bottom of injection port.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Gooseneck Liner, 4.0mmID restricted to 2mm, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 2.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated. Suited For splitless injections and FAST capillary columns.05PK

SGE GC Inlet Liner. FocusLiner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool secured in optimum position For excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool. Suited For splitless injections and FAST capillary columns.05PK

SGE Nut. Varian Brass Column Nut PK 02

Ferrule. GVS-II-005 15% Graphite/85% Vespel+ Ferrule, Pkt 10, 0.5 mm. Amount: 10 per pack.

Ferrule. GVS-II-004 15% Graphite/85% Vespel+ Ferrule, Pkt 10, 0.4 mm. Amount: 10 per pack.

Ferrule. GVF-CE/005 15% Graphite/85% Vespel+ Ferrule, Pkt 10, 0.5 mm. Amount: 10 per pack.

Ferrule. GVF-CE/004 15% Graphite/85% Vespel+ Ferrule, Pkt 10, 0.4 mm. Amount: 10 per pack.

Ferrule. GVF/CE-007 15% Graphite/85% Vespel+ Ferrule, PKT 10, 0.7 mm. Amount: 10 per pack.

GC Ferrules, Graphite Vespel®, SGE. GC Ferrules, Graphite Vespel®, Trajan Scientific and Medical - 0726547, GC Ferrules, Graphite Vespel

Sealing Ring. Viton Sealing Ring. Amount: 10 per pack.

SGE GC Ferrule. Graphite Front & Back ferrule (OGF, 100%Graphite), 0.5mmID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, For 0.22-0.32mmID Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back ferrule (OGF, 100%Graphite), 0.8mmID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, For 0.45-0.53mmID Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back ferrule (OGF, 100%Graphite), 0.5mmID, Use w/ 1/8inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, For 0.22-0.32mmID Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back ferrule (OGF, 100%Graphite), 1/8inchID, Use w/ 1/8inch Swagelok or SGE short style (SSN) nuts, For capillary column, Agilent (HP), TQ(not 800)Varian SGE GC Ferrule, For 1/8inchOD packed Column, Temp450C, Reusable.10

SGE GC Ferrule. Graphite Front & Back ferrule (OGF, 100%Graphite), Graphite ferrule For use with Varian 078/1079 Injector 10PK

SGE GC Ferrule. Graphite Front & Back ferrule (OGF, 100%Graphite), 1/4inchID, Use w/ 1/4inch Swagelok or SGE short style (SSN) nuts, For capillary column, Agilent (HP), Varian SGE GC Ferrule Systems, For 1/4inchOD packed Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front ferrule (GFF, 100%Graphite), Use w/ Swagelok or SGE short style (SSN) nuts, For capillary column, ThermoQuest SGE GC Ferrule Systems (not 8000 Series SGE GC Ferrule), For 0.10 to 0.25mmID column. Easy to use, Long lifetime

SGE GC Ferrule. Graphite Front ferrule (GFF, 100%Graphite), Use w/ Swagelok or SGE short style (SSN) nuts, For capillary column, ThermoQuest SGE GC Ferrule Systems (not 8000 Series SGE GC Ferrule), For 0.45 to 0.53mmID column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front ferrule (GFF, 100%Graphite), 0.5mmID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, For 0.1-0.32mmID Capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front Short ferrule (GFS, 100%Graphite), Special 0.5mmID, Agilent short ferrules, For 0.43 to 0.53mmID column. Easy to use, Long lifetime, Temp450C, Forms Soft grip on column, Reusable.10PK

SGE GC Ferrule. Graphite Front Short Ferrule (GFS, 100%Graphite), Special 0.5mmID, Agilent short ferrules, For 0.1 to 0.32mmID column. Easy to use, Long lifetime, Temp450C, Forms Soft grip on column, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 1.0mmID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, For GLT, Stainless Steel Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 1/8inchID, Use w/ 1/8inch Swagelok or SGE short style (SSN) nuts, For PACKED column, Agilent (HP), Varian SGE GC Ferrule Systems, For 1/8inchOD packed Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Sealing Ring, (GSR, 100%Graphite), 8MM ID, ThermoQuest/CE Inlet liner seals, captured Ferrule, Temp450C, 10PK

SGE GC Sealing Ring. Graphite Sealing Ring, (GSR, 100%Graphite), 1/4inch ID, Agilent Inlet liners, Temp450C, 10PK

SGE GC Ferrule. Graphite Ferrule (GI, 100%Graphite), 5.0mmID, Use w/ Swagelok or SGE short style (SSN) nuts, Shimadzu SGE GC Ferrule Systems, 5mmOD Packed column. Use with Shimadzu Inlet liners, Temp450C, Reusable.10PK

SGE GC Septa. CS (fluoropolymer resin Coated Silicone) Material, 9.5mmOD, Agilent 4700, 5800, 5900, Varian packed column. Temp to 200C, Durability & Sealing-Good, Solvent Resistant-Excellent.50PK

Synthware Viton® O-Ring, Kemtech America - R112, Viton® O-Ring

Stopcocks LUBRI-FLO Lubricant PTFE. Bore of Plug (mm); 2.8 Replacement for 17021H, 17800, 17810 and 29050H. Liquid contact of stopcock surfaces are PTFE. For easier assembly, tip should be wetted before installation.

Airgas® Face Shield - Y99-20020, Face Shield

Airgas® OMI-2 Indicating Purifier, Air Liquide - Y40-23906, OMI-2 Packed Tube

Bronze Phase Separator, Airgas® - Y15-PSB38, Phase Separator, Nitrogen, Argon and Helium Usage

TRANSFER HOSE CRYOGENIC N2 W/ MNPT 6FT - Y154CH629538

Cryogenic Transfer Hose. Nitrogen, Argon, and Helium metal hose. Length: 1.2m.

REGULATOR ANAL 1STAGE NDL CGA 580 100PSI - Y11-244D580

REGULATOR ANAL 1STAGE NDL CGA 350 50PSI - Y11-244B350

CELL SPACER 3 MM - N9302743

Quartz SUPRASIL Flow-Through Cells, PerkinElmer - B0631151

CELL MICRO-QS W/PTFE STPR5X5MM - B0631142

Quartz SUPRASIL Macro Cell with Inlet/Outlet Tubes on Top, PerkinElmer - B0631126, Quartz suprasil macro cell

CELL SEMIMICRO QS 10X4MM W/STP - B0631125

CELL MICRO QS 5X5MM W/O/LID - B0631123

Fluorescence Cells, PerkinElmer - B0631120

Fluorescence Cells, PerkinElmer - B0631110

NIR Quartz SUPRASIL® 300 Macro Cylindrical Cell with PTFE Stopper, PerkinElmer - B0631102, NIR Quartz SUPRASIL® 300 Macro cylindrical cell with PTFE stopper

NIR Quartz SUPRASIL® 300 Macro Cylindrical Cell with PTFE Stopper, PerkinElmer - B0631101, NIR Quartz SUPRASIL® 300 Macro cylindrical cell with PTFE stopper

NIR Quartz SUPRASIL® 300 Macro Cylindrical Cell with PTFE Stopper, PerkinElmer - B0631100, NIR Quartz SUPRASIL® 300 Macro cylindrical cell with PTFE stopper

NIR Quartz SUPRASIL® 300 Macro Cylindrical Cell with PTFE Stopper, PerkinElmer - B0631099, NIR Quartz SUPRASIL® 300 Macro cylindrical cell with PTFE stopper

CYLIN CELL QS 10MM W/STPR2.8ML - B0631095

Special Optical Glass Macro Cylindrical Cell with PTFE Stopper, PerkinElmer - B0631094, Special optical glass macro cyl. Cell

CYLIN CELL OS 50MM W/STPR 14ML - B0631093

CYLIN CELL OS 20MM W/STPR5.6ML - B0631092

Quartz SUPRASIL Flow-Through Cells, PerkinElmer - B0631090

Quartz SUPRASIL® Macro and Micro Cells, PerkinElmer - B0631083, Quartz SUPRASIL® Spectroscopy Cells

Quartz SUPRASIL® Macro and Micro Cells, PerkinElmer - B0631080, Quartz SUPRASIL® Spectroscopy Cells

Special Optical Glass Macro and Micro Cells, PerkinElmer - B0631047, Special Optical Glass Spectroscopy Cells

Special Optical Glass Macro and Micro Cells, PerkinElmer - B0631046, Special Optical Glass Spectroscopy Cells

CELL SEMI MIC QS 20MM LID PK2 - B0631042

NIR Quartz SUPRASIL® 300 Macro Cells, PerkinElmer - B0631036, NIR Quartz SUPRASIL® 300 Spectroscopy Cells

NIR Quartz SUPRASIL® 300 Macro Cells, PerkinElmer - B0631035, NIR Quartz SUPRASIL® 300 Spectroscopy Cells

NIR Quartz SUPRASIL® 300 Macro Cells, PerkinElmer - B0631034, NIR Quartz SUPRASIL® 300 Spectroscopy Cells

NIR Quartz SUPRASIL® 300 Macro Cells, PerkinElmer - B0631033, NIR Quartz SUPRASIL® 300 Spectroscopy Cells

NIR Quartz SUPRASIL® 300 Macro Cells, PerkinElmer - B0631032, NIR Quartz SUPRASIL® 300 Spectroscopy Cells

Quartz SUPRASIL® Macro and Micro Cells, PerkinElmer - B0631029, Quartz SUPRASIL® Spectroscopy Cells

Quartz SUPRASIL® Macro and Micro Cells, PerkinElmer - B0631026, Quartz SUPRASIL® Spectroscopy Cells

NIR Quartz SUPRASIL® 300 Macro Cells, PerkinElmer - B0631017, NIR Quartz SUPRASIL® 300 Spectroscopy Cells

NIR Quartz SUPRASIL® 300 Macro Cells, PerkinElmer - B0631014, NIR Quartz SUPRASIL® 300 Spectroscopy Cells

NIR Quartz SUPRASIL® 300 Macro Cells, PerkinElmer - B0631013, NIR Quartz SUPRASIL® 300 Spectroscopy Cells

Quartz SUPRASIL® Macro and Micro Cells, PerkinElmer - B0631007, Quartz SUPRASIL® Spectroscopy Cells

Special Optical Glass Macro and Micro Cells, PerkinElmer - B0631006, Special Optical Glass Spectroscopy Cells

Special Optical Glass Macro and Micro Cells, PerkinElmer - B0631002, Special Optical Glass Spectroscopy Cells

PAPER F/BUILT IN PRINTER PK5RL - B0508751

Zinc (Zn) System 2 Electrodeless Discharge Lamp, PerkinElmer - N3050691, System 2 electrodeless discharge lamp

Tellurium (Te) System 2 Electrodeless Discharge Lamp, PerkinElmer - N3050680, System 2 electrodeless discharge lamp

Tin (Sn) System 2 Electrodeless Discharge Lamp, PerkinElmer - N3050675, Tin (Sn) system 2 electrodeless discharge lamp

Rubidium (Rb) System 2 Electrodeless Discharge Lamp, PerkinElmer - N3050664, Rubidium (Rb) system 2 edl

Lead (Pb) Electrodeless Discharge Lamp. 1ea. Lead (Pb) System 2 Electrodeless Discharge Lamps for 1100 Spectrometer. Compatible w/ PerkinElmer AA Spectrometers except Models 103,107,290,290b & 820. System 2 EDLs have additional plug compatible with earlier instruments w/ coding capability.

Phosphorus (P) System 2 Electrodeless Discharge Lamp, PerkinElmer - N3050655, Phosphorus (P) system 2 electrodeless discharge lamp

LAMP GERMANIUM SYSTEM 2 EDL - N3050630

Bismuth (Bi) System 2 Electrodeless Discharge Lamp, PerkinElmer - N3050611, Bismuth (Bi) system 2 electrodeless discharge lamp

Silver - Aluminum - Chromium - Copper - Iron - Magnesium Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050216, Multi-element lumina HCL

Luminaâ„¢ Aluminum (Al) - Copper (Cu) - Iron (Fe) - Titanium (Ti) Hollow Cathode Lamp, PerkinElmer - N3050211, Luminaâ„¢ Multi-Element hollow cathode lamp

Luminaâ„¢ Silver (Ag) - Chromium (Cr) - Copper (Cu) - Nickel (Ni) Hollow Cathode Lamp, PerkinElmer - N3050210, Luminaâ„¢ multi-element hollow cathode lamp

LAMP SN-TE LUMINA HCL CODED - N3050206

LAMP PT-RU LUMINA HCL CODED - N3050205

Zirconium (Zr) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050192, Zirconium (Zr) lumina HCL

Ytterbium (Yb) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050190, Ytterbium (Yb) lumina HCL

Yttrium (Y) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050189, Yttrium (Y) lumina HCL

LAMP WL LUMINA HCL CODED - N3050187

Thallium (Tl) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050183, Thallium (Tl) Luminaâ„¢ HCL

LAMP TB LUMINA HCL CODED - N3050178

Tantalum (Ta) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050177, Tantalum (Ta) lumina HCL

Strontium (Sr) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050176, Strontium (Sr) Luminaâ„¢ hollow cathode lamp

Samarium (Sm) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050174, Samarium (Sm) lumina HCL

LAMP SC LUMINA HCL CODED - N3050171

Ruthenium (Ru) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050168, Ruthenium (Ru) Luminaâ„¢ hollow cathode lamp

Luminaâ„¢ Rhenium (Re) Hollow Cathode Lamp, PerkinElmer - N3050165, Luminaâ„¢ hollow cathode lamp

Praseodymium (Pr) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050161, Praseodymium (Pr) lumina HCL

Luminaâ„¢ Neodymium (Nd) Hollow Cathode Lamp, PerkinElmer - N3050150, Luminaâ„¢ Hollow cathode lamp

Luminaâ„¢ Niobium (Nb) Hollow Cathode Lamp, PerkinElmer - N3050149, Luminaâ„¢ Hollow cathode lamp

Lanthanum (La) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050141, Lanthanum (La) lumina HCL

LAMP IR LUMINA HCL CODED - N3050138

Holmium (Ho) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050135, Holmium (Ho) lumina HCL

LAMP HF LUMINA HCL CODED - N3050133

LAMP GE LUMINA HCL CODED - N3050130

Luminaâ„¢ Gadolinium (Gd) Hollow Cathode Lamp, PerkinElmer - N3050129, Luminaâ„¢ Hollow cathode lamp

LAMP EU LUMINA HCL CODED - N3050124

LAMP ER LUMINA HCL CODED - N3050123

Dysprosium (Dy) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050122, Dysprosium (Dy) lumina HCL

Beryllium (Be) Luminaâ„¢ Hollow Cathode Lamp, PerkinElmer - N3050110, Beryllium (Be) Luminaâ„¢ HCL

RING 3-SET CYL NONZEEMAN HGA GRAP PK5 - B0180363

HGA Pyrocoated Graphite Tubes with L'vov Groove, PerkinElmer - B0137111, HGA Pyrocoated Graphite Tubes with L'vov Groove

HGA Pyrocoated Graphite Tubes with L'vov Groove, PerkinElmer - B0121092, HGA Pyrocoated Graphite Tubes with L'vov Groove

RING COOLING GRAPHITE F/MHS-10 QZ CELL - B0094413

TUBE HGA UNGRV PYRCTD GRAP 3100SPECPK50 - B0091504

TUBING .007 3 FT - 02540838

Fitting Seal. 1 ea. High pressure fitting seal.

STATOR - 09904953

ROTOR SEAL VESPEL - 09904955

FEM CONN 1/8 TO 1/4 - 09903906

TUBE NEEDLE PORT - 09904805

PUMP PRIMING SYR 30ML - 09904849

MICROBORE FLOWCELL ASSEMBLY - 29000544

PULSE COMPENSATOR REPAIR KIT: - N2600313

Solvent Spargers, PerkinElmer - N2600089, 40 µm, Solvent Reservoir Sparger

LC BIO FILTER SEAL - N2601262

Sample Trays, PerkinElmer - N2930043, 225-Position Sample Tray, for Microvials/High Throughput

Stainless Steel Sample Holding Loop. 1ea. SS Sample Holding Loop for PerkinElmer Series 200 LC Autosampler. Replacement parts for PerkinElmer autosamplers are identical to the components contained in your instrument at the time of purchase.

DILUTION KIT 80 POS SAMP TRAY - N2930314

Sample Trays, PerkinElmer - N2931097, 100-Position Sample Tray

INJECTOR - COMPLETE 9725 - N9306020

TUBING-TEFZEL 10 FEET - N9301029

VALVE-9725I INJ PEEK SW - N9306018

Diazomethane Generators, Milli-mole. Generate diazomethane and other gases for gas chromatography, mass spectroscopy and NMR studies. Complete with 'O' ring, 13-425 screw cap with cut-out top, and fluoropolymer resin faced rubber liner.

Diazomethane Generators With [standard taper] Clear-Seal Grease-Free Joints, Milli-mole. Generate diazomethane and other gases for gas chromatography, mass sepctroscopy and NMR studies. Utilize Clear-Seal grease-free joints which have never been ground. No 'O' ring required.

6'X1/8INSS 10% OV225 CHROMSORB - 684

BRASS CAP 1/4IN - B-400-C

Swagelok GC Gas Fitting, Brass Male Pipe Connector. 3.2x3.2mm Brass Male Pipe Connector.

Swagelok GC Gas Fitting, Brass Male Pipe Connector. 3.2x3.2mm Brass Male Pipe Connector.

Swagelok GC Gas Fitting, Brass Nut. 1.6mm Brass Nut.

Swagelok GC Gas Fitting, Brass Tube Reducer. 1.6x3.2mm Brass Tube Reducer.

PORAPAK 6'X1/8 N 80/100 - 674

Swagelok GC Gas Fitting, fluoropolymer resin Back Ferrule. 1.6mm fluoropolymer resin Back Ferrule.

Swagelok GC Gas Fitting, fluoropolymer resin Front Ferrule. 1.6mm fluoropolymer resin Front Ferrule.

SS FPT FEMALE EA 3/8 X 1/4 - SS-600-7-4

BRASS FPT FEMALE 3/8IN X 1/4IN - B-600-7-4

CAPILLARY COLUMN INSTAL KIT - 6304

BRASS MPT MALE 3/8IN X 1/4IN - B-600-1-4

Swagelok GC Gas Fitting, Brass Tube Reducer. 6.4x3.2mm Brass Tube Reducer.

BRASS PLUG 1/4IN - B-400-P

Fused Silica Y-Shaped Union. Linear tapers of a minimum angle, 1:1 split ratio, narrow angle between output legs. Low dead-volume. 2[degree] maximum contact angle. 20+-5[degree] angle between the legs. 40+-5mm length. 2000+-100um outside diameter. 800+-50um initial inside diameter.

Silica Union. Universal size. Fused silica union.

FUSED SILICA DEACT METER - 6530660

FUSED SILICA DEACT METER - 6320450

FUSED SILICA DEACT METER - 6250350

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-81, Ferrules for Reducing Columns

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-68, Ferrules for Reducing Columns

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-64, Ferrules for Reducing Columns

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-03, Ferrules for Straight Columns

Ferrules for HP/Agilent. Capillary column ferrule for HP 5890/6890. 0.8mm I.D. graphite. Usable to 450[degree]C.

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-08, Ferrules for Capillary Columns

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-10-HP, Ferrules for Capillary Columns, HP/Agilent Short

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-05, Ferrules for Capillary Columns

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-05-HP, Ferrules for Capillary Columns, HP/Agilent Short

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-02, Ferrules for Straight Columns

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-04, Ferrules for Capillary Columns

Graphite Ferrules for Gas Chromatography, Ohio Valley - GF-01, Ferrules for Straight Columns

SEPTA 77 HP5890 SER 2 PK-50 - 237785

SEPTA 77 HITACHI PK50 - 237765

SEPTA 77 SHIMADZU PK50 - 237735

SEPTA 77 PK-50 1/2IN - 237725

Septa 77 High Temperature Septa. Size: 11.1mm. Soft, resealable septum with extremely low bleed characteristics. Molded for dimensional consistency.

Septa 77 High Temperature Septa. Size: 9.5mm. Soft, resealable septum with extremely low bleed characteristics. Molded for dimensional consistency.

OV®-1, Chromatography Columns, Ohio Valley - 115-2501, 21508-400

Direct Liner. 1.5mm. For HP/Agilent columns. Deactivated.

Split/Spiltless Liner. For HP columns. Packed with wool. ARD activated.

FERRULES TEF RDCG1/4X1/8INPK10 - TF-81

FERRULES TEFRDCG1/8X1/16INPK10 - TF-68

FERRULES TEFRDCG1/4X1/16INPK10 - TF-64

FERRULES PTFE 1/4 PK-10 - TF-03

FERRULES PTFE 1/8 PK10 - TF-02

FERRULES PTFE 1/16 PK-10 - TF-01

Swagelok® GC Fittings, Ohio Valley - VWT-404-1, 1/4 IN., PTFE Back Ferrules

Swagelok® GC Fittings, Ohio Valley - VWT-204-1, 1/8 IN., PTFE Back Ferrules

Swagelok® GC Fittings, Ohio Valley - VWT-104-1, 1/16 IN., PTFE Back Ferrules

Swagelok GC Gas Fitting. 6.35mm Stainless Steel Back Ferrule.

Swagelok® GC Fittings, Ohio Valley - VWSS-104-1, 1/16 IN., Stainless Steel Back Ferrules

Swagelok GC Gas Fitting, Brass Back Ferrule. 6.35mm Brass Back Ferrule.

Swagelok GC Gas Fitting, Brass Back Ferrule. 3.2mm Brass Back Ferrule.

Swagelok GC Gas Fitting, Brass Back Ferrule. 1.6mm Brass Back Ferrule.

Swagelok® GC Fittings, Ohio Valley - VWT-403-1, 1/4 IN., PTFE Front Ferrules

Swagelok® GC Fittings, Ohio Valley - VWT-203-1, 1/8 IN., PTFE Front Ferrules

Swagelok® GC Fittings, Ohio Valley - VWT-103-1, 1/16 IN., PTFE Front Ferrules

Swagelok GC Gas Fitting. 6.4mm Stainless Steel Front Ferrule.

Swagelok® GC Fittings, Ohio Valley - VWSS-103-1, 1/16 IN., Stainless Steel Front Ferrules

Swagelok GC Gas Fitting, Brass Front Ferrule. 6.35mm Brass Front Ferrule.

Swagelok GC Gas Fitting, Brass Front Ferrule. 3.2mm Brass Front Ferrule.

Swagelok GC Gas Fitting, Brass Front Ferrule. 1.6mm Brass Front Ferrule.

Swagelok® GC Fittings, Ohio Valley - VWSS-402-1, 1/4 IN., Stainless Steel Nuts

Swagelok® GC Fittings, Ohio Valley - VWSS-202-1, 1/8 IN., Stainless Steel Nuts

Swagelok® GC Fittings, Ohio Valley - VWSS-102-1, 1/16 IN., Stainless Steel Nuts

Swagelok GC Gas Fitting, Brass Nut. 6.35mm Brass Nut.

Swagelok GC Gas Fitting, Brass Nut. 3.2mm Brass Nut.

NUTS BRASS PK-10 1/16IN - VWB-102-1

FINE METERING VALVE SS 1/16A - SS-SS1-A

FINE METERING VALVE SS 1/8A - SS-SS2-A

FINE METERING VALVE B 1/16A - B-SS1-A

TOGGLE VALVES BRASS 1/8X1/8A - B-0GS2-A

TOGGLE VALVES BRASS 1/8X1/8S - B-0GS2

CONNECTORS SS 1/4TX1/4P - SS-400-7-4

CONNECTORS SS 1/4TX1/8P - SS-400-7-2

CONNECTORS BRASS PK2 1/4TX1/4P - VWB-400-7-4

CONNECTOS BRASS PK2 1/4TX1/8PI - VWB-400-7-2

CONNECTORS BRASS PK2 1/8TX1/8P - VWB-200-7-2

CONNECTORS SS 1/8TX1/4P - SS-200-1-4

Swagelok GC Gas Fitting. 6.4x6.4mm Stainless Steel Male Pipe Connector.

CONNECTORS SS 1/4TX1/8P - SS-400-1-2

Swagelok GC Gas Fitting. 3.2x3.2mm Stainless Steel Male Pipe Connector.

CONNECTORS FEMALE SS FPT 1/8IN - SS-200-7-2

CONNECTORS BRASS PK2 1/8TX1/4P - VWB-200-1-4

CONNECTORS BRASS PK2 1/4TX1/4P - VWB-400-1-4

CONNECTORS BRASS PK2 1/4TX1/8P - VWB-400-1-2

CONNECTORS BRASS PK2 1/8TX1/8P - VWB-200-1-2

MINI QUICK CONNECTS SS 1/8IN - SS-QM2-B-200

MINI QUICK CONNECTS SS 1/8IN - SS-QM2-S-200

BORED THRU UNIONS SS 1/4X1/4 - SS-400-6BT

Swagelok GC Gas Fitting. 6.35mm Stainless Steel Union.

