Rxreliance

Optifix Taper. 29mm PTFE taper. For use with Optifix dispensers. Fits standard screw neck reagant bottles and containers. Sizes based on ID measurements.

Optifix Taper. 24mm PTFE taper. For use with Optifix dispensers. Fits standard screw neck reagant bottles and containers. Sizes based on ID measurements.

Multidrop Combi Reagent Dispenser, Thermo Scientific. Dispenser precisely dispenses volumes of 05-2500uL in 0.5 and 5uL increments, all reagent lines can be backflushed into the reagent bottle to minimize the loss of expensive reagents, dispensing cassette is detachable.

Long small tube plastic tip dispensing cassette. For all Thermo Scientific Mutlidrops.

Dose It Peristaltic Pump. For Connection Of Second Vacuboy Hand Operator

Benchtop Switch. Consists Of: Vacusip Hand Operator, Silicone Tubing (1.2 M And 0.22 M), 1 Filter (Non Sterile, 0.45Um)

Service Calibration Stickers. Calibrex 525/530 Service Calibration Stickers, 25/Pk

CLAMP CAD. V-JAW BURET - H-8012

Washer PTFE Pre-Load.

Reagent filter, small long-tube Multidrop dispensing cassette, 5-pack.

Reagent filter, small 8-tube Multidrop dispensing cassette, 5-pack.

Reagent filter, small long-tube Multidrop dispensing cassette.

Reagent filter, small 8-tube Multidrop dispensing cassette.

Power Cord. Power cord for microlab 600 diluter / dispensers - United Kingdom, Ireland, Malaysia, Middle East

Power Cord. Power cord for microlab 600 diluter / dispensers - Continental Europe, Russia, Schuko

50mL Feed Tubing. This replacement 50 mL feed tubing is for use with the Calibrex 520/521 bottle top dispenser.

20mL Feed Tubing. This replacement 20 mL feed tubing is for use with the Calibrex 520/521 bottle top dispenser.

Lower Body Assembly. 50ul lower body assembly replacement part for the Hamilton SoftGrip Pipettes.

Lower Body Assembly. 10ul lower body assembly replacement part for the Hamilton SoftGrip Pipettes.

Container. 50 mL, Work Station Bulk Container

Dispenser. 50 mL, Work Station dispenser

Work Station. Work station for 2 Acura 841

Pipette stand 337. pastel rose

Pipette stand 337. vanilla yellow

Pipette stand 337. mint green

Pipette stand 337. ice blue

Detachable Valve. Detachable valve, reverse modus

Detachable Valve. Detachable valve, standard (as supplied on 164/174 models)

Spare Barrel. Spare barrel, clear glass, 0.5 - 5 mL, for enhanced plunger tighness set

Plunger Tightness Set. Enhanced plunger tighness set, for 5 mL models 164-172-173-174

Conversion Set. Slant vial holder conversion set

Spare Part Kit. 0.3 mL, spare part kit

Barrel. 20 mL barrels, pvc protection sleeve

Barrel. 5 mL barrels, pvc protection sleeve

Barrel. 2 mL barrels, PVC protection sleeve

Barrel. 0.3 and 0.5 mL barrels, PVC protection Sleeve

Barrel for modified 20 mL model, serial number 12021001

Glass barrel 0.1 - 1 mL. Glass Barrel

Glass barrel 0.1 - 0.5 mL. Glass Barrel

Glass barrel 0.025 - 0.3 mL. Glass Barrel

Lab canula 1.2 x 50 mm. Lab Canula

Lab canula 0.8 x 40 mm. Lab Canula

Dispensing Cassette. These dispensing cassettes (5 pack) are specially designed for small volume dispensing. The metal tip combined with its design guarantees high speed liquid dispensing. Recommended for dispensing liquids containing proteins with special surface tension properties.

Dispensing Cassette. These dispensing cassettes (5 pack) are specially designed for small volume dispensing. The plastic tip and tube diameter are optimized that enable reliable and reproducible dispensing, especially with aqueous buffers, reagents and solutions.

High Flow Manifold System with Hard Connect Fittings. 75L-100L Reactor Capacity, M30 Circulator Size End Fitting, 1-1/2in Beaded Pipe Triple Insulated Flexible Hose, -60 to 200 degC Temperature Range. System is supplied with 3/4in ID Triple Insulated Flexible Hose.

High Flow Manifold System with Hard Connect Fittings. 30L-50L Reactor Capacity, M30 Circulator Size End Fitting, 1in Beaded Pipe Triple Insulated Flexible Hose, -60 to 200 degC Temperature Range. System is supplied with 3/4in ID Triple Insulated Flexible Hose.

High Flow Manifold System with Hard Connect Fittings. 10L-20L Reactor Capacity, M30 Circulator Size End Fitting, 1in Beaded Pipe Triple Insulated Flexible Hose, -60 to 200 degC Temperature Range. System is supplied with 3/4in ID Triple Insulated Flexible Hose.

