• 0
Shop Products $

Spare Stainless Steel Shelf 6.5. with support rails for VWR Symphony 6.5 CO2 Incubators.

Spare Stainless Steel Shelf 5.3. With support rails for VWR Symphony 5.3 CO2 Incubators.

Support Frame for VWR Symphony 8.5 CO2 Incubators. 31W x 26D x 8H.

Support Frame for VWR Symphony 6.5 CO2 Incubators. 26W x 24D x 3H.

Drain Water Pump for Humidified 6020 Series Chambers. For 230V, 50/60 Hz models.

Drain Water Pump for Humidified 6020 Series Chambers. For 115V models.

Additional 2in Access Port for 6020 Series Chambers. Location to be specified at time of order.

Outer Door Lock. for 6020 Series Chambers.

UV Germicidal Lamp for Humidified 6020 Series Chambers. Deactivates microorganisms in-line with humidity water supply. For 230V, 50/60 Hz units.

UV Germicidal Lamp for Humidified 6020 Series Chambers. Deactivates microorganisms in-line with humidity water supply. For 115V units.

Heavy-Duty Perforated Shelf Kit to Replace Standard Shelving. on 6020 Series Chambers.

Heavy-Duty Stainless Steel Perforated Shelf Kit. Includes 2 shelf tracks.

Stainless Steel Reinforced Perforated Shelf Kit. Includes 2 shelf tracks.

Lexan Inner Door Kit for 6020 Series Chambers. Divides the chamber into 4 equally sized compartments. Minimizes chamber interruption during a door opening.

Rust Inhibitor. Used with any Symphony Water Jacket Incubator. Rust Inhibitor should be used anytime the water jacket is emptied or every two years.

Tubing and Fitting Kit. To connect Condensate Recirculating System to two chambers.

6-Door Gas Tight Screen. 6 interior glass doors for separate access for heracell 240 and 240i incubators (service installed)

External Gas Tank Monitor. Automatically switches gas tanks for water jacket incubators 120 v

Data Download And Logging Software Kit With Usb Cable.

Ir Co2 Gas Tester, With Travel Case, For Co2 Incubators, 100-240V, 50/60Hz.

Support Frame With Castors For Single Chamber, 780 Mm High.

Support Frame Without Castors For Single Chamber, 780 Mm High.

Support Frame Without Castors For Double Chamber, 200 Mm High.

Stack Adapter For Heracell 240.

Set Of 4 Heratrays, 1/2 Width, In Copper.

Set Of 4 Heratrays, 1/4 Width, In Copper.

Set Of 3 Heratrays, 1/3 Width, In Copper.

Set Of 4 Heratrays, 1/2 Width, In Stainless Steel.

Set Of 4 Heratrays, 1/4 Width, In Stainless Steel.

Set Of 3 Heratrays, 1/3 Width, In Stainless Steel.

Additional Shelf, Solid Copper, Half-Width, With 2 Support Rails.

Additional Shelf, Stainless Steel, Half-Width, With 2 Support Rails.

1 Solid Copper Strengthened Shelf, With 2 Support Rails.

1 Stainless Steel Strengthened Shelf, With 2 Support Rails.

Additional Shelf, Solid Copper, Full-Width, With 2 Support Rails.

Additional Shelf, Stainless Steel, Full-Width, With 2 Support Rails.

O2 Gas Regulator, 2-Stage For Gas Tank.

N2 Gas Regulator, 2-Stage For Gas Tank.

Heraline, Digital To Analog Signal Convertor, 0-1 Volt.

Heraline, Digital To Analog Signal Convertor, 4-20 Milliamps.

Set Of 3 Heratrays In Solid Copper.

Set Of 3 Heratrays In Stainless Steel (Autoclaveable).

Additional Shelf, Solid Copper, Full-Width, With 2 Support Rails.

Support Frame With Drawers For Single Chamber. 780 mm high with 3 drawers complete with 4 swivel locking castors

Support Frame For Double Chamber, 200 Mm High (Without Castors).

Stacking Bracket F/Innova Co14.

Extra Shelf. Non-Perforated, CO-14

4 Position Shelf Rack Co-14. 4 position shelf rack, innova co-14

6 Position Shelf Rack. Innova CO-48

Extra Shelf. Perforated, Innova CO-48

Extra Shelf. Non-perforated, Innova CO-48

In-Line Pressure Regulator.