UNIONS SS 1/8IN - SS-200-6

UNIONS BRASS PK-2 1/4IN - VWB-400-6

UNIONS BRASS PK-2 1/8IN - VWB-200-6

PLUGS SS 1/8IN - SS-200-P

PLUGS SS 1/16IN - SS-100-P

PLUGS BRASS PK-5 1/4IN - VWB-400-P

CONNECTOR FEMALE BRASSFPT1/8IN - B-200-7-2

PLUGS BRASS PK-5 1/8IN - VWB-200-P

CAPS SS 1/4 PK1 - SS-400-C

CAP STAINLESS STEEL 1/16IN - SS-100-C

CAPS SS PK-1 1/8IN - SS-200-C

CAPS BRASS PK-5 1/4IN - VWB-400-C

CAPS BRASS PK-5 1/8IN - VWB-200-C

CAPS BRASS PK-5 1/16IN - VWB-100-C

PIPE ADAPTORS B PK-2 1/4X1/4 - VWB-4-TA-1-4

PIPE ADAPTORS B PK-2 1/4X1/8 - VWB-4-TA-1-2

Swagelok® GC Fittings, Ohio Valley - VWSS-401-PC2, 1/4 - 1/8 IN., Stainless Steel Port Connectors

Swagelok® GC Fittings, Ohio Valley - VWSS-201-PC, 1/8 IN., Stainless Steel Port Connectors

REDUCERS SS 1/4X1/8 - SS-400-R-2

REDUCERS SS 1/8X1/4 - SS-200-R-4

REDUCERS SS 3/16X1/4 - SS-300-R-4

Hardware Fitting. Stainless steel reducer. Size: 1.6x3.2mm.

REDUCERS BRASS PK-2 1/4X1/8 - VWB-400-R-2

REDUCERS BRASS PK-2 1/8X1/4 - VWB-200-R-4

REDUCERS BRASS PK-2 1/16X1/8 - VWB-100-R-2

Hardware Fitting. Stainless steel reducer. Size: 6.4x3.2mm.

Swagelok GC Gas Fitting. 6.4x1.6mm Stainless Steel Reducer Union.

Swagelok GC Gas Fitting. 3.2x1.6mm Stainless Steel Reducer Union.

Swagelok GC Gas Fitting, Brass Reducer Union. 6.4x 3.2mm Brass Reducer Union.

Swagelok GC Gas Fitting, Brass Reducer Union. 6.4x1.6mm Brass Reducer Union.

Swagelok GC Gas Fitting, Brass Reducer Union. 3.2x1.6mm Brass Reducer Union.

UNION CROSSES B 1/4IN - B-400-4

Hardware Fitting. Brass union crosses. Size: 3.2mm.

TEES SS 1/6IN - SS-100-3

Swagelok GC Gas Fitting, Brass Tees. 6.4mm Brass Tees.

Swagelok GC Gas Fitting, Brass Tees. 3.2mm Brass Tees.

TEES BRASS 1/6IN - B-100-3

PORAPAK QA 80/100 6FTX1/8IN - 676

PORAPAK T 6FT X1/8IN 80/100 - 670

PORAPAK 6'X1/8 SS Q80/100 - 662

6'X1/8INSS 10% OV101CHROMOSORB - 654

Carbowax 20M Capillary Column. Length: 1.8m. I.D.: 3.2mm. Polyethylene glycol (PEG). High polarity. Bonded and crosslinked. Stainless steel.

GC Tubing. Premium grade copper tubing. Dimensions: 6.4O.D.x4.8I.D.mm. Manufactured specifically for gas chromatography. Length: 15.2m.

GC Tubing. Premium grade copper tubing. Dimensions: 3.1O.D.x1.7I.D.mm. Manufactured specifically for gas chromatography. Length: 15.2m.

GC Tubing. Premium grade type 304 stainless steel tubing. Dimensions: 6.4O.D.x5.3I.D.mm. Manufactured specifically for gas chromatography. Specially tempered for easy bending. Length: 15.2m.

GC Tubing. Premium grade type 304 stainless steel tubing. Dimensions: 3.1O.D.x2.2I.D.mm. Manufactured specifically for gas chromatography. Specially tempered for easy bending. Length: 15.2m.

DMCS Treated Glass Wool. Dimethyldichlorosilane treated glass wool. 50g.

Glass Wool Extractor. Hook end extractor.

Aluminum Column Tags. Designed to be permanently attached to columns for identification. Tags can be engraved using a vibrator or simply with a ball point pen.

PLASTIC END CAPS 1/8IN PK100 - 2-0018

Span 80 or Sorbitan Monooleate. A sorbitan ester widely used in food products and oral pharmaceuticals. 25g. Temperature Range: 20-150[degree]C.

1/4IN PTFE BACK FERRULE - T-404-1

1/4IN PTFE FRONT FERRULE - T-403-1

Swagelok GC Gas Fitting. 6.35mm Stainless Steel Nut.

Swagelok GC Gas Fitting. 1.6mm Stainless Steel Back Ferrule.

Swagelok GC Gas Fitting. 1.6mm Stainless Steel Front Ferrule.

1/16SS CAPILLARY UNION EACH - SS-1FO-6GC

CUST SPEC PACKING 5880 CONFG A - HP220-2.02

Swagelok GC Gas Fitting, Brass Female Pipe Connector. 6.4x6.4mm Brass Female Pipe Connector.

Swagelok GC Gas Fitting, Brass Female Pipe Connector. 6.4x3.2mm Brass Female Pipe Connector.

Swagelok GC Gas Fitting, Brass Male Pipe Connector. 6.4x3.2mm Brass Male Pipe Connector.

Swagelok GC Gas Fittings, Brass Union. 3.2mm Brass Union.

Swagelok GC Gas Fitting, Brass Plug. 3.2mm Brass Plug.

Swagelok GC Gas Fitting, Brass Cap. 3.2mm Brass Cap.

Swagelok GC Gas Fitting, Brass Male Pipe Connector. 1.6x3.2mm Brass Male Pipe Connector.

GC SEPTA 11MM HI-TEMP PK25 - 502 289

GC SEPTA PLUGS HI-TEMP PK25 - 502 294

GC Inlet Liners, SGE. SGE Inlert Liners, GC, Trajan Scientific and Medical - 092048, Split, GC Inlet Liner, FocusLiner, 105 mm (5 mm I.D.)

SGE GC Ferrule. Siltite (Metal) Ferrule & Nut, Shimadzu Director Port, for 0.25mmID Capillary Column (0.4mmID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules/2Nuts/PK

SGE GC Ferrule. Graphite Sealing Ferrule Ring (GI, 100%Graphite), 5.0mmID, Use w/ Swagelok or SGE short style (SSN) nuts, Shimadzu 17A (SPL-17 Injector), Use with Shimadzu Inlet liners, Temp450C, Reusable.10PK

SGE GC Ferrule. Siltite (Metal) Ferrule, Shimadzu Director Port, for 0.25mmID Capillary Column (0.4mmID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules/PK

Amsco Recording Paper. Recording paper for Basil Washers; Amsco Eagle Sterilizers, models 10, 180, and 3000 (stage 3); Amsco Reliance 3400; and System 1 Sterile Processing System.

SGE GC Union. Stainless Steel, for 1/16 tubing, 0.8mm ID with glass internal

SGE GC Union. Stainless Steel, for 1/16 tubing, 0.5mm ID with glass internal

SGE Adapter Kit. For 1/16Swagelok female fitting to SGE fitting

SGE GC Union. Stainless Steel Tee - 1/16- Two male ends and one female end

SGE GC Union. Stainless Steel - 1/16 - Male and Female ends

SGE GC Mini-Union. Stainless Steel, for 1/16 tubing, 0.8mm ID with Glass internal

SGE GC Mini-Union. Stainless Steel, for 1/16 tubing, 0.5mm ID with Glass internal

SGE GC Mini-Union. Stainless Steel, for 1/16 tubing, 0.4mm ID with Glass internal

SGE GC Mini-Union. Stainless Steel, for 1/16 tubing, 0.3mm ID with Glass internal

SGE GC Union. Cross Stainless Steel, for 1/16inchOD Tubing

SGE GC Union. Tee Stainless Steel, for 1/16inchOD to 1/16inchOD to 1/4inchOD Tubing

SGE GC Union. Tee Stainless Steel, for 1/8inchOD to 1/16inchOD to 1/16inchOD Tubing

SGE GC Union. Tee Stainless Steel, for 1/16inchOD to 1/16inchOD to 1/16inchOD Tubing

SGE Nut. Carla Erba brass nut 1/16 with 1.2 mm hole PK02

SGE GC Nut. Extended Stainless Steel for SGE long fittings 1/16 with 1/16 hole PK5

SGE GC Nut. Extended Stainless Steel for SGE long fittings 1/4 with 1/4 hole PK5

SGE GC Nut. Extended Brass for SGE long fittings 1/16 with 1.2mm hole PK5

SGE GC Nut. Extended Stainless Steel for SGE long fittings 1/16 with 1.2mm hole PK5

SGE GC Nut. Brass for SGE normal or short fittings 1/16 with 1/16 hole PK5

GC Male Nut. Stainless Steel for SGE EXTENDED fittings 1/16 with 1/16 hole PK5

SGE GC Nut. Stainless Steel for SGE normal or short fittings 1/16 with 1/16 hole PK5

SGE Nut. Mini-nut 1/16 1.2mm hole for mini-unions from SGE

SGE GC Union. Stainless Steel, for 1/16inchOD tubing

SGE GC Union. Bulkhead Stainless Steel w/ Locknut, for 1/16inchOD tubing

SGE GC Union. Bulkhead Reducing Stainless Steel w/ Lockout, for 1/8inchOD to 1/16inchOD tubing

SGE GC Union. Reducing Stainless Steel, for 1/8inchOD to 1/16inchOD tubing

SGE GC Union. Stainless Steel, for 1/4inchOD tubing

SGE GC Union. Reducing Stainless Steel, for 1/4inchOD to 1/16inchOD tubing

SGE GC Inlet Liner. Liner, 3mmID, ATAS Optic. Frit in place to hold packing Large volume injection. Deactivated.05PK

SGE GC Inlet Liner. FocusLiner, 3mmID, ATAS Optic. Deactivated w/Quartz wool secured in optimum position for excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Gooseneck Liner, 4.0mmID restricted to 2um, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool.25PK

SGE GC Inlet Liner. 0.8mmID, ThermoQuest/CE Injector. Deactivated.Straight.05PK

SGE GC Inlet Liner. 2mmID, ThermoQuest/CE PTV Injector. Deactivated.Straight.05PK

SGE GC Inlet Liner. Liner, 0.75mmID, Varian 1078/1079. Designed for SPME analyses. Deactivated.05PK

SGE GC Inlet Liner. FAST FocusLiner, 2.3mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool secured in optimum position for excellent reproducibility. Improves mass discrimination w/extreme split ratios.25PK

SGE GC Inlet Liner. FAST FocusLiner, 2.3mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool secured in optimum position for excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. FocusLiner, 2mmID, PE PSS Injector. Deactivated w/Quartz wool secured in optimum position for excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. 2mmID, PE PSS Injector. Deactivated.Straight.05PK

SGE GC Inlet Liner. Liner, Shimadzu 17A PTV Injector. SPME Liner. Deactivated.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 3.4mmID, Shimadzu 17A (SuL-17 Injector). Deactivated. Suited for splitless injections and FAST capillary Columns.05PK

SGE GC Inlet Liner. Recessed Gooseneck Liner, 3.4mmID, Shimadzu 17A (SuL-17 Injector). Deactivated w/Quartz wool.05PK

SGE GC Inlet Liner. Straight-through Universal Liner, 0.5mmID, Varian 1078/1079. Deactivated. Suited for splitless injections and FAST capillary Columns.05PK

SGE GC Inlet Liner. Top Restricted FocusLiner, 4.0mmID, Varian 1075, 1077. Deactivated w/Quartz wool secured in optimum position for excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Inlet Liner. Recessed Gooseneck Liner, 2.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated. Suited for splitless injections and FAST capillary Columns.05PK

SGE GC Inlet Liner. Tapered FocusLiner, 4.0mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool secured in optimum position for excellent reproducibility. Improves mass discrimination w/extreme split ratios.2

SGE GC Inlet Liner. FAST FocusLiner, 2.3mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool secured in optimum position for excellent reproducibility. Improves mass discrimination w/extreme split ratios.25PK

SGE GC Inlet Liner. FAST FocusLiner, 2.3mmID, Agilent (HP) 5890, 6890, 6850, 4890, Thermo 9001, GCQ, Varian 1177. Deactivated w/Quartz wool secured in optimum position for excellent reproducibility. Improves mass discrimination w/extreme split ratios.05PK

SGE GC Ferrule. SILTITE (Metal) Mini-union Nuts for SilTite mini-unions only. SilTite Nut and Ferrule do not need to be re-tightened once oven heats.05PK

SGE GC Ferrule. Siltite (Metal) Mini Union, 0.53mmID Capillary Column. Siltite Nut and Ferrule do not need to be re-tightened once oven heats.1 Union/5 Ferrules/PK

SGE GC Ferrule. Siltite (Metal) Mini Union, 0.32mmID Capillary Column. Siltite Nut and Ferrule do not need to be re-tightened once oven heats.1 Union/5 Ferrules/PK

SGE GC Ferrule. Siltite (Metal) Mini Union, 0.25mmID Capillary Column. Siltite Nut and Ferrule do not need to be re-tightened once oven heats.1 Union/5 Ferrules/PK

SGE GC Ferrule. Siltite (Metal) Mini-union Ferrule for SilTite mini-unions only, 0.53mmID Capillary Column (0.8mmID). Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10PK

SGE GC Ferrule. Siltite (Metal) Mini-union Ferrule for SilTite mini-unions only, 0.32mmID Capillary Column (0.5mmID). Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10PK

SGE GC Ferrule. Siltite (Metal) Mini-union Ferrule for SilTite mini-unions only, 0.25mmID Capillary Column (0.4mmID). Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Thermo-Finnigan Injection Port, for 0.53mmID Capillary Column, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10 Ferrules&2 Nuts/PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Thermo-Finnigan Injection Port, for 0.32mmID Capillary Column, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10 Ferrules&2 Nuts/PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Thermo-Finnigan Injection Port, for 0.25mmID Capillary Column, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10 Ferrules&2 Nuts/PK

SGE GC Ferrule. SILTITE (Metal) Base Seal, Agilent Injection Port, for Siltite Injector nut and ferrule only, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10PK

SGE GC Ferrule. Siltite (Metal) Gold Base Seal, Agilent Injection Port, for Siltite Injector nut and ferrule Only, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.02PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Shimadzu Injection Port and non-MS detectors, for 0.53mmID Capillary Column, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules&2Nuts/PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Shimadzu Injection Port and non-MS detectors, for 0.32mmID Capillary Column, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules&2Nuts/PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Shimadzu Injection Port and non-MS detectors, for 0.25mmID Capillary Column, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules&2Nuts/PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Varian connectors, for 0.53mmID Capillary Column (0.8mmID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules/2Nuts/PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Varian connectors, for 0.32mmID Capillary Column (0.5mmID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules/2Nuts/PK

SGE GC Ferrule. SILTITE (Metal) Ferrule & Nut Kit, Varian connectors, for 0.25mmID Capillary Column (0.4mmID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules/2Nuts/PK

SGE GC Ferrule. Siltite (Metal) Ferrule, Nut & Gold Seal Kit, Agilent Injection Port, for 0.53mmID Capillary Column (0.8mmID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules/2Nuts/2Sseals/PK

SGE GC Ferrule. Siltite (Metal) Ferrule, Nut & Gold Seal Kit, Agilent Injection Port, for 0.32mmID Capillary Column (0.5mmID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules/2Nuts/2Sseals/PK

SGE GC Ferrule. Siltite (Metal) Ferrule, Nut & Gold Seal Kit, Agilent Injection Port, for 0.25mmID Capillary Column (0.4mmID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10Ferrules/2Nuts/2Sseals/PK

SGE GC Ferrule. Siltite (Metal) Nut, Agilent Injection Port, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.05PK

SGE GC Ferrule. Siltite (Metal) Nut, 1/16 hole Capillary Column, (10/32 Thread). Siltite Nut and Ferrule do not need to be re-tightened once oven heats.05PK

SGE GC Ferrule. Siltite (Metal) Nut, 0.8mm hole Capillary Column, (10/32 Thread). Siltite Nut and Ferrule do not need to be re-tightened once oven heats.05PK

SGE GC Ferrule. Siltite (Metal) Ferrule, 1/16inchID Capillary Column. Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10PK

SGE GC Ferrule. Siltite (Metal) Ferrule, for 0.53mmID Capillary Column (0.8MM ID). Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10PK

SGE GC Ferrule. Siltite (Metal) Ferrule, for 0.32mmID Capillary Column (0.5MM ID). Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10PK

SGE GC Ferrule. Siltite (Metal) Ferrule, for 0.25mmID Capillary Column (0.4MM ID), Siltite Nut and Ferrule do not need to be re-tightened once oven heats.10PK

SGE GC Ferrule. SILTITE (Metal) Ferrule Kit, 1/16inch.10F & 2Nuts, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.

SGE GC Ferrule. SILTITE (Metal) Ferrule Kit, for 0.53 Columns (0.8mmID), 1/16inch, 10 ferrules & 2Nuts, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.

SGE GC Ferrule. SILTITE (Metal) Ferrule Kit, for 0.32 Columns (0.5mmID), 1/16inch, 10 ferrules & 2Nuts, Siltite Nut and Ferrule do not need to be re-tightened once oven heats.

SGE GC Ferrule. Graphite/Vespel Front & Back Ferrule (MGVF, 15%SGE GC Ferrule Graphite/85%Vespel) for SGE Mini-Union, 0.8mmID, for coupling capillary Column, Temp350C.10PK

SGE GC Ferrule. Graphite/Vespel Front & Back Ferrule (MGVF, 15%SGE GC Ferrule Graphite/85%Vespel) for SGE Mini-Union, 0.5mmID, for coupling capillary Column, Temp350C.10PK

SGE GC Ferrule. Graphite/Vespel Front & Back Ferrule (MGVF, 15%SGE GC Ferrule Graphite/85%Vespel) for SGE Mini-Union, 0.4mmID, for coupling capillary Column, Temp350C.10PK

SGE GC Ferrule. Graphite/Vespel Front & Back Ferrule (MGVF, 15%SGE GC Ferrule Graphite/85%Vespel) for SGE Mini-Union, 0.3mmID, for coupling capillary Column, Temp350C.10PK

SGE GC Ferrule. Graphite/Vespel Front & Back Ferrule (MGVF, 15%SGE GC Ferrule Graphite/85%Vespel) for SGE Mini-Union, No Hole, Temp350C.10PK

SGE O-Ring. Viton O-Ring for PerkinElmer Autosystem Injection Systems

SGE GC Ferrule. Graphite/Vespel Sealing Ring, (VSR, 15%Graphite/85%Vespel), 1/16inch ID, use with SGE short (SSN) nuts and fittings, Temp350C, 10PK

SGE GC O-Ring. Graphite Sealing Ring, (GSR, 100%Graphite), 1/16inch ID, use with SGE short (SSN) nuts and fittings, Temp450C, 10PK

SGE GC Ferrule. Graphite/Vespel Sealing Ring, (VSR, 15%Graphite/85%Vespel), 1/8inch ID, use with SGE short (SSN) nuts and fittings, Temp350C, 10PK

SGE GC Ferrule. Graphite/Vespel Sealing Ring, (VSR, 15%Graphite/85%Vespel), 1/4inch ID, use with SGE short (SSN) nuts and fittings, Temp350C, 10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (MOGF, 100%Graphite) for SGE Mini Union, 0.8mmID, Agilent (HP) SGE GC Ferrule Systems, for coupling capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (MOGF, 100%Graphite) for SGE Mini Union, 0.5mmID, Agilent (HP) SGE GC Ferrule Systems, for coupling capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 1/16inchID, Use w/ 1/8inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 1/16inchID, Use w/ 1/4inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 1/8inchID, Use w/ 1/4inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 1.2mmID, Use w/ 1/8inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 0.8mmID, Use w/ 1/8inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 1.0mmID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for Glass, Stainless Steel Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%Graphite), 1/16inchID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for Glass, Stainless Steel Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front & Back Ferrule (OGF, 100%SGE GC Ferrule Graphite), Use w/ Swagelok, ParkerHannifin or SGE long style (SSNE) nuts, for capillary Column, 4-06 10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 5/16inchID, Use w/ 1/4inch Swagelok or SGE short style (SSN) nuts, for Capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 3/8inchID, Use w/ 3/8inch Swagelok or SGE short style (SSN) nuts, for capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 1/2inchID, Use w/ 1/2inch Swagelok or SGE short style (SSN) nuts, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 1.2mmID, Use w/ 1/8inch Swagelok or SGE short style (SSN) nuts, Easy to use, Long lifetime, Temp450C, for Fused Silica, Glass, Stainless Steel, LT Column, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 0.8mmID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for 0.1-0.32mmID Capillary Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 1.2mmID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for LT, Stainless Steel Column, Temp450C, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Grafite) Straight Ferrule, 5mmID. Easy to use, Long lifetime, Temp450C, Forms Soft grip on Column, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 1/4inch Fittings, 6mmID. Easy to USE, Long lifetime, Temp450C, Forms Soft grip on Column, Reusable.10PK

SGE GC Ferrule. Graphite Front Ferrule (GFF, 100%Graphite), 1/16inchID, Use w/ 1/16inch Swagelok or SGE short style (SSN) nuts, Agilent (HP), Varian SGE GC Ferrule Systems, for LT, Stainless Steel Column, Temp450C, Reusable.10PK

SGE GC O-Ring. Graphite O-rings-1/4 (0.635mm)ID

SGE Fused Silica Tubing. Deactivated (Phenyl) fused silica tubing - 220 micron (0.220mm) ID- 320 (0.320mm) micron OD - 10 meters

SGE Fused Silica Tubing. Deactivated (Phenyl) fused silica tubing - 250 micron (0.250mm) ID- 350 (0.350mm) micron OD - 10 meters

SGE Fused Silica Tubing. Deactivated (Phenyl) fused silica tubing - 250 micron (0.250mm) ID- 350 (0.350mm) micron OD - 5 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 250 micron (0.250mm) ID- 350 (0.350mm) micron OD - 5 meters-Pack of 5

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 530 micron (0.530mm) ID- 680 (0.680mm) micron OD - 10 meters

SGE Fused Silica Tubing. uL Phor-Sil High Perform. Capillary Electrophoresis Tubing, Polyimide Coated, 100umID x 360umOD x 100cuLN, Untreated, Mod. polar, for Field coating.

SGE Fused Silica Tubing. uL Phor-Sil High Perform. Capillary Electrophoresis Tubing, Polyimide Coated, 75umID x 360umOD x 100cuLN, Untreated, Mod. polar, for Field coating.

SGE Fused Silica Tubing. uL Phor-Sil High Perform. Capillary Electrophoresis Tubing, Polyimide Coated, 50umID x 360umOD x 100cuLN, Untreated, Mod. polar, for Field coating.

SGE Fused Silica Tubing. uL Phor-Sil High Perform. Capillary Electrophoresis Tubing, Polyimide Coated, 30umID x 360umOD x 100cuLN, Untreated, Mod. polar, for Field coating.