High Flow Manifold System with Hard Connect Fittings. 10L-20L Reactor Capacity, M16 Circulator Size End Fitting, 1in Beaded Pipe Triple Insulated Flexible Hose, -60 to 200 degC Temperature Range. System is supplied with 3/4in ID Triple Insulated Flexible Hose.

SUCTION TUBE 4 FEET LONG - 9315010

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820014

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820013

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820012

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820011

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820010

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820009

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820008

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820007

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820006

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820005

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820004

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820003

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820002

Socorexâ„¢ Smarties Caps for Socorexâ„¢ AcuraÂ® Manual Pipettors, Wheaton - W820001

WHITE SMARTIES CS6 - W820000

Probe Microlab 500 Concorde Convertible Tip. Microlab 500 Concorde Convertible Tip Hand Probe, Gauge 12 or 18 gauge, Electrical Connection Probe Receptacle, Cable Length 4 feet

Socorexâ„¢ Dosysâ„¢ 164/174 Self-Refilling Premium Syringes, DWK Life Sciences - 851372, Dosys 174 Syringes with Pistol-Handle Grip

Calibra Digital Micropipettor, Variable Volume. Volume: 1.0-10uL. Increments: 0.05uL. Accuracy: +-1.0% at 10uL. Color: Natural. Twin cams with precalibrated steps. Stainless steel and fluoropolymer resin plunger. Allen wrench for in-lab calibration. Autoclavable.

PLATE HT.60 PK100 - D16110024973

PLATE L.100 PK100 - D16110021814

PLATE S.200 PK100 - D16110021808

PLATE S.100 PK100 - D16110021802

PLATE S.60 PK100 - D16110021796

PIPETTE STAND ACRYLIC 6-PLACE BLUE - HS20613C

WALL MOUNT FOR XPLORER - 4861615001

MEASURING STICK LIQUID LEVEL - LMS-36

PIPETMAXÂ® Sample Handling Racks, Gilson - 32000303, MICROAMP short 96 PCR tube rack

Accessories for PIPETMAXÂ® Automated Pipetting Solution, Gilson - 32000262, Adapter 424 CT CIR TMP flip cap 1.5 - 2 ml

Accessories for PIPETMAXÂ® Automated Pipetting Solution, Gilson - 32000261, Adapter 425 CT CIR TMP screw cap 0.5 - 2 ml

Accessories for PIPETMAXÂ® Automated Pipetting Solution, Gilson - 32000260, Adapter 496 CT CIR TMP 96 PCR tube

PIPETMAXÂ® Sample Handling Racks, Gilson - 32000197, Rack code 425, holds 24Ã— 1.5 - 2.0 ml screw cap tubes

Accessories for PIPETMAXÂ® Automated Pipetting Solution, Gilson - 32000391, PIPETMAX D1200 tip reload box

Accessories for PIPETMAXÂ® Automated Pipetting Solution, Gilson - 32000177, PIPETMAX off-bed tip disposal riser

CATRIDGE 20UL FOR PICO 8 8-CH CS 20 - LTR0004

CATRIDGE 200UL FOR PICO 8 4-CH CS20 - LTR0003

CATRIDGE 200UL FOR PICO 1 1-CH CS30 - LTR0002

CATRIDGE 20UL FOR PICO 1 1-CH CS30 - LTR0001

Dionex Autosampler Probe Tip, Environmental Express - K1001, Environmental ExpressÂ® stainless steel probe tip for Dionex AS/40 and AS-DV autosamplers

Argos TechnologiesÂ® Stands for OmegaÂ® Pipettors, Cole Parmer. Argos TechnologiesÂ® Stands for OmegaÂ® Pipettors, Cole-Parmer - 24501-40, Battery charging stand

Lubrication Box O-Rings Platemaster. Lubrication Box of O-rings is an accessory for the PLATEMASTER recommend lightly lubricating the external O-ring between regular maintenance intervals in situations of intensive use and to avoid ill-fitting tips

Height Stop Pipetting Head Platemaster. Height Stop, Pipetting Head Height Adjuster is an accessory for the PLATEMASTER that allows for easy altering of pipetting height, ensuring appropriate tip depth within shallow- or deep-well microplates

Tissue culture Nose Retrofit Kit with 4 filters.

Pipet Can Ss W/Silicone Pad 6.6X6.6X46Cm. Pipette can, constructed of heavy gauge SST and are rectangular for easy stacking and storage of pipettes, sterilized by autoclave or dry heat, without silicone pads, 25mL serological, Dimensions: 6.6X6.6X46 CM

Pipet Can Ss W/O Silcon Pad 6.6X6.6X41Cm. Pipette can, constructed of heavy gauge SST and are rectangular for easy stacking and storage of pipettes, sterilized by autoclave or dry heat, without silicone pads, 0.1 - 5mL or 10mL serological, Dimensions: 6.6

Filter set repalcement, 0.2um, 5x15mm.