Automatic Co2 Change Over Unit.

Stainless Steel Perforated Shelf Kit For 6010 Series Chambers. Includes two shelf tracks.

Heavy-Duty Perforated Shelf Kit to Replace Standard Shelving on 6040 Series Chambers.

Lexan Inner Door Kit For 6040 Series Chambers. Divides the chamber into 5 equally sized compartments. Minimizes chamber interruption during a door opening.

Set of connection cables and interface converter RS 232/RS 422. For connection to plug distributor with 10 interfaces or for only one unit. 115v

Set of connection cables and interface converter RS 232/RS 422. For connection to plug distributor with 10 interfaces or for only one unit. 230v

Co2 Gas Regulator, 2-Stage, For Gas Tank.

CO2 Tank Switchover System. For use with RB 150 air-jacketed CO2 incubator (82013-762). This optional system enables the incubator to automatically switch to a backup tank when main CO2 tank is empty.

Support Frame. For VWR Symphony 5.3 CO2 Incubators 25inW x 24inD x 8inH.

Support Frame without Casters. Height: 78cm. For use with RB 150 air-jacketed CO2 incubator (82013-762).

CERTIFICATE CALIBRATION CB - 8012-0228

Accessories for CO2 Incubators, CB and CBS Series, Binder - 9051-0028, Base with casters

PROBE TEMPERATURE 5MM TIP - P0628-7881

PROBE TEMPERATURE 100MM TIP - P0628-7880

REGULATOR AND TUBING F CALIBRATION GAS - P0628-7850

SOFTWARE PC DOWNLOAD ANALYZER DATA MGR - P0628-7840

PROBE RH FLYING LEAD - P0628-7820

ANALYZER USB LEAD - P0628-7810

GAS TANK SWITCHER CO2 FOR MCO-170-230 - MCO-21GCP-PW

LOCK DOOR-MOUNT ELECTRONIC - ELMSKPHRFKIT

LOCK KEYPAD AND PROXIMITY CARD - ELPRKPHRFRKIT

LOCK AND KEYPAD ELECTRONIC - ELKPHRFRKIT

PLUG TWIST LOCK NEMA L5-20 - TWISTLOCK110

KIT MOUNTING FOR MCO-80ICL-PA - MCO-80RBS-PW

SYSTEM WATER SUPPLY AUTOMATIC - MCO-80AS-PW

KIT SHELF FOR MCO-80ICL - MCO-80ST-PW

KIT DOOR 5 INNER FOR MCO-80ICL - MCO-80ID-PW

KIT DOOR INNER FOR MCO170AIC - MCO-170ID-PW

SHELF REINFORCED MCO230AIC - MCO-230RT-PW

SHELF REINFORCED MCO170 SERIES - MCO-170RT-PW

KIT UV DECONTAMINATION MCO80ICL - MCO-80UVS-PA

SWITCHER GAS TANK CO2 BUILT-IN - MCO-80GC-PW

REGULATOR GAS TANK 2-STAGE N2 - MCO-100N

BASE ROLLER FOR MCO-50M AND MCO-50AICL - MCO-5RB-PW

ROLLER BASE FOR CO2 INCUBATORS - MCO-50RB-PW

STAND UNIVERSAL STACKING UPPER FRAME - 6731070158

INCUBATOR 1X SHELF FOR 170L INCUBATOR - 6731070123

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2122, Door lock, lockable door handle

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2121, Door lock, lockable door handle

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2120, Access port with silicone plug, 50 mm, left

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2119, Access port with silicone plug, 50 mm, right

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2118, Access port with silicone plug, 100 mm, left

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2117, Access port with silicone plug, 100 mm, right

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2116, Access port with silicone plug, 100 mm, top

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2115, Access port with silicone plug, 50 mm, top

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2114, Access port with silicone plug, 30 mm, top

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2113, Access port with silicone plug, 30 mm, left

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2112, Access port with silicone plug, 30 mm, right

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2110, Calibration certificate, temperature, temperature measurement includes certificate and 27 measuring points at specified temperature

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2109, Calibration certificate, temperature, temperature measurement includes certificate, 15- 18 measuring points at specified temperature

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2108, Calibration certificate, temperature, temperature measurement includes certificate, 9 measuring points at specified temperature