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) -250 micron (0.250mm) ID- 350 micron (0.350mm) OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 530 micron (0.530mm) ID- 680 micron (0.680mm) OD - 25 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 530 micron (0.530mm) ID- 680 micron (0.680mm) OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 320 micron (0.320mm) ID- 430 micron (0.430mm) OD - 25 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 320 micron (0.320mm) ID- 430 micron (0.430mm) OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 220 micron (0.220mm) ID- 320 micron (0.320mm) OD - 25 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 150 micron (0.150mm) ID- 285 (0.285mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 150 micron (0.150mm) ID- 220 (0.220mm) micron OD - 25 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 150 micron (0.150mm) ID- 220 (0.220mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 100 micron (0.100mm) ID- 360 (0.360mm) micron OD - 25 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 100 micron (0.100mm) ID- 360 (0.360mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 100 micron (0.100mm) ID- 200 (0.200mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 75 micron (0.075mm) ID- 190 (0.190mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 60 micron (0.060mm) ID- 220 (0.220mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 50 micron (0.050mm) ID- 150 (0.150mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 40 micron (0.040mm) ID- 140 (0.140mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 25 micron (0.025mm) ID- 150 (0.150mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 25 micron (0.025mm) ID- 285 (0.285mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 10 micron (0.010mm) ID- 285 (0.285mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 110 micron (0.110mm) ID- 170 (0.170mm) micron OD - 25 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 5 micron (0.005mm) ID- 285 (0.285mm) micron OD - 10 meters

SGE Fused Silica Tubing. Polyimide coated fused silica tubing (not deactivated) - 110 micron (0.110mm) ID- 170 (0.170mm) micron OD - 10 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 530 micron (0.530mm) ID- 680 (0.680mm) micron OD - 5 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 220 micron (0.220mm) ID- 320 (0.320mm) micron OD - 10 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 320 micron (0.320mm) ID- 430 (0.430mm) micron OD - 10 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 150 micron (0.150mm) ID- 320 (0.320mm) micron OD - 5 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 220 micron (0.220mm) ID- 320 (0.320mm) micron OD - 25 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 320 micron (0.320mm) ID- 430 (0.430mm) micron OD - 5 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 150 micron (0.150mm) ID- 220 (0.220mm) micron OD - 10 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 150 micron (0.150mm) ID- 220 (0.220mm) micron OD - 5 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 110 micron (0.110mm) ID- 320 (0.320mm) micron OD - 2 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 100 micron (0.100mm) ID- 360 (0.360mm) micron OD - 25 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 75 micron (0.075mm) ID- 190 (0.190mm) micron OD - 2 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 60 micron (0.060mm) ID- 220 (0.220mm) micron OD - 2 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 50 micron (0.050mm) ID- 220 (0.220mm) micron OD - 2 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 250 micron (0.25mm) ID- 350 (0.350mm) micron OD - 10 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 250 micron (0.25mm) ID- 350 (0.350mm) micron OD - 5 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 250 micron (0.25mm) ID- 350 (0.350mm) micron OD - 2 meters

SGE Fused Silica Tubing. Deactivated (Methyl) fused silica tubing - 25 micron (0.025mm) ID- 285 (0.285mm) micron OD - 2 meters

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Carbopack C (60/80 mesh)/Carbopack B (60/80 mesh)/Carbosieve SIII (60/80 mesh), Type: Unconditioned, Material: Stainless Steel, Use corrosion-resistant glass tubes for excellent inertness

Holster and Belt for Aura Personal Air Sampler.

TOCan Canister 3L. TO Air Sampling Canister, Modification: without Valve, Optimized for Methods TO-14A, TO-15, IP-1A, ASTM D5466, OSHA PV 2120, and NJ DEP Low Level TO-15, made of 304 and 316 stainless steel to withstand the rigors of field work, High-quality, metal-to-metal seal, Volume: 3L

Air Canister Tripod 6-9ft. Air Canister Tripod, Lightweight (12 lb) and compact for easy storage and transport, Extends from 6 to 9ft high, Large base provides enhanced stability without additional supports, Sturdy, rugged metal design for outdoor sampling, Holds two 1L, 3L, or 6L size canisters

TO-Can Air Sampling Canister 3L. TO-Can Air Sampling Canister, with Swagelok SS4H Bellows Valve, High quality, Bellows-design valve, Proprietary electropolished surface that maintains compound stability, Volume: 3L

TOCan Canister 6L. TO Air Sampling Canister, Modification: without Valve, Optimized for Methods TO-14A, TO-15, IP-1A, ASTM D5466, OSHA PV 2120, and NJ DEP Low Level TO-15, made of 304 and 316 stainless steel to withstand the rigors of field work, High-quality, metal-to-metal seal, Volume: 6L

TOCan Canister 1L. TO Air Sampling Canister, Modification: without Valve, Optimized for Methods TO-14A, TO-15, IP-1A, ASTM D5466, OSHA PV 2120, and NJ DEP Low Level TO-15, made of 304 and 316 stainless steel to withstand the rigors of field work, High-quality, metal-to-metal seal, Volume: 1L

AuraPersonal Air Sampler Kit. Aura8 Personal Air Sampler Kit, Material: Electropolished, Includes: 400cc miniature canister with 1/4in quick-connect stem, quick-connect body, holster and belt, Of disposable 8-hour sampler lines, tubing cutter, & lapel clip, features robust sampler, Green technology

Calibration Solution Loading Rig for Thermal Desorption Calibration Tube.

Raw Polyurethane Foam Large (PUF) Plug. Raw Polyurethane Foam Large (PUF) Plug, Flame retardant free-making them easier to clean for trace analysis, Compliant with EPA and ASTM methods-0.022 g/cm3 density, Size: 6 cm OD x 2.5 cm length, Unwashed PUF plugs for both low-volume

Raw Polyurethane Foam Large (PUF) Plug. Raw Polyurethane Foam Large (PUF) Plug, Flame retardant free-making them easier to clean for trace analysis, Compliant with EPA and ASTM methods-0.022 g/cm3 density, Size: 6 cm OD x 5.1 cm length, Unwashed PUF plugs for both low-volume

Raw Polyurethane Foam Large (PUF) Plug. Raw Polyurethane Foam Large (PUF) Plug, Flame retardant free-making them easier to clean for trace analysis, Compliant with EPA and ASTM methods-0.022 g/cm3 density, Size: 6 cm OD x 7.6 cm length, Unwashed PUF plugs for both low-volume

Ashcroft Test Gauge 6in. Ashcroft Test Gauge, Analog, Diameter: 6in, Fittings: 1/4in NPT, Accurate measurement of vacuum to -30in Hg and pressure to 60 psi, Accuracy to +/- 0.25%, operates on 2 AAA batteries, unambiguous readout, for verifying vacuum/pressure in canisters before/after sampling

RAVE Diaphragm Rebuild Kit, Material: Siltek-Treated, Includes:diaphragms (3), Features: Durable design to exceed 15,000 cycles, helium leak-tested to 1x10 raised to -6 mL/sec, easily finger-turn to achieve full valve closure, W-type valve seats are work-hardened

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax TA (35/60 mesh), Type: Conditioned & Capped, Material: Glass, Individually etched with unique serial number for convenient sample identification

Passive Air Sampling Kit-Soil Gas, Flow Capacity: 150 mL/min, Orifice Size: 0.0055in, Material: Siltek-Treated, 1 1/2in vacuum gauge (-30in Hg to 0in Hg), 2 um frit filter for insertion into 1/4in compression sample inlet

SilcoCan Canister 3L. SilcoCan Air Sampling Canister, Modification: without Valve, made of 304 and 316 stainless steel to withstand the rigors of field work, Ideal for low-level reactive sulfur (5-20 ppb), TO-14A, or TO-15 compounds, High-quality, metal-to-metal seal, Volume: 3L

Personal Sample Inlet, includes: 3 feet x 1/16in OD PTFE tubing, Clip, PTFE Reducing Ferrule, 1/4in SS nut, Convenient clip can be moved along length of tubing for proper attachment in breathing zone, PTFE reducing ferrule allows direct connection without another fitting

CapLok Tool for Thermal Desorption Unit Tubes, Use for tightening long-term storage caps.

TOCan Canister 15L. TO Air Sampling Canister, Modification: without Valve, Optimized for Methods TO-14A, TO-15, IP-1A, ASTM D5466, OSHA PV 2120, and NJ DEP Low Level TO-15, made of 304 and 316 stainless steel to withstand the rigors of field work, High-quality, metal-to-metal seal, Volume: 15L

Filter Replacement with 2 um Frit for Aura Personal Air Samplers.

Replacement Orifices 80-340 mL/min. Replacement Orifices, Flow Capacity: 80-340 mL/min, Orifice Size: 0.0090in, Material: Stainless Steel, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times

Passive Air Sampling Kit-Soil Gas, Flow Capacity: 210 mL/min, Orifice Size: 0.0065in, Material: Stainless Steel, 1 1/2in vacuum gauge (-30in Hg to 0in Hg), 2 um frit filter for insertion into 1/4in compression sample inlet

Vacuum Bag Sampler Model 1062, Includes: power adaptor, battery, manual, Fast bag sampling without sample passing through pump, capacity: 10 L

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Carbopack B (60/80 mesh)/Carbosieve SIII (60/80 mesh), Type: Conditioned & Capped, Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 150 mL/min, Orifice Size: 0.0055in, Material: Siltek-Treated, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax TA (35/60 mesh)/Graphitized Carbon (40/60 mesh)/Carboxen 1000 (60/80 mesh), Type: Conditioned & Capped, Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Frit replacement for Aura Personal Air Sampler, 2 um.

SilcoCan Canister 6L. SilcoCan Air Sampling Canister, Modification: without Valve, made of 304 and 316 stainless steel to withstand the rigors of field work, Ideal for low-level reactive sulfur (5-20 ppb), TO-14A, or TO-15 compounds, High-quality, metal-to-metal seal, Volume: 6L

SilcoCan Canister 1L. SilcoCan Air Sampling Canister, Modification: without Valve, made of 304 and 316 stainless steel to withstand the rigors of field work, Ideal for low-level reactive sulfur (5-20 ppb), TO-14A, or TO-15 compounds, High-quality, metal-to-metal seal, Volume: 1L

Replacement Orifices 80-340 mL/min. Replacement Orifices, Flow Capacity: 80-340 mL/min, Orifice Size: 0.0090in, Material: Siltek Treated, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax TA (35/60 mesh), Type: Unconditioned, Material: Stainless Steel, Use corrosion-resistant glass tubes for excellent inertness; allow monitoring of sorbent bed condition, Individually etched

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0130in, Material: Stainless Steel, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0090in, Material: Stainless Steel, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0080in, Material: Stainless Steel, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0055in, Material: Stainless Steel, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0040in, Material: Stainless Steel, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0030in, Material: Stainless Steel, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0020in, Material: Stainless Steel, Includes fitting and orifice

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 19 mL/min, Orifice Size: 0.0020in, Material: Siltek-Treated

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 80 mL/min, Orifice Size: 0.0040in, Material: Siltek-Treated

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Carbopack B (60/80 mesh)/Carbosieve SIII (60/80 mesh), Type: Unconditioned, Material: Glass, Use corrosion-resistant glass tubes for excellent inertness; allow monitoring of sorbent bed condition

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Carbopack B (60/80 mesh)/Carbosieve SIII (60/80 mesh), Type: Conditioned & Capped, Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Sample Cylinder Valve Stainless steel, 1/4in NPT x 1/4in NPT with Dip Tube 1-1/2 inches.

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 6 mL/min, Orifice Size: 0.0014in, Material: Stainless Steel

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 150 mL/min, Orifice Size: 0.0055in, Material: Siltek-Treated

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 210 mL/min, Orifice Size: 0.0065in, Material: Siltek-Treated

Canister Carrying Box Kit, with plastic handles simplify canister transport.

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax TA (35/60 mesh)/Graphitized Carbon (40/60 mesh)/Carboxen 1000 (60/80 mesh), Type: Unconditioned, Material: Glass, Use corrosion-resistant glass tubes for excellent inertness

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 150 mL/min, Orifice Size: 0.0055in, Material: Stainless Steel

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 210 mL/min, Orifice Size: 0.0065in, Material: Stainless Steel

Vacuum Gauge 1 1/2in. Vacuum Gauge, Diameter:1 1/2in, Fittings:1/8in NPT, with 316 stainless steel wetted surfaces, -30in Hg to 0in Hg, Recommended for use with passive sampling kits, rear mount

ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 5 L, Size: 12in x 12in, Very low VOC and sulfur background, Durable PVDF film is resistant to abrasion and chemicals, Contain no additives, fillers, or pigment

Replacement Frit for Grab Sampling Kit, Material: Siltek-Treated, 10 um.

Air Liquide Single Stage VOC Regulator, Fittings: CGA-180 (0-30 psig), Material: Stainless Steel, Features: Single-stage, Two pressure gauges, Stainless steel diaphragm and Kel-F seat, Accurate pressure control even at low flow rates, Individually tested

Sampling Belt, Mini-Can Accessories, Adjustable up to 50in, Straps slide anywhere on belt, Versatile design, perfect for personal wear or hang for area sampling, Two reclosable hook-and-loop straps securely hold mini-can or other sampling device

Miniature Air Sampling Kit 2 - 4 mL/min. Miniature Air Sampling Kit, Flow Capacity: 2 - 4 mL/min, Orifice Size: 0.0012in, Material: SS, Convenient smaller size connects easily to miniature canisters, Includes: flow controller, critical orifice, 2 um frit filter, vacuum gauge, and sample inlet

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax GR (35/60 mesh)/Carbopack B (60/80 mesh), Type: Conditioned & Capped, Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 1000 mL/min, Orifice Size: 0.0130in, Material: Stainless Steel, For 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 390 mL/min, Orifice Size: 0.0090in, Material: Stainless Steel, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 300 mL/min, Orifice Size: 0.0080in, Material: Stainless Steel, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 150 mL/min, Orifice Size: 0.0055in, Material: Stainless Steel, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Universal Battery Charger for Vacuum Bag Sampler Model 1062 (115/230 VAC).

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 6 mL/min, Orifice Size: 0.0014in, Material: Siltek-Treated

Replacement Quick-Connect Body with 1/4in Adaptor for Aura Personal Air Sampler, 1/8inch.

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax GR (35/60 mesh)/Carbopack B (60/80 mesh), Type: Conditioned & Capped, Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Veriflo Flow Controllers 80-340 mL/min. Veriflo Flow Controllers, Flow Capacity: 80-340 mL/min, Orifice Size:0.0090in, Material: Siltek-Treated, critical orifice in a Veriflo flow controller is interchangeable

Multi-Layer Foil Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 1 L, Size: 12in x 22in, Chemically inert with light and moisture protection, Continous sampling temperature up to 190 deg F (88 deg C), Composition: 5-layer

Multi-Layer Foil Gas Sampling Bag, Modification:Polypropylene Combo Valve and Septum, Volume: 12 L, Size: 13in x 24in, Chemically inert with light and moisture protection, Not recommended for low ppm VOCs due to background levels, Protective 5-layer barrier

Multi-Layer Foil Gas Sampling Bag, Modification:Polypropylene Combo Valve and Septum, Volume: 40 L, Size: 24in x 24.5in, Chemically inert with light and moisture protection, Not recommended for low ppm VOCs due to background levels, Protective 5-layer barrier

Miniature Air Sampling Kit 8 - 15 mL/min. Miniature Air Sampling Kit, Flow Capacity: 8 - 15 mL/min, Orifice Size: 0.0020in, Material: Siltek-Treated, Convenient smaller size connects to miniature canisters, Includes: flow controller, critical orifice, 2 um frit filter, vacuum gauge, and sample inlet

Miniature Air Sampling Kit 4 - 8 mL/min. Miniature Air Sampling Kit, Flow Capacity: 4 - 8 mL/min, Orifice Size: 0.0016in, Material: Siltek-Treated, Convenient smaller size connects to miniature canisters, Includes: flow controller, critical orifice, 2 um frit filter, vacuum gauge, and sample inlet

Miniature Air Sampling Kit 0.5-2 mL/min. Miniature Air Sampling Kit, Flow Capacity: 0.5-2 mL/min, Orifice Size: 0.0008in, Material: Siltek-Treated, Convenient smaller size connects to miniature canisters, Includes: flow controller, critical orifice, 2 um frit filter, vacuum gauge, and sample inlet

Passive Air Sampling Kit 80-340 mL/min. Passive Air Sampling Kit, Integrated, Flow Capacity: 80-340 mL/min, Orifice Size: 0.0090in, Material: Siltek-Treated, Superior Performance, Excellent for sampling times from 0.5 hour to 125 hours, Provide accurate integrated sampling without a sampling pump

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Carbopack C (60/80 mesh)/Carbopack B (60/80 mesh)/Carbosieve SIII (60/80 mesh), Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Cleaned Polyurethane Foam (PUF) Cartridge. Cleaned Polyurethane Foam, Large (PUF) Cartridge, Use for collection of semivolatiles (pesticides, PCBs, PAHs), Suitable for ambient, indoor, and industrial hygiene applications, 65 mm OD x 125 mm length, 75 mm

TO-Can Air Sampling Canister 6L. TO-Can Air Sampling Canister, with Swagelok SS4H Bellows Valve, High quality, Bellows-design valve, Proprietary electropolished surface that maintains compound stability, Volume: 6L

TO-Can Air Sampling Canister 1L. TO-Can Air Sampling Canister, with Swagelok SS4H Bellows Valve, High quality, Bellows-design valve, Proprietary electropolished surface that maintains compound stability, Volume: 1 L

Dual Canister Sampling Manifold, Precise dimension: (9.5in w x 3.5in h) provide accurate splitting of sample between two canisters, Material: Stainless Steel, Uses 1/4in compression connection, with Thick-walled stainless steel tubing rugged enough for field use

Replacement Frit for Grab Sampling Kit, Material: Stainless Steel, 10 um.

TO-Can Air Sampling Canister 15L. TO-Can Air Sampling Canister, with Swagelok SS4H Bellows Valve, High quality, Bellows-design valve, Proprietary electropolished surface that maintains compound stability, Volume: 15L

MTS-32 TD Multiple Tube Sequential Sampler, Allows sampling up to 32 thermal desorption tubes, diffusion-locking technology prevents sample loss, portable, Quality construction made of low-outgassing materials, include built-in fan, 110-240V power/battery

Lapel Clip, Metal with Card Clamp for Aura Personal Air Samplers.

Dual Canister Sampling Manifold, Precise dimension: (9.5in w x 3.5in h) provide accurate splitting of sample between two canisters, Material: Siltek-Treated, Uses 1/4in compression connection, with Thick-walled stainless steel tubing rugged enough for field use

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 20 mL/min, Orifice Size: 0.0020in, Material: Siltek-Treated, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Thermal Desorption Unit Tube, Empty tubes for direct desorption of VOCs from liquids, solids, or pastes, Material: Stainless Steel, front sorbent-retaining gauze, rear gauze, and gauze retaining spring, Empty tubes for direct desorption of VOCs from liquids

Cartridge 7.6 cm. Cartridge, Cleaned Polyurethane Foam (PUF), plug, Length: 7.6 cm, Diameter: 6 cm, for collection of semivolatiles (pesticides, PCBs, PAHs), with large high volume (220-280 L/min), small low-volume (1-5 L/min) PUF, Suitable for ambient, indoor, and industrial hygiene applications

Aura Personal Air Sampler (Disposable 8-Hour Sampler Line).

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 19 mL/min, Orifice Size: 0.0020in, Material: Stainless Steel

Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 80 mL/min, Orifice Size: 0.0040in, Material: Stainless Steel

Cleaned Polyurethane Foam (PUF) Cartridge. Cleaned Polyurethane Foam, Large (PUF)/XAD Cartridge, Use for collection of semivolatiles (pesticides, PCBs, PAHs), Suitable for ambient, indoor, and industrial hygiene applications, PUF/10 g XAD-2/50 mm PUF, 65 mm OD x 125 mm length, 25 mm

Gauge Connector to Canister Valve. Ashcroft Gauge Connector to Canister Valve, stainless steel, connects 1/4in male NPT to 1/4in male compression fitting

Ashcroft Test Gauge 3in. Ashcroft Test Gauge, Type: Digital, Diameter: 3 in, Fittings: 1/4 in NPT, Accurate measurement of vacuum to -30in Hg and pressure to 60 psi, Accuracy to +/- 0.25%, operates on two AAA batteries, for verifying the vacuum/pressure in canisters before and after sampling

RAVE Diaphragm Rebuild Kit, Material:Stainless Steel, Includes:diaphragms (3), Features: Durable design to exceed 15,000 cycles, helium leak-tested to 1x10 raised to -6 mL/sec, easily finger-turn to achieve full valve closure, W-type valve seats are work-hardened

Miniature Air Sampling Kit 4 - 8 mL/min. Miniature Air Sampling Kit, Flow Capacity: 4 - 8 mL/min, Orifice Size: 0.0016in, Material: SS, Convenient smaller size connects easily to miniature canisters, Includes: flow controller, critical orifice, 2 um frit filter, vacuum gauge, and sample inlet

Miniature Air Sampling Kit 0.5-2 mL/min. Miniature Air Sampling Kit, Flow Capacity: 0.5-2 mL/min, Orifice Size: 0.0008in, Material: SS, Convenient smaller size connects easily to miniature canisters, Includes: flow controller, critical orifice, 2 um frit filter, vacuum gauge, and sample inlet

Canister Air Sampling Timer, Program up to 12 timed events, with manual and automated operation, for either grab/time-integrated sampling, with Long battery life, recharges using USB port on any PC, stainless steel sample flow path ensures inertness, improving accuracy.

Miniature Canister 400cc. Miniature Canister, Modification:without Valve, Material:Electropolished Stainless Steel,Volume:400 cc,Ideal for indoor air, personal, emergency response, or soil gas sampling, Dimensions: 7 x 13.6 cm

Soil Gas Sampler Replacement Tee 30 mL/min. Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 30 mL/minute for 3hour, Orifice Size: 0.0025in, Material: Stainless Steel

AuraPersonal Air Sampler Kit. Aura8 Personal Air Sampler Kit, Material: Siltek-Treated, Includes: 400 cc miniature canister with 1/4in quick-connect stem, quick-connect body, holster and belt, Of disposable 8-hour sampler lines, tubing cutter, & lapel clip, features robust sampler, Green technology

Stainless Steel Union 1/4in and PTFE Ferrules for Thermal Desorption Unit Tube, Benefits and Uses: Use for connecting tubes in series.

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Graphitized Carbon (20/40 mesh), Type: Unconditioned, Material: Glass, Use corrosion-resistant glass tubes for excellent inertness; allow monitoring of sorbent bed condition, Individually etched

Deluxe Canister Carrying Case, Heavy-duty, all-aluminum design fits two 6 L SilcoCan or TO-Can canisters tightly without foam, Weight: 9 lb, Inside dimensions: length 18in, width 9 1/8in, height 12 1/2in,No organic contaminants from foam or plastics

Brass Cap 1/4in and PTFE Ferrule for Thermal Desorption Unit Tubes, Benefits and Uses: Long-term storage of blank/sampled tube

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0130in, Material: Siltek-Treated, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0090in, Material: Siltek-Treated, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0080in, Material: Siltek-Treated, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0055in, Material: Siltek-Treated, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0040in, Material: Siltek-Treated, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0030in, Material: Siltek-Treated, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0020in, Material: Siltek-Treated, Includes fitting and orifice

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0018in, Material: Siltek-Treated, Includes fitting and orifice

Soil Gas Sampling Kit, Flow Capacity: 30 mL/min, Material: Stainless Steel, Orifice Size: 0.0025in, Includes: Tee with orifice for sampling from 4 minutes to 10 hours, 1-1/2in vacuum gauge (-30 to 0 in Hg), 2 um frit filter for insertion into 1/4in compression sample inlet

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Graphitized Carbon (20/40 mesh), Type: Conditioned & Capped, Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Sample Inlet 6in. Sample Inlet, Material: Stainless Steel, Length: 6in, with 1/4in SS compression fitting on each end, One end connects to flow controller or canister, nut on other end serves as rain guard, Includes nuts and ferrules, with Two different lengths for large/miniature canisters

Aura Personal Air Sampler (Disposable 8-Hour Sampler Line).

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax TA (35/60 mesh), Type: Unconditioned, Material: Glass, Use corrosion-resistant glass tubes for excellent inertness; allow monitoring of sorbent bed condition, Individually etched

Belt Extension for Aura Personal Air Sampler, Length: adjustable, 12-24in (30.5-61 cm).