CARROUSEL Pipette Stand, For DISTRIMAN, Holds up to 7 pipettes.

SINGLE Pipette Holder, For PIPETMAN Classic pipettes.

TRIO Pipette Stand, For PIPETMAN Classic, Holds up to 3 pipettes.

PIPETMAN M Single Stand Charging Adapter, for CARROUSEL Pipette Stand.

E1-ClipTip Software Upgrade Kit, intended for original E1-ClipTip pipettes with software version 1.27 or older, kit consists of: a USB cable, a license code, software upgrade instructions, allows you to program your pipett

Nexty Volume Change Tool Kit, Includes Electoric Balance, Pipette Tip, Distilled Water, Thermometer, Hygrometer, Barometer, Lock-spanner, Manual, Seal, Reduce error in volume setting, Reduce disposal costs

Acura Silicone Grease for manual Pipettes, Size: 10 gram Tube.

Acura Silicone Grease for manual Pipettes, Size: 1 gram Tube.

SCIENCEWARE Bobbitt Valve. Unique, on/off valve for dispensing liquids from aspirator bottles. For use with 6.35 to 7.93mm ID tubing. Polypropylene and silicone rubber. Internal parts coated with fluorocarbon resin for maximum chemical resistance. Length: 10.2cm. Autoclavable at 121[degree]C.

Electric Pipet Dryer. 275W heating element. 115VAC. 59.7Hx26.7Base DiameterX14cm Cylinder Diameter. Accommodates 53593-002 pipet holder, or holder with a diameter up to 14cm. Pipets dry in about one hour. Made of 0.018 type 302 stainless steel. For maximum pipet length: 37.5cm.

Pipet Holder for Automatic Pipet Washer. Replacement stainless steel pipet holder for 53582-008.

Stainless Steel Pipet Boxes. Square. Size: 5x5x23.5cm. Used to hold and protect pipets during sterilization. Constructed of stainless steel for high corrosion resistance. Eliminates the possibility of container rolling off the benchtop. Intended for holding Pasteur pipets 14.6cm to 22.9cm long.

Glass Capillary Bores for VWR Microdispensers. Replacement bores for the 53506-336 VWR microdispenser. Volume: 3.33/6.66uL. Color: Orange. Pack of 100.

Polycarbonate Bores. An accessory for Drummond Pipet-Aids.

MICROCAP 250.0UL - 1-000-2500

MICROCAP 1.5UL 32MM PK100 - 1-000-0015

MICROCAP .4UL 32MM PK100 - 1-000-0004

VALVE ONLY - 3-000-092

Valve Assembly Parts kit, For 20mL self-refilling syringe. Valve Assembly Parts Kit for Wheaton self-refilling syringe includes 2 fluoropolymer resin washers, 2 corrosion-resistant springs, 2 stainless steel balls, and Viton washer for barrel (except for 20mL syringe). Solid Calibration.

Valve Assembly Parts kit, Luer lock, with three-way valve for 20mL syringe. For Wheaton self-refilling syringe includes 2 fluoropolymer resin washers, 2 corrosion-resistant springs, 2 stainless steel balls, and Viton washer for barrel (except for 20mL syringe). Solid Calibration.

MultidropÂ® Combi Reagent Dispenser, Thermo Scientific - 24072677, Dispensing Cassettes, Long Standard Tube

Microtest Manifolds For Self-Refilling Syringes, 12 position, angular. Number of Wells : 96. Center to Center : 9mm.

Microtest Manifolds For Self-Refilling Syringes, 8 position, angular. Number of Wells : 96. Center to Center : 9mm.

Microtest Manifolds For Self-Refilling Syringes, 4 position, angular. Number of Wells : 24. Center to Center : 20mm.

Microtest Manifolds For Self-Refilling Syringes, 8 position, straight. Number of Wells : 96. Center to Center : 9mm.

Microtest Manifolds For Self-Refilling Syringes, 4 position, straight. Number of Wells : 24. Center to Center : 20mm.

Acura Variable VolumeMulti-Channel Micropipettes, Replacement Nozzles, Nozzle, 50-200ul. Not autoclavable. Ideal for 96-well microassay plates. Precision micrometer setting in 1ul increments. Simultaneous tip ejection.

Pipettor Stand, ABS, Blue, 6-Place, Acrylic stands are translucent; sturdy ABS stands are solid colors.

VWR Replacement Pestle Adapter. Replacement adapter for VWR pestle motor (47747-370).

Lincoln Jaw Clamp - H-8250, Lincoln Jaw Clamp

Burette Clamp. Round, wall-mounting, jaw construction, brass, nickel-plated. Jaw opening 3/8in to 3/4in (10mm to 19mm).