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2107, Calibration certificate, expanded, for temperature, for extending the measurement in center of chamber to include another test temperature

Accessories for Cooled Incubators with Environmentally Friendly Thermoelectric Cooling, KB ECO Series, Binder - 8012-2106, Calibration certificate, temperature - for temperature, measurement in center of chamber at specified temperature

SET SHELF SYSTEM GREX VIOS 250 - 50164781

INCUBATOR 250 CR CO2 FLOOR STAND 780MM - 50162771

INCUBATOR 160 CR CO2 FLOOR STAND 780MM - 50162104

INCUBATOR 250 CR CO2 STACK ADAPTER PLATE - 50162632

INCUBATOR 160 CR CO2 STACK ADAPTER PLATE - 50162145

INCUBATOR 250CR CO2 LOW ROLLER BASE 76MM - 50162731

INCUBATOR 160CR CO2 LOW ROLLER BASE 76MM - 50161859

Accessories for AIREAâ„¢ Dry-Wall Stackable CO2 Incubator, Crystal Technologies - CIA24, Shelf for CI-191CXA CO2 incubator

Accessories for AIREAâ„¢ Dry-Wall Stackable CO2 Incubator, Crystal Technologies - CIA19, Remote monitoring kit for CI-191CXA CO2 incubator

Accessories for AIREAâ„¢ Dry-Wall Stackable CO2 Incubator, Crystal Technologies - CIA15, CO2 HEPA Inlet Filter for CI-191CXA CO2 incubator

Accessories for AIREAâ„¢ Dry-Wall Stackable CO2 Incubator, Crystal Technologies - CIA13, Chamber HEPA filter for CI-191CXA CO2 incubator

KIT UV DECONTAMINATION MCO170 SERIES - MCO-170UVS-PA

WALL INSTALL PREP FOR CLEN304 7401-25/33 - WALL306

WALL INSTALL PREP FOR CLEN303 7400-25/33 - WALL305

WALL INSTALL PREP FOR 7401-25/33 - WALL304

WALL INSTALL PREP FOR 7400-25/33 - WALL303

KIT WALL TRIM FOR 33CF - WALL302

KIT WALL TRIM FOR 25CF - WALL301

DOOR LATCH W/ LOCK FOR CLEN UPGRADE - LTCH304

DOOR LATCH W/O LOCK FOR CLEN UPGRADE - LTCH303

DOOR COVER SS 33CF FOR CLEN304 - DOOR322

DOOR COVER SS 25CF FOR CLEN303 - DOOR321

CLEANROOM UPGRADE FOR 7400-33 AGGRESSIVE - CLEN304

CLEANROOM UPGRADE FOR 7400-25 AGGRESSIVE - CLEN303

CLEANROOM UPGRADE FOR 7400-33 MODERATE - CLEN302

CLEANROOM UPGRADE FOR 7400-25 MODERATE - CLEN301

Oven Accessories, Cole-Parmer - 52411-55, Shelf for 91 L programmable vacuum oven

Oven Accessories, Cole-Parmer - 52411-54, Shelf for 53 L programmable vacuum oven

Oven Accessories, Cole-Parmer - 52411-53, Shelf for 24 L programmable vacuum oven

Oven Accessories, Cole-Parmer - 52411-50, Shelf for 50 L botanical vacuum oven

Oven Accessories, Cole-Parmer - 52411-49, Shelf for 25 L botanical vacuum oven

Oven Accessories, Cole-Parmer - 52411-45, Shelf for 136 L mechanical/forced convection drying oven

Oven Accessories, Cole-Parmer - 52411-44, Shelf for 80 L mechanical/forced convection drying oven

Oven Accessories, Cole-Parmer - 52411-43, Shelf for 50 L mechanical/forced convection drying oven

Oven Accessories, Cole-Parmer - 52411-42, Shelf for 30 L mechanical/forced convection drying oven

Oven Accessories, Cole-Parmer - 52411-41, Shelf for 16 L mechanical/forced convection drying oven

Oven Accessories, Cole-Parmer - 52411-39, Shelf for 140 L gravity/natural convection drying oven

Oven Accessories, Cole-Parmer - 52411-37, Shelf for 56 L gravity/natural convection drying oven

Oven Accessories, Cole-Parmer - 52411-38, Shelf for 96 L gravity/natural convection drying oven