Thermal Desorption Unit Tube, Empty tubes for direct desorption of VOCs from liquids, solids, or pastes, Material: Glass, glass frit positioned 15 mm from sampling end, Empty tubes for direct desorption of VOCs from liquids

Passive Air Sampling Kit-Soil Gas, Flow Capacity: 80 mL/min, Orifice Size: 0.0040in, Material: Stainless Steel, 1 1/2in vacuum gauge (-30in Hg to 0in Hg), 2 um frit filter for insertion into 1/4in compression sample inlet

Small Cylinder Stand 6.5in. Small Cylinder Stand, Supports and stabilizes disposable gas cylinders, Fits cylinders up to 3 3/8in in diameter, Adjustable screw secures cylinder in place, Base diameter: 7.75in, Total height: 6.5in

ALTEF Gas Sampling Bag 13in x 24in. ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, 1 eyelet, Volume: 12 L, Size: 13in x 24in, Composition: proprietary PVDF film, Thickness: 0.003in, Tensile Strength: 6,100 psi, Temperature: 150 deg C (Max), Specific Gravity: 1.78 g/mL

ALTEF Gas Sampling Bag 28in x 36in. ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, 1 eyelet, Volume: 100 L, Size: 28in x 36in, Composition: proprietary PVDF film, Thickness: 0.003in, Tensile Strength: 6100 psi, Temperature: 150 deg C (Max), Specific Gravity: 1.78 g/mL

ALTEF Gas Sampling Bag 24in x 24.25in. ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, 1 eyelet, Volume: 40 L, Size: 24x24.25in, Composition: proprietary PVDF, film Thickness: 0.003in, Tensile Strength: 6,100 psi, Temperature: 150 deg C (Max), Specific Gravity: 1.78 g/mL

ALTEF Gas Sampling Bag 28.25in x 30.5in. ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, 1 eyelet, Volume: 80 L, Size: 28.25x30.5in, Composition: proprietary PVDF film Thickness: 0.003in, Tensile Strength: 6100psi, Temperature: 150 deg C(Max), Specific Gravity: 1.78 g/mL

Passive Air Sampling Kit-Soil Gas, Flow Capacity: 19mL/min, Orifice Size: 0.0020in, Material: Stainless Steel, 1 1/2in vacuum gauge (-30in Hg to 0in Hg), 2 um frit filter for insertion into 1/4in compression sample inlet

Passive Air Sampling Kit-Soil Gas, Flow Capacity: 6 mL/min, Orifice Size: 0.0014in, Material: Stainless Steel, 1 1/2in vacuum gauge (-30in Hg to 0in Hg), 2 um frit filter for insertion into 1/4in compression sample inlet

ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 0.5 L, Size: 6in x 6in, Very low VOC and sulfur background, Durable PVDF film is resistant to abrasion and chemicals, Contain no additives, fillers, or pigment

Passive Air Sampling Kit-Soil Gas, Flow Capacity: 150 mL/min, Orifice Size: 0.0055in, Material: Stainless Steel, 1 1/2in vacuum gauge (-30in Hg to 0in Hg), 2 um frit filter for insertion into 1/4in compression sample inlet

Repair Kit, Includes: 1 on/off switch; 1 diaphragm; 1 spring; 2 valve plates; and 3 O-rings, For Chemker 300 Vacuum Pumps

Repair Kit, Includes: 1 on/off switch; 2 diaphragms; 2 springs; 4 valve plates; and 6 O-rings, for Chemker 410 Vacuum Pumps

Repair Kit, Includes: 1 on/off switch; 2 diaphragms; 2 springs; 4 valve plates; and 11 O-rings, for Chemker 400 Vacuum Pumps

TubeMate Tool for Thermal Desorption Unit Tubes, Benefits and Uses: Assists with tube packing.

Replacement Battery for Vacuum Bag Sampler Model 1062.

Thermal Desorption Unit Tube Stainless steel. Thermal Desorption Unit Tube, Calibration, Use corrosion-resistant glass tubes for excellent inertness; allow monitoring of sorbent bed condition, Each tube has an arrow indicating flow direction, Material: Glass

Pen Clip for Thermal Desorption Unit Tubes.

Miniature Canister 400cc. Miniature Canister, Modification:without Valve, Material:Siltek-Treated,Volume:400 cc,Ideal for indoor air, personal, emergency response, or soil gas sampling, Dimensions: 7 x 13.6 cm

Sample Inlet 6in. Sample Inlet, Material: Siltek-Treated, Length: 6in, with 1/4in SS compression fitting on each end, One end connects to flow controller or canister, nut on other end serves as rain guard, Includes nuts and ferrules, with Two different lengths for large/miniature canisters

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax GR (35/60 mesh)/Carbopack B (60/80 mesh), Type: Unconditioned, Material: Stainless Steel, Use corrosion-resistant glass tubes for excellent inertness; allow monitoring of sorbent bed condition

Mini-Can Stand, For Mini can, Collapsible for easy storage and transport, Two out of three legs move to accommodate uneven surfaces, Holds 2 3/4in diameter cans securely, Small footprintG12in diameter x 6.5in height

Air Liquide Single Stage VOC Regulator, Fittings: CGA-180 (0-100 psig), Material: Stainless Steel, Features: Single-stage, Two pressure gauges, Stainless steel diaphragm and Kel-F seat, Accurate pressure control even at low flow rates, Individually tested

Miniature Air Sampling Kit 8 - 15 mL/min. Miniature Air Sampling Kit, Flow Capacity: 8 - 15 mL/min, Orifice Size: 0.0020in, Material: SS, Convenient smaller size connects easily to miniature canisters, Includes: flow controller, critical orifice, 2 um frit filter, vacuum gauge, and sample inlet

Soil Gas Sampler Replacement Tee 30 mL/min. Soil Gas Sampler Replacement Tee with Orifice, Flow Capacity: 30 mL/minute for 3hour, Orifice Size: 0.0025in, Material: Siltek-Treated

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 45 mL/min, Orifice Size: 0.0030in, Material: Stainless Steel, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 20 mL/min, Orifice Size: 0.0020in, Material: Stainless Steel, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 15 mL/min, Orifice Size: 0.0018in, Material: Stainless Steel, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 80 mL/min, Orifice Size: 0.0040in, Material: Stainless Steel, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 1000 mL/min, Orifice Size: 0.0130in, Material: Siltek-Treated, For 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 390 mL/min, Orifice Size: 0.0090in, Material: Siltek-Treated, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 300 mL/min, Orifice Size: 0.0080in, Material: Siltek-Treated, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Veriflo Flow Controllers 80-340 mL/min. Veriflo Flow Controllers, Flow Capacity: 80-340 mL/min, Orifice Size:0.0090in, Material: Stainless Steel, critical orifice in a Veriflo flow controller is interchangeable

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax TA (35/60 mesh)/Graphitized Carbon (40/60 mesh)/Carboxen 1000 (60/80 mesh), Type: Conditioned & Capped, Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Passive Air Sampling Kit 80-340 mL/min. Passive Air Sampling Kit, Integrated, Flow Capacity: 80-340 mL/min, Orifice Size: 0.0090in, Material: Stainless Steel, Superior Performance, Excellent for sampling times from 0.5 hour to 125 hours, Provide accurate integrated sampling without a sampling pump

Multi-Layer Foil Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 1 L, Size: 7in x 7in, Chemically inert with light and moisture protection, Continous sampling temperature up to 190 deg F (88 deg C), Composition: 5-layer

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 80 mL/min, Orifice Size: 0.0040in, Material: Siltek-Treated, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 45 mL/min, Orifice Size: 0.0030in, Material: Siltek-Treated, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Grab Passive Air Sampling Kit. Grad Passive Air Sampling Kit, Flow Capacity: 15 mL/min, Orifice Size: 0.0018in, Material: Siltek-Treated, Use with 1, 3, 6 L canisters, Connect 1/4in compression fitting directly to canister valve inlet, Replaceable frit protects orifice and valve from particulates

Diffusion Caps for Thermal Desorption Unit Tubes, Benefits and Uses: Required for diffusive sampling with stainless steel tubes

SilcoCan Canister 15L. SilcoCan Air Sampling Canister, Modification: without Valve, made of 304 and 316 stainless steel to withstand the rigors of field work, Ideal for low-level reactive sulfur (5-20 ppb), TO-14A, or TO-15 compounds, High-quality, metal-to-metal seal, Volume: 15L

Frit replacement for Aura Personal Air Sampler, 2 um.

PTFE Ferrule 1/4in for Thermal Desorption Unit Tubes, Benefits and Uses: Long-term storage caps.

Replacement Fitting for Grab Sampling Kit, Orifice Size: 0.0018in, Material: Stainless Steel, Includes fitting and orifice

Conversion Kit, Includes 1 hex spanner no. 10; 1 hex spanner no. 12; 1 L-type hex Allen key no. 3; 1 L-type hex Allen key no. 5; and 1 moisture trap/vacuum regulator for Rocker series compressor, for Rocker 300/500 to 320/520 Vacuum Pumps

Weldment O-Rings, for EZ Twist Top Split/Splitless Injection Ports for Agilent GCs, size: 10 packs

Weldment Removal Tool, for EZ Twist Top Split/Splitless Injection Ports, Instrument: for Agilent 5890/6850/6890/7890 GCs, Weldment removal tool allows for quick removal of the hot weldment without fingers ever touching hot surfaces, stays secure for reattachment

Injection Port Assembly Kit, EZ Twist Top Split/Splitless, includes: Siltek split/splitless weldment, Siltek shell weldment, weldment O-rings (2), Siltek dual Vespel ring inlet seal, septum nut, reducing nut, stainless steel capillary nut, removal tool

Weldment, for EZ Twist Top Split/Splitless Injection Ports, Instrument: for Agilent 5890/6850/6890/7890 GCs, Material: Stainless Steel

Shell Weldment, for EZ Twist Top Split/Splitless Injection Ports, Material: Stainless Steel.

Heater Block, Instrument: for Agilent 6850/6890/7890 GC Split/Splitless Injector, Meets or exceeds original manufacturer's performance

Replacement ECD Fused Silica Liner, size: 5 pack.

Replacement Micro ECD Liner, size: 5 pack

Sparger, Modification: Fritted, 1/2-inch mount, Volume: 25 mL, Available with uniform frits to ensure maximum purging efficiency, Use non-fritted spargers for wastewater samples, Designed for use with Tekmar purge-and-trap instruments only, tight tolerances ensure a leak-tight seal

Sparger, Modification: NonFritted, 1/2-inch mount, Volume: 10 mL, Available with uniform frits to ensure maximum purging efficiency, Use non-fritted spargers for wastewater samples, Designed for use with Tekmar purge-and-trap instruments only, tight tolerances ensure a leak-tight seal

Sparger, Modification: Non-Fritted, 1/2-inch mount, Volume: 5 mL, Available with uniform frits to ensure maximum purging efficiency, Use non-fritted spargers for wastewater samples, Designed for use with Tekmar purge-and-trap instruments only, tight tolerances ensure a leak-tight seal

Sparger, Modification: Fritted, 1/2-inch mount, Volume: 10 mL, Available with uniform frits to ensure maximum purging efficiency, Use non-fritted spargers for wastewater samples, Designed for use with Tekmar purge-and-trap instruments only, tight tolerances ensure a leak-tight seal

Septa Holder Kit, Instrument: for Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL, Material: Silcosteel-AC-Treated, Includes septum support and holder, Made from high-quality stainless steel, Silcosteel-AC-treated version helps with septum removal

Septum Cap, Instrument: for Split/Splitless Injector on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL

Adaptor 2 pack. Adaptor, for Capillary Column on Detector Base, Instrument: for Thermo Scientific TRACE & Focus SSL, Uses: For use with M4 ferrules, Use same installation distance as manufacturer's adaptors, stainless steel, Siltek-treated version available for additional inertness, size: 2 pack

Adapter,for Capillary Column on Split/Splitless Injector, Instrument: for Thermo Scientific TRACE & Focus SSL, Benefits and Uses: For use with standard 1/16in -type ferrules, Made of high-quality stainless steel, Use same installation distance as manufacturer's adaptors

Adapter, for Capillary Column on Detector Base, Instrument: for Thermo Scientific TRACE & Focus SSL, Benefits and Uses: For use with standard 1/16in -type ferrules, Made of high-quality stainless steel, Use same installation distance as manufacturer's adaptors

Gold Tip Transfer Line, For use with Agilent 5971/5972 MS systems, Gold-plated for inertness, Meets or exceeds original manufacturer's performance

EPC Test Kit, for Agilent 6890 GCs, Kit includes three O-rings, two plugs, one mounting screw, and one test block

Ring Inlet Seal 50 pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Agilent GCs, ID: 0.8 mm, Material: Stainless Steel, Requires less torque to seal, Does not require a separate washer, Does not require retightening of reducing nut after several oven cycles, size: 50 pack

Ring Inlet Seal 50 pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Agilent GCs, ID: 0.8 mm, Material: Siltek-Treated, Requires less torque to seal, Does not require a separate washer, Does not require retightening of reducing nut after several oven cycles, size: 50 pack

Replacement Inlet Seal 50 pack. Replacement Inlet Seal, for Agilent GCs, Used with: Single-column, ID: 0.8 mm, Material: Stainless Steel, for Agilent GCs, Siltek treatment provides enhanced inertness versus stainless steel, All seals include washers, size: 50 pack

Replacement Inlet Seal 50 pack. Replacement Inlet Seal, for Agilent GCs, Used with: Single-column, ID: 0.8 mm, Material: Siltek-Treated, for Agilent GCs, Siltek treatment provides enhanced inertness versus stainless steel, All seals include washers, size: 50 pack

Ring Inlet Seal 10 pack. Ring Inlet Seal, Flip Seal Dual Vespel, ID: 1.2 mm, Material: Siltek-Deactivated, Reversible, two-sided design allows significantly more analyses, simply use, flip, ring embedded in top and bottom surface eliminates need for a washer, size: 10 pack

Ring Inlet Seal 2 pack. Ring Inlet Seal, Flip Seal Dual Vespel, ID: 1.2 mm, Material: Siltek-Deactivated, Reversible, two-sided design allows significantly more analyses, simply use, flip, ring embedded in top and bottom surface eliminates need for a washer, size: 2 pack

Ring Inlet Seal, Flip Seal, Dual Vespel, ID: 1.2 mm, Material: Gold-Plated, Reversible, two-sided design allows significantly more analyses than other seals, at the same priceGsimply use, flip, then use again, Very little torque required to make seal

Ring Inlet Seal, Flip Seal, Dual Vespel, Includes: gold-plated inlet seal, reducing nut adaptor, 1/16in SS nut, Vespel ring embedded in top and bottom surface eliminates need for a washer, Very little torque required to make sealGreduces operator variability

Weldment O-Ring 10 pack. High Temperature Weldment O-Ring, for Agilent 7890 GCs EZ Twist Top Split/Splitless Injection Port, size: 10 pack

FID Jet, Instrument: for Thermo Scientific TRACE & Focus GCs.

FID Replacement PartFID Body, Instrument: for PerkinElmer Auto SYS XL and Clarus 500, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance

FID Replacement Part, Instrument: for PerkinElmer Auto SYS XL and Clarus 500, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance

FID Replacement Part kit, Instrument: for PerkinElmer Auto SYS XL and Clarus 500, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance

FID Base Weldment, Instrument: for Agilent 6850/6890 GCs, Meets or exceeds original manufacturer's performance, Includes brass nut, Available for Agilent 5890, 6850, or 6890 GCs, not compatible with the 7890 EPC modules

FID Collector Housing Kit, Instrument: for Agilent 6890/7890 GCs, Includes: collector body, silicone washer, nut, and mount, Meets or exceeds original manufacturer's performance, Available for Agilent 5890, 6890, or 7890 GCs.

Replacement Parts for FID Collector Housing Kit, Instrument: for Agilent 6890/7890 GCs.

FID Collector Mount, Instrument: for Agilent 6890/7890 GCs, Meets or exceeds original manufacturer's performance, Available for Agilent 5890, 6890, or 7890 GCs

FID Base Weldment, Instrument: for Agilent 5890 GCs, Meets or exceeds original manufacturer's performance, Includes brass nut, Available for Agilent 5890, 6850, or 6890 GCs

FID Replacement Part, Instrument: for PerkinElmer Auto SYS XL and Clarus 500, Length: 64 mm, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance

FID Collector Housing Kit, Instrument: for Agilent 5890 GCs, Includes: collector body, spanner nut, and silicone washerGorder mount separately, Meets or exceeds original manufacturer's performance

FID Collector Mount, Instrument: for Agilent 5890 GCs, Meets or exceeds original manufacturer's performance, Available for Agilent 5890, 6890, or 7890 GCs

Gasket and Hardware Kit, Replacement Insulation, for Oven Flapper Assemblies, Instrument: for Agilent 5890/6890 GCs

Oven Flapper Assembly, Instrument: for Agilent 6890 GCs, Ensure even and consistent column heating when the insulation becomes damaged or worn, Replacement Insulation Gasket and Hardware Kit includes the insulation gasket, 2 screws and 2 nuts

Oven Flapper Assembly, Instrument: for Agilent 5890 GCs, Ensure even and consistent column heating when the insulation becomes damaged or worn, Insulation is replaceable, Replacement Insulation Gasket and Hardware Kit includes the insulation gasket, 2 screws and 2 nuts

Turret Tray Assembly, Instrument: for Agilent 7673 Autosamplers, Holds sample, waste, and solvent vials

Split/Splitless Injection Port, EZ Twist Top, for Agilent 6850/6890 GCs, Includes: Siltek split/splitless, shell, O-rings (2), Siltek dual Vespel ring inlet seal, septum nut, reducing nut, SS capillary nut for use with 1/16in ferrules, removal tool

Split/Splitless Injection Port, EZ Twist Top, for Agilent 6850/6890 GCs, Includes: split/splitless weldment, shell, O-rings (2), Siltek dual Vespel ring inlet seal, septum nut, reducing nut, SS capillary nut, removal tool

Optional Split/Splitless Shell Weldment injection ports, EZ Twist Top, Instrument: for Agilent 6850/6890 GCs (for use with large canister type filter), Material: Siltek-Treated

Optional Split/Splitless Shell Weldment injection ports, EZ Twist Top, Instrument: for Agilent 6850/6890 GCs (for use with large canister type filter), Material: Stainless Steel

Weldment, for EZ Twist Top Split/Splitless Injection Ports, Includes: (2 weldment O-rings are installed on the weldment), Instrument: for Agilent 5890/6850/6890/7890 GCs, Material: Siltek-Treated

Split/Splitless Injection Port, EZ Twist Top, Includes: Siltek split/splitless weldment, Siltek shell, O-rings (2), Siltek dual Vespel ring inlet seal, septum nut, reducing nut, SS capillary nut for use with 1/16in ferrules, and weldment removal tool

Split/Splitless Injection Port, EZ Twist Top, Includes: split/splitless weldment, shell, O-rings (2), Siltek dual Vespel ring inlet seal, septum nut, reducing nut, stainless steel capillary nut for use with 1/16in ferrules, and weldment removal tool

Extended Capillary Column Nut, Instrument: for Agilent 5890/6850/6890/7890 GCs, Benefits and Uses: for compact ferrules, Finger-tight design to allow wrench-free use, Available for standard (1/16in ) and compact (Agilent-style) ferrules, high-quality stainless steel

Extended Capillary Column Nut, Instrument: for Agilent 5890/6850/6890/7890 GCs, Benefits and Uses: for standard 1/16in ferrules,Available for standard (1/16in ) and compact (Agilent-style) ferrules, Meets or exceeds original manufacturer's performance

Extended Capillary Column Nut, Instrument: for Agilent 5890/6850/6890/7890 GCs, Finger-tight design to allow wrench-free use, Available for standard (1/16in ) and compact (Agilent-style) ferrules, Meets or exceeds original manufacturer's performance

Extended Capillary Column Nut, Includes: extended reducing nut and extended capillary column nut for compact ferrules, Instrument: for Agilent 5890/6850/6890/7890 GCs, Benefits and Uses: for compact ferrules, Finger-tight design to allow wrench-free use

Extended Capillary Column Nut, Includes: extended reducing nut and extended capillary column nut for standard 1/16in ferrules, Instrument: for Agilent 5890/6850/6890/7890 GCs, Benefits and Uses: for standard 1/16in ferrules, Finger-tight design

FID Jet, Wide Bore FID Jet, Instrument: for Shimadzu 2010 GCs, Length: 57mm, Meets or exceeds original manufacturer's performance

FID Jet, Instrument: for Shimadzu 2010 GCs, Length: 57 mm, Meets or exceeds original manufacturer's performance

Ferrule, for EZ No-Vent GC Column-MS Connectors, Replacement ferrules (aluminum) for connecting transfer line to EZ No-Vent Connector: 0.4 mm ID, Material: Aluminum

GC Column-Mass Spectrometer Connector, EZ No-Vent, Includes: connector, 0.4 mm ID polyimide adaptor ferrules for capillary column (2), 0.4 mm ID aluminum ferrules for transfer line (2), 100 um deactivated transfer line (3 ft), column plug, capillary nut

Replacement Parts for Micropacked Conversion Kit, Includes: Dual Vespel ring inlet seals, large bore (2)

Micropacked Column Adaptor Kit, Includes: FID adaptor, large bore; 1/4in ferrule, Vespel/graphite; 1/4in nut, stainless steel; 1/16in nut, SS; 1/16in ferrule, Vespel/graphite, Convert a capillary GC split/splitless inlet for use with 1/16in OD micropacked columns

Inlet Conversion Kit, Micropacked, Includes: dual Vespel ring inlet seal, large bore; reducing nut, large bore; 1/16in ferrule, Vespel/graphite; Siltek treated metal liner installation guide; 1/16in nut, stainless steel, Benefits and Uses: Injection Port Adaptor Kit

Inlet Conversion Kit, Micropacked, Includes: dual Vespel ring inlet seal, large bore; reducing nut, large bore; 1/16in ferrule, Vespel/graphite; 1/16in nut, stainless steel; 4 mm splitless liner, intermediate polarity deactivated, Uses: Injection Port Adaptor Kit

Inlet Conversion Kit, Micropacked, Includes: dual Vespel ring inlet seal, reducing nut, FID adaptor,1/4in ferrule, Vespel/graphite; 1/4in nut, 1/16in ferrules, Vespel/graphite (2); 4 mm splitless liner, intermediate polarity deactivated; 1/16in nuts

PTV Liner Seal Pre-Seat Tool, Instrument: for Gerstel CIS 3 and CIS 4 PTV Inlets.

PTV Inlet Adaptor Kit for 0.25 and 0.32 mm ID Columns, for Gerstel CIS 3 and CIS 4 PTV Inlets, Meets original manufacturer's performance. Includes inlet adaptor, silver PTV seal, and slotted capillary nut.

Capillary Column Nut, PTV Slotted, Instrument: for Gerstel CIS 3 and CIS 4 PTV Inlets.

Hot Swap Capillary Column Nut, No more burned fingers, No more downtime waiting for injector parts to cool down, Instrument: for Agilent GCs, Benefits and Uses: For use with standard 1/16in -type ferrules

Injector Nut Kit, Instrument: for Shimadzu 17A, 2010, and 2014 GCs, Material: Siltek-Treated, Includes 17A injector nut, 0.4 mm graphite ferrule, and 1/16-inch stainless steel capillary nut

Ring Inlet Seal 10 Pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Thermo TRACE 1300/1310 GCs, ID: 1.2mm, Material: Siltek-Treated, Does not require a separate washer, Requires less torque to seal, Does not require retightening of reducing nut after oven cycles, size: 10 Pack

Ring Inlet Seal 2 pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Thermo TRACE 1300/1310 GCs, ID: 1.2mm, Material: Siltek-Treated, Does not require a separate washer, Requires less torque to seal, Does not require retightening of reducing nut after oven cycles, size: 2 pack

Ring Inlet Seal 10 Pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Siltek-Treated, Does not require a separate washer, Requires less torque to seal, Does not require retightening of reducing nut after oven cycles, size: 10 Pack

Ring Inlet Seal 2 pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Siltek-Treated, Does not require a separate washer, Requires less torque to seal, Does not require retightening of reducing nut after oven cycles, size: 2 pack

Ring Inlet Seal 10 Pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Thermo TRACE 1300/1310 GCs, ID: 1.2 mm, Material: Gold-Plated, Does not require a separate washer, Requires less torque to seal, Does not require retightening of reducing nut after oven cycles, size: 10 Pack

Ring Inlet Seal 2 pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Thermo TRACE 1300/1310 GCs, ID: 1.2 mm, Material: Gold-Plated, Does not require a separate washer, Requires less torque to seal, Does not require retightening of reducing nut after oven cycles, size: 2 pack

Ring Inlet Seal 10 Pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Gold-Plated, Does not require a separate washer, Requires less torque to seal, Does not require retightening of reducing nut after oven cycles, size: 10 Pack

Ring Inlet Seal 2 pack. Ring Inlet Seal, Dual Vespel, Washerless, Leak-Tight Seals for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Gold-Plated, Does not require a separate washer, Requires less torque to seal, Does not require retightening of reducing nut after oven cycles, size: 2 pack

Cross-Disk Inlet Seal 10 Pack. Cross-Disk Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Siltek-Treated, All seals include washers, size: 10 Pack

Cross-Disk Inlet Seal 2 pack. Cross-Disk Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Siltek-Treated, All seals include washers, size: 2 pack

Replacement Inlet Seal 10 Pack. Replacement Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Siltek-Treated, Fits Column ID: Single-Column Installation, Siltek treatment provides inertness similar to fused silica, All seals include washers, size: 10 Pack

Replacement Inlet Seal 2 pack. Replacement Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Siltek-Treated, Fits Column ID: Single-Column Installation, Siltek treatment provides inertness similar to fused silica, All seals include washers, size: 2 pack

Cross-Disk Inlet Seal 10 Pack. Cross-Disk Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Gold-Plated, All seals include washers, size: 10 Pack

Cross-Disk Inlet Seal 2 pack. Cross-Disk Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Gold-Plated, All seals include washers, size: 2 pack

Replacement Inlet Seal 10 Pack. Replacement Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 1.2 mm, Material: Gold-Plated, Fits Column ID: 0.25/0.32 mm ID Dual-Column Installation, Siltek treatment provides inertness similar to fused silica, All seals include washers, size: 10 Pack

Replacement Inlet Seal 2 pack. Replacement Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 1.2 mm, Material: Gold-Plated, Fits Column ID: 0.25/0.32 mm ID Dual-Column Installation, Siltek treatment provides inertness similar to fused silica, All seals include washers, size: 2 pack

Replacement Inlet Seal 10 Pack. Replacement Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Gold-Plated, Fits Column ID: Single-Column Installation, Siltek treatment provides inertness similar to fused silica, All seals include washers, size: 10 Pack

Replacement Inlet Seal 2 pack. Replacement Inlet Seal, for Thermo TRACE 1300/1310 GCs, ID: 0.8 mm, Material: Gold-Plated, Fits Column ID: Single-Column Installation, Siltek treatment provides inertness similar to fused silica, All seals include washers, size: 2 pack

FID Maintenance Kit, include: 1/4in, 0.4, 0.5, and 0.8 mm ID graphite ferrule, FID/NPD capillary adaptor, Capillary nut, removers, 1/4in nut, Scoring wafer, cap, Ignitor, FID flow-measuring adaptor, wrench, Installation gauge, brush, FID jet, Spanner wrench, removal tool

Shell Weldment, for EZ Twist Top Split/Splitless Injection Ports, Material: Stainless Steel, Application: For agilent 7890 GCs

Shell Weldment, for EZ Twist Top Split/Splitless Injection Ports, Material: Stainless Steel, Application: For agilent 7890 GCs

Ring Cross-Disk Inlet Seal, Dual Vespel, for Agilent GCs, ID: 0.8 mm, Material: Siltek-Treated, Ideal for high-flow split applications 500 mL/min, Washerless, leak-tight seals

Ring Cross-Disk Inlet Seal, Dual Vespel, for Agilent GCs, ID: 0.8 mm, Material: Gold-Plated, Ideal for high-flow split applications 500 mL/min, Washerless, leak-tight seals

Ring Cross-Disk Inlet Seal, Dual Vespel, ID: 0.8 mm, Material: Gold-Plated, Ideal for high-flow split applications 500 mL/min, Washerless, leak-tight seals

Transfer Line Reducing Kit, for Thermo Scientific TRACE & Focus DSQ Mass Spectrometers, Meets or exceeds original manufacturer's performance

Septum Nut, for Shimadzu 17A, 2010, and 2014 GCs, One-piece design for ease of installation and removal, Made of clear anodized aluminum and high-quality stainless steel

FID Gauge Pack, for Agilent 5890 GCs, Pressure regulators and gauges for air and hydrogen, 1/8-inch bulkhead allows easy hookup to instrument, Rated for inlet pressures to 250 psi(1,724 kPa), Rated for outlet pressures of 0 to 60 psi(0G414 kPa)

Siltek Treated Adaptor, for Thermo Scientific TRACE & Focus SSL, for Capillary Column on Split/Splitless Injector, Made of high-quality stainless steel. For use with standard 1/16inch-type ferrules.