Table/Shelf Clamp. For use with Dispensette remote dispensing system. Allows mounting of dispenser on table or shelf.

Dispensing Cassette. For use with Multidrop Micro Microplate Dispenser (14230-366).

Dispensing Cassette. With extruded covers. For use with Multidrop 384 and Multidrop DW Microplate Dispensers (14230-364, -350).

MULTIDROP MICRO METAL CASSETE. Metal dispensing kit for the Multidrop Micro bulk reagent dispenser. Special optimized design for extended runs with protein and viscose solutions.

Accessories for MultidropÂ® DW Reagent Dispenser, Thermo Scientific - 24072672, Standard Tube Dispensing Cassette

Accessories for MultidropÂ® DW Reagent Dispenser, Thermo Scientific - 24072671, Standard Tube Dispensing Cassette

Medium Dispenser. Stores pipet tips, filters, vials, caps, swabs, and other consumables. See-through, front access, hinged door for easy identification. Single bin. Chemically-resistant. Fitted top for easy filling. Dimensions: 30.5Lx22.9Hx16Dcm.

Static Peltier ALP, with three labware adapters (one 96-well PCR, one 384-well PCR, and one Flat Bottom Plate adapter). Humidity: Ambient, Operating Humidity: 10% to 80% Relative Humidity (non-condensing), Operating Temperature Range: 15 degree C to 32 degree C

Biomek 4000 P1000SL Single-Tip Pipette Tool, Capacity: 100-1000uL.

Biomek 4000 MP1000 Eight-Tip Pipette Tool, Capacity: 100-1000uL for each tip.

Single-Position ALP. ALP, Standard Single-Position, with static platform, Includes single-position ALP for positioning of one standard 96 and/or 384 well microtiter plates as singles or in stacks with spacing to support Biomek gripper and/or robotic manipulation

Module Accessory, Right Side, for Biomek 3000 worksurface, side module cover is removable for easy cleaning, and a side module spill tray. Side module holds two labware or pipette tip rack holders, two tool racks, or one test tube rack holder.

Biomek Windows 7 New Installation kit with Biomek Software 4.1 with Accessory Support.

Pipette Tool. P200L Tool, Single-Tip Pipette with LLS, Biomek 3000, Capacity: 5 to 200 uL, Includes true 9mm center-to-center spacing and can be used with SBS/ANSI standard labware. It can also accurately transfer volumes down to 1 uL

P20 Tool, 1-Tip, Biomek 3000, MP20 Eight-Tip Pipette Tool, Capacity: 1 to 20 uL for each tip, Includes true 9 mm center-to-center spacing and can be used with SBS/ANSI standard labware.

Gripper Tool System, Biomek 3000, includes: Gripper Tool, Gripper Tool Rack, Calibration Plate, Disposal Option, Disposal Bags, Spare Gripper Pads, Used to move labware and devices around the Biomek worksurface

Biomek 4000 Off Deck Mounting kit. Biomek 4000 Off Deck Mounting Kit, Left, Frees up 2 deck positions providing more space for labware, Gripper Rack - Front Only, Liquid Waste Disposal - Rear Only, Pipetting Tool Rack, with mounting adapter, mounting hardware, Off Deck Tool Rack

Biomek 4000 Off Deck Gripper Rack, Packaged.

Biomek 4000 Liquid Waste Disposal kit. Biomek 4000 Liquid Waste Disposal Kit, for liquid waste disposal fed either off or on deck, Can be used in off deck location to save deck space, Includes liquid drain, tubing, and waste bottle

Orbital Shaker. Biomek Shaking ALP (Orbital), Single-Position, Includes CAN communications cable, Positionable in any location on the Biomek work area.

Rack Holder. Biomek 3000 Pipette Tip Rack Holder, Black, Holds one P20 or P250 and rack of 96 tips, pipette tip rack holder use single worksurface positions

Holder, Labware, Gray, for Biomek 2000 worksurface, Holds one P20, P250 or P1000 pipette tip rack. Holds one multiwell plate, reservoir holder or 24-place tube rack

Module Accessory, Left Side, for Biomek 3000 worksurface, side module cover is removable for easy cleaning, and a side module spill tray. Side module holds two labware or pipette tip rack holders, two tool racks, or one test tube rack holder.

Biomek 4000 Integration Deck, Compatible with Standard Single-Position ALP, Orbital Shaking ALP, Static Peltier ALP, and Shaking Peltier ALP. Provides storage for lab notebooks, tools, pipetting tips, labware, etc.

Biomek 4000 AccuFrame kit. Biomek 4000 AccuFrame Kit, Used on the main deck and side module positions. Off-Deck Tool Rack, Off-Deck Gripper Rack, and Liquid Waste Stations must be framed manually.

AirShield Tubing.