Oven Accessories, Cole-Parmer - 52411-36, Shelf for 27 L gravity/natural convection drying oven

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - DL50-0020, Extended warranty, 1 year

Accessories for CO2 Incubators, CB and CBS Series, Binder - 9051-0038, Stacking adapter

Accessories for CO2 Incubators, CB and CBS Series, Binder - 9051-0043, Base with casters

Accessories for APT-COMâ„¢ 3 Data Control System, Binder - 8012-0665, Interface converter USB / RS422

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 9051-0035, Stacking adapter C/CB 170

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-1918, Copper interior fittings

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-2167, Shelf, perforated, stainless steel

Accessories for CO2 Incubators, CB and CBS Series, Binder - 8012-2058, Perforated stainless steel shelf, with divided door

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-1997, Copper interior fittings (2 shelves and a water pan)

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-2183, Shelf, perforated

SHELF PERFORATED FOR DIVIDED INNER DOOR - 8012-1888

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-1592, Calibration certificate, temperature - temperature measurement includes certificate and 27 measuring points at a specified temperature

CALIBRATION CERTIFICATE 27POINT FOR C170 - 8012-1591

Accessories for CO2 Incubators, CB and CBS Series, Binder - 8012-1571, Temperature calibration certificate includes 15 – 18 measuring points at specified temperature

CALIBRATION CERTIFICATE 15-18 PT F/C 170 - 8012-1570

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-1550, Calibration certificate, temperature - temperature measurement includes certificate and 9 measuring points at a specified temperature

CALIBRATION CERTIFICATE 9 POINT F/C170 - 8012-1549

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-1235, Calibration certificate, temperature and CO2 - for temperature and CO2, temperature measurement in center of chamber, CO2 measurement performed using test gas at 37 °C and 5 % CO2

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-1132, Calibration certificate, temperature - temperature measurement in center of chamber at specified temperature

CALIBRATION CERTIFICATE TEMP 1PT FOR C - 8012-1131

CALIBRATION CERTIFICATE EXPANDED TEMP C - 8012-1112

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 8012-2166, Perforated stainless steel shelf

BASE WITH CASTER F/M240 HEATING CHAMBER - 9051-0034

BASE WITH CASTER F/M115(HEATING CHAMBER) - 9051-0033

H2O2 sterilization prep, factory installed. For use in 7404-10 Series incubators. Includes H2O2 sterilization module connections, upgraded system wiring, and control software & hardware. STER301 H2O2 sterilization module sold separately

Noise suppression kit for heatlless dryer DRYR109 & DRYR301.

Stacking stand, upper frame, for CellXpert C170/C170i.

Stacking stand, lower frame, with castors, For CellXpert C170/C170i.

Cell Locker with stainless steel tray, membrane filters, and transport cover, offering enhanced protection for valuable cultures, Volume: 9 each T-75 cell culture flasks, 20 each 6-well plates, or 24 each 96-well pla

Replacement membrane filters for the Cell Locker, package of 2.

Cell Locker with copper tray pack of 6. Cell Locker with copper tray, membrane filters, and transport cover, offering enhanced protection for valuable cultures, Volume: 9 each T-75 cell culture flasks, 20 each 6-well plates, or 24 each 96-well plates, pro

Cell Locker with ss tray Pack/6. Cell Locker with stainless steel tray, membrane filters, and transport cover, offering enhanced protection for valuable cultures, Volume: 9 each T-75 cell culture flasks, 20 each 6-well plates, or 24 each 96-well plates, p

Cell Locker with copper tray, membrane filters, and transport cover, offering enhanced protection for valuable cultures, Volume: 9 each T-75 cell culture flasks, 20 each 6-well plates, or 24 each 96-well plates, protection fo

Humidity Tray/Pan, copper, for Galaxy 170 R / Galaxy 170 S.

Humidity Tray/Pan, Stainless Steel, for Galaxy 170 R / Galaxy 170 S.

Additional Shelf, Perforated, For Galaxy 14 S Incubators.

Additional Humidity Tray, Material: Stainless Steel, For 14 liter incubators.

Additional Humidity Tray, Material: Stainless Steel, For 48 liter incubators.