Merlin MicroShot Injector, Volume: 1.0 uL injection, NIST traceability assures accurate injections. Fixed volume reduces sampling error. Prevents bent syringe plungers. Saves timeGno need to transfer to autosampler vials.

Merlin MicroShot Injector, Volume: 0.5 uL injection, NIST traceability assures accurate injections. Fixed volume reduces sampling error. Prevents bent syringe plungers. Saves timeGno need to transfer to autosampler vials.

Merlin Microseal Septa, General Purpose Kit for Shimadzu GCs (3 to 100 psi), Includes: Nut, Adapter, O-Ring, & 2 General-Purpose ( no. 410) Microseals, Instrument: Shimadzu, Compatible with Shimadzu models GC-2010 and GC-2025 only. 450degC maximum injection port temperature.

Merlin Microseal Septa, General Purpose Kit for PerkinElmer GCs (3 to 100 psi), Includes: Nut, Adapter, O-Ring & 2 General-Purpose ( no. 410) Microseals, 400 deg C max injection port temperature. For PerkinElmer GCs

Merlin Microseal Septa kit. Merlin Microseal Septa, General Purpose Kit for Bruker/Varian 1078/1079 GCs, Includes: Nut, Adapter, O-Ring, & 1 General-Purpose ( no. 410) Microseal, for Bruker/Varian GCs, 400 deg C max injection port temperature.

Merlin MicroShot Injector, Volume: 2.0 uL injection, NIST traceability assures accurate injections. Fixed volume reduces sampling error. Prevents bent syringe plungers. Fixed volume reduces sampling error

Swagelok Fitting Kit, Material: Stainless Steel, Includes the most common assortment of 1/8inch and 1/4inch stainless steel fittings. Parts list makes reordering easy. Parts come in sturdy tool box for easy and convenient storage.

Union, Material: Siltek/Sulfinert-Treated, Size: 3/8inch.

Cylinder Holder, Wall Mounted, Size: Four, designed to prevent free-standing gas cylinders from tipping over and injuring personnel. The cast aluminum holder can be secured to a wall or the side of a work bench. Diameter: 4-15inch

Cylinder Holder, Wall Mounted, Size: Triple, designed to prevent free-standing gas cylinders from tipping over and injuring personnel. The cast aluminum holder can be secured to a wall or the side of a work bench. Diameter: 4-15inch

Cylinder Holder, Wall Mounted, Size: Double, designed to prevent free-standing gas cylinders from tipping over and injuring personnel. The cast aluminum holder can be secured to a wall or the side of a work bench. Diameter: 4-15inch

Plug Valve, Size: 1/4inch, Material: Stainless Steel, Shut-Off Gas Valve.

Plug Valve, Size: 1/8inch, Material: Stainless Steel, Shut-Off Gas Valve.

Ball Valve, Size: 1/4inch, Material: Stainless Steel, Shut-Off Gas Valve.

Toggle Valve, Size: 1/4inch, Material: Stainless steel, Shut-Off Gas Valve.

Toggle Valve, Size: 1/8inch, Material: Stainless steel, Shut-Off Gas Valve.

Plug Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve.

Plug Valve, Size: 1/8inch, Material: Brass, Shut-Off Gas Valve.

Ball Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve.

Plug, Material: Brass, Size: 1/8inch.

Plug, Material: Brass, Size: 1/16inch.

Click-On In-Line Super Clean Double Connector, Connects any Click-On trap to a Click-On indicator. Each double connector is 3inch (8 cm) in length.

Toggle Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve.

Cross, Material: Stainless Steel, Size: 1/4inch.

Plug, Material: Stainless Steel, Size: 1/4inch.

Super-Clean Click-on Trap Fuel Gas, Moisture and Hydrocarbons, measure: 8 1/2inch x 1 1/4inch

Swagelok Metering Gas Valve, Material: Stainless Steel, Size: 1/4inch.

Swagelok Metering Gas Valve, Material: Stainless Steel, Size: 1/8inch.

Tee, Material: Siltek/Sulfinert-Treated, Size: 3/8inch.

Tubing, Sulfinert 304SS Welded/Drawn. Tubing, Sulfinert Welded/Drawn, ID: 0.011inch, OD: 0.022inch, Material: 304 Grade Stainless Steel, Deactivation: Sulfinert Treated, Chromatography applications. Gas delivery systems, Lower pressures, Inert applications, Maximum temperature of 450 deg C

Tubing, Sulfinert 304SS Welded/Drawn. Tubing, Sulfinert Welded/Drawn, ID: 0.011inch, OD: 0.022inch, Material: 304 Grade Stainless Steel, Deactivation: Sulfinert Treated, Chromatography applications. Gas delivery systems, Lower pressures, Inert applications, Maximum temperature of 450 deg C

Click-On Big Trap Includes Wall-Mounting Clamp, Includes: (2) 1/4inch SS connectors, (1) oxygen/moisture/hydrocarbon helium-specific trap, and (2) wall-mounting clamps, Fittings: 1/4inch Stainless Steel, High-purity output ensures 99.9999% pure gas

Ultra-High-Purity Regulator, with International Fittings, Material: Stainless Steel, Type: Dual-Stage, Fittings: BS 341 no. 4 (He, Ar, Air, N2), Outlet Gauge: 30in, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig) Most stable outlet pressure control.

Ultra-High-Purity Regulator, with International Fittings, Material: Stainless Steel, Type: Dual-Stage, Fittings: BS 341 no. 3 (He, Ar, Air, N2), Outlet Gauge: 30in, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig) Most stable outlet pressure control.

Triple Helium Kit, Includes: (2) 1/8inch SS connectors, (1) oxygen/moisture/hydrocarbon helium-specific trap, and (2) wall-mounting clamps. Fittings: 1/8inch Stainless Steel, High-purity output ensures 99.9999% pure gas, Triple gas trap is ideal for purifying carrier gas.

Reducing Union, Material: Silcosteel-CR Treated, Size: 3/8inch to 1/4inch.

Tubing, Sulfinert 304SS Welded/Drawn Tubing, ID: 0.040inch, OD: 1/16inch, for Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Maximum temperature of 450 deg C in an inert atmosphere. 101FT

Tubing, Sulfinert 304SS Welded/Drawn Tubing, ID: 0.030inch, OD: 1/16inch, for Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Maximum temperature of 450 deg C in an inert atmosphere. 101FT

Tubing, Welded/Drawn 101FT. Tubing, Welded/Drawn, SULFINERT, ID: 0.020inch, OD: 1/16inch, Material: 304 Grade Stainless Steel, Chromatography applications. Gas delivery systems. Lower pressures, Inert application, Maximum temperature of 450 deg C in an inert atmosphere

FID Gas Station Annual Maintenance Kit, Includes: 1 desiccant cartridge, 1 resin cartridge, 1 inline filter, and 1 tube filter, for Parker Balston Model FID-1000 and FID-2500 Gas Stations

Port Connector, Size: 1/4inch, Material: Stainless Steel.

Port Connector, Size: 1/8inch, Material: Stainless Steel.

Front Ferrule, Size: 1/4inch, Material: Stainless Steel.

Particle Drop-In Filter, for use with Super-Clean Gas Filter for LC-MS, 0.5 um.

Tubing, Coiled 101 ft. Tubing, Coiled, ID: 0.277inch (7.04 mm), OD: 3/8inch (9.52 mm), Material: Seamless 316L Stainless Steel, Deactivation: Sulfinert Treated, Wall Thickness: 0.049inch, Applications: Inert applications, High temperatures. High pressures, Corrosive environments, Zero bleed

Hydroguard Deactivated Stainless Steel Tubing, Coiled, ID: 0.085in, OD: 1/8in, Material: 316L Stainless Steel, Electropolished, Deactivation: Silcosteel Treated, Hydroguard Deactivated, Wall Thickness: 0.020in, creates a high-density surface, 10FT

Welded/Drawn Tubing, ID: 0.010in, OD: 1/16in, Material: 304 Grade Stainless Steel, Deactivation: Sulfinert Treated, Chromatography applications, Gas delivery systems. Lower pressures, Inert applications, Maximum temperature of 450 deg C in an inert atmosphere.

Big Replacement Trap. Click-On In-Line Super Clean Big Replacement Trap, Type:Hydrocarbon Trap, Capacity: 360 g total hydrocarbons

Wall-Mounting Clamps for Click-On In-line Super Clean Gas Traps.

Ultra-High-Purity Regulator, Material:Chrome-Plated Brass, Type:Dual-Stage, Fittings:BS 341 no. 4 (He, Ar, Air, N2), Outlet Gauge:30in, 0 to 14 barOutlet Pressure:0 to 10 bar (0-150 psig), Oxidation-resistant, chrome-plated, Most stable outlet pressure control

Ultra-High-Purity Regulator, Material:Chrome-Plated Brass, Type:Dual-Stage, Fittings:BS 341 no. 3 (He, Ar, Air, N2), Outlet Gauge:30in, 0 to 14 barOutlet Pressure:0 to 10 bar (0-150 psig), Oxidation-resistant, chrome-plated, Most stable outlet pressure control

Swagelok Replacement O-Ring, 70 Durometer Fluorocarbon FKM, VCO 1/4in, Size 010, Material:Stainless Steel

Click-On In-line Super Clean Connector, Fittings:1/4in Brass, Length: 2 3/8in.

Click-On In-line Super Clean Ultra-High Capacity Oxygen Trap, Dimensions: 8 1/2in x 1 1/4in.

Ultra-High-Purity Regulator, Material:Chrome-Plated Brass, Type:Dual-Stage, Fittings:DIN 477 no. 9 (He, Ar), Outlet Gauge:30in, 0 to 14 bar (0-200 psig)Outlet Pressure:0 to 10 bar (0-150 psig), Oxidation-resistant, chrome-plated, Most stable outlet pressure control,

Ultra-High-Purity Regulator, Material:Chrome-Plated Brass, Type:Dual-Stage, Fittings:DIN 477 no. 1 (He, Ar), Outlet Gauge:30in, 0 to 14 bar (0-200 psig)Outlet Pressure:0 to 10 bar (0-150 psig), Oxidation-resistant, chrome-plated, Most stable outlet pressure control,

Tubing, Coiled1/4in (6.35 mm). Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, ID 0.180in (4.57 mm), OD: 1/4in, Wall Thickness: 0.035in, Forinert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 100 ft roll

Tubing, Coiled1/8in (3.18 mm). Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, ID 0.055in (1.40 mm), OD: 1/8in, Wall Thickness: 0.035in, Forinert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 100 ft roll

Purification Kit, Includes:(2) 1/8in SS connectors and (1) oxygen/moisture/hydrocarbon triple trap, Type:Carrier Gas, Fittings:1/8in Stainless Steel, Dimensions: 8 1/2in x 1 1/4in, High-purity output ensures 99.9999% pure gas, for easy, leak-tight cartridge changes

Tee Wrench, Hold 1/4inch or 6 mm tee or cross fittings secure in multiple orientations during installation, Fits easily in tool box, pouch, or belt, Cushioned vinyl grip with generous gripping area

Ultra-High-Purity Line Gas Regulator, Material:Chrome-Plated Brass, Fittings:1/4in female NPT ports, Outlet Gauge:30in, 0 to 200 psig (0-1,379 kPa)Outlet Pressure:0 to 150 psig (0-1,034 kPa), Oxidation-resistant, chrome-plated, Same purity protection

Hydrocarbon Kit, Includes:(2) 1/4in SS connectors, (1) hydrocarbon trap, and (2) wall-mounting clamps, Fittings:1/4in Stainless Steel, Largest-capacity traps available-run longer without replacing, Stainless steel construction withstands pressures up to 1,000 psig

Tubing, Coiled, Welded/Drawn0.030 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.030 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 50 feet roll

Tubing, Coiled, Welded/Drawn0.030 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.030 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 25 feet roll

Tubing, Coiled, Welded/Drawn0.030 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.030 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 20 feet roll

Tubing, Coiled, Welded/Drawn0.030 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.030 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 15 feet roll

Tubing, Coiled, Welded/Drawn0.030 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.030 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 10 feet roll

Tubing, Coiled, Welded/Drawn0.020 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.020 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 50 feet roll

Tubing, Coiled, Welded/Drawn0.020 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.020 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 25 feet roll

Tubing, Coiled, Welded/Drawn0.020 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.020 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 20 feet roll

Tubing, Coiled, Welded/Drawn0.020 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.020 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 15 feet roll

Tubing, Coiled, Welded/Drawn0.020 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.020 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 10 feet roll

Tubing, Coiled, Welded/Drawn0.010 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.010 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 50 feet roll

Tubing, Coiled, Welded/Drawn0.010 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.010 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 25 feet roll

Tubing, Coiled, Welded/Drawn0.010 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.010 inch, OD: 1/16 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 20 feet roll

Tubing0.210 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.210 inch, Outer Diameter: 1/4 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 6 feet roll

Tubing0.085 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.085 inch, Outer Diameter: 1/8 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 6 feet roll

Tubing0.04 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.04 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 6 feet roll

Tubing0.03 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.03 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 6 feet roll

Tubing0.02 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.02 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 6 feet roll

Tubing0.01 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.01 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 6 feet roll

Tubing, Coiled0.010 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.010 inch, Outer Diameter: 1/16 in, Unit: 10 feet roll

Tubing, Coiled0.085 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, ID: 0.085 inch, OD: 1/8 in, Wall Thickness: 0.020 inch, Unit: 50 feet roll

Tubing, Coiled0.085 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, ID: 0.085 inch, OD: 1/8 in, Wall Thickness: 0.020 inch, Unit: 10 feet roll

Tubing, Coiled 0.055 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.055 inch, OD: 1/8in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 100 feet roll

Tubing, Coiled, Welded/Drawn 0.210in. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, ID: 0.210in, OD: 1/4in, Wall Thickness: 0.020in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 100ft roll

Tubing, Coiled 0.180 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.180 inch, OD: 1/4in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 6 feet roll

Tubing, Coiled 0.055 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.055 inch, OD: 1/8in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 20 feet roll

Tubing, Coiled1/4in (6.35 mm). Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: 316L Stainless Steel, Electropolished, ID: 0.180in (4.57 mm), OD: 1/4in (6.35 mm), Wall Thickness: 0.035in, For Demanding/corrosive environments, High temperatures, Ultimate inertness, Unit: 100ft roll

Tubing 6ft. Tubing, Coiled, ID:0.277GC| (7.04 mm), OD:3/8GC| (9.52 mm), Material:Seamless 316L Stainless Steel, Deactivation:Sulfinert Treated, Wall Thickness:0.049GC|, Recommended for: Demanding/corrosive environments, High temperatures, Ultimate inertness, length: 6ft

Click-On In-line Super Clean Ultra-High Capacity Hydrocarbon Trap, Dimensions: 8 1/2x 1 1/4in.

Tubing0.01 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.01 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 10 feet roll

Tubing, Coiled, Welded/Drawn 0.011 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.011 inch, OD: 0.022 in, For Chromatography, Gas delivery systems, Lower pressures, Inert applications, Unit: 10 feet roll

Tubing, Coiled, Welded/Drawn 0.021 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.021 inch, OD: 0.029 in, For Chromatography, Gas delivery systems, Lower pressures, Inert applications, Unit: 100 feet roll

Tubing, Coiled, Welded/Drawn 0.011 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.011 inch, OD: 0.022 in, For Chromatography , Gas delivery systems, Lower pressures, Inert applications, Unit: 100 feet roll

Tubing, Coiled 0.210 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.210 inch, OD: 1/4inch, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 100 ft roll

Tubing, Coiled, Welded/Drawn0.085 in. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, ID: 0.085in, OD: 1/8in, Wall Thickness: 0.020in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 100 feet roll

Tubing 50ft. Tubing, Coiled, ID:0.085GC| (2.16 mm), OD:1/8GC| (3.18 mm), Material:316L Stainless Steel, Electropolished, Deactivation:Sulfinert Treated, Wall Thickness:0.020GC|, Recommended for: Demanding/corrosive environments, High temperatures, Ultimate inertness, length: 50ft

Tubing 25ft. Tubing, Coiled, ID:0.085GC| (2.16 mm), OD:1/8GC| (3.18 mm), Material:316L Stainless Steel, Electropolished, Deactivation:Sulfinert Treated, Wall Thickness:0.020GC|, Recommended for: Demanding/corrosive environments, High temperatures, Ultimate inertness, length: 25ft

Gap Inspection Gauge, fittings should sufficiently tightened, For use with 1/4in, 3/8in, 1/2in Swagelok fittings

Super Clean Carrier Gas Cleaning Kit. Super Clean Helium-Specific Carrier Gas Cleaning Kit, Includes:(2) 1/4in SS connectors and (1) oxygen/moisture/hydrocarbon helium-specific triple trap, Fittings:1/4in Stainless Steel, designed specifically for purification of helium in GC-MS systems

Swagelok Port Connector, Size:1/8in to 1/4in, Material:Stainless Steel.

Tubing0.210 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.210 inch, Outer Diameter: 1/4 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 50 feet roll

Tubing0.210 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.210 inch, Outer Diameter: 1/4 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 20 feet roll

Tubing0.085 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.085 inch, Outer Diameter: 1/8 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 50 feet roll

Tubing0.085 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.085 inch, Outer Diameter: 1/8 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 20 feet roll

Tubing0.085 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.085 inch, Outer Diameter: 1/8 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 15 feet roll

Tubing0.085 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.085 inch, Outer Diameter: 1/8 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 10 feet roll

Tubing0.04 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.04 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 50 feet roll

Tubing0.04 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.04 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 20 feet roll

Tubing0.04 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.04 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 10 feet roll

Tubing0.03 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.03 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 50 feet roll

Tubing0.03 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.03 inch, Outer Diameter: 1/16 inch, For providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 10 feet roll

Tubing, Coiled0.030 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.030 inch, Outer Diameter: 1/16 in, Unit: 10 feet roll

Tubing, Coiled0.040 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.040 inch, Outer Diameter: 1/16 in, Unit: 10 feet roll

Tubing, Coiled0.085 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.085 inch, Outer Diameter: 1/8 inch, Unit: 100 feet roll

Tubing, Coiled0.010 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.010 inch, Outer Diameter: 1/16 in, Unit: 100 feet roll

Tubing, Coiled0.020 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.020 inch, Outer Diameter: 1/16 in, Unit: 100 feet roll

Tubing, Coiled0.030 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.030 inch, Outer Diameter: 1/16 in, Unit: 100 feet roll

Tubing, Coiled, Welded/Drawn0.021 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.021 inch, OD: 0.029 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 50 feet roll

Tubing, Coiled, Welded/Drawn0.021 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.021 inch, OD: 0.029 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 25 feet roll

Tubing, Coiled, Welded/Drawn0.021 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.021 inch, OD: 0.029 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 20 feet roll

Tubing, Coiled, Welded/Drawn0.021 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.021 inch, OD: 0.029 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 15 feet roll

Tubing, Coiled, Welded/Drawn0.021 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.021 inch, OD: 0.029 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 10 feet roll

Tubing, Coiled, Welded/Drawn0.011 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.011 inch, OD: 0.022 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 50 feet roll

Tubing, Coiled, Welded/Drawn0.011 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.011 inch, OD: 0.022 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 25 feet roll

Tubing, Coiled, Welded/Drawn0.011 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.011 inch, OD: 0.022 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 20 feet roll

Tubing, Coiled, Welded/Drawn0.011 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Diameter: 0.011 inch, OD: 0.022 inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 15 feet roll

Tubing0.190 inch. Tubing, Rinsed and Cleaned, Material: Copper, Inner Diameter: 0.190 inch, Outer Diameter: 1/4 inch, Wall Thickness: 0.03 inch, Maximum Pressure: 1,000 psig, For plumbing Gas Chromatography systems, Cleaned to remove res X ual organics, Unit: 50 feet roll

Tubing, Coiled 0.180 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.180 inch, OD: 1/4in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 50 feet roll

Tubing, Coiled 0.180 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.180 inch, OD: 1/4in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 25 feet roll

Tubing, Coiled 0.180 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.180 inch, OD: 1/4in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 20 feet roll

Tubing, Coiled 0.180 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.180 inch, OD: 1/4in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 10 feet roll

Tubing, Coiled 0.055 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.055 inch, OD: 1/8in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 100 feet roll

Tubing, Coiled 0.180 inch. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.180 inch, OD: 1/4in, Wall Thickness: 0.035inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 100 feet roll

Tubing, Coiled, Welded/Drawn 0.210 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, ID: 0.210in, OD: 1/4in, Wall Thickness: 0.020inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 6ft roll

Tubing, Coiled, Welded/Drawn 0.085 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, ID: 0.085in, OD: 1/8in, Wall Thickness: 0.020inch, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 6ft roll

Tubing, Coiled1/4in (6.35 mm). Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: 316L Stainless Steel, Electropolished, ID: 0.180in (4.57 mm), OD: 1/4in (6.35 mm), Wall Thickness: 0.035in, For Demanding/corrosive environments, High temperatures, Ultimate inertness, Unit: 50 ft roll

Tubing, Coiled1/4in (6.35 mm). Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: 316L Stainless Steel, Electropolished, ID: 0.180in (4.57 mm), OD: 1/4in (6.35 mm), Wall Thickness: 0.035in, For Demanding/corrosive environments, High temperatures, Ultimate inertness, Unit: 25 ft roll

Tubing, Coiled1/4in (6.35 mm). Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: 316L Stainless Steel, Electropolished, ID: 0.180in (4.57 mm), OD: 1/4in (6.35 mm), Wall Thickness: 0.035in, For Demanding/corrosive environments, High temperatures, Ultimate inertness, Unit: 6 ft roll

Super Clean Carrier Gas Cleaning Kit. Super Clean Helium-Specific Carrier Gas Cleaning Kit, Includes:(2) 1/8in SS connectors and (1) oxygen/moisture/hydrocarbon helium-specific triple trap, Fittings:1/8in Stainless Steel, designed specifically for purification of helium in GC-MS systems

Tubing, Coiled 0.277inch. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.277inch, OD: 3/8inch, Wall Thickness: 0.049inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 6 feet roll

Tubing, Coiled 0.277inch. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.277inch, OD: 3/8in, Wall Thickness: 0.049inch, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 100 feet roll

Tubing 3/8in. Tubing, Coiled, ID:0.277GC| (7.04 mm), OD:3/8GC| (9.52 mm), Material:Seamless 316L Stainless Steel, Deactivation:Sulfinert Treated, Wall Thickness:0.049GC|, Inert applications,High temperatures, High pressures, Corrosive environments

Car Charger/ Power Adaptor, for Electronic Leak Detector.

Resin Bed Cartridge for Hydrogen Generators in FID-1000 and FID-2500 Gas Stations.

Replacement O-Ring for Click-On In-line Super Clean Connectors (includes 10 large and 10 small).

Tubing, Coiled0.085 in. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 316L Stainless Steel, Electropolished, ID: 0.085 in, OD: 1/8in, Wall Thickness: 0.020in, Unit: 60 ft

Super Clean Connector. Click-On In-line Super Clean Connector, Fittings:1/8in Stainless Steel, change traps quickly, without introducing oxygen, length: 2 3/8in (6 cm)

Tubing, Coiled0.085in. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 316L Stainless Steel, Electropolished, ID: 0.085in, OD: 1/8in, Wall Thickness: 0.02in, Unit: 50ft Roll

Super Clean Big Trap Replacement Trap. Click-On In-Line Super Clean Big Trap Replacement Trap, Type:Triple Helium Trap, Capacity: 2.0 L oxygen; 120 g total hydrocarbons; 70 g water

Swagelok Nut and Ferrule Set, Size:1/16in, Material:Brass.

Ultra-High-Purity Regulator, Material:Chrome-Plated Brass, Type:Dual-Stage, Fittings:DIN 477 no. 10 (N2), Outlet Gauge:30in, 0 to 14 bar (0-200 psig)Outlet Pressure:0 to 10 bar (0-150 psig), Oxidation-resistant, chrome-plated, Most stable outlet pressure control

Tubing, Coiled, Welded/Drawn0.040 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.040 inch, OD: 1/16in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 100 feet roll

Tubing, Coiled, Welded/Drawn0.040 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.040 inch, OD: 1/16in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 6 feet roll

Tubing, Coiled, Welded/Drawn0.020 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.020 inch, OD: 1/16in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 6 feet roll

Tubing, Straight 3/8 inch (9.52 mm). Tubing, Straight, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Grade Stainless Steel, Inner Diameter: 0.277 inch (7.04 mm), Outer Diameter: 3/8 inch (9.52 mm), Wall Thickness: 0.049 inch, Individual 6-foot (+/- 1/2 inch) straight pieces

Tubing, Straight 1/4 inch (6.35 mm). Tubing, Straight, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Grade Stainless Steel, Inner Diameter: 0.180 inch (4.57 mm), Outer Diameter: 1/4 inch (6.35 mm), Wall Thickness: 0.035 inch, Individual 6-foot (+/- 1/2 inch) straight pieces

Tubing, Coiled, Welded/Drawn0.010 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.010 inch, OD: 1/16in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 15 feet roll

Tubing, Coiled, Welded/Drawn0.010 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.010 inch, OD: 1/16in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 10 feet roll

Super Clean Big Trap Replacement Trap. Click-On In-Line Super Clean Big Trap Replacement Trap, Type:Triple Standard Trap, Capacity: 360 g total hydrocarbons

Replacement Desiccant Cartridge for Parker Balston Hydrogen Generators.

Tubing, Coiled, Welded/Drawn0.030 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.030 inch, OD: 1/16in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 100 feet roll

Tubing, Coiled, Welded/Drawn0.020 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.020 inch, OD: 1/16in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 100 feet roll

Tubing, Coiled, Welded/Drawn0.010 inch. Tubing, Coiled, Welded/Drawn, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.010 inch, OD: 1/16in, For Chromatography applications, Gas delivery systems, Lower pressures, Inert applications, Unit: 100 feet roll

Tubing, Coiled 0.055 in. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: Seamless 316L Stainless Steel, Inner Diameter: 0.055 in, OD: 1/8in, Wall Thickness: 0.035in, For Inert applications, High temperatures, High pressures, Corrosive environments, Zero bleed, Unit: 10 feet roll

Super-Clean Click-on Trap Purification Kit, Includes 2 Connectors and 1 Triple Trap Oxygen/Moisture/Hydrocarbon, Type:Carrier Gas, Type:Carrier Gas, Dimension: 8 1/2in x 1 1/4in, High-purity output ensures 99.9999% pure gas, Fittings:1/4in Brass

Super-Clean Click-on Trap Purification Kit, Includes 2 Connectors and 1 Triple Trap Oxygen/Moisture/Hydrocarbon, Type:Carrier Gas, Type:Carrier Gas, Dimension: 8 1/2in x 1 1/4in, High-purity output ensures 99.9999% pure gas, Fittings:1/8in Brass

Tube End Reducer, Material: Brass fitting, Size: 1/8inch to 1/4inch, For chromatograph.

Swagelok Ball Shut-Off Gas Valve, 3-Way, Size:1/4in, Material:Brass.

Tubing0.02inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.02inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 50 feet roll

Tubing0.01inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.01inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 50 feet roll

Tubing, Coiled0.020 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.020 inch, Outer Diameter: 1/16in, Unit: 10 feet roll

Tubing, Coiled0.030 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.030 inch, Outer Diameter: 1/16in, Unit: 50 feet roll

Male Connector, Material: Brass fitting, Size: 1/4inch to 1/8inch NPT, For chromatograph.

Male Connector, Material: Brass fitting, Size: 1/8inch to 1/4inch NPT, For chromatograph.

Tube Fitting, 1/4in VCO to 1/8inO-Ring Face Seal Fitting, Material: Stainless Steel fittingSmooth finish on gland face ensures positive seal, Pressure Ratings: Up to 15,400 psig, Temperature Ratings: 400 deg F, for rapid assemblyin pipe, tube, and welded systems

Tube Adaptor 1/4in VCO to 1/4in. Tube Adaptor, 1/4in VCO to 1/4inO-Ring Face Seal Fitting, Material: Stainless Steel fitting, Smooth finish on gland face ensures positive seal, Pressure Ratings: Up to 15,400 psig, Temperature Ratings: Up to 400 deg F, rapid assembly in pipe, tube & welded systems

Male Quick Coupling with shut off 1/4in male. Male Quick Coupling with shut off, Material: Stainless Steel fitting, Size: 1/4in male, For chromatograph

Male Quick Coupling with shut off 1/8in male. Male Quick Coupling with shut off, Material: Stainless Steel fitting, Size: 1/8in male, For chromatograph

Tubing0.210inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.210inch, Outer Diameter: 1/4inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Tubing0.04inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.04inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Tubing0.03inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.03inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Tubing0.02inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.02inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Tubing0.01inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.01inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Tubing Coiled 0.055. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated, Material: Seamless 316L Stainless Steel, Inner Dimension: 0.055GC|, Outer dimension: 1/8GC|, Hydroguard deactivation creates a high-density surface that is not readily attacked, unit: 50 feet roll

Tubing Coiled 0.055. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated, Material: Seamless 316L Stainless Steel, Inner Dimension: 0.055GC|, Outer dimension: 1/8GC|, Hydroguard deactivation creates a high-density surface that is not readily attacked, unit: 10 feet roll

Helium-Specific Carrier Gas Cleaning Kit, Includes: (2) 1/4in brass connectors and (1) oxygen/moisture/hydrocarbon helium-specific triple trap, Fittings: 1/4in Brass, are designed specifically for purification of helium in GC-MS systems

Tubing Coiled 0.180in. Tubing, Coiled, Deactivation: Silcosteel Treated, Material: 316L Stainless Steel, Electropolished, Inner Dimensions: 0.180in, Outer Dimensions: 1/4 in, highest performing tubing, Application: Demanding/corrosive environments, High temperaturesunit: 6 feet roll

Reducing Union, Size: 3/8in to 1/4in, Material: Siltek/Sulfinert-Treated.

Tubing Welded/Drawn0.210in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.210in, Outer Dimensions: 1/4 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 50 feet roll

Tubing Welded/Drawn0.210in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.210in, Outer Dimensions: 1/4 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 25 feet roll

Tubing Welded/Drawn0.210in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.210in, Outer Dimensions: 1/4 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 20 feet roll

Tubing Welded/Drawn0.210in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.210in, Outer Dimensions: 1/4 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 15 feet roll

Tubing Welded/Drawn0.210in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.210in, Outer Dimensions: 1/4 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 10 feet roll

Tubing Welded/Drawn 0.085in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.085in, Outer Dimensions: 1/8 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 25 feet roll

Tubing Welded/Drawn 0.085in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.085in, Outer Dimensions: 1/8 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 15 feet roll

Tubing Welded/Drawn0.210in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.210in, Outer Dimensions: 1/4 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 100 feet roll

Tubing Welded/Drawn 0.085in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.085in, Outer Dimensions: 1/8 in, most popular grade of tubing, Application: Chromatography, Gas delivery systems, Inertunit: 100 feet roll

Tubing Straight 0.277in. Tubing, Straight, Deactivation: Sulfinert Treated, Material: Seamless 316L Grade Stainless Steel, Inner Dimensions: 0.277in, Outer Dimensions: 3/8in, this tubing can be cut to your exact requirements using a standard tubing cutter, for metal componentsunit: 6 feet roll

Tube End Reducer, Size: 1/4in to 1/8in NPT, Material: Stainless Steel.

Tube End Reducer, Size: 1/8in to 1/4in NPT, Material: Stainless Steel.

Ultra-High-Purity Regulator no.9. Ultra-High-Purity Regulator, Material: Chrome-Plated Brass, Type: Single-Stage, Fittings: DIN 477 no.9 (Air), Outlet Gauge: 30in, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig), Oxidation-resistant, Identical gas purity protection

Ultra-High-Purity Regulator no.1. Ultra-High-Purity Regulator, Material: Chrome-Plated Brass, Type: Single-Stage, Fittings: DIN 477 no.1 (H2), Outlet Gauge: 30in, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig), Oxidation-resistant, Identical gas purity protection

Ultra-High-Purity Regulator no.6. Ultra-High-Purity Regulator, Material: Chrome-Plated Brass, Type: Single-Stage, Fittings: DIN 477 no.6 (He, Ar), Outlet Gauge: 30in, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig), Oxidation-resistant, Identical gas purity protection

Ultra-High-Purity Regulator no.10. Ultra-High-Purity Regulator, Material: Chrome-Plated Brass, Type: Single-Stage, Fittings: DIN 477 no.10 (N2), Outlet Gauge: 30in, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig), Oxidation-resistant, Identical gas purity protection

Tubing Welded/Drawn0.021in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.021in, Outer Dimensions: 0.029 in, most popular grade of tubing, Application: Chromatography, Gas delivery systemsunit: 6 feet roll

Tubing Welded/Drawn 0.011 in. Tubing, Welded/Drawn, Deactivation: Sulfinert Treated, Material: 304 Grade Stainless Steel, Inner Dimensions: 0.011 in, Outer Dimensions: 0.022 in, most popular grade of tubing, Application: Chromatography, Gas delivery systemsunit: 6 feet roll

Tubing Coiled 0.055. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated, Material: Seamless 316L Stainless Steel, Inner Dimension: 0.055GC|, Outer dimension: 1/8GC|, Hydroguard deactivation creates a high-density surface that is not readily attacked, unit: 100 feet roll

Tubing Coiled 0.055in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.055in, Outer Dimensions: 1/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 50 feet roll

Tubing Coiled 0.055in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.055in, Outer Dimensions: 1/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 25 feet roll

Tubing Coiled 0.055in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.055in, Outer Dimensions: 1/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 10 feet roll

Tubing Coiled 0.040in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.040in, Outer Dimensions: 1/16 in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 20 feet roll

Tubing Coiled 0.040in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.040in, Outer Dimensions: 1/16 in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 15 feet roll

Tubing Coiled 0.040in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.040in, Outer Dimensions: 1/16 in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 10 feet roll

Helium-Specific Carrier Gas Cleaning Kit, Includes: (2) 1/8in brass connectors and (1) oxygen/moisture/hydrocarbon helium-specific triple trap, Fittings: 1/8in Brass, are designed specifically for purification of helium in GC-MS systems

Tubing Coiled 0.180 in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.180in, Outer Dimensions: 1/4in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 100 feet roll

Tubing Coiled 0.180in. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: 316L Stainless Steel, Electropolished, Inner Dimensions: 0.180in, Outer Dimensions: 1/4in, highest performing tubing, Application: Demanding/corrosive environments, High temperaturesunit: 50 feet roll

Tubing Coiled 0.180in. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: 316L Stainless Steel, Electropolished, Inner Dimensions: 0.180in, Outer Dimensions: 1/4in, highest performing tubing, Application: Demanding/corrosive environments, High temperaturesunit: 25 feet roll

Click-On Super Clean Replacement Trap, Type: Triple Trap(removes oxygen, moisture, hydrocarbons).

Tubing Coiled 0.277in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.277in, Outer Dimensions: 3/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 50 feet roll

Tubing Coiled 0.277in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.277in, Outer Dimensions: 3/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 25 feet roll

Tubing Coiled 0.277in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.277in, Outer Dimensions: 3/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 10 feet roll

Tubing Coiled 0.277in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.277in, Outer Dimensions: 3/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 50 feet roll

Tubing Coiled 0.277in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.277in, Outer Dimensions: 3/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 25 feet roll

Tubing Coiled 0.277in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.277in, Outer Dimensions: 3/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 15 feet roll

Universal AC Power Adaptor, for Electronic Leak Detector.

Click-On In-Line Super Clean Big Trap Wall-Mounting Clamp Set.

Ball Valve, 3-Way, Straight, Size: 1/4in, Material: Stainless Steel.

Ball Valve, 3-Way, Straight, Size: 1/8in, Material: Stainless Steel.

Metering Gas Valve, straight, Material: Chrome-Plated Brass, Size: 1/4in.

Ultra-High-Purity Regulator no.4. Ultra-High-Purity Regulator, with International Fittings, Identical gas purity protection, Material: Stainless Steel, Type: Single-Stage, Fittings: BS 341 no. 4 (H2), Outlet Gauge: 30in, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig)

Ultra-High-Purity Regulator no.3. Ultra-High-Purity Regulator, with International Fittings, Identical gas purity protection, Material: Stainless Steel, Type: Single-Stage, Fittings: BS 341 no.3 (He, Ar, Air, N2), Outlet Gauge: 30in, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig)

Tube End Reducer, Size: 1/4in to 1/16in, Material: Stainless Steel.

Male Connector, Size: 1/4in to 1/8in NPT, Material: Stainless Steel.

Male Connector, Size: 1/8in to 1/4in NPT, Material: Stainless Steel.

Male Connector, Size: 1/4in to 1/4in NPT, Material: Stainless Steel.

Male Connector, Size: 1/16in to 1/8in NPT, Material: Stainless Steel.

Female Connector, size: 1/4in to 1/8in NPT, Material: Stainless Steel.

Female Connector, size: 1/4in to 1/4in NPT, Material: Stainless Steel.

Female Connector, size: 1/8in to 1/8in NPT, Material: Stainless Steel.

Female Quick Coupling, Size:1/4in Female, Material: Stainless Steel.

Male Quick Coupling, Size: 1/4in male, Material: Stainless Steel.

Female Quick Coupling, Size:1/8in Female, Material: Stainless Steel.

Tubing Coiled 0.277in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.277in, Outer Dimensions: 3/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environments

Tubing Coiled 0.180 in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.180 in, Outer Dimensions: 1/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 50 feet roll

Tubing Coiled 0.180 in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.180 in, Outer Dimensions: 1/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 25 feet roll

Tubing Coiled 0.180 in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.180 in, Outer Dimensions: 1/8in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 10 feet roll

Tubing Coiled 0.055 in. Tubing, Coiled, Deactivation: Silcosteel-CR Treated, Material: Seamless 316L Stainless Steel, Inner Dimensions: 0.055 in, Outer Dimensions: 1/4in, high durability tubing, Application: Inert applications, High temperatures, Corrosive environmentsunit: 100 feet roll

Helium-Specific Replacement Triple Trap, Applications: removes oxygen, moisture and hydrocarbons.

Tubing Coiled 0.085in. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: 316L Stainless Steel, Electropolished, Inner Dimensions: 0.085in, Outer Dimensions: 1/8in, highest performing tubing, Application: Demanding/corrosive environments, High temperaturesunit: 100 feet roll

Tubing Coiled 0.085in. Tubing, Coiled, Deactivation: Sulfinert Treated, Material: 316L Stainless Steel, Electropolished, Inner Dimensions: 0.085in, Outer Dimensions: 1/8in, highest performing tubing, Application: Demanding/corrosive environments, High temperaturesunit: 6 feet roll

Tubing Coiled 0.055in. Tubing, Coiled, Deactivation: Sulfinert Treated, Inner Dimensions: 0.055in, Outer Dimensions: 1/8in, High durability tubing, Application: Inert applications, High temperatures, Corrosive environments, High pressures, Zero bleed, metal componentsunit: 6 feet roll

Purification Kit, Includes: (4) 1/8in Stainless Steel connectors and (2) hydrocarbon/moisture traps, Type: Fuel Gas, Fittings: 1/4in Stainless Steel, High-purity output ensures, 99.9999% pure gas, brass or stainless steel, 1/4in or 1/8in, Triple gas trap is ideal

Purification Kit, Includes: (4) 1/8in brass connectors and (2) hydrocarbon/moisture traps, Type: Fuel Gas, Fittings: 1/4in Brass, High-purity output ensures, 99.9999% pure gas, leak-tight cartridge changes; brass or stainless steel, 1/4in or 1/8in, Triple gas trap is ideal

Purification Kit, Includes: (4) 1/8in brass connectors and (2) hydrocarbon/moisture traps, Type: Fuel Gas, Fittings: 1/8in Brass, High-purity output ensures, 99.9999% pure gas, leak-tight cartridge changes; brass or stainless steel, 1/4in or 1/8in, Triple gas trap is ideal

Replacement O-Rings (5 small O-rings and 5 large O-rings), for High-Capacity Indicating Oxygen Trap

Wash Face Seal, For HPLC systems, Model Number: ACQUITY, nanoACQUITY.

Face Seals Replacement Kit, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

Pump 1525 PM Kit, Preventive Maintenance Kit for HPLC Systems, Model Number: 1525 Pump, Includes: sapphire plungers, check valve cartridges, plunger seals, solvent reservoir 10 um filters, reference valve button, valve disk spacer, valve disk

Hub-Cap Adaptor and Opti-Cap (for use with GL-45 solvent bottles).

Head Plunger Seal Kit, for HPLC Systems, Includes: head plunger seals (2), back-up washers (2), Model Number: ACQUITY, nanoACQUITY

Frit Adaptor, Material: PTFE, Connects to standard 1/8 inch OD (3.2 mm) PTFE tubing.

Standard Pump Seal Kit, for HPLC Systems, Model Number: 200 Series.

Hub-Cap Adaptor Multi-Pack, to use the Opti-Cap Top with 4-liter solvent bottles.

Hub-Cap Adaptor (allows use of the Opti-Cap with 4 L solvent bottles).

HPLC PEEK Performance Kit, for HPLC system, Includes: Hub-Cap Adapter with cap, Tubing Clips, Clean Cut Tubing Cutter, PEEK Finger Tight Fittings, PEEK Column, Plugs, PEEK 90 deg Tubing Elbows, PEEK 180 deg Tubing Elbows, PEEK Column Connectors

Bio-Safe Column System, PEEK, 4.6 mm ID x 30 mm length column with end fittings, 2.0 um frits, Completely biocompatible, 100% metal free, Stable to 8,000 psi, precision-machined from virgin PEEK (polyetheretherketone), a strong, inert polymer material

Ferrule, Material: Stainless Steel, Size: 1/16inch.

AA Battery Replacement for the Waste Overflow Indicator for LC Systems.

Waste Overflow Indicator 4L. Waste Overflow Indicator for LC Systems, 4 Liter solvent bottle, Audible alarm instantly alerts user, preventing overflow, Compact, battery-operated unit, messy pooling around mobile phase waste containers should be avoided

Secure-Fit Fitting Two Connector. Secure-Fit Fitting, Two Connector, ID: 0.005 inch, Length: 50 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Waste Overflow Indicator GL-45. Waste Overflow Indicator for LC Systems, GL-45 solvent bottle, Audible alarm instantly alerts user, preventing overflow, Compact, battery-operated unit, messy pooling around mobile phase waste containers should be avoided

AA Batteries Replacement for the Waste Overflow Indicator for LC Systems.

Capillary Tubing Assembly With Fittings, for HPLC Systems, ID: 0.25 mm, Length: 700 mm, Material: Stainless Steel, Model Number: 1050, Precut, micropolished tubing and preseated fittings for quick, Blue 1/16inch SS Male Nut, F/B Ferrule Set 1/16inch Rheodyne Male Nut

Capillary Tubing Assembly With Fittings, for HPLC Systems, ID: 0.17 mm, Length: 800 mm, Material: Stainless Steel, Model Number: 1050, Precut, micropolished tubing and preseated fittings for quick, Green 1/16inch SS Male Nut, F/B Ferrule Set 1/16inch Rheodyne Male Nut

Hub-Cap Multi-Pack, Hub-Cap bottle tops are a great way to neatly keep your mobile phase lines.

In-Line Mixer 1ul. In-Line Mixer, HyperShear Static, Material: Stainless Steel, Volume: 1uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

In-Line Mixer 25ul. In-Line Mixer, HyperShear Static, Material: Stainless Steel, Volume: 25uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

In-Line Mixer 1ul. In-Line Mixer, HyperShear Static, Material: PEEK, Volume: 1uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

In-Line Mixer 50ul. In-Line Mixer, HyperShear Static, Material: PEEK, Volume: 50uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

In-Line Mixer 25ul. In-Line Mixer, HyperShear Static, Material: PEEK, Volume: 25uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

In-Line Mixer 250ul. In-Line Mixer, HyperShear Static, Material: PEEK, Volume: 250 uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

Pump 515 PM Kit, Preventive Maintenance Kit for HPLC Systems, Model Number: 515 Pump, Includes: PerformancePLUS check valves, sparge diffuser, solvent reservoir 10 um filter, sapphire plungers, plunger seals, pivot inserts, pivot guides, washer, plunger springs, retaining rings

MXT Low Dead Volume Connector Kit, Fits Column ID: For 0.32 mm ID MXT Columns, Includes: MXT union, 1/32-inch ferrules (2) and nuts (2), for Metal Columns, Connect a guard column/transfer line to an MXT stainless steel column, Stainless steel ferrules and nuts

MXT Low Dead Volume Y Connector Kit, Siltek Fits Column Internal Diameter: For 0.32 mm ID MXT Columns, Includes: MXT union, 1/32-inch ferrules (3) and nuts (3), For Metal Columns, Connect two MXT columns to one inlet or one MXT column to two detectors

Angled Y Press-Tight Connector. Universal Angled Y Press-Tight Connector, Deactivation: Deactivated fused quartz eliminate activity for complete inertness along the GC flow path, Universal fit: use with 0.1-0.53 mm ID columns (0.33-0.74 mm OD), ideal for organochlorine pesticides analysis

PressFit Connector. Defined PressFit Connector, Material: Borosilicate Glass (Deactivated), Fits Column Internal Diameter: For 0.32 mm to 0.53 mm ID Columns, Color: Black to Blue (end codes), ID-specific ends for better sealabilit, Repair a broken column, Connect guard column to analytical column

PressFit Connector. Defined PressFit Connector, Material: Borosilicate Glass (Deactivated), Fits Column Internal Diameter: For 0.32 mm to 0.53 mm ID Columns, Color: Black to Blue (end codes), ID-specific ends for better sealabilit, Repair a broken column, Connect guard column to analytical column

PressFit Connector. Defined PressFit Connector, Material: Borosilicate Glass (Deactivated), Fits Column Internal Diameter: For 0.32 mm to 0.32 mm ID Columns, Color: Black to Black (end codes), ID-specific ends for better sealabilit, Repair a broken column, Connect guard column to analytical column

PressFit Connector. Defined PressFit Connector, Material: Borosilicate Glass (Deactivated), Fits Column ID: For 0.18/0.25 mm to 0.32 mm ID Columns, Color: Red to Black (end codes), ID-specific ends for better sealabilit, Repair a broken column, Connect guard column to analytical column

Claw, Easily removes hot liners from injection ports, 4 mL vials can be replaced when dirty.

Flashlight with Swivel Head, Ideal for tight spaces-like inside a GC oven, Uses two AA batteries (included)

Mass Spec Cleaning Kit without Dremel Tool, GC-MS Cleaning Kit, Includes: Lint-free nylon gloves, Lint-free cotton cloth, Micro mesh 4 x 6 sheet, Aluminum oxide, Cotton tip applicators, Tweezers, large/small, Septum puller, Dremel tool, battery-operated, Tool kit bag

Claw Holder Kit (includes The Claw and holder), Easily removes hot liners from injection ports, 4 mL vials can be replaced when dirty

Spanner Wrench, for 5890/6850/6890/7890 FID Collector Assemblies, Easily remove the nut from the FID collector without damaging the nut, Unique, ergonomic handle-easy to grip, Fits all instrument models

Open-End Wrench, High-quality wrenches for tightening capillary fittings, Size: 3/8 inchx7/16 inch.