Lower and upper stacking frame, With casters, For Galaxy 48 R / Galaxy 48 S CO2 incubators, shelves, pans and stacking stand

Shelf rack, For S41i incubator shaker.

Rack, Stacking for Co2 Water Jacketed Incubator.

Interior glass doors 6. Interior glass doors-6, Gas tight screen, 250l QI, For separate access for Heracell 250i with stainless steel or copper inner casing, Field installed

Hydrogenperoxide 35Percent H2O2 35Ml Pk5, Hydrogen Peroxide, 5/pack 35 ml container of 35% H2O2. For use with Sterilization Vapor Hydrogen Peroxide

Hydrogen Peroxide 35Percent H2O2 35Ml, Hydrogen Peroxide, single 35 ml container of 35% H2O2. For use with Sterilization Vapor Hydrogen Peroxide.

Sterilization Vapor Hydrogen Peroxide. Vaporized Hydrogen Peroxide Sterilization Module. Complete with Condition, Sterilization, and Inactivation phases, less than 40 minutes overall. For use with 7410 and 7411 Series CO2 incubators.

Analog Output Temp/Co2/O2/Rh, Universal Analog Output (0-5V, 4-20mA) for use with Caron 7411 series incubators. Provides four connections for monitoring temperature, humidity, CO2, and O2. Can be retro-fitted in the field.

VWR Usb Calibration Drive Allows The User To Calibrate The Unit For Up To 5 Separate Temperatures Using An External Temperature Device.

VWR Cooling Tube, Made Of Copper And Is Used To Cool Down The Units Oven In Between Sample Melts.

VWR Capilary Tubes, 100Mm Long, I.D. 1.2Mm, Clear Glass Closed On One End.

Support frame symphony 6.5.

Caster platform for incubator.

Stacked CO2 Incubator Tubing Kit Assembly. Includes inline filter, adapters, and a intin fitting.

Optional CO2 gas regulator, regulates pressure from the gas cylinder to the incubator, 100 to 240V, 50-60Hz, 75W, Temp. Range: Ambient -10 deg to 55 deg C, CO2 Range: 0 to 20%, CO2 Sensor: Dual beam IR, CO2 Accuracy: +/-0.1% at 5%, Humidity: 70 to 80%, capacity: 20L

Economy Digital and Analog Incubators - 10-140E

SOLID STATE RELAY 45A F/OVEN

Shelf with Brackets. For use in Automatic CO2 Incubators, Water-Jacketed (Series 5400 and 6000) and Automatic Three-Gas CO2 Incubators, Water-Jacketed (Series 7000).

Condensate Recirculators, Caron Products - CRSY102-1, Condensate Recirculating System

BLOWER WHEEL

NAPCO IR CO2 BRD KIT

Reinforced shelf Stainless steel. Reinforced shelf, with 2 support rails, Stainless steel, for Steri-Cycle i250 CO2 Incubator, customer installed

Reinforced shelf copper. Reinforced shelf, with 2 support rails, Copper, for Steri-Cycle i250 CO2 Incubator, customer installed

Reinforced shelf stainless steel. Reinforced shelves, with 2 support rails, factory fitted, 3 solid stainless steel for Steri-Cycle CO2 Incubator i250

Reinforced shelf Copper. Reinforced shelves, with 2 support rails, factory fitted, 3 solid Copper for Steri-Cycle CO2 Incubator i250

Roller Base for MCO-230AIC CO2 incubator.

Stacking adapter 165L on stericycle 184L, to previous generation Steri-cycle CO2 incubators to dissipate heat during Steri-Run

Stacking adapter two 165L Model. Stacking adapter for two 165L Model, to Heracell 150i CO2 incubators, dissipate heat during Steri-Run

Stacking adapter Heracell VIOS 160I, to Heracell 150i CO2 incubators, dissipate heat during Steri-Run

Roller Base. VWR Roller Base for DH models: with 2 locking casters, 2 leveling feet, 23/4 in, Roller Dolly (heavy-duty, powder coated steel base) with dual-wheel, swivel locking casters and levelling feet, supports one or two (stacked) incubators, raises unit 3.0in (7.6cm) off the floor

Stacking adaptor configured to stack a Heracell VIOs on top of Heracell 240i.

Support frame for single chamber, 780 mm high (without casters).

Support frame for double chamber, 200 mm high (without casters).

Support frame for double chamber, 172 mm high (with casters).