Metric Wrench Set, High-quality 6 x 7 mm, 8 x 10 mm and 16 x 17 mm wrenches for tightening a wide variety of fittings

Liner Cap Removing Tool, for GCs: Focus GC, TRACE GC Ultra & TRACE GC x GC, Easily loosens the liner cap from the injector, Unique, ergonomic handle-easy to grip

Capillary Installation Gauge, for TRACE & Focus SSL (M4 Ferrules), Seats ferrule onto column for consistent installations, Prevents crushed column ends, Made from high-quality stainless steel, For use with graphite ferrules only

Mass Spec Cleaning Kit Replacement Parts Kit, for GC-MS Cleaning Kit, Includes: cloths, micro mesh sheets, small and large gloves

Standard Ferrule 1/4in. Standard Ferrule, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/4in, Ferrule ID: 1/4in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines, also for 1/16, 1/8 in Fittings

Standard Ferrule 1/8in. Standard Ferrule, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Ferrule ID: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines, also for 1/16, 1/4 in Fittings

Capillary Ferrule 1.0 mm. Capillary Ferrule, Material: VG2, 60% Vespel/40% Graphite, Fits Column ID: 0.28 mm, ferrule ID: 1.0 mm, for 1/16 in Compression-Type Fittings, For micropacked column, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Ferrules for Micropacked Column, Standard, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 1/16in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectorascopy transfer lines, also for 1/8, 1/4-In Fitting

Compact Ferrule 0.8 mm. Compact Ferrule, Fits Column ID: 0.45/0.53 mm (Fused Silica Column), Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 0.8 mm, Seal with minimal torque, reusable, and for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines

Compact Ferrule 0.5 mm. Compact Ferrule, Fits Column ID: 0.32 mm (Fused Silica Column), Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 0.5 mm, Seal with minimal torque, reusable, and for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines

Compact Ferrule 0.5 mm. Compact Ferrule, Fits Column ID: 0.32 mm (Fused Silica Column), Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 0.5 mm, Seal with minimal torque, reusable, and for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines

Compact Ferrule 0.4mm. Compact Ferrule, Fits Column ID: 0.25/0.28mm (Fused Silica Column), Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 0.4mm, Seal with minimal torque, reusable and preferred for vacuum and high-pressure uses, Stable to 400C, for mass spectroscopy transfer lines

Capillary Ferrule 1.0 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.75 mm, ferrule ID: 1.0 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 0.8 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.45/0.53 mm, ferrule ID: 0.8 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 0.8 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.45/0.53 mm, ferrule ID: 0.8 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 0.6 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.28 mm, ferrule ID: 0.6 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Reducing Ferrule 0.8 mm. Reducing Ferrule, Fits Column ID: 0.25 mm, Ferrule ID: 0.8 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, For mass spectroscopic transfer lines

Reducing Ferrule 0.5 mm. Reducing Ferrule, Fits Column ID: 0.25 mm, Ferrule ID: 0.5 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, For mass spectroscopic transfer lines

Reducing Ferrule 0.4 mm. Reducing Ferrule, Fits Column ID: 0.25 mm, Ferrule ID: 0.4 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, For mass spectroscopic transfer lines

Capillary Ferrule 0.5 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.32 mm, ferrule ID: 0.5 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 0.5 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.32 mm, ferrule ID: 0.5 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 0.4 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID:0.10/0.15/0.18/0.25/0.28 mm, ferrule ID: 0.4 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses

Capillary Ferrule 0.3 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, ID: 0.3 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, preferred for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines

Heater/Sensor Assembly, Use with FID, TCD, NPD, and split/splitless inlets, for Agilent 6850/6890/7890 and Accessory for Gas chromatography

Ferrule. Compact Ferrule, ID: 0.4 mm, Fits Column ID: 0.25/0.28 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, Fit 0.45/0.53mm ID Fused Silica Columns, for PerkinElmer Gas chromatography, Stable to 400 Degree C.

Ferrule. Standard Ferrule, ID: 0.4 mm, Fits Column ID: 0.10/0.15/0.18/0.25/0.28 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, Fit G 0.28mm ID Fused Silica Columns, for PerkinElmer Gas chromatography, Stable to 400 Degree C.

Cap. Hub-Cap 4-Liter Bottle Tops, assembly of the bottle cap and plug, Use them instead of plastic paraffin film, aluminum foil, or tape on your mobile phase reservoirs.

Solvent Filter. Bluestem Glass Solvent Filter, provides clean mobile phase to extend the life of columns and pump seals. Connects to standard 1/8in OD (3.2 mm) PTFE tubing using your existing frit adaptor, allows instant visual confirmation of upright filter orientation.

Static In-Line Mixer. HyperShear Static In-Line Mixer, Material: PEEK, Volume: 150 uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization.

Hub-Cap Filter kit. Hub-Cap Filter Kit for 4 L or Wheaton bottles, includes: bottle adaptor with nut, filter inlet cap, grid support, vacuum hose barb, tube compression fitting, grid, 0.22 um/0.45um filter membrane, ultra chemical resistant, FEP-lined Tygon tubing, box with shrink-wrap insert

Vernier Knob for Swagelok Metering Gas Valves, Accessory for gas chromatography.

Ball Valve, Shut-Off Gas Valve, Size: 1/8in, Material: Stainless Steel, Accessory for gas chromatography

Valve. Metering Gas Valve, straight, Material: Chrome-Plated Brass, Size: 1/8in, Accessory for gas chromatography

Toggle Valve, Shut-Off Gas Valve, Size: 1/8in, Material: Brass, Accessory for gas chromatography.

Port Connector, Size: 1/8in to 1/4in, Material: Brass, Accessory for gas chromatography, Pack 5.

Tube End Reducer, Size: 1/8in to 1/16in, Material: Brass, Accessory for gas chromatography, Pack 5.

Reducing Union, Size: 1/4in to 1/16in, Material: Brass, Accessory for gas chromatography, pack 5.

Septa. Merlin Microseal Septa, 400 Degree C max injection port temperature. Includes: Nut, Adapter, O-Ring, & 1 General-Purpose Microseal, For Bruker/Varian Gas chromatography

EZ Injection Port Assembly Kit. EZ Twist Top Split/Splitless Injection Port Assembly Kit, Includes: split/splitless weldment, shell weldment, 2 weldment O-rings, Siltek dual Vespel ring inlet seal, reducing nut, stainless steel capillary nut for use with 1/16in ferrules, and weldment removal tool

Inlet Liner. Taper Inlet Liner, 3.5 mm, For 17A, 2010, and 2014 Gas chromatography equipped with split and splitless inlets, 95 mm, 5.0 mm, Borosilicate Glass, pack5

Inlet Liner. Double Taper Inlet Liner, 3.5 mm, For 17A, 2010, and 2014 Gas chromatography equipped with split and splitless inlets, 95 mm, 5.0 mm, Borosilicate Glass

Kit. EZ Twist Top split and splitless Injection Port Assembly Kit, for gas chromatography, Siltek Treated, Weldment removal tool allows for quick removal of the hot weldment without fingers ever touching hot surfaces

Inlet Seal. Flip Seal Dual Vespel Ring Inlet Seals, 1.2 mm, Gold-Plated, Reversible, two-sided design allows significantly more analyses than other seals, at the same price-simply use, flip, then use again, Very little torque required to make seal-reduces operator variability.

Inlet Seal. Dual Vespel Ring Cross-Disk Inlet Seals, Dual Vespel Ring Cross-Disk Inlet Seals, Washerless, leak-tight seals, Ideal for high-flow split applications 500 Ml/min, 0.8 mm

Liner, straight-through liner, Split, 4mm, pack25.

FocusLiner, Split / Splitless, 4mm, pack25.

Splitless focusliner with top end restriction for use with 70mm needle, 5mm, pack 25.

Liner varian 1078/1079 split/splitless 3.4mm, single taper pack 25.

Liner varian 1075/1077 4mm, split tapered focusliner pack1.

Liner, Split/Splitless Single Taper, pack5.

O-ring viton for liner pack 10.

Sealing Ring. Graphite Sealing Ring - Can be used at temperatures up to 325 C. For use with 4mm OD liners, Pack10

Liner thermo tq (ce) trace/focus scintered glass large volume injection pack 5.

Liner shimadzu 17a/2010/2014/2025 3.4mm id split/splitless with middle gooseneck pack 5.

Liner, Split / Splitless with Single Taper, 3.4x95, pack5.

Liner, 3.4mm, split/splitless focusliner, pack 5.

Focusliner, 3.4mm, split/splitless tapered pack 5.

Splitless focusliner 5mm, for use with 50mm needle pack 5.

Ferrule. Siltite ferrules, 0.53mm, columns gas chromatography14a gas chromatography17a gas chromatography2010 and gas chromatography2014 detector / injectors, pack10

Ferrule. Siltite ferrules, 0.32mm, columns gas chromatography14a gas chromatography17a gas chromatography2010 and gas chromatography2014 detector / injectors, Pack10

Ferrule. Siltite ferrule 1/32 column qp5000/5050 wide bore mass spectrometry interface qp2010 injector and qp2010 standard mass spectrometry interface, pack10

Siltite ferrules for 0.53mm, column pack10.

Siltite ferrules for 0.32mm, column pack10.

Siltite ferrules for 0.10-0.25mm ID columns pack10.

Siltite metal nuts (packet of 5) thermo gas chromatography and mass spectrometry.

Bulkhead Union with 0.8mm, No restiction, Material: Glass Lined Stainless Steel, allows plate mounting of the union, for use with fused silica, low dead volume, high temperature applications

Bulkhead Union with 0.4mm, and 0.25mm restriction at one end, Material: Glass Lined Stainless Steel, allows plate mounting of the union, for use with fused silica, low dead volume, high temperature applications

Bulkhead Union with 0.5mm, and 0.35mm restriction at one end, Material: Glass Lined Stainless Steel, allows plate mounting of the union, for use with fused silica, low dead volume, high temperature applications

Extended nuts, 1/8hole extentedStainless steel, pack5.

Extended nuts, 1/8inch x 4mm Stainless steel, pack5.

Spanner 3/16inch x 1/4inch AF, Stainless Steel, For standard nuts use reducing short ferrules.

Siltite mini union ferrules 1/32 column pack10.

Siltite mini union 0.8mm id for 1/32 columns.

Tubing. Fused silica tubing non-deactivated 100umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated150umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated75umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated50umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated25umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated 10m x 220um/363um, tubing, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated 10m x 50um id/220um, tubing, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Liner varian 1078/1079 1.8mm, scintered glass large volume injection pack 25.

Reducing Ferrule, Short, Hole:1/8inch, 9.5x4.6mm, Material: Graphite, For 1/4 fitting pack10.

Metal - initial installation. Siltite metal - initial installation (10 ferrules 2 nuts 2 base seals) 1/32, for split or splitless injector

Siltite metal nuts (packet of 5) varian gas chromatography.

Siltite metal nuts - qp5000/5050 standard mass spectrometry interface (packet of 5).

Siltite metal - initial installation kit (10 ferrules 2 nuts)0.32mm, columns for qp5000/5050 standard mass spectrometry interface

Siltite metal nuts, Slotted, (packet of 5) injector.

Tubing. Fused silica tubing deactivated replacement for silflow 2m x 200umx 363um, features chemically deactivated stainless steel channels avoiding active sites experienced with conventional connections, reliable zero dead volume connection.

Tubing. Fused silica tubing deactivated replacement for silflow 2m x 150umx 363um, features chemically deactivated stainless steel channels avoiding active sites experienced with conventional connections, reliable zero dead volume connection.

Tubing. Fused silica tubing deactivated replacement for silflow 2m x 100umx 363um, features chemically deactivated stainless steel channels avoiding active sites experienced with conventional connections, reliable zero dead volume connection.

Tubing. Fused silica tubing deactivated replacement for silflow 2m x 50umx 363um, features chemically deactivated stainless steel channels avoiding active sites experienced with conventional connections, reliable zero dead volume connection.

Ferrules silflow fingertight 0.55mm, pack 10.

Tubing. Silflow stainless steel capillary tubing 75 cm long 1.1mm od sleeved to 1/16 at one end, Gas Chromatography Replacement Parts, highly efficient and reliable micro fluidic platform features chemically deactivated stainless steel channels avoiding active sites

Ferrules silflow fingertight 0.75mm, pack 10.

Ferrules silflow fingertight 0.8mm, pack 10.

Tackified Entrance Mat With Multi-Layered Clean Films, Grey, 18in X36in, 30 Sheets/Mat.

Tubing. Fused silica capillary VSPD tubing phenyl deactivated 5m x 530um id/680um, Chemically inert and thermally stable up to 380C, Suitable for organic and aqueous solvents, Clean entry for on-column injection, Ideal for biotechnology applications, Reduces likelihood of blockages

Tubing. Fused silica capillary VSPD tubing phenyl deactivated 5m x 320um id/430um, Chemically inert and thermally stable up to 380C, Suitable for organic and aqueous solvents, Clean entry for on-column injection, Ideal for biotechnology applications, Reduces likelihood of blockages

Tubing. Fused silica capillary VSPD tubing phenyl deactivated 5m x 220um id/363um, Chemically inert and thermally stable up to 380C, Suitable for organic and aqueous solvents, Clean entry for on-column injection, Ideal for biotechnology applications, Reduces likelihood of blockages

Liner, Varian 1075/1077, 4mm Internal diamter, REST Split Quartz Wool Pack of 1.

Liner, PerkinElmerAutosystem/Clarus500/Clarus600 4mm Inner diameter, Split/Splitless Tapered FocusLiner Pack 25

Autoseal Tip Assembly for ASE 200 Extraction Systems, Siltek Treated.

Autoseal Tip Assembly for ASE 200 Extraction Systems, Stainless Steel.

Threaded Cap Insert for ASE 200 Extraction system, Stainless Steel.

Threaded Cap Insert for ASE 300 Extraction system, Stainless Steel.

Extraction Cell Body for ASE Extraction system 100/300 and 150/350, Stainless Steel, 34 mL.

Extraction Cell Body for ASE Extraction system 100/300 and 150/350, Stainless Steel, 66 mL.

Funnel for ASE Extraction system 200, Smooth inner surfaces for easier cleaning.

Resprep Tool Handle for ASE Extraction System 100/200/300.

Valve Attachment for caps for Resprep SPE Manifolds.

Filter Insertion Attachments(1 mL, 5 mL, 11 mL, 33 mL) for ASE Extraction System 100/200/300.

O-Rings for ASE 200 and ASE 300 Extraction System Caps, Pk50.

Filter 20 mm for ASE 200 Extraction Cells, Cellulose.

Sodium Sulfate, Cas number: 7757-82-6, Chemical formula: Na2SO4, Size: 5kg.

Filter 30mm for ASE 100/300 Extraction Cells, Cellulose or glass fiber construction.

Funnel for ASE 100/300 Extraction Systems.

Replacement Extraction Cell End Caps for ASE 100/300 Extraction Systems.

Replacement Frits for ASE 100/300 Extraction Systems.

PEEK Washers for ASE 200 Extraction Systems.

Tube Adaptors 2ml for Q-sep 3000 Centrifuge.

Autoseal Tip Assembly for ASE 300 Extraction Unit, Stainless Steel.

Autoseal Tip Assembly for ASE 300 Extraction Unit, Siltek treated.

Conical Tube Insert 50ml for Q-sep 3000 Centrifuge.

Tubing Assembly for ASE 300 Extraction Unit, improved design.

Tubing Assembly for ASE 200 Extraction Unit, improved design.

Bottle. Collection Bottle, Cleaned, assembled, Amber Glass, 250 mL, Cap and PTFE-lined septa for ASE 100/300 Extraction Unit

REACTI-BLOCK B-1, Holds 9 x 3 ml or 5 ml Reacti-Vials; 9 holes/21 mm dia. x 32 mm deep.

Reacti-therm (tm) i heating/ stirring module.

Split Straight Liner for , 4mmID, 78.5mm, Pk 5, for Use With (Equipment) GC Injection Port.

Silver seal pk10 for Thermo SSL injector.

Graphite Ferrule for 0.45-0.53 Pk 10.

Oxygen Cartridge Filter with Indicator. for Use With Inert Carrier, Technique GC and GC/MS, Indicator Change Green to Gray

Hydrocarbon Cartridge Filter. for Use With Inert Carrier, Air, H2, Technique GC and GC/MS, Cartridge Type Hydrocarbon

Siltite u-union ferrule 0.32MM id column.

Siltite u-union ferrule 0.32MM id column.

Siltite u-union replacement union 0.1-0.32MM id column.

Siltite u-union replacement union 0.1-0.32MM id column.

Marathon septa 9mm 50pk. Pre-pierced for reliable performance, Up to 400 injections per septa, Maximum temperature 400 degree celsius

Marathon septa 17mm 50pk. Pre-pierced for reliable performance, Up to 400 injections per septa, Maximum temperature 400 degree celsius

Marathon septa 11mm 50pk. Pre-pierced for reliable performance, Up to 400 injections per septa, Maximum temperature 400 degree celsius

Tr-blue septa 9mm 50pk. General purpose septa, Easy to penetrate, Maximum temperature 200-250 degree celsius

Tr-blue septa 11mm 50pk. General purpose septa, Easy to penetrate, Maximum temperature 200-250 degree celsius

Siltite u-union kit 0.1-0.25mm id column to 0.32mm id.

Kit siltite u-union 0.1-0.25mm id column.

Kit siltite u-union 0.1-0.25mm id column to 0.53mm id.

Kit siltite u-union 0.32mm id column.

Siltite u-union ferrule 0.1-0.25mm id column.

Kit siltite u-union 0.32mm id column to 0.53mm id.

Siltite u-union ferrule 0.1-0.25mm id column.

Gas regulator 1/4inch tube.

Gas regulator 1/8inch tube.

Tubing stainless steel 1/8inch od 0.085inch id 25ft.

Tubing copper 1/8inch od 0.065inch id 50ft.

O-Ring. Material: Graphite, for Shimadzu 2010 and 2014 GCs, for Splitless Liners, Maximumium Temperature : 450 DegreeC

Nut, Brass & Stainless Steel, Size: 1/4inch, Material: Stainless Steel, Swagelok fitting.

Front Ferrule, Size: 1/18inch, Material: Stainless Steel, Swagelok.

Back Ferrule, Size: 1/8inch, Material: Stainless Steel, Swagelok.

Back Ferrule, Size: 1/4inch, Material: Stainless Steel, Swagelok.

Cartridge, Active Inlet, Model number: 1050, 1100, 1200, for HPLC Systems.

Filter, Solvent Inlet, Model number: 1050, 1090, 1100, 1200, for HPLC Systems.

Stator Face Assembly, Model number: 1100, 1200, for HPLC Systems.

Injector Lubricant, Model number: 1050, 1100, for HPLC Systems.

Tubing With Fittings, Model number: 1090, ID: 0.17mm, Length: 130mm, Material: Stainless Steel, for HPLC Systems

Tubing With Fittings, Model number: 1050, ID: 0.25mm, Length: 700mm, Material: Stainless Steel, for HPLC Systems

Tubing With Fittings, Model number: 1100, ID: 0.17mm, Length: 180mm, Material: Stainless Steel, for HPLC Systems

Capillary Tubing. Capillary Stainless steel Tubing ID: 0.17mm, Length: 105mm, Material: Stainless Steel, for HPLC Systems

Valve to Metering Head. Capillary SS Tubing, Valve to Metering Head ID: 0.17mm, Length: 105mm, Material: Stainless Steel, for HPLC Systems

Capillary SS Tubing, ID: 0.17mm, Length: 280mm, Material: Stainless Steel,for HPLC System.

Capillary SS Tubing, ID: 0.17mm, Length: 150mm, Material: Stainless Steel,for HPLC System.

Ferrule. Fitting 1/16inch, Front and Back Ferrules, Material: Stainless Steel, Precut, micropolished tubing and preseated fittings for quick, easy maintenance of HPLC systems.

ECD Fused Silica Liner 1.0mm x 1.25 x 39 Replacement.

Micro ECD Liner Replacement.

Polar ISO Column Test Mix, Conc. In Solvent and Volume: 250 ug/mL each in 1, 2-dichloroethane, 1 mL/ampule

OQ Response Linearity Test Standard. Concentration In Solvent and Volume: In isooctane, 1 mL/ampule

NPI-350 Column Test Mix, Conc. In Solvent and Volume: 350 ug/mL each in methylene chloride, 1 mL/ampule

ISO-TM Column Test Mix, Conc. In Solvent and Volume: 500 ug/mL each in toluene, 1 mL/ampule

Nut Heater Block Retaining Aluminum construction for GC Split/Splitless Injector.

Hanger Column for 7890, 6890, 5890, and 5880A Gas chromatography.

Ferrule. Graphite Ferrule Ferrule ID:0.3 mm Fits Column ID:0.10-0.15 mm Material:Graphite Fitting Size:1/16in for Vu2 Union Connectors High-purity, high-density graphite. Stable to 450 C.Smooth surface and clean edges.

Ferrule GRAPHPACK 2M for Gerstel CIS 3 and CIS 4 PTV Inlets Fits Column ID:0.53 mm.

Post. Injector Mounting Posts and Parking for 7673/7683 Series Autosamplers for use with 5890/6890/7890 GCs

Cutter. Hi-Duty Tubing Specifically designed to cut 1/8in to 1-1/8in (4 mm to 28 mm) OD tubing. Easily cuts stainless steel, Monel alloy, and other hard-temper materials

Wheel. Replacement Cutting for Hi-Duty Tubing Cutter

Battery Replacement for Electronic Crimpers and Decapper.

Seal Piston PTFE with Graphite, Black Model number :1050, 1100, 1200.

Tape. ResTape PTFE Benefits and Uses:general gas service Color:Yellow PTFE Each roll is 1/2in x 260in Maximum temperature: 260 C. For threaded connections in a wide range of plumbing materials.

Autosampler Vial. Certified Autosampler Vial, Includes: Assembled clear 2.0 mL Vial with Marking Spot, Cap, Bonded PTFE/Silicone Slit Septa

Nut Heater Block Retaining Aluminum construction for GC Split/Splitless Injector.

Silicone Washers Replacement for FID Collector Housing for 5890/6890/7890 GCs.

Jet. Capillary Dedicated FID Replacement standard, high-temperature, or Siltek treated high-performance versions.For 6890/6850/7890 GCs

Nut 102-1 Swagelok Fitting Size:1/8in Material:Brass.

Nut 102-1 Swagelok Fitting Size:1/16in Material:Brass.

Nut 102-1 Swagelok Fitting Size:1/4in Material:Brass.

Ferrule Front 103-1 Swagelok Fitting Size:1/16in Material:Brass.

Ferrule Front 403-1 Swagelok Fitting Size:1/4in Material:Brass.

Ferrule Front 403-1 Swagelok Fitting Size:1/8in Material:Brass.

Ferrule Back 404-1 Swagelok Fitting Size:1/4in Material:Brass.

Plug 400-P Swagelok Fitting Size:1/4in Material:Brass.

Union 100-6 Swagelok Fitting Size:1/16in Material:Brass.

Union 100-6 Swagelok Fitting Size:1/4in Material:Brass.

Reducing Union 400-6-2 Swagelok fitting Size:1/4in to 1/8in Material:Brass.

Tee 100-3 Swagelok fitting Size:1/4in Material:Brass.

Male Connector 200-1-2 Swagelok fitting Size:1/4in to 1/4in NPT Material:Brass.

Male Connector 200-1-2 Swagelok fitting Size:1/8in to 1/8in NPT Material:Brass.

Female Connector 400-7-4 Swagelok fitting Size:1/4in to 1/4in NPT Material:Brass.

Female Connector 400-7-4 Swagelok fitting Size:1/4in to 1/4in NPT Material:Brass.

Nut 102-1 Swagelok Fitting Size:1/8in Material:Stainless Steel.

Plug 400-P Swagelok Fitting Size:1/16in Material:Stainless Steel.

Plug 400-P Swagelok Fitting Size:1/8in Material:Stainless steel.

Union 100-6 Swagelok Fitting Size:1/8in Material:Stainless steel.

Union 100-6 Swagelok Fitting Size:1/16in Material:Stainless steel.

Union 100-6 Swagelok Fitting Size:1/4in Material:Stainless steel.

Tee 100-3 Swagelok fitting Size:1/8in Material:Stainless steel.

Cross 200-4 Swagelok fitting Size:1/8in Material:Stainless steel.

Tube End Reducer 100-R-2 Swagelok Fitting Size:1/8in to 1/16in Material:Stainless Steel.

Male Connector 200-1-2 Swagelok Size:1/8in to 1/8in NPT Material:Stainless Steel.

Seal Replacement Inlet ID:0.8 mm Material:Gold-Plated with washer.

Nut. Fixing Nut for Capillary Column Split/Splitless Injector on TRACE, 8000, 8000 TOP & Focus SSL Made of high-quality stainless steel.

Revised 8270 Calibration Mix no.5.

Kit-Rinse/Drain 72IN 3/16 ID FUEL/LUB.

Kit-Rinse/Drain 84IN 1/8 ID FUEL/LUB.

Orange/Green 0. 38 mm I. D Pvc Package12.

Red/Red 1. 14 mm I. D Santoprene package 12 Red/Red 1. 14 mm Inner diameter Santoprene package 12.

Black/Black 0. 76mm Inner diameter Viton package12.

Orange/Blue 0. 25 Mm Inner diameter Pvc package12.

Red/Red 1. 14 Mm Inner diameter Viton package 12.

Balston Air Filter.

FIMS Cell, Complete.

Torsion Bar.

Spacer for 5Mm Path Length Pk/2.

Cell With Lid, Quartz 40/45Mm (9302705) Pk/2.

Tee Union Swagelock Only.

Germanium Crystal, 45 degrees.

Seal Holder PEK.

Flow Cell-Ser200 Fl Detector.

Nickel Free Reagent, EA1000, For PE 2400.

Brass Male Connector, Size: 1/4in to 1/4in NPT.

Sapphire Injector 1. 8 mm (Cassette) in PFA Base.

Filter Kit-DS Exhaust.

Column ANX 5um x 15cm PEEK.

Lamp - EXFO Omnicure S2000 UV.

Yellowith Blue 1.52 mm I.D. Pvc Pkg. 12, For Standard PVC Tubing.

Forepump Oil for TurboMass.

Ferrule. Gas chromatography Ferrule-Graphite/Vespel, 1/8X1/8inch, For Injectors and Detectors at atmospheric pressure, Pk/1

Al-Pans-Set.

Common Beam Depolarizer for Lambda 800/900 Spectrometer, For measurements with depolarized light. Wavelength range: 190 to2600 nm. Setup with stepper drive, Controlled by UV WinLabTMsoftware. Depolarization efficiency : 92%; Double-wedge quartz/Suprasil des.

Driver-Allen Ball for infrared spectroscopy.

Wrench Open End.

Bakeout Disk for (PID) Photoionization Detector.

Tubing-Bev-A-Line 1/2 X 1/16.

Filter Element Disposable (Carton of 12) for Optima 3X00 Series Axial (XL/SCX).

Kit-RF Shield Torch.

Kit-DMA8000 M4X6 SOC HD SCR Replmnt.

Material Pocket (Set of 1000).

Material Pocket (Set of 100).

Cloth Kit-DMA8000 (Pack of 100).

Cloth Kit-DMA8000 (Pack of 25).

Spectralon Disc assembly.

Cavro Autosampler Insulation B.

Stainless Steel Connector, Double Version, They are compatible with our Click-On Traps(1).

Stainless Steel Connector 1/8inch for Click on Traps (2).

Brass Connector 1/8inch for Click-on Traps (2/pack).

Face Packing Stator Peek.

Stator Face Ceramic Stainless Steel Valve.

Stator-Face Ceramic Peek Valve.

Lambda 900 Accessory Bd, For UV/Vis Spectroscopy.

Air Hose Assembly.

Hose Assembly Acetylene (Red).

Mantle Assembly.

High Temperature Transfer Line.

Window Blank Accessory.

KBr External Beam Upgrade Kit for Spectrum One FTIR. LHS Spectrum One systems without an external beam merging from the left-hand side of the instrument can be upgraded with this kit.

Spectrum RX1 Main PCB Accessory for Infrared Spectroscopy.

Sp100 Oil express Flow Cell.

S100 UATR 1 Bounce - Ge/Ge Top.

UATR Sample Position Plate 7mm available with 1 and 3 reflection.

UATR Sample Position Plate 3mm available with 1 and 3 reflection.

Grid Grat With Holder, 0.1mm for Infrared Spectroscopy.

Spider - ATR Accessory for Infrared Spectroscopy.

LN2 Large Dewar Kit.

Cass Mounted ATR Accessory.

ATR Imaging Accessory.

ATR Imaging Sample Carrier Std.

Spotlight Purge Enclosure.

ATR Objective GE Bonded.

Key Switch.

Spectrum One 100 400, 80SPEC.

Spectrum One 100 400, 10SPEC.

Diamond Miracle Top Plate.

VeeMax II Accy (Spectrum One 100 400).

Spectrum One Base plate-Specac for Infrared Spectroscopy.

Miracle SR ATR (Znse)-Top Plate for Infrared Spectroscopy.

Microscope External Beam Field.

Fibre Optic Reference Cap.

NPD/ECD Test Mix.

STD Rhodamine Cell.

STD 350Nm Cut Off Filter.

STD 290Nm Cut Off Filter.

Fast Filter accessory board and software, Requires a drive unit.

Stepper Motor/Ovoid Gearbox for Infrared Spectroscopy.

Adapter-DMA8000 Photo.

Dewar assembly-DMA8000 50 Liter LN2.

Line assembly-Dewar Dma8000 1 Lite.

TGA 7 Thermocouple Kit for thermal analysis.

Humidity sensor assembly (calibrated).

Steel Test Sample.

Alignment Fixture.

Tensile Spacer Set (Stainless Steel).

Tensile Clamp (Titanium).

Compression Insert (Titanium).

Automatic Cryo Kit Type B.

Kit-DMA8000 Measuring System.

Tray Assembly-Cora A 81 Vial for HPLC.

Series 200 Binary to Quaternary Upgrade Kit for HPLC.

Lee Mixer 250ul Tee for HPLC.

Cap Kit Quarternary Degasser for HPLC.

Initial System Kit Oxygen (960Rns) for thermal analysis.

PE 2400 Series Maintenance Kit for thermal analysis.

Twister Spray Chamber. With Aux Port & Helix, 50 mL cyclonic, Borosilicate glass, It features a central transfer tube which acts as a secondary particle separator, Helping separate larger aerosol particles from the sample. The position of the baffle ensure smooth draining and improved precision

Eluo HF Nebulizer Cleaner. Designed to efficiently deliver a cleanser through the nebulizer capillary to dislodge particle build-up and thoroughly clean it. This is effective for OpalMist, PolyCon and DuraMist nebulizers.

Apex-St PFA Microflow Nebulizer for ICP-MS.

Drain Lines 4mm O.D for ESI Autosampler.

Cover for ESI microtiter plates (5 Pack).

ESI Autosampler Micro Rack, 21 position (3x7).

ESI Autosampler Probe line holder.

Kit-Cyclonic Mount.

Nar Band MCT Smpl Cpld IR, 0.25mm (S.L.), For Infrared Spectroscopy.

Standard Transfer Line-TD.

Long Xfer Line-Td.

HP Lambda Linear Cell Changer.

Sipper Install Kit - L650/850/950 for UV/Vis Spectroscopy.

LMBDX - 10% Attenuator assembly for UV/Vis Spectroscopy.

Kit-600/Trmtx Transfer Line.

Turbomatrix TD Air Dryer.

Kit-PFA/Sapphire Sample Cass.

On/Off Pressure Regulator Upgrade Kit.

Braze assembly-9000 Packed Injector.

Acccupik Replacement Needle Kit (3).

Valve 6 Port Actuator.

Die assembly-Dsc High Pressure Pan.

Cassette Lens Upgrade Kit.

Final Filter Plastic Bowl Without Guard for 3100 Spectrometer.

Automatic Drain Kit.

Mouse Pad Inorganic.

Quartz Torch, Demountable, Short version for organic solvent.

Sample Pan and Cover. For Volatile Liquid or Solid Samples, Including Viscous Substances The Volatile Sample Sealer makes it easy to encapsulate volatile liquid and solid samples in our aluminum pans and covers. The pans have an internal volume of 20 uL.

Sample tube. Stainless Steel ATD Prepaced Sample Tubes, Sorbent: Chromosorb 106. The Chromosorb 106 is conditional at 240 C. recommends a maximum temperature of 250 C for this sample tube with a desorption temperature of 220 C.Pack 10

Sample tube. Stainless Steel ATD Prepaced Sample Tubes, Sorbent: Tenax GR 60/80, Pkg 10. The Tenax GR is conditional at 320 C. recommends a maximum temperature of 350 C for this sample tube with a desorption temperature of 300 C.

Sample tube. Stainless Steel ATD Prepaced Sample Tubes, Sorbent: Carbosieve Slll 60/80, Pkg 10. The Carbosieve S-lll is conditional at 350 C. PerkinElmer recommends a maximum temperature of 400 C for this sample tube with a desorption temperature of 330 C.

Sample tube. Stainless Steel ATD Prepaced Sample Tube, Sorbent: Carbopack B 60/80, Pkg 10. The Carbopack B is conditional at 350 C. PerkinElmer recommends a maximum temperature of 400 C for this sample tube with a desorption temperature of 330 C.

RF coil assembly, Includes fittings, self-aligning.

TurboMatrix/ATD 400/AutoSystem GC Interface Kit. Contains all necessary hardware for connecting the heated transfer line to either 1/8. Packed or capillary columns inside the oven of an AutoSystem (XL) GC or other gas chromatograph.

Adapter. Capillary Column Adapter converts 1/8in. Fitting to 1/16in Glass-lined tubing reduces background from polyimide coating in high temperature applications

AutoSystem Series GC External Igniter FID Catalytic Reactor Accessory, Easy Connection, Efficient Conversion, Excellent for Low Level CO and CO2 Detection

TCD/Flame Ionization Detector (FID) Series Operation kit. TCD/Flame Ionization Detector (FID) Series Operation Kit for Gas chromatography used to direct sample effluent from the TCD to the FID

D-Swafer platform is a micro-channel wafer technology, Providing Clarus 580 and 680 GC users with additional application flexibility, While delivering richer sample information, Increased sensitivity, Lower maintenance costs and increased sample throughput

D-Swafer platform is a micro-channel wafer technology, Providing Clarus 580 and 680 GC users with additional application flexibility, While delivering richer sample information, Increased sensitivity, Lower maintenance costs and increased sample throughput

D-Swafer Dean's Switch kit. D-Swafer Dean's Switch Kit for new Clarus GCs, With programmable pneumatic control (PPC) and includes: D-Swafer Dean's Switch, All required installation hardware and user guides

S-Swafer Splitter kit. S-Swafer Splitter Kit for new Clarus GCs, With programmable pneumatic control (PPC) and includes: S-Swafer Splitter, All required installation hardware and user guides

Swafer Micro-Channel kit. Swafer Micro-Channel Kit for Existing Clarus 680-600/580-500 GC with PreVent Currently Installed. If PreVent is already included in the GC configuration, This hardware kit provides the additional parts required to install a Swafer

Thermal Conductivity Detector (TCD) with Add-On Kit for Clarus 500 GC, 230V. Kit includes all necessary items to install the TCD into the instrument: detector, Heater, Sensor, Heater block, 1/6 in. Gas line, And flow controller pneumatics

Reactor Accessory. AutoSystem XL GC Auto-Ignite FID Catalytic Reactor Accessory. Easy Connection, Efficient Conversion, Excellent for Low Level CO and CO2 Detection. The catalytic reactor converts CO and CO2 to Methane conveniently and efficiently

Thermal Conductivity Detector (TCD) 1/8in. PPC Makeup Kit for AutoSystem Series GCs. Includes parts required to add PPC controlled make-up gas to an existing Thermal Conductivity Detector (TCD)

Complete Flame Photometric Detector (FPD) with PPC Add-On Kit for AutoSystem XL and Clarus 500 GC, 230V. The FPD is a highly sensitive and selective detector for both sulfur and phosphorus compounds

Gas Purifier for GC/MS.

Glass liner. Capillary splitless deactivated, 4mm I.D.x6.2mm O.D.x92.1mm, With deactivated wool, Application - Ideal for general purpose applications; Quartz Wool isused to fully vaporize the sample. Color coded orange on the liner.

Glass liner. Capillary splitless deactivated, 4mm, I.D.x6.2mm O.D.x92.1mm, With deactivated wool. Focus liner for split/splitless operation. Wipes the sample from the tip of the needle for complete transfer. Gives accurate and reproducible results. Performs well in splitless mode

Glass liner. PSS deactivated 2mm I.D.x4.0mm O.D.x86.2mm with deactivated wool 5/pk. Application - General Purpose applications. Liner designed for PSS injector. Narrow bore and quartz wool increase volatilization and reproducibility Color coded yellow with name on the liner.

Sheet-GCMS Micro -Mesh 8000 GRI.

Sheet-GCMS Micro -Mesh 6000 GRI.

Electronic Flowmeter. FlowMark NIST traceable calibration, Explosion-proof rating for flammable and explosive gases, Over range indicator, Auto shut-off feature, Use as a bench top or hand held unit, CE certified, Uses 2-AA batteries, Data output via USB port, Convenient storage case included.

Stainless Steel ATD Prepacked Sample Tube, Sorbent: Tenax GR60/80 Tube, Unconditioned, Pk10.

ATD Sample Tube. Stainless Steel Prepacked, Sorbent: Carbotrap 349(NIOSH 2549) Tube, Conditional at 350 degree C, The tubes approximate analyte volatility range is n-C3 to n-C16 and the typical analytes for the Carbotrap 349 are NIOSH Method 2549.

ATD Prepacked Sample Tube. Stainless Steel, Sorbent: Air Toxics Tube conditioned at 350 degree C. The tubes approximate analyte volatility range is n-C3 to n-C12 and the typical analytes for he Air Toxics are EPA TO-14 compounds.

ATD Sample Tube. Stainless Steel Prepacked, Sorbent: Carbopack B 60/80 conditional at 350 degree C, Carbopack C 60/80 Carbosieve Slll 60/80 conditional at 350 degree C, This tube is a multifunctional combination tube which allows detection of 3. Pk10.

Glass liner. PSS splitless deactivated 1.25mm I.D.x4.0 O.D.x86.2, With deactivated wool, For low volume sample analysis, Color coded BLUE on the liner, Capable of giving low and high boiling point discriminations. Small injections (0.5uL or less), Not suitable for 1uL injections.

Glass Empty Column, 2mm i.d, 1/4in o.d, 3 feet for AutoSystem GC series.

Glass Empty Column, 4mm i.d, 1/4in o.d, 6 feet for AutoSystem GC/ 8000 Series.

Stainless Steel Empty Column, 2mm i.d, 1/8in o.d, 12 feet for AutoSystem GC/ 8000 Series.

Stainless Steel Empty Column, 2mm i.d, 1/8in o.d, 6 feet for AutoSystem GC/ 8000 Series.

Stainless Steel Empty Column, 2mm i.d., 1/8in o.d, 3 feet for AutoSystem GC/ 8000 Series.

MARATHON gas chromatography septa 9mm diameter packed into blister packaging pack 50.

MARATHON gas chromatography septa 11mm diameter packed into blister packaging pack 50.

MARATHON gas chromatography septa 17mm diameter packed into blister packaging pack 48.

TR-GREEN gas chromatography septa 9mm diameter packed into blister packaging pack 50.

TR-GREEN gas chromatography septa 11mm diameter packed into blister packaging pack 50.

TR-GREEN gas chromatography septa 17mm diameter packed into blister packaging pack 48.

BTO gas chromatography septa 9mm diameter packed into blister packaging pack 50.

BTO gas chromatography septa 11mm diameter packed into blister packaging pack 50.

BTO gas chromatography septa 11. 5mm diameter packed into blister packaging pack 50.

BTO gas chromatography septa 12. 7mm diameter packed into blister packaging pack 48.

BTO gas chromatography septa 17mm diameter packed into blister packaging pack 48.

Sample Cylinder SST Pipe Cap, Sulfinert Treated, 1/4inch Female NPT.

Sample Cylinder SST Pipe Cap, Stainless Steel, 1/4inch Female NPT.

Sample Cylinder. Ultra-High Pressure, TPED, 4,350 psig, 316L Stainless steel, 500 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, 304L stainless steel; DOT rating to 1800 psig, 75 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, TPED, 4,350 psig, 316L, 500 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, 316L stainless steel; DOT rating to 5,000 psig, 500 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, TPED, 4,350 psig, 316L Stainless steel, 300 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, 316L stainless steel; DOT rating to 5,000 psig, 300 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, TPED, 4,350 psig, 316L Stainless steel, 150 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, 316L stainless steel; DOT rating to 5,000 psig, 150 cc, 1/4inch Female NPT Ends

Cylinder Valve. Alta-Robbins Sample Cylinder Valve, Stainless Steel & Sulfinert Treated, 1/4inch Male NPT x 1/4inch Male Compression, 3,500 psig, with Dip Tube 1-1/2 inches, Large, durable, Kel-F seat ensures leak-free operation, -40dergee C to 120dergee C

Sample Cylinder. Swagelok Sample Cylinder, High Pressure-TPED, 1,450 psig, Stainless Steel, Sulfinert Treated, 2,250 cc, 1/4inch female NPT threads on both ends, 304L

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, TPED, 1450 psig, 304L, 150 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, TPED, 1450 psig, 304L, 75 cc, 1/4inch Female NPT Ends

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 2.0 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 2-1/4 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Stainless steel, 1/4inch NPTx1/4inch NPT with Dip Tube 3.0 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Stainless steel, 1/4inch NPTx1/4inch NPT with Dip Tube 3-3/8 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Stainless steel, 1/4inch NPTx1/4inch NPT with Dip Tube 5-1/4 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Stainless steel, 1/4inch NPTx1/4inch NPT with Dip Tube 2-3/4 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Stainless steel, 1/4inch NPTx1/4inch NPT with Dip Tube 3-3/8 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Replacement Swagelok SS4H Bellows sealed Valve, 1/4inch, 2-port, Stainless Steel.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 1,450 psig, 304L, 500cc, 1/4inch Female NPT Ends

Sample Cylinder. High Pressure, Sulfinert treated, TPED, 1,450 psig, 304L, 300cc, 1/4inch Female NPT Ends

Sample Cylinder, High Pressure, Stainless Steel, 5000 psig, 304L, 500cc, 1/4inch Female NPT Ends.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 4350 psig, 304L, 300cc, 1/4inch Female NPT Ends

Sample Cylinder, High Pressure, Stainless Steel, 5000 psig, 316L, 300cc, 1/4inch Female NPT Ends.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 4350 psig, 316L, 150cc, 1/4inch Female NPT Ends

Sample Cylinder, High Pressure, Stainless Steel, 5000 psig, 316L, 150cc, 1/4inch Female NPT Ends.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 1,450 psig, 304L, 2250cc, 1/4inch Female NPT Ends

Sample Cylinder, High Pressure, Stainless Steel, 1,800 psig, 304L, 2250cc, 1/4inch Female NPT End.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 1,450 psig, 304L, 1000cc, 1/4inch Female NPT Ends

Sample Cylinder, High Pressure, Stainless Steel, 1,800 psig, 304L, 1000cc, 1/4inch Female NPT End.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 1,450 psig, 304L, 500cc, 1/4inch Female NPT Ends

Sample Cylinder, High Pressure, Stainless Steel, 1,800 psig, 304L, 500cc, 1/4inch Female NPT Ends.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 1,450 psig, 304L, 300cc, 1/4inch Female NPT Ends

Sample Cylinder, High Pressure, Stainless Steel, 1,800 psig, 304L, 300cc, 1/4inch Female NPT Ends.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 1,450 psig, 304L, 150cc, 1/4inch Female NPT Ends

Sample Cylinder, High Pressure, Stainless Steel, 1,800 psig, 304L, 150cc, 1/4inch Female NPT Ends.

Sample Cylinder. High Pressure, Stainless Steel, TPED, 1,450 psig, 304L, 75cc, 1/4inch Female NPT Ends

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 2-1/4 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 2-3/4 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 2.0 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 2-1/2 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 1.0 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 3-7/8 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 4-5/8 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 4-1/2 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Sample cylinder 316 end pipe plug, Material: Sulfinert treated, Fittings: 1/4in male NPT.

Sample cylinder 316 end pipe plug, Material: Stainless steel, Fittings: 1/4in male NPT.

Handle. Sample cylinder carrying handle, 304 stainless steel for 3.5in & 4in OD cylinders (Includes handle and two attachment rings)

Handle. Sample cylinder carrying handle, 304 stainless steel for 1.9in & 2in OD cylinders (Includes handle and two attachment rings)

Fits, replacement rupture discs, Material: stainless steel, Pressure rating: 2850psig, DOT.

Rupture disc tee. Fittings: 1/4in male NPT x 1/4in female NPT, Material: sulfinert treated, sulfinert treated, 2850psig

Rupture disc tee. Fittings: 1/4in male NPT x 1/4in female NPT, Material: Stainless steel, sulfinert treated, 2850psig

Fits, replacement rupture discs, Material: stainless steel, Pressure rating: 1,800 psig, DOT.

Rupture disc tee. Fittings: 1/4in male NPT x 1/4in female NPT, Material: sulfinert treated, sulfinert treated, 1800 psig

Rupture disc tee. Fittings: 1/4in male NPT x 1/4in female NPT, Material: Stainless steel, sulfinert treated, 1800 psig

Sample Cylinder Valve. Sulfinert treated, 1/4inch NPTx1/4inch NPT with Dip Tube 3-3/8 inches, Large, durable, Kel-F seat ensures leak-free operation, Temperature range: -40dergee C to 120dergee C

Linergold splitless precision liner with wool 5.0x8.0x105mm pk1.

Linergold precision liner with wool 5.0x8.0x105mm pk5.

Linergold straight liner 5.0x8.0x105mm pk5.

Linergold baffled PTV liner 2.0x2.75x120mm pk1.

Linergold splitless liner 5.0x8.0x105mm pk5.

Linergold splitless liner 3.0x8.0x105mm pk5.

Linergold split liner 1.0x6.3x78.5mm pk25.

Linergold split liner 1.0x6.3x78.5mm pk5.

Linergold precision liner with wool 4.0x6.3x78.5mm pk25.

Linergold precision liner with wool 4.0x6.3x78.5mm pk5.

Linergold splitless liner with double taper 4.0x6.5x78.5mm pk25.

Linergold splitless liner with double taper 4.0x6.5x78.5mm pk5.

Linergold splitless liner with single taper, wool 4.0x6.5x78.5mm pk25.

Linergold splitless liner with single taper, wool 4.0x6.5x78.5mm pk5.

Linergold splitless liner with single taper 4.0x6.5x78.5mm pk25.

Linergold splitless liner with single taper 4.0x6.5x78.5mm pk5.

Linergold splitless straight liner 4.0x6.3x78.5mm pk25.

Linergold splitless straight liner 4.0x6.3x78.5mm pk5.

Linergold straight liner with wool 4.0x6.3x87.5mm pk25.

Linergold straight liner with wool 4.0x6.3x87.5mm pk5.

Tubing, Fused Silica 0.675mm OD x 530um ID, 100m length.

Tubing, Fused Silica 0.48mm OD x 320um ID, 150m length.

Tubing, Fused Silica 0.375mm OD x 250um ID, 150m length.

Tubing, Fused Silica 0.375mm OD x 200um ID, 100m length.

Tubing, Fused Silica 0.375mm OD x 180um ID, 50m length.

Tubing, Fused Silica 0.375mm OD x 150um ID, 50m length.

Tubing, Fused Silica 0.35mm OD x 100um ID, 50m length.

Tubing, Fused Silica 0.35mm OD x 75um ID, 50m length.

Tubing, Fused Silica 0.35mm OD x 50um ID, 50m length.

Tubing, Fused Silica 0.35mm OD x 25um ID, 50m length.

Tubing, 304 Stainless Steel, 3/16in OD(4.7625 mm) x 0.1475in ID(3.7465 mm) 50ft.

Tubing, 304 Stainless Steel, 1/8in OD(3.175mm) x 0.085in(2.159 mm) GC Grade, 50ft.

Tubing, Aluminum, 1/4in OD x 0.190in ID 50ft.

Tubing, Polytetrafluoroethylene, 1/4in(6.35 mm) OD x 0.125in(3.175 mm) ID 25ft.

Tubing, Polytetrafluoroethylene, 1/8in(3.175 mm) OD x 0.095in(2.413 mm) ID 25ft.

Tubing, 304 Stainless Steel, 1/4in OD(6.35 mm) x 0.210in ID(5.334 mm) GC Grade 50ft.

Tubing, Sulfur ready stainless steel, 1/8inch OD(3.175mm) x 0.085inch ID(2.159 mm), GC Grade 50ft.

Tubing, Copper, 1/4inch OD X 0.190inch ID Precleaned GC Grade 50ft.

Tubing, Copper, 1/8inch OD X 0.065inch ID Precleaned GC Grade 50ft.

Tubing, Nickel, 1/4inch OD(6.35mm) x 0.190inch ID(4.83mm) 50ft.

Plug only (white) for N0777071 15 mL Graduated Round Bottom Tubes (bulk).

Category