Door. Glass door, having O2 control 5% - 90% with gas tight screen, 1/2 width shelves, factory installed, 6 doors

Door. Glass door, having O2 control 1% - 21% with gas tight screen, 1/2 width shelves, factory installed, 6 doors

Door. Interior glass doors, gas tight, for separate access for Heracell 250i with stainless steel or copper inner casing, factory installed, 6 doors

Half shelf system, Split Shelf, 6 half-width in place of 3 full -width, Material: copper.

Half shelf system, Split Shelf, 6 half-width in place of 3 full -width, Material: stainless steel.

Data output, 4-20mA for remote monitoring for Heracell VIOS and Forma Steri-cycle models, qualified service installation

Internal gas guard for CO2/O2/N2 field installed kit for Heracell VIOS and Forma Steri-cycle models, qualified service installation

Middle/Upper stacking frame for stacking two Galaxy 170R/S incubator.

Analogue Self Powered Output module, 4-20mA, for Temperature and CO2 incubator.

Step down 5psi in line pressure regulator for MCO-19/KM-CC17 series.

Gas tank regulator, 2-stage, CO2 (max 15 PSI) with barb fitting for all CO2 incubator.

Gas calibration kit for MCO 19 series.

Hydrogen Peroxide reagent specially fomulated for Incubator Co2 Cell IQ Touch 165L.

Atomizer for Incubator Co2 Cell IQ Touch 165L.

Stacking Spacer for Incubator Co2 Cell IQ Touch 165L.

Stacking Kit for Incubator Co2 Cell IQ Touch 165L.

Shelf for Incubator Co2 Cell IQ Touch 165L.

Electric Door Lock for Incubator Co2 Cell IQ Touch 165L.

H2O2 Control Board for Incubator Co2 Cell IQ Touch 165L.

Roller base for Incubator Co2 Cell IQ Touch 165L.

Stainless steel external outer casing for the 160i CO2 incubators factory installed.

Support frame for single chamber, 780 mm high (without castors) for 160L.

Support frame for double chamber, 200 mm high (without casters) for 160L CO2 incubators.

Support frame for double chamber, 185 mm high (with casters) for 160L CO2 incubators.

Door, solid insulated (no glass) for 934l (33cubic feet) series chambers/incubators.cannot be used with door307. factory installed at the time of order or can be retro-fitted in the field.

Door cover, light tight, for 934 l (33cubic feet) series chambers/incubators (with glass). factory installed at the time of order or can be retro-fitted in the field.

Door, solid insulated, (no glass) for 708 l (25cubic feet) series chambers/incubators. factory installed at the time of order or can be retro-fitted in the field.

Light tight door cover, for 708 l (25cubic feet) series chambers/incubators (with glass).

Water pan. Elevated humidity with water pan, for carbon dioxide incubators, model: 7402-25-2, 7402-33-2, 7403-25-2, & 7403-33-2, 230v 60Hz. factory installed at the time of order or can be retro-fitted in the field.

Water pan. Elevated humidity with water pan, for carbon dioxide incubators, model: 7402-25-1, 7402-33-1, 7403-25-1, & 7403-33-1 115v 60Hz. factory installed at the time of order or can be retro-fitted in the field.

Water pan. Elevated humidity with water pan, for carbon dioxide incubators, model: 7401-25-3 & 7401-33-3, 230v 50Hz. factory installed at the time of order or can be retro-fitted in the field.

Water pan. Elevated humidity with water pan, for carbon dioxide incubators, model: 7401-25-2 & 7401-33-2, 230v 60Hz. factory installed at the time of order or can be retro-fitted in the field.

Water pan. Elevated humidity with water pan, for carbon dioxide incubators, model: 7401-25-1 & 7401-33-1, 115v 60Hz. factory installed at the time of order or can be retro-fitted in the field.

Control, earth-friendly gvapor (steam-free humidity) control from ambient to 95% with display/readout for model: 7401, 7402, 7403 series carbon dioxide incubators, 708l (25cubic feet) & 934l (33cubic feet) capacities.

Water pan. Elevated humidity with water pan, for carbon dioxide incubators, model: 7402-25-3, 7402-33-3, 7403-25-3, & 7403-33-3, 230v 50Hz. factory installed at the time of order or can be retro-fitted in the field.

